I got this "ERROR 100: MODEL ID ERROR",... pl help
I try to upgrade XDA2 rom from "ruu172104wwe_t-mobile-uk" to "XDAII_172181_Final" and I got this error "ERROR 100: MODEL ID ERROR"
How can I slove this problem?
First I have O2 rom and I upgraded to "ruu172104wwe_t-mobile-uk", when I try to upgrade to "XDAII_172181_Final" everything look fine till the error occur I can open my O2 anymore on the screen show just message "serial v1.03"
Please help,.. Thank
i'm assuming you have a wallaby?
try reflashing using sd method.
dl nb1 file from kitchen
use xda-rools to write nb1 to sd
insert sd into wallaby
press pwr button and reset at same time
good luck!
Thank you for suggestion, but I'm very new for O2.. and I use XDA2
Could pl explain more,... how can i get nb1 (where is kitchen) and what's xda-rools? does it will work with XDA2?
sorry to ask boring question but i really dont know.
you are using O2 XDA2 ,right! do a "cleanjumper" , if you want update , under you use a t-mobile rom, the easy way!!
Related
I did not get the upgrade out of the PDA first, it is in bootloader mode.
By mistake, I picked up a XDA II upgrade instead of PDA III and clicked the sucker, only to get bummed completely. I guess it "deleted" the orig OS, or parts of it.
The BA is from o2, but private buy, no support expected from them.
The BA was in German, there is no "ID" for o2 given in the ID table.
I even tried T-kom's blackberry upgrade (German) gives same error as the 3 WWE SHIPS I tried, 120 "Country ID error"
Anyway to get the needed ROM info with the bootloader only ?
I would not mind the BA_5.1.1700_build_14343_Upgrade Engrish...
Somebody please help bring my new thang into life again
Hi Man,
Do not worry...Just upgrade the ext rom part of any ROM u have and it will be live again...then u can re-upgrade it completely
One problem I recognize I have: how to get DevData...
Thanks for the assuring words. But I have no idea what you mean with :"upgrade the ext rom part of any ROM u have and it will be live again."
I Assume the ext rom is a nbf file ?
I tried several of the ROM linked from this site (without modifiying them) no succes.
The nice guide made, explains how to get devdata on the PDA when working, but how to get that when bootloader mode is only option ? Or is that necessary? Are there ROM's that works anyway ??
The guide says:
"Device data reads:
PH20B 0 B GER R T-MOB101 1.12.00 0 0 1.12.100 1.02.00 02.00"
I do not have any of this info on my PDA Can it be retreived from the PC ?? (with a program)
I might also explain why I wanted to upgrade the ROM and didnt realize how "complicated" it can be. When trying to install a new appl. (Copilot) with a SD-card, the BA gave:
"setup-Fehler
Die datei "\storagecard\\2577\tts.cab ist keine gultige datei fur windows CE setup"
So, I thought the ROM version was ****ty not even knowing CAB files!
Any hints & help much appreciated
Rgds
Okeh..
Learned alot during the day on this site, it RAWKS!
I found the BA_TMUK_14200_112_11300_Ship (ENG)
& the MDAIII_TMDE_14201_116_11300_Ship (GER)
Using the "MaUpgradeUt_noID" I managed to get the GER running
Dropped the RADIO ROM of the GER to the ENG version and tried runnin the MaUpgradeUt_noID from that ROM. It worked!
The "standard" windows theme is NOT in the ENG pack, but in the GER one.
I then try run these Copilot cab files, still no luck ?!?
Tried some other CAB files snagged from the FTP, they worked...
I both tried the SD card install (autorun the cab) and from the install CD (to PC & device) both gives same error ? A little suspicious that none of the 2 install options work. Perhaps copilot is NOT compatible...
dear freinds
I have been given a XDA2 that is dead ,but can enter only usb mode.
So i tried to download 02 UK FINAL 172181-final
but gave 'country error ' 0.0.111
so i downloaded himaupgreadeeut.exe
but when i try to upgrade it says
'
Error 103 rom image not found.
please can someone advise what to do or how to fix.
Thanks
Martin
OK i have manged to update this by putting the hacked version into same folder and have done a successfull rom upgrade and starts up as I MATE
But handset resets itself after 5 minutes.
i have again tried to update to the 02 UK FINAL and now it says
country error N -8-1-1-1
PLEASE help
use different upgrader
hi thee are two himaupgraders one is himaupgrateut and the other is himaupgradeut_noid this doesnt need country code etc
when i start the update with the qtek rom, my notebook says: " The Rom image that you are trying to use is not designed to work on your device. Please check the vender Web site and download the correct Rom update" can anybody help me??
all the time i became error 120 i used the method with MaUpgradeUt_noID.exe, but it not works, wat can i do?
Is that the Country ID error? The 120?
If it is, right after you get the error, run it again at once, it should go thru
I have a spanish vodafone v1640 and i want to change the ROM by using UNI_QTEK_13077_176_10900_WWE_Ship.exe
I have followed the steps from here http://forum.xda-developers.com/viewtopic.php?t=45874 but all I achieve is that error (120 incorrect country ID).
The Rom is in english but the phone is spanish, should that be a problem? I already made a backup.
i have also same problem
Rom is english
Update is Dutch (UNI_DT_WWE_13077_176_10900_Ship.exe)
what can i do ?
Follow this: http://forum.xda-developers.com/viewtopic.php?t=54071
hi quintus.. hmm maybe you can try to upgrade again when u get the error country id, sometimes you need to run 2 times of the upgrade so that i will be successful. just try out c if this works..
cheerss
Not sure if this applies but when doing the radio ROM upgrade I also got the country ID error. I just ran it immediately again without doing anything else. Worked fine. :lol:
Country ID Error Fixed
Hi guys this is my first post!!!
Country ID error....
i fixed my Vodafone V1640 today after a long and hard work
first download WM6.1 or 6.5 then get the original ROM for your
PPC in my was vf-uk_v1640_aku2_v130194_wwe_ship. extract
both to two separate folders (WIN RAR) copy the full content of
the subfolder “OutputFile” and paste in the WM6 folder, it will ask
if you will want to replace “nk.nbf” click yes. go to boot loader mode
and install…..
congratulations!!!
while i upgrade to wm06 i get this error.
spl : 1.04
rom version :1.25...
please help me
I have got same inf when use RUU, but my spl is 1.01.
what shall we do
my
ipl :1.01
spl:1.04
radio :1.07
rom version : 1.25.207
now i cannot install wm06 tom my xda trion also htc hermes.
i dont know why i get this error. the usb is allways connected to laptop. and it is not deffect.
please help us friends.....
and i cannot succees bootloadermode by pressing power + ok and then stylus
why dont it go ?
and now it is ok. at the end i use wm06.
my steps was so.
if you start wm06 you get this message. go on insitalling on breck up.
ms corporation suggest to abort it.
you klick on "installirung fortsetzen" then you get an other error massege
error 264 when you get this error massage make a soft reset your hermes.
and i said before you are now on WM06.