when i start the update with the qtek rom, my notebook says: " The Rom image that you are trying to use is not designed to work on your device. Please check the vender Web site and download the correct Rom update" can anybody help me??
all the time i became error 120 i used the method with MaUpgradeUt_noID.exe, but it not works, wat can i do?
Is that the Country ID error? The 120?
If it is, right after you get the error, run it again at once, it should go thru
I upgraded my 85' with the "official" wm6 rom and now I cannot go to other roms. The process was solid, meaning I was fully charged, no power loss, and it was synced. I've tried every version of rom available and get the same results. I went through the "brick" thread and I'm affraid I don't quite fit into any category. I can get phone calls and everything works, I just happen to like all of the great ROM's everybody is cooking and want to try them to see which one I favor. I tried using the Hard-SPL and all of the other bootloaders out there and I always get that ERROR [206]. I've tried to restart the machine, and hard reset the 85'. Any good idea's.... Maybe I need to search more? I'll try that.
==============================================================================
UPDATE:
What I should really do is rent a gun, and buy a bullet...
I'm not saying I'm some sort of season veteran of flashing... but I've never had to touch anything after I accept all terms. For some reason, when it came down to the last "Next" form, my phone flashes "Accept" super fast. So what to do?... I push "Yes" soft key fast as I can and it runs like grease lightening... I had to choose SS for the boot loader because it couldn't figure it out... Maybe next time around.
Have you tried to flash a coocked ROM using the microSD card?
Hi,
did you try get your phone in the tri color bootloader screen and then running the Hard SPL program again?
I did not try to do flash it woth the MicroSD card... I just found out that I could flash it with the MicroSD card about 2 seconds ago. And I wanted to Hard-SPL at the tri-color as a last result in fear of bricking but everything is okay now. As I said before, I've never had to touch my 85' while flashing the rom, it just did it on it's own, but that "official" rom was not about being neglected. And then when I saw it flash something and say "yes", I pushed it and never looked back. It's alllllllllllllllllll good.
I do have one question, is the SSPL preferred over the other choices? Or is there one that is recommended?
Hi joshkrajnak,
How did you solve this problem exactly cos I dont understand what your saying:
http://forum.xda-developers.com/showthread.php?t=298640
boz said:
I extracted these error codes from a Hermes rom upgrade 'read me' document, these should be of help if you get an error message during a rom upgrade. They should be common to all roms, please correct me if I am wrong.
ERROR [202, 204] : CONNECTION
This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
ERROR [206] : MEMORY ALLOCATION
ERROR [280] : UPDATE ERROR
When you see any of these error messages, close other running programs on the computer and run RUU again.
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
ERROR [212] : FILE CREATE
ERROR [214] : FILE WRITE
ERROR [222, 224] : DEVICE NOT RESPONDING
These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.
ERROR [220] : MAIN BATTERY POWER
This error message will appear when the device’s battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).
ERROR [238] : FILE READ
This error message may appear when, for some unknown reason, the ROM image on the Mobile Device is corrupt. Download the whole RUU and try again.
ERROR [240] : FILE OPEN
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.
ERROR [242] : INVALID LANGUAGE
ERROR [244] : INVALID MODEL ID
ERROR [294] : INVALID VENDER ID
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
ERROR [246] : DEVICE NOT RESPONDING
This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
ERROR [330] : ROM IMAGE ERROR
This error message will appear when you use the incorrect RUU to upgrade and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version to upgrade.
Click to expand...
Click to collapse
To Clarify: Whenever I went to upgrade my 85' to a different ROM, it wouldn't recognize my bootloader, and then after selecting any of the options, it would give the "ERROR [206]" message and fail miserably with any rom.
What I did to correct it was this: On the "official release" whenever I went to upgrade the ROM, the 85' would show a message at the bottom, the same as any "Notification" would giving me the option to either "confirm" or "dismiss". I did not notice the messages up until it caught my attention out of the corner of my eye on the very last attempt. The messages would quickly appear and disappear, so when the time came and it stated:
Current Rom: 3.25.###.###
Upgrade: 1.##.###
I had to press a confirm notification to continue on or I would get the "206" error message. The quote posted by Binyo is correct, but it does not apply in my situation.
ERROR [206] : MEMORY ALLOCATION
ERROR [280] : UPDATE ERROR
When you see any of these error messages, close other running programs on the computer and run RUU again.
Although that may be true that some applications may interfere with the upgrade process, I had turned off all applications and killed any services during this process.
while i upgrade to wm06 i get this error.
spl : 1.04
rom version :1.25...
please help me
I have got same inf when use RUU, but my spl is 1.01.
what shall we do
my
ipl :1.01
spl:1.04
radio :1.07
rom version : 1.25.207
now i cannot install wm06 tom my xda trion also htc hermes.
i dont know why i get this error. the usb is allways connected to laptop. and it is not deffect.
please help us friends.....
and i cannot succees bootloadermode by pressing power + ok and then stylus
why dont it go ?
and now it is ok. at the end i use wm06.
my steps was so.
if you start wm06 you get this message. go on insitalling on breck up.
ms corporation suggest to abort it.
you klick on "installirung fortsetzen" then you get an other error massege
error 264 when you get this error massage make a soft reset your hermes.
and i said before you are now on WM06.
Hi everybody;
I'm trying to update my HTC DIAMOND.Everything seems ok.Activesync detects my phone.
Image version 1.35.456.3 to i.93.479.3KRM
Then phone goes to BOOT mode;
SPL : 1.35.0000
Then i can see progress bar on phone LCD but it takes few moments and i get "UPDATE ERROR" and it takes me to RECOVERY page.
As mentioned in "READ ME" file:
This error occurs during the CE ROM code upgrade process.
I soft reset and restart RUU but the same thing happens.I changed USB cable and tried on another PC but the same
PLZ help.
I'm using activesync version 4.5
Install Hard SLP!
i had the same problem..
the solution for me was to upgrade the hard spl
so try to use the last version
CU
thanks,i'll try and post result.
Hi, Guys i´m now at end of knowledge and reading.
I Try to get Aztor V7 into my Device im reading hours trying an always the same. No Flashing
I Try to get Hard SPL 1.23/1.24/1.30/ Olinex Unsigned Signed onto my Device an get everytime the Same Message ERROR 244 Invalid Model id.
Reading the Thread about flashing problems with 0% 5% and Invalid Model.
I´m using the NBHUtil but with this tool i won´t get a Target CID.
One Time with an SPL my device hangs with a grey screen and a progress Bar at 0%.
Trying Unsigned Hard SPL The Device only reboots. And the Mesaage comes Invalid Model ID.
Now i´please need a little help from the Pro
Here are some Dates of my Device:
R 1.02.25.19
G 52.33.25.17U
D 3.07.00.00
The 3 Colour screen on top SPl 1.90.000
MicroRaph v13
Adding Rom Version from ROM Update Utility:
1.90.407.4
And in the DiamondCustomRUU the Number when the Error comes on the right Bottom is: N-RBRK5567-S-DJCP./01*