I got this "ERROR 100: MODEL ID ERROR",... pl help
I try to upgrade XDA2 rom from "ruu172104wwe_t-mobile-uk" to "XDAII_172181_Final" and I got this error "ERROR 100: MODEL ID ERROR"
How can I slove this problem?
First I have O2 rom and I upgraded to "ruu172104wwe_t-mobile-uk", when I try to upgrade to "XDAII_172181_Final" everything look fine till the error occur I can open my O2 anymore on the screen show just message "serial v1.03"
Please help,.. Thank
i'm assuming you have a wallaby?
try reflashing using sd method.
dl nb1 file from kitchen
use xda-rools to write nb1 to sd
insert sd into wallaby
press pwr button and reset at same time
good luck!
Thank you for suggestion, but I'm very new for O2.. and I use XDA2
Could pl explain more,... how can i get nb1 (where is kitchen) and what's xda-rools? does it will work with XDA2?
sorry to ask boring question but i really dont know.
you are using O2 XDA2 ,right! do a "cleanjumper" , if you want update , under you use a t-mobile rom, the easy way!!
when i start the update with the qtek rom, my notebook says: " The Rom image that you are trying to use is not designed to work on your device. Please check the vender Web site and download the correct Rom update" can anybody help me??
all the time i became error 120 i used the method with MaUpgradeUt_noID.exe, but it not works, wat can i do?
Is that the Country ID error? The 120?
If it is, right after you get the error, run it again at once, it should go thru
I have a spanish vodafone v1640 and i want to change the ROM by using UNI_QTEK_13077_176_10900_WWE_Ship.exe
I have followed the steps from here http://forum.xda-developers.com/viewtopic.php?t=45874 but all I achieve is that error (120 incorrect country ID).
The Rom is in english but the phone is spanish, should that be a problem? I already made a backup.
i have also same problem
Rom is english
Update is Dutch (UNI_DT_WWE_13077_176_10900_Ship.exe)
what can i do ?
Follow this: http://forum.xda-developers.com/viewtopic.php?t=54071
hi quintus.. hmm maybe you can try to upgrade again when u get the error country id, sometimes you need to run 2 times of the upgrade so that i will be successful. just try out c if this works..
cheerss
Not sure if this applies but when doing the radio ROM upgrade I also got the country ID error. I just ran it immediately again without doing anything else. Worked fine. :lol:
Country ID Error Fixed
Hi guys this is my first post!!!
Country ID error....
i fixed my Vodafone V1640 today after a long and hard work
first download WM6.1 or 6.5 then get the original ROM for your
PPC in my was vf-uk_v1640_aku2_v130194_wwe_ship. extract
both to two separate folders (WIN RAR) copy the full content of
the subfolder “OutputFile” and paste in the WM6 folder, it will ask
if you will want to replace “nk.nbf” click yes. go to boot loader mode
and install…..
congratulations!!!
Hi,
My spv m500 (orange) is currently locked. How do I unlock it?
I've tried the universal unlocker from this site but it didn't work.
Maybe I need a magician to unlock the magician
Any suggestions please?
Kind Regards
this tool
rename from text to exe file. Copy to device and execute it
fromdesert said:
rename from text to exe file. Copy to device and execute it
Click to expand...
Click to collapse
thanx mate very good solution tested my self
REGARDS
GSM MIND
Thanks
fromdesert said:
rename from text to exe file. Copy to device and execute it
Click to expand...
Click to collapse
I've tried it. And it works! Thanks a lot!!!
Thnx Mate !
Thnx alot
I appreciate it !!!!!
WBR.,
ALi
unlock m500
Thanks for the great site - I have unlocked an M500 bu when I place my O2 sim into m500 it accepts the pin but then posts 'network is locked - enter unlock code' - despite using unlock program previously - any ideas?
simon
Hello, i´m trying this tool, bud i get this Invalid or missing SIM card
any clues, I´m from Bolivia, South America.
Thanks a lot
i cant get this thing to work :S
help? spv m500 with missing or invalid sim error (its on orange, and i want it on t-mobile, and had it working a while ago, and then suddenly it didnt)
thanks -- ben
fromdesert said:
rename from text to exe file. Copy to device and execute it
Click to expand...
Click to collapse
awesome man it works
thanx bro
Having lost my M3100................
the removing the sim card and restarting resolved the problem, kept trying like the other posts said.
fromdesert said:
rename from text to exe file. Copy to device and execute it
Click to expand...
Click to collapse
Thank you!
SPV Unlocking
hi guys, im a novice at this unlocking thing and i have followed the instructions to unlock th spv but trying to figure out where to put the unlock.exe file on the device to unlock it, pls help
I just got me a free M500 off a friend who no longer uses it so I am going to try this unlocker later today
I'll post back with what I did and if it worked or not
the tool at the start of this thread unlocked the SPV m500 in 1 minute
no problems at all
I placed a copy of the file in MY DOCUMENTS on the phone and used FILE EXPLORER to run it.
Now I need to work out why i can't see any of the contacts on the SIM card
Magician
I have a magician which was sim locked to T-Mobile.
Thanks to the tools offered, I was able to un-lock the phone and use it on O2 for 3 years.
I had a problem with the phone and had to re-install the ROM from the CD supplied by T-mobile. Upon doing so, the phone has locked itself to T-Mobile again and will not accept any other sim cards. I have tried O2, Vodafone and Orange.
The phone itself has now got Windows 6.1 by Cotulla, but as mentioned above, I can only use it on T-Mobile.
I have tried:
Lokiwiz (error message)
xdadev_all_unlock says the following:
xdadev_all_unlock started
device=HTC Magician
xdadev_all_unlock started
device=HTC Magician
xdadev_all_unlock started
device=HTC Magician
could not find security key for device type HTC Magician
xdadev_all_unlock failed
xdaSimlock
xda2unlock-v2.2 (says "found all locks to be already unlocked!"
The device still won't allow me to use any other sim cards. T-Mobile will supply a code for £29.00 but it's not guaranteed to work.
I will be very grateful to anyone out there that can help please??
Kind Regards,
Jp
i tried to upgrade to WM6 after installing hard SPL 1.20.
ive got the message:
error 294: invalid vender ID
what can be the problem?
you must use update no id and u can find here.
http://www.sendspace.com/file/878i9b
overwrite the .exe in your folder and try again.
i hope it's usefull. Robert