bluetooth problems - Touch CDMA Windows Mobile ROM Development

i updated my touch to 6.1 now it wont find my motorola S9 headset what do i do

my s9 works fine on my touch and titan wm 6.1....make sure when u first power on your s9 the blue light stays solid...this means its in pairing mode, then open up connections manager, click settings, bluetooth, find new device and it should find it in a few seconds

It should work just fine, upgrading to WM6.1 doesn't change the way your bluetooth functions.

i've had trouble pairing my bluetooth as well. instead of going to bluetooth explorer, go to settings > connections > bluetooth > add new device (even if its in the list still click this). after it finds the headset go through all the settings then when your done tap and hold where it says S9 (or whatever your headset is called) then choose set as wireless stereo, then it will say your device wants to connect. if it says the passcode is invalid try again and it should work. while this way of pairing my headset can take around 5 min. or more, its the only way it seems to be working.
i am not sure if your phone is showing the same symptoms as mine or not, but if this is a common problem then i hope someone smarter than me can fix it, becaue the way i have to set it up is a real pain.

Related

Need bluetooth help badly!~

Please help me out I'm incredibly frustrated with this thing. I recently got the PDA2k and installed WM05 on it. It looks very nice and it runs speedy with no problems. My problem is the bluetooth which is huge thing to me. Either my headset (Tekkeon Eztalker Mini) is not compatible which I doubt or I'm making a stupid mistake.
This is what I did step by step: I click on the bluetooth icon and turn on the bluetooth, I then put my headset in pairing mode and the imate is able to recognize it and I enter the Pw and I put Set as handsfree. That's it, I would think I would be done at this point yet nothing happens, the headset doesn't do anything and I know its not Tekkeons fault because I was able to hook it up easily with my HP 6315.
So what's going what am I missing?
Also theres a tab at the bottom called "Com Ports" but I only see under this option "Incoming Port", and the description at the top says there should be another option called "New outgoing port". Does this have anything to do with it?
What Am i doing wrong? It's driving me crazy I can't really use the phone without the headset.
help me out pls
Bluetooth
I know the feeling, i have gone back to 2003 cause of that but now i am back on wm5. The bluetooth issue is not fixed yet, it is not stable, it keeps going off. There is a suspend cab file, but it does not work for me yet, also try pokect zen beta. You might get a longer period of bluetooth
thanks for responding, but the problem is not that it suspends or stops working. It doesn't start working at all even though the imate detects it. It's like it's not connected at all, not that it disconnects. I'm doing something wrong I just don't know what.
The bluetooth piece is not faulty and the unit is practically brand new. whats going on?
I used "Display Switch" binded button (From Wisbar Advance 2) or "Toggle Screen" (From SPB Pocket Plus) to turn off the backlight instead of using power button .
This work around will keep bt connection alive.
Note:
1. If you suspend your BA using psShutXP your bt connection .
2. You have to disable auto turn off device under Start -> Setting -> Power
Note:
1. If you suspend your BA using psShutXP your bt connection will be disconnected.
I'm sorry I'm not sure I'm explaining myself correctly. I understand that if the power goes off I will lose the BT connection but the problem is not KEEPING the connection alive, the problem is MAKING the connection. I follow all the steps , the imate recognized the headset but I'm not able to use it..also shouldn't a headset picture show up at the top of the screen when the bt headset is connected (cuz mine doesnt). what am i doing wrong?
thanks.
still need help please.. if someone can walk me through how to setup a bluetooth connection that would be great cuz I apparently haven't done it right.
The headset icon only shows in Phone app
The headset icon only shows up in the Phone application. It no longer is displayed in the notification area (top row).
If your device is paired up, when you make a call, you will see the headset icon in the top right corner.
You may also need to clear any old pairings that you headset has. I have a Jabra 250 and it happens all the time.
there we go you have solved my problem!. I didnt' have to open up the phone application on my hp 6315 to use the bt. So wait can I listen to music with windows media player through the bt headset or does it only work when making phone calls? I was able to listen to music on the HP 6315, is it different with the Imate or is it the NEW 05 os? Please enlighten me
thank you thank you
also one other thing does this mean that if i want to use the headset with the phone that I have to press the answer button on the imate rather than the headset..cuz that would suck big time.
what about when people call me can i answer with the answer button of the bt headset or no?
It works fine with the headset button for answering or hanging up.
Later.......... 8)
droy001 said:
what about when people call me can i answer with the answer button of the bt headset or no?
Click to expand...
Click to collapse

Solved: Problem with Motorola S9 and HTC Touch Dual

Hello Everyone,
i am a proud owner of the S9 bluetooth headset and it worked very well at the beginning (1 day). Than i deletes 2 registry settings as mentioned in a forum somewhere (max bit pool stuff) to get better sound quality.
I dont know if it is the cause of the problem i got now but next day the S9 was gone in the bluetooth device list of my touch dual and cant be found anymore. the strange thing about it is that if i press the telephone button on the S9 the ms voice command icon appears and i can talk to it. also the touch dual seems to use the s9 as headset as the ring tone volume is switched to zero and the headset icon appears in the calling screen (after pressing the send button)
anyway i am not able to conect the s9 for music transfer and that is the problem if got..
any chance to delete the touch dual in the s9 settings so it allows a repairing? or somehow recovering the appearance of the s9 in the device list of the ppc?
any suggestions are welcome.. nice sunday everone
Edit:
Problem solved.. dont know how but the pocket pc found the headset finally again..
Glad that it works again for you.
I have a Blueangle with WM 6.1 and the S9.
Can you get yours to play music and have the display off (not dimmed but off). I have found a device lock that works fine while BT is off however when BT is on and connected to the S9 it always wakes up the screen.
What Version of WM are you running ??
Oops, sounds like my yet-to-be-solved case.
What I have: Qtek 9100 and Jabra BT250v. Some time ago I also deleted this partnership (don`t ask why) and when tried to re-establish it again, the device kept declining the connection with the headset. The device finds the headset, asks for a password and whatever combination of digits I enter it rejects to establish a new partnership.
I guess, the problem is in registry. Anyone could help with this one? What should I fix in a registry to re-pair the headset and device? Thanks in advance.
Ok in case anyone else got that problem i guess i know what it caused: i paired the bluetooth headset with my laptop after pairing it with the pocket pc. and although no service could be used (ms bluetooth stack) the S9 didnt use the PPC as standard music device but the laptop. after deleting the pairing from the laptop the S9 i could pair it to the ppc again.
about MDAIIIUser's problem: dont know any way of listening to music with the device turned off. i use AE Button to switch display off by double cklicking the green button or starting S2U2 by double clicking the red one. anyway, if display is switched off and i press a button on the bluetooth headset the display turns on again thats why i just lock the device and dont care if the display is on for some minutes in my pocket..

Surely an app exists that does this....

I am trying to find a bluetooth app that will allow me to set a "default / always connect automatically" bluetooth device.
I am looking for this functionality:
- When the phone detects my car's bluetooth is in range, and it's not connected to anything else, it'll connect.
- If I turn on another bluetooth device such as my headset, it'll automatically disconnect from my car and connect to my headset
- When I turn off my headset, it'll automatically reconnect back to my car.
Currently my phone will not do this. I must manually connect/disconnect everything. Any ideas?
Takes some getting used to, but you should try an app called 'Tasker' It's kind of expensive but if you go to the devs website I think you can use it for free for like a week or so to see how it works out for ya
tasker is expensive but worth more than every cent. you can pretty much set it up ot automate anything

JBL Reflect mini 2 not found

Hi, every one! I bought brand new JBL Bluetooth Headset, model name is JBL Reflect mini BT2, and when i turn bluetooth and headset on, there is nothing in the pairing menu. I had older BT-Headphones and everything worked fine. However, the JBL headphones connect to my Galaxy Tab A perfect. On my Mi5S runs LineageOS 16.0, latest update.
Greetings
You might have already tried this since you managed to pair the headphones to another phone, but maybe they don't want to pair to a new device unless the following is done:
To connect to a different Bluetooth device, first switch the headphones off.
Now press and hold the center button on the headphone remote control for about 3-5 seconds.
You should see the light blinking red/blue to indicate pairing mode, and the voice prompt should state “looking for device”.
You should see "Reflect Mini 2" appear on the source's BT list. Choose that option, and wait for the voice prompt to state “connected”
unicastbg said:
You might have already tried this since you managed to pair the headphones to another phone, but maybe they don't want to pair to a new device unless the following is done:
To connect to a different Bluetooth device, first switch the headphones off.
Now press and hold the center button on the headphone remote control for about 3-5 seconds.
You should see the light blinking red/blue to indicate pairing mode, and the voice prompt should state “looking for device”.
You should see "Reflect Mini 2" appear on the source's BT list. Choose that option, and wait for the voice prompt to state “connected”
Click to expand...
Click to collapse
I do this everytime and also did a hard reset on the headset and still not found.
I'm on LOS 16 too and don't have problems connecting to a headset or BT speaker. Here's one crazy idea Go to Developer settings (might need to enable them first - go to About phone, and click on build number at the very bottom until you get a note that you're a developer). Now go to System, Advanced, Developer options and under Networking hit Show Bluetooth devices without names. This will give you a list of BT MAC addresses. I'm curious if you see the JBL listed now. You can get its MAC address from the other phone.

bluetooth issues

I can see this discussion has come up many times before but never seem to have a fix, atleast i cant find one. my s20 ultra unlocked android 11 when i connect to my cars bluetooth radio works fine. but when i turn off the car and turn it back on it wont reconnect. i go into bluetooth settings and click connect but says im unable to. so i a, stuck having to unpair and factory resetting my car radio and having to re add my phone for it to work. i have tried factory resetting my phone. changing bluetooth avrcp version from 1.6 to 1.4. i also enabled "turn off A2DP hardware offload" as other forums have stated to try but none worked. anyone know a fix or if it also happens to them? so frustrating. thanks in advance.
Old school easy way...
If the car audio doesn't draw too much current at idle hot switch it and put a Battery Buddy on the battery to switch it off if it gets too low.
The problem is likely on the car side as Samsung bt devices seamlessly reconnects. No idea how though... fortunately I never had to hunt that down.
&
Make sure power management isn't active on the phone. It maybe auto enabled either globally or for bt. It maybe a Samsung bt settings issue; Samsung is notorious for hidden menus, sometimes completely unmarked... start tapping on things
Play with it... you'll sort it out.

Categories

Resources