XDAIIS Bluetooth not starting - MDA III, XDA III, PDA2k, 9090 General

I have an annoying problem, when i start the bluetooth on my iis the icon shows as connected but the bluetooth settings (Turn on bluetooth and make device visible) untick them selves meaning i am not connected. Also the blue led does not flash...
The only way i can get the blue tooth working is by doing a soft reset, after a while though i will not be able to start the bluetooth so need to soft reset again...I am running WM5 and the phone is an O2IIs
Any ideas anyone

Related

Need bluetooth help badly!~

Please help me out I'm incredibly frustrated with this thing. I recently got the PDA2k and installed WM05 on it. It looks very nice and it runs speedy with no problems. My problem is the bluetooth which is huge thing to me. Either my headset (Tekkeon Eztalker Mini) is not compatible which I doubt or I'm making a stupid mistake.
This is what I did step by step: I click on the bluetooth icon and turn on the bluetooth, I then put my headset in pairing mode and the imate is able to recognize it and I enter the Pw and I put Set as handsfree. That's it, I would think I would be done at this point yet nothing happens, the headset doesn't do anything and I know its not Tekkeons fault because I was able to hook it up easily with my HP 6315.
So what's going what am I missing?
Also theres a tab at the bottom called "Com Ports" but I only see under this option "Incoming Port", and the description at the top says there should be another option called "New outgoing port". Does this have anything to do with it?
What Am i doing wrong? It's driving me crazy I can't really use the phone without the headset.
help me out pls
Bluetooth
I know the feeling, i have gone back to 2003 cause of that but now i am back on wm5. The bluetooth issue is not fixed yet, it is not stable, it keeps going off. There is a suspend cab file, but it does not work for me yet, also try pokect zen beta. You might get a longer period of bluetooth
thanks for responding, but the problem is not that it suspends or stops working. It doesn't start working at all even though the imate detects it. It's like it's not connected at all, not that it disconnects. I'm doing something wrong I just don't know what.
The bluetooth piece is not faulty and the unit is practically brand new. whats going on?
I used "Display Switch" binded button (From Wisbar Advance 2) or "Toggle Screen" (From SPB Pocket Plus) to turn off the backlight instead of using power button .
This work around will keep bt connection alive.
Note:
1. If you suspend your BA using psShutXP your bt connection .
2. You have to disable auto turn off device under Start -> Setting -> Power
Note:
1. If you suspend your BA using psShutXP your bt connection will be disconnected.
I'm sorry I'm not sure I'm explaining myself correctly. I understand that if the power goes off I will lose the BT connection but the problem is not KEEPING the connection alive, the problem is MAKING the connection. I follow all the steps , the imate recognized the headset but I'm not able to use it..also shouldn't a headset picture show up at the top of the screen when the bt headset is connected (cuz mine doesnt). what am i doing wrong?
thanks.
still need help please.. if someone can walk me through how to setup a bluetooth connection that would be great cuz I apparently haven't done it right.
The headset icon only shows in Phone app
The headset icon only shows up in the Phone application. It no longer is displayed in the notification area (top row).
If your device is paired up, when you make a call, you will see the headset icon in the top right corner.
You may also need to clear any old pairings that you headset has. I have a Jabra 250 and it happens all the time.
there we go you have solved my problem!. I didnt' have to open up the phone application on my hp 6315 to use the bt. So wait can I listen to music with windows media player through the bt headset or does it only work when making phone calls? I was able to listen to music on the HP 6315, is it different with the Imate or is it the NEW 05 os? Please enlighten me
thank you thank you
also one other thing does this mean that if i want to use the headset with the phone that I have to press the answer button on the imate rather than the headset..cuz that would suck big time.
what about when people call me can i answer with the answer button of the bt headset or no?
It works fine with the headset button for answering or hanging up.
Later.......... 8)
droy001 said:
what about when people call me can i answer with the answer button of the bt headset or no?
Click to expand...
Click to collapse

Bluetooth Handsfree problem

Hi All!
I just upgrade my MDA III from WM2k3 to WM2k5 (TuMA 1.4).
All looks very good, but I founf the following problem:
I configure my MDA to use bluetooth hadsfree. When I push the power button to switch off my device, if I receive incomming call, rings only device, but not my hadsfree. When turn on MDA, i see that chackbox indicating on/off bluetooth is unchecked, i.e. mu bluetooth is off. I need to check it again to enable communications between my hadsfree and MDA.
But when my device is turned off, this happens again. In this case i cannot use my bluetooth handsfree, I need to receive phone calls from MDA, and every time manualy turn on bluetooth.
Are there any solutions to fix this problem?

Solved: Problem with Motorola S9 and HTC Touch Dual

Hello Everyone,
i am a proud owner of the S9 bluetooth headset and it worked very well at the beginning (1 day). Than i deletes 2 registry settings as mentioned in a forum somewhere (max bit pool stuff) to get better sound quality.
I dont know if it is the cause of the problem i got now but next day the S9 was gone in the bluetooth device list of my touch dual and cant be found anymore. the strange thing about it is that if i press the telephone button on the S9 the ms voice command icon appears and i can talk to it. also the touch dual seems to use the s9 as headset as the ring tone volume is switched to zero and the headset icon appears in the calling screen (after pressing the send button)
anyway i am not able to conect the s9 for music transfer and that is the problem if got..
any chance to delete the touch dual in the s9 settings so it allows a repairing? or somehow recovering the appearance of the s9 in the device list of the ppc?
any suggestions are welcome.. nice sunday everone
Edit:
Problem solved.. dont know how but the pocket pc found the headset finally again..
Glad that it works again for you.
I have a Blueangle with WM 6.1 and the S9.
Can you get yours to play music and have the display off (not dimmed but off). I have found a device lock that works fine while BT is off however when BT is on and connected to the S9 it always wakes up the screen.
What Version of WM are you running ??
Oops, sounds like my yet-to-be-solved case.
What I have: Qtek 9100 and Jabra BT250v. Some time ago I also deleted this partnership (don`t ask why) and when tried to re-establish it again, the device kept declining the connection with the headset. The device finds the headset, asks for a password and whatever combination of digits I enter it rejects to establish a new partnership.
I guess, the problem is in registry. Anyone could help with this one? What should I fix in a registry to re-pair the headset and device? Thanks in advance.
Ok in case anyone else got that problem i guess i know what it caused: i paired the bluetooth headset with my laptop after pairing it with the pocket pc. and although no service could be used (ms bluetooth stack) the S9 didnt use the PPC as standard music device but the laptop. after deleting the pairing from the laptop the S9 i could pair it to the ppc again.
about MDAIIIUser's problem: dont know any way of listening to music with the device turned off. i use AE Button to switch display off by double cklicking the green button or starting S2U2 by double clicking the red one. anyway, if display is switched off and i press a button on the bluetooth headset the display turns on again thats why i just lock the device and dont care if the display is on for some minutes in my pocket..

bluetooth problems

i updated my touch to 6.1 now it wont find my motorola S9 headset what do i do
my s9 works fine on my touch and titan wm 6.1....make sure when u first power on your s9 the blue light stays solid...this means its in pairing mode, then open up connections manager, click settings, bluetooth, find new device and it should find it in a few seconds
It should work just fine, upgrading to WM6.1 doesn't change the way your bluetooth functions.
i've had trouble pairing my bluetooth as well. instead of going to bluetooth explorer, go to settings > connections > bluetooth > add new device (even if its in the list still click this). after it finds the headset go through all the settings then when your done tap and hold where it says S9 (or whatever your headset is called) then choose set as wireless stereo, then it will say your device wants to connect. if it says the passcode is invalid try again and it should work. while this way of pairing my headset can take around 5 min. or more, its the only way it seems to be working.
i am not sure if your phone is showing the same symptoms as mine or not, but if this is a common problem then i hope someone smarter than me can fix it, becaue the way i have to set it up is a real pain.

Problem with BT stack

All of a sudden when I try to start BT or use a BT device I get an error saying BT can not be started because the BT stack could not start. If I soft reset I can then start BT without issue. I decided to just leave BT on over the weekend since I was driving and it connects to my car stereo automatically when on. This morning, I go to sync using BT and the icon is in the tray, but I get the BT can't connect error. Soft reset and works fine. What could be causing this?
Is this with the stock rom or a custom one?
I have also experienced this, but I build/flash custom roms so often, I never bother to track down or even research the issue.
Best regards,
-boggsie
In my sig, OEM AT$T ROM.
OK, I think I have found the problem. I have CleanRAM scheduled to run every morning at 7:45 so that my Tilt 2 starts the day fresh. It is configured to run a Level 2 cleaning. Apparently, this is causing some process to be shut down relative to the Bluetooth stack that then causes the error when trying to use Bluetooth. It doesn't shut down BT completely, so the Taskbar icon remains. I'll either have to drop CleanRAM down to Level 1 or just do a soft reset every morning to re-establish BT. I wonder if the developer of CleanRAM is aware of this issue?

Categories

Resources