when i start the update with the qtek rom, my notebook says: " The Rom image that you are trying to use is not designed to work on your device. Please check the vender Web site and download the correct Rom update" can anybody help me??
all the time i became error 120 i used the method with MaUpgradeUt_noID.exe, but it not works, wat can i do?
Is that the Country ID error? The 120?
If it is, right after you get the error, run it again at once, it should go thru
Related
could you please help me? I downloaded xdaunlock from this site and
via activesync transfered the file to my xda, however when i try to open
the aplication i get an error message saying "error getting unlock code"
Am i doing anything wrong?[/b]
this tool doesn't work on some ROM versions especially if it's WM2003 ... and also won't work with RSU 6.2x from Tmobile
I got this "ERROR 100: MODEL ID ERROR",... pl help
I try to upgrade XDA2 rom from "ruu172104wwe_t-mobile-uk" to "XDAII_172181_Final" and I got this error "ERROR 100: MODEL ID ERROR"
How can I slove this problem?
First I have O2 rom and I upgraded to "ruu172104wwe_t-mobile-uk", when I try to upgrade to "XDAII_172181_Final" everything look fine till the error occur I can open my O2 anymore on the screen show just message "serial v1.03"
Please help,.. Thank
i'm assuming you have a wallaby?
try reflashing using sd method.
dl nb1 file from kitchen
use xda-rools to write nb1 to sd
insert sd into wallaby
press pwr button and reset at same time
good luck!
Thank you for suggestion, but I'm very new for O2.. and I use XDA2
Could pl explain more,... how can i get nb1 (where is kitchen) and what's xda-rools? does it will work with XDA2?
sorry to ask boring question but i really dont know.
you are using O2 XDA2 ,right! do a "cleanjumper" , if you want update , under you use a t-mobile rom, the easy way!!
dear freinds
I have been given a XDA2 that is dead ,but can enter only usb mode.
So i tried to download 02 UK FINAL 172181-final
but gave 'country error ' 0.0.111
so i downloaded himaupgreadeeut.exe
but when i try to upgrade it says
'
Error 103 rom image not found.
please can someone advise what to do or how to fix.
Thanks
Martin
OK i have manged to update this by putting the hacked version into same folder and have done a successfull rom upgrade and starts up as I MATE
But handset resets itself after 5 minutes.
i have again tried to update to the 02 UK FINAL and now it says
country error N -8-1-1-1
PLEASE help
use different upgrader
hi thee are two himaupgraders one is himaupgrateut and the other is himaupgradeut_noid this doesnt need country code etc
while trying to upgrade with UNI_TMUK_130114_130232_11003_WWE_BL101_Ship giving erro 113: also tryed with JASJAR_WWE_11353_137_10301 and also with UNI_CDL_001_13076_164_10900_A2DP_MSFP_WWE_FINAL
The error is same. What could be the problem?.Now it struct in the boot mode (serial on display)
Also found this instruction in another thread "Now connect woth USB cable and open mtty utility" what the mtty utility?
i had the same problem..
i also read somewhere on this forum
that i could be linked to the bootloader version..
I have 1.01 and it should be 0.64 or something or maybe 1.00.
i dont know for certain..
I almost ****ed my mda pro whith the official Tmobile update(NL)
crap i want to update my machine
but now iam afraid to break my new toy
i had the same problem.. but
Code:
SERIAL" version 1.2
and
Code:
ERROR 112: CE ROM UPDATE ERROR
please help
Hello,
if got the T-Mobile MDA III with WM6.0.
Now i want to update my ROM with WM 6.5, bit i only become the following error:
Your image has corrupted. please check your update utility.
Can anyone help me???
i hope you can help me.
thx
markus
try to re-download the rom and make sure you run a USPL first if it's your first upgrade. Search the forum if you need help
it dosn´t works
i´ve tried 5 different roms but no one works.
its the second upgrade on the fon.
Try a new update of SPL, files here= http://forum.xda-developers.com/showthread.php?t=311403
Download "ArtemisUSPL.zip"
1. Unzip
2. Connect your phone to computer, make sure activesync is enabled (green icon)
3. Run start_uspl.exe on your computer and wait until process finishes
4. The phone reboot.
When boot is done, you are CID unlock forever normally so you can flash all rom you want.
Then, You can flash now your rom, just run RUU from your rom folder and normally it's good.
If it always don't work, give us all the number show in your 1st screen when the phone boot (IPL, SPL ...)
yes, tell us what numbers you get on your screen
also what error are you getting
and what OS are you on....vista? XP ? Did you get an activesync connection before you tried flashing?
also try putting phone into bootloader mode first and then flashing, sometimes helps. (hold down RECORD/NOTES button when you reset)
once you've got an error number ( eg error 260 ) you can try searching the forum for that error number and see how everyone else has coped with it.