Hi guys I dissamble several times my xda Orbit using a maual posted in this excellent forum, but a month ago my Orbit fall down and some tears are broken in the side of the front cover, and dont close well.
I buy a replacement housing but I dont know how transfer the leds and vibrator to new housing without kill it
Please anybody do this before, let me know how you did it?
If you did with a Artemis and not a Orbit let me know too?
Or if you know that somebody have a broken Orbit but the front cover is intact and he/she want to sell, let me know please.
I have original parts of artemis from dead devices. PM me.
Related
hi
i'm a proud owner of the blue angel (imate flavor ) but the only thing i'd like is to have the xdaiis black cover.... does anyone have any idea where i can buy it? i emailed o2 but they wouldnt reply.... any help appreciated.....
Get a can of spray paint and do it yourself!
well i tried it twice before on my old imate (xdaII) one of them by a professional... but for some reason both didn't turn out good lookin... so i was wondering if its possible to get like spare parts from o2..
i also got a bad bump an the top right corner so i was thinkin about changin the whole cover.....so anyone?
you may think its black but is a dark silver. i wouldn't bother trying to change the cover.
but just think if you were to accidentally to lose you blue angel the nice insurance guys might replace it with a black one?
well whatever color it i just love it...and where i'm currently livin...no insurance, no xda's...just imates....
is it that hard to contacts o2 for spare parts?
come on cant anyone get me a clear answer if i could get my hands on one??? it'd be returnable favor
have a look on ebay sometimes xda2s come up as parts
Hi all,
I droped my qtek s200 a few days ago now iam looking for a orginal compleet housing for my qtek s200 ( face plate,chassis,back complete with silver windows mobile logo and chrome strips ) a orginal Dopod is fine to no 02 stuff, i did a few searches on the forums but only thing i found was o2 stuff and a spv housing.
who can me help me?
regards
Mike
probally ia'm going to buy the orange housing spv, my question how does a fibreglass pencil works?
Hi,
so you want to remove the writing on the case?
ive been hearing 'sugar cubes' work on removing logo's on the I mate jam casing. Its worth a shot.
Whitemoo.
Be careful! The Jam had an aluminium case and sugar cubes can't scratch aluminium but the Jamin's case is made of plastic which might get scratched! Try on a corner or somewhere that scratches can't be seen before you do it on the face of the Prophet.
tx for the info, iam probally going to do it with a fibreglass pencil first i need to wait what my insurance will do because my touchscreen died :S it can't be touched.
Repose said:
tx for the info, iam probally going to do it with a fibreglass pencil first i need to wait what my insurance will do because my touchscreen died :S it can't be touched.
Click to expand...
Click to collapse
I've done it with a sugar cube on my spv m600 (prophet) and it worked. ORANGE logo is out now. No scratches and no paint removed
Hi there
I have an SX66 with a cracked digitizer/touchscreen.
The LCD is ok. I removed and replaced the battery, unit starts ok, but, of course, I cannot get by the alignment screen (makes sense).
I have a couple of questions.
First, I have an opportunity to buy another SX66 that has a cracked LCD, but there doesn't "seem" to be a crack in the touchscreen. There is a "spider's-web". Can this be on the LCD? Or I'm thinking that maybe it's on the underside of the touchscreen. Any opinions?
Is it possible to have a cracked/broken lcd and not have an affected touchscreen?
So, the touchscreen 'looks' to be ok, but is there anyway of testing this without removing it? Any opinions? Should I buy his unit and try it?
Second, there are some instructions for replacing touchscreens in an earlier thread. However, there was one comment that said that if I buy the proper touchscreen, soldering/desoldering is not required. Can anyone clarify or confirm that?
Third, is there anyway of determining which touchscreen I require by just the unit serial number? Or do I need to remove it?
I want to take this apart and fix it, but I would rather gather all the info first. Any help would be hugely appreciated!!
Thanks!
Richard
Hi Richard,
Well first off all, let me put your situation into other terms...
You have a really expensive suit jacket with a cashmere liner inside. You snag it on a nail, and now there's a big rip on it. You have the opportunity to buy another really expensive suit jacket with a good exterior, but the cashmere is ripped to shreds inside. Do you buy it and try to sew the two together?
I don't know exactly how crafty you are, but retrofitting a touch screen onto an LCD sounds like a daunting task. Buy a new OEM screen outright and fit it into your SX66. You'll have a lot less to worry about in the long run.
This might help
http://wiki.xda-developers.com/index.php?pagename=BlueangelLCD
2 borken does not make a right (not sure if who said that ;-) )
the price is right?
the cost eaven on ebay dose not justify not getting a new one so here it is im in cambridge and i need a new housing for mine so we can get one i can chang out the screen for you and split the cost is you like this idea email me thanks
Tri. City Ont.
Richard, can you help me
I need buy some partc of my SX66, can you tell me where I can buy.
Thanks a lot
Hector Ruiz
hrvc said:
I need buy some partc of my SX66, can you tell me where I can buy.
Thanks a lot
Hector Ruiz
Click to expand...
Click to collapse
try here
http://www.apexlaptops.co.uk/Blue Angel.htm
I'm from Europe and I bought touchscreen in USA at http://www.pdasmart.com/.
They have also repairing service.
Regards
Same problem
my PDA2K digitizer broken and i'm facing the same problem after upgrading my PPC to WM 2005 but as by my knoweledge their is a systematic way of pressing the buttons to get over the screen alignements? any help
Hi Folks
THis is my first post on the forum.
I have an I-Mate Jamin, and the touch screen is broken, i bought a replacement part and have taken the phone apart, but i've hit a stumbling block, i now have the touch screen/lcd out of the machine.
However im not sure what do do from here, how does the unit come apart so you can change the touch screen. It all seems molded togehter
Or is there a trick to it?
Okay... Not exactly Prophet Mobile 6 so I'll move it...
I'd take a look here for dissasembly. I also think there may be an HTC service manual floating about the FTP so I'll look for that for you...
If you're trying to separate the digitizer and the LCD, I would advise against it as it may go very wrong... I'd personally try and get hold of the LCD+Digitizer module...
A friend has dropped his orbit and it no longer lights up the screen, if anybody is interested in buying it then pm me, the phone itself still works, and it is unlocked to any network, you just cant see whats happening on the screen as thats not lighting up, there is a crack on the outer casing but the screen looks intact, no cracks etc on it, best offer secures.
Whats the price?
PM me.
Thanks
Guys, now XDA has a proper place for this kind of "business".
http://forum.xda-developers.com/forumdisplay.php?f=476