Bluetooth not working - Touch Pro2, Tilt 2 Windows Mobile General

Hello all. I'm new to windows mobile but not to smartphones. For some reason my bluetooth headset is not working. I have not installed TomTom or had any error messages, basically I turn on the bluetooth function on my TP2, then turn on my headset, it goes to search and never finds my headset. It finds everything else, my blackberry, another cell phone, but not my headset. Any ideas?

Headset not in pairing mode or not visible? If you have another bt device, use that to test.

I thought I had it in pairing mode but apparently I didn't lol. Problem solved, thanks!

Related

Unable to auto detect bluetooth after pairing

Hi,
i had a question regarding the connectivity of the bluetooth. I am currently holding hp ipaq 6828 and itech clip radio bluetooth headset. I am able to pair the phone and the bluetooth headset. The probelm i faced is i switched on my bluetooth headset and my pda in discoverable mode. I am unable to auto pair it. Is it that i need to install some third party software in order to let it auto pairing or there is no way it can auto pairing like Sony Ericsson. Please advise.
Thanks
John
no idea what you mean by auto pairing, but the HEADSET needs to be in discoverable mode, not the phone. the phones BT just needs to be on. once the headset is in discoverable, (i.e. the light is steady-not always.. just on the ones ive used), try to pair it from the phone.
Good luck.
-Nstefanelli-

problems with bluetooth headset

Hello
i have a problem with my bluetooth headset. its a hama voice pro
mye phone is a htc touch pro
pairing works ok
if i klick on the phone button there is also a little headset icon so i suppose its in hands free mode.
but i cant receive calls, in fact if i try calling myself (from another phone) a voice tells me that i'm not reachable. like if i had no network.
if i then turn bluetooth off i'm reachable again and everything is fine.
same with bluetooth on but no headset paired.
anybody encountered this problem before and/or has a solution or something ?
thx
seemed to be a strange networking problem. now resolved i think or hope

Mediaplayer and bluetooth wireless stereo

I have a Jabra BT620s bluetooth wireless stereo headset which I use as an headset and my music headset on the touch hd. I paired them succesfully and playing music with mediaplayer works perfectly.
The problem is when I turn on my Jabra headset. It pairs with my phone fine, but it isnt set as wireless stereo on start. So I have to set it in the bluetooth configuration screen everytime I turn the headset on, cause else the music plays over the speaker of the phone.
Is there anyway to let windows mobile always be forced to set the headset as wireless stereo?
Same problem with Funkwerk EGO Talk
I've have got the same problem with Funkwerk EGO Talk Bluetooth carkit with A2DP. Pairs at the start with Headset Profile, so calling works(except the hangup button btw, ?which redails?? most of the time). But it doesn't start the wireless stereo profile.
I have to "Set as wireless Stereo" everytime i reconnect with the carkit
Anyone has a solution or workaround to start "Set as Wireless Stereo" automaticly or at least in 1 button?
Guys, using the search function would have turned up the following solutions found previously on these forums:
a) use Mortscript to macro the key presses
b) firmware update the headset (i.e. Jabra)
c) try turning on music and bluetooth before the headset - worked for some people
I have the same problem as you, any other suggestions?
I've the same problem with Moto music/blutooth headset
Hmmm
I don't have this problem with my Sony-E HBH BT set. Each time I turn it on the pairing is automatic and get stereo immediately.
I also can have the pocket player or TF3D media player running or not and it will change "on the fly" to BT when I turn on the headset.
No problem here with Motorola S805's.
I turn the phone BT on, turn the headphones on, press play on the headphones and get music.
I have the same problem with my motorola S705
Auto pairing with calls is ok but not with stereo A2DP. I must turn headset on manually in the bluetooth otpions which is quite long and annoying.
Pairing was working good with my TyTN. So there might be a problem somewhere
I've had some problems with my Samsung SBH170 not connecting at all.
I removed them from the BT settings and repaired, now they are found with out problems, allthough not very quickly.
In 'Advanced Configuration Tool 3.3' I came across 'Bluetooth Audio Gateway Service' which was disabeled, I enabled it and rebooted, but it doesn't seem to make any difference on my machine. According to this thread it may be required to enable audio over bluetooth: http://forum.xda-developers.com/showthread.php?t=424424
Regards JD

bluetooth paring problems WM6.5

Yesterdaty I updated to WM6.5 and now try to get everything working again. Somehow my TP2 won't pair with my bluetooth carkit anymore. With WM6.1 this was no problem. The phone still pairs perfectly with my computer (also bluetooth connection) so I think the bluetooth connection is ok.
When parining to my carkit it finds the device, then I have to enter a password on the TP2, and after that it just sais "pairing connection failed", and it will not work. I am sure the password is not changed since yesterday. I tried it several times. I do not know what to do anymore. Could this be a setting somewhere? I get the feeling my password is not send properly but have no idea.
Meanwhile I tried pairing my carkit with another phone and no problems there. So my conclusion is: something has changed with bluetooth, updating to WM6.5 which makes it now impossible to pair my TP2 with my carkit.
Is there maybe a programm for the TP2 which give me more controll over bluetooth (like maybe go to an older standard)?
I have exactly the same problem as you
good to hear I am not the only one. Hope someone will come up with a solution for this.
I did nor observed any issues when pairing my TP2 after reflashing to WM6.5
There is another issue however - I can not hear any voice until it is charging.
Unplugging of the charger fixes this issue immediately. Horrible...
Seems, HTC guys are saving money on testing by using us as Beta Customers.
Would a custom ROM be a solution for us?
I updated to the "energy 6.5.1 rom" and guess what..............
The same problem. The rom is very nice, but my TP2 still won't pair with my BT carkit which is very big problem for me.
Is there maybe a way to downgrade just the BT part of a rom to WM6.1. I read on different forums there is something that is called a BT stack. Could this be the problem?
I have a ton of problems with bluetooth pairing now. However, I don't know whether it's the fault of 6.5 or the Tilt 2. Here is what I am experiencing...
- On car deck or headphones, the skip buttons don't do anything
- on car deck or headphones, I have to disconnect Stereo Audio and then reconnect to actually get sound. It NEVER works when it auto connects.
- Music will do a brief skip when you shut the screen off
- Stupid message about volume control every time it connects (resolved by switching to custom rom)
- SMS or any kind of alert tone now turns music way down so that the tone is the only thing you hear. Which is super awesome when I'm driving my drunk friends around and they are singing along to a song when suddenly it mutes so everyone can hear my incoming text message.
Not a single one of these issues existed when I had my Fuze.
Same here
My bt headset (sony hbh ds970) and simply does not find the pairing...
I asume is a problem related to energy´s ROM
orb3000 said:
Same here
My bt headset (sony hbh ds970) and simply does not find the pairing...
I asume is a problem related to energy´s ROM
Click to expand...
Click to collapse
No I do not think so, because I used the official WM6.5 with the same problem. Does someone know a way around this issue. I strongly believe that if only I could pair I have some options to work with it (in 6.1 it worked like a charm). If I only could pair without having to send the passkey it would be great step forward. I presume with sending the passkey, the bluetooth of the TP2 sends out other "rubbish" that confuses my carkit.
My problem is solved and guess what, it had nothing to do with my TP2. The problem was my carkit. It has a maximum number of bluetooth devices (5) it can pair to and the last one (the WM6.1 version of my phone) had been reached. So a hard reset on the bluetooth carkit and the problem was solved.
Well, at least I now know how to flash a rom to my phone and I think I learned more about the phone reading through all the forums. Thanks all for thinking with me on this problem!
Does anyone else still have this problem?? I have removed all the devices from my car and continue to have the same pairing error just after entering the passcode. Stock Spint ROM worked great, but multiple 6.5 upgrades don"t pair..............suggestions/ideas??????
bluetooth settings, advanced, enable beam data exchange,check the box
Interesting.....I actually found a fix. Instead of pairing the phone with the car, I paired the car with the phone. I didn't even know that this was possible, but it did the trick!

Problem with Windows Mobile and Bluetooth Headset Playing Audio

Hello guys,
I just got a Sony bluetooth headset and I am trying to use it with my HTC TYTN II. At first I paired the phone and the headset and I was able to listen to music and talk through the headset, all perfect. When I was listening to music, the bluetooth icon on my phone represented a music note and a headset over it.
When I turn the headset off once and then on again, it connects automatically with the phone but in some other mode. The bluetooth icon now represents the bluetooth sign with a headset over it. Now when I listen to some music, it comes from the speaker of the phone, not from the bluetooth headset. Talking through it is not a problem.
If I pair the phone and the headset again, it works just fine (showing again the music note) but once I turn the headset off and on again, I lose the music mode.
Does anyone know how to fix that? Thanks in advance.
I fixed the issue by installing AutoA2DP (found in this forum).
I've had a similar problem on my Tilt. I originally posted the following on the ROM thread. Since then, I have found that the AutoA2DP has not fixed the problem. I still have this issue about 70% of the time, and sometimes I can't get the bluetooth to work at all, not even after a soft reset. Sometimes it seems as if the bluetooth has no power, the phone can't communicate with the headset except when within a few inches of one another. Then it magically seems to resolve itself. Anyway here's my original post from the ROM thread.
The other day I installed an app on my phone called Schaps Network Plugin, which allows you to map network drives to the phone the same way you can do with a desktop. It allows me to access the home network directly via my wifi. It was something I needed and it seemed to work great, for a day. The next day my bluetooth headset would not connect. Long story only slightly shorter, it seems the problem was with the headset connecting via A2DP and doing so automatically. This always worked just fine in the past. Suddenly it wouldn't work. I tried a ton of things including a "fresh" install of everything and formatting my memory card to start with nothing on it. I flashed the original rom and then flashed this rom. I did hard resets each time. Did this twice. Even tried the bluetooth in the oem rom to see if I still got the problem. I did, and it is still with me. I can manually get the headset to connect via A2DP using the bluetooth settings, though even then it may take reconnecting several times to get it to work. However, when I turn the headset off and then on again, the A2DP does not reconnect, just the hands free. But the sound is not routed through the phone's speaker either, at that point. In fact you often get no sound at all, nothing via the headset or the speaker. OTOH, if you activate Voice Command, the headset does work while Voice command is running. After it shuts off, you are back to no sound. It seems as if the hands free works fine, but the audio gets partly routed to A2DP but does not connect to the headset. If I reset the phone, the headset connects correctly and efverything works until I turn the headset off again. Also if I pair the headset again, everything works correctly until I turn the headset off. Though pairing is not as trouble free as it used to be either. Sometimes it will not pair up wihtout repeated attempts. I did find this program, AutoA2DP which has patched the problem. It detects when a paired bluetooth device connects, and forces a connection via A2DP as well. But I never had this issue in the past, and my wife's phone still has no problem. I am not sure the Schaps Network plugin had anything to do with it, other than the timing. Seems odd to me that the bluetooth stack would suddenly develop issues that persist even after two fresh flashes of the rom. Any ideas, suggesitons, etc.? This is really bugging me, and although the patch seems to be working, the phone is still not acting "right." In the past, and on my wife's phone, if a bluetooth headset is turned on, it automatically connects, and all sounds, including the system sounds, are routed through the headset. Now, sometimes they are, and sometimes they aren't.

Categories

Resources