Hi All!
I just upgrade my MDA III from WM2k3 to WM2k5 (TuMA 1.4).
All looks very good, but I founf the following problem:
I configure my MDA to use bluetooth hadsfree. When I push the power button to switch off my device, if I receive incomming call, rings only device, but not my hadsfree. When turn on MDA, i see that chackbox indicating on/off bluetooth is unchecked, i.e. mu bluetooth is off. I need to check it again to enable communications between my hadsfree and MDA.
But when my device is turned off, this happens again. In this case i cannot use my bluetooth handsfree, I need to receive phone calls from MDA, and every time manualy turn on bluetooth.
Are there any solutions to fix this problem?
Related
Has anyone been sucessfull in using a Hands Free System in any Automobile with the PDA2K? If so what is your Bluetooth Stack & is it modified? Is there a Modified Bluetooth Stack out there able to work in a Hands Free System? There must be someone out there who can make the Right Bluetooth Stack for the PDA2K!!!! :roll: :idea:
I use a parrot CK3000 in my car (I used it with my nokia 6310i before)
It does what it has to do , except for the audio volume setting (I talked to parrot and this will be solved in the next carkit firmware)
I used my 6310i to set the initial volume
Hi,
I have Sonyericssons Bluetooth handsfree HCB-30. It work like a dream. Connects perfect every time. I don't even think about if it have connect to the hands free or not. Work even better with my Qtek 9090 then with my P910.
I have the XDA2s working with the SE HCB-30 in my Audi with absolutely no problems so far. BT stack is 3500.
Rajesh
I use my MDA III with the build in Audi BT handsfree (Cullmann third generation).
I do have problems with the volume control (always jumps back to min) and even worse the connection is lost when I get an incoming call. The ring sound is still coming via the handsfree-speakers, but as soon as I pick up (doesn't matter if via green hardware-button or touchscreen) the MDA III shows the handsfree-symbol on top with a "?" in it and I have to use the MDA III to speak/hear. After I hung up the connection is established again almost immediately (you hear a "pling" sound).
When I make a phone call connection stays up, I can use the handsfree system...
Anyone an idea? What does that question-mark symbol mean?
PEACE AND B WILD!
OK - let me get this straight. This is to those of you who are using a bluetooth headset in your vehicles.
Are you saying that without touching your PDA you are able to press a button on your headset, speak the name of a contact and get connected?
I have been able to do this on every bluetooth phone I have owned, but with my XDA I have to press a button to bring up the voice dial app which then proceeds to try and call a random person in my contacts list.
hfp
I asked ONLY FOR HANDS FREE PROFILE, NOT HEADSET PROFILE. With the latest rom upgrade the HFP does not work. Imate PDA2K supports both the Hfp & the Headset Profile.
I have a O2 XDAIIs been tring to find what exactly I need to do to ativate voice command with my bluetooth headset I have being looking
through the forums but am unable to find the sollution if there is one can someone point me in the right dirrection PLEASE GOING NUTS
I don't think it is possible. Problems with the integratino of Windows Mobile and the Bluetooth Static/Profiles.
So, is this a Blue Angel Issue, a Windows Moblie SE isuse, or both?
If just a Windows Moblie SE Issue does anyone know if WM2005 corrects this?
Thanks!
Its a windows issue rather than a BA issue I think, however there is a partial solution.
Press the connect button on your BT headset as if you were answering a call; then press the "contacts" button on your BA. You should then be able to speak into your BT headset. Once finished, disconnect the BT headset as normal
Not perfect, but a reasonable workaround. I have my BA in a cradle in my car & hardly need to glance at it in order to find the contacts button & get nearly-handsfree operation
Its a windows issue rather than a BA issue I think, however there is a partial solution.
Press the connect button on your BT headset as if you were answering a call; then press the "contacts" button on your BA. You should then be able to speak into your BT headset. Once finished, disconnect the BT headset as normal
Not perfect, but a reasonable workaround. I have my BA in a cradle in my car & hardly need to glance at it in order to find the contacts button & get nearly-handsfree operation
Dear weasel,
I have tried what you have advised to get BT head set to activate voice command. However, it don't work. Is there any thing else that I can do? I really hope I can dial a call via BT haed set.
Thank you.
Please help me out I'm incredibly frustrated with this thing. I recently got the PDA2k and installed WM05 on it. It looks very nice and it runs speedy with no problems. My problem is the bluetooth which is huge thing to me. Either my headset (Tekkeon Eztalker Mini) is not compatible which I doubt or I'm making a stupid mistake.
This is what I did step by step: I click on the bluetooth icon and turn on the bluetooth, I then put my headset in pairing mode and the imate is able to recognize it and I enter the Pw and I put Set as handsfree. That's it, I would think I would be done at this point yet nothing happens, the headset doesn't do anything and I know its not Tekkeons fault because I was able to hook it up easily with my HP 6315.
So what's going what am I missing?
Also theres a tab at the bottom called "Com Ports" but I only see under this option "Incoming Port", and the description at the top says there should be another option called "New outgoing port". Does this have anything to do with it?
What Am i doing wrong? It's driving me crazy I can't really use the phone without the headset.
help me out pls
Bluetooth
I know the feeling, i have gone back to 2003 cause of that but now i am back on wm5. The bluetooth issue is not fixed yet, it is not stable, it keeps going off. There is a suspend cab file, but it does not work for me yet, also try pokect zen beta. You might get a longer period of bluetooth
thanks for responding, but the problem is not that it suspends or stops working. It doesn't start working at all even though the imate detects it. It's like it's not connected at all, not that it disconnects. I'm doing something wrong I just don't know what.
The bluetooth piece is not faulty and the unit is practically brand new. whats going on?
I used "Display Switch" binded button (From Wisbar Advance 2) or "Toggle Screen" (From SPB Pocket Plus) to turn off the backlight instead of using power button .
This work around will keep bt connection alive.
Note:
1. If you suspend your BA using psShutXP your bt connection .
2. You have to disable auto turn off device under Start -> Setting -> Power
Note:
1. If you suspend your BA using psShutXP your bt connection will be disconnected.
I'm sorry I'm not sure I'm explaining myself correctly. I understand that if the power goes off I will lose the BT connection but the problem is not KEEPING the connection alive, the problem is MAKING the connection. I follow all the steps , the imate recognized the headset but I'm not able to use it..also shouldn't a headset picture show up at the top of the screen when the bt headset is connected (cuz mine doesnt). what am i doing wrong?
thanks.
still need help please.. if someone can walk me through how to setup a bluetooth connection that would be great cuz I apparently haven't done it right.
The headset icon only shows in Phone app
The headset icon only shows up in the Phone application. It no longer is displayed in the notification area (top row).
If your device is paired up, when you make a call, you will see the headset icon in the top right corner.
You may also need to clear any old pairings that you headset has. I have a Jabra 250 and it happens all the time.
there we go you have solved my problem!. I didnt' have to open up the phone application on my hp 6315 to use the bt. So wait can I listen to music with windows media player through the bt headset or does it only work when making phone calls? I was able to listen to music on the HP 6315, is it different with the Imate or is it the NEW 05 os? Please enlighten me
thank you thank you
also one other thing does this mean that if i want to use the headset with the phone that I have to press the answer button on the imate rather than the headset..cuz that would suck big time.
what about when people call me can i answer with the answer button of the bt headset or no?
It works fine with the headset button for answering or hanging up.
Later.......... 8)
droy001 said:
what about when people call me can i answer with the answer button of the bt headset or no?
Click to expand...
Click to collapse
I am having some issues w/ WM6 and my Plantronics 640 headset. After a call or two, when I go to initiate a call from the telephone (with handsfree on), the call immediately connects and disconnects right away.
If I disable bluetooth, it works fine using the phone.. If I re-enable bluetooth, I will get one or two calls and then the same behavior comes back.
BT
Try to leave the unit on while calling.
So, go into setting, power and take out the tickmarks for 'switch off after xx'.
There's something flaky on the BT implementation and the unit going auto-off. No expert, but it worked for me on my BT carkit.
Hello all. I'm new to windows mobile but not to smartphones. For some reason my bluetooth headset is not working. I have not installed TomTom or had any error messages, basically I turn on the bluetooth function on my TP2, then turn on my headset, it goes to search and never finds my headset. It finds everything else, my blackberry, another cell phone, but not my headset. Any ideas?
Headset not in pairing mode or not visible? If you have another bt device, use that to test.
I thought I had it in pairing mode but apparently I didn't lol. Problem solved, thanks!