Hi,
I want to buy me a QTek 9090, but first I wanted to know if someone has experience on the Proximus-Network (Belgium).
Is it worth buying a Qtek 9090?
Sam
Hi !
I'm using QTEK 9090 (french) with proximus. I have no problem using the GSM network. I use no GPRS.
Regards,
Olivier
I'm using a Qtek 9090 since 4 weeks with Proximus as GSM and GPRS without problems.
Qtek 9090 is a great tool :lol:
Is there any update available for qtek 9090 and from where?
Hi all,
Thanks for your responses! I will order my QTek 9090 tomorrow! Any experience with Bluetooth GPS? I read about some problems with QTek 9090 and bluetooth...
Hope they will solve this soon!
I'm using the QTek 2020 for a year and that one is great, so I guess the 9090 is even better!
Sam
I tried the my father's bluetooth GPS (mine is serial, using old QTEK1010 cables), and it seems to work fine. My father had problem with his ipaq 2210 and the BT GPS, using tomtom on SD card : bluetooth connection was lost after a few mins. With maps on the CF card : OK.
Hope this help.
I'm using my 9090 now for a week on Proximus, not problems at all. It's a company SIM card so I don't have GPRS so I can't comment on that.
My biggest problem is WiFi access - sometimes it's working OK, other times not. Getting it setup for the office and home is proving to be difficult. To be honest the software is not so easy to use in this respect and I would also imagine they need a firmware upgrade soon...
Other than that it has been a very pleasant experience overall.
Today I'm going to www.padeg.com to buy a 1giga SD card :twisted:
Hi,
I got my QTek 9090 and these are my experiences:
- Great machine!
- Proximus works fine
- GPRS works fine
- Bluetooth GPS works fine
- Bluetooth ActiveSync works fine
(only this http://forum.xda-developers.com/viewtopic.php?t=13604)
It is a great machine!!!!
Sam
configuring qtek 9090 for GPRS with proximus
can anybody show me how to configure my qtek 9090 for having gprs with proximus?
In fact, i have configured it yet and can be logged to proximus but i cannot load any web page.
Thanks for answering me.
QTEK 9090 + proximus
Does anybody know how to configure the QTEK 9090 for proximus Mobile Internet ?
Go to www.smart-phones.be in the support area
Cheers
V.
Hi there,
I have an O2 XDAiis. I would like to put the sim card from this into my Nokia 6230i and use my XDAiis as a PDA connected to my mobile through bluetooth. I have a IPAQ and am able to connect it to to my Nokia 6230i through bluetooth dialup networking but I cannot seen to be able to do this on my XDA. The connectivity I would like is a dialup modem and GPRS… please help
Thanks
Fiona
PS I am using the latest rom and bluetooth drivers from O2
Hi,
Yeah, the bluetooth seems to be cripled to stop you connecting via another mobile phone and make you use the operator it's got a SIM card for.
I would love to do this to - my blue angel is now my 2nd phone/pda/satnav and GPRS is expensive - if I want to use cheaper GPRS in it i've got to swap the SIM card with my main phone
I've looked about quite a bit but can't find any kind of info or workaround.
Ian
BB Connect with TMO Dash - repost in the correct forum
Hi All,
I am trying to replace my company issued BB 7520 (Nextel) with a T-mobile Dash. (my personal cell)
-I have downloaded the BB Connect Cab file to the Dash and installed. Ver2.1.2.39
-I have downloaded the BB Connect for Windows Mobileto my desktop and synched the Dash ver 2.1.1.9.
- I synched my Dash, it recognized the new PIN and I created a new encryption key
- I have called Tmo and had them add the BB service to my account.
The Dash is connecting to the TMO BB Network. The identity, Status Services and IT Policy all look OK.
However, I cannot send or receive emails, and my calender is not synching. I have turned off Calender synch in Activesynch. I don't have Activesynch synching anything.
Am I missing something? When I run the BB Connect Desktop for Windows Mobile, I only get panel that looks like the redirector settings on the BB Desktop Manager.
Do I need to run the Desktop Manager when I run the BB Connect for WM?
Thanks in Advance
James
I haven't been able to get BB Connect on my Excaibur afterthe first restart of the device. It does work though if I deselect the radio button for wireless PIM. Anyone know why this (I think the BBconnect service is CICAL) is preventing BBConnect from working?
Help, I am lost now.. I had BB Connect work on my Dash, then I flashed the ROM. I have BB installed and I can receive all my emails no problem, but I can't create new or reply to emails the action is greyed out. Since this is the only way I can email I really need to get this working.
Please help!!
Thanks
I fixed it, I just had to send a service book to my phone and everything works now..
"Tmobile" Dash and BB Connect Problems Please help
I have bb connect (smartphone edition) on my dash with the blackberry plan on my account.
It works great alot better then the trigger system !
I have a issue with the internet not working properly it is really slow I have to suspend the bb connect to get it to work normal ( pain in the butt )
And also my mms messages come in as a text that directs me to a web link as instead of downloading the pictures
Any help I know a couple other people posted this issue but there was no fix
Please help Thanks
****UPDATE*****
Fixed the mms messages not coming in.
The problem was I selected the blackberry 8100 on my tmobile account so I can add the blackberry and set it up. Once I switched it to the dash. The picture messages come in just fine.
Any one out there that can help with the slow internet problem ?
Was the slow Internet problem ever figured out? I installed BB Connect 4.0 and im noticing the same problem too.
disable the bb connect when ur using the internet through status in the bb connect menu...and when u finished surfing just enable it again( disabling it is not closing it...its just suspends until ur ready to use again)
Blackberry Connect using BIS (not BES) on WM6, possible?
I am using a Rogers S621 Excalibur (Carrier, CID, & App unlocked).
On my phone I am running WM6 standard 5.2.1238 (Russian ROM)
On my computer I am running Vista.
I do have a BB Connect data plan on my account.
I have installed the BB Connect software seen here:
http://www.sems.org/entry.asp?ENTRY_ID=228
and here: http://www.sems.org/entry.asp?ENTRY_ID=225
If I try to run the Blackberry Connect Desktop for Windows Mobile it begins to start up and then says "The account is not provisioned properly on the server" and then shuts down. I don't think that is an issue as I believe the desktop client is only for BES.
On my phone when I try to select the BB Connect app and select Register now it says:
Blackberry: Not Connected
Blackberry: Network Available
Blackberry: Data Tunnel Available
Blackberry: Not connected
On the BIS (www.rogers.com/bis) when I select "Change Device" and then enter my PIN & IMEI (found on my phone by selecting Blackberry>Settings>Identity ) it says: "The information you have provided could not be verified. Please check your information and try again".
On my phone when I select Start>Blackberry>Settings>Email Settings it says "Email settings unavailable".
What have I done wrong, or what can I try?
bb connect dont work with wm6...i had it on wm5 but once i updated the rom to wm6 it stopped..happened to all of us.. some ppl got it to work by editing stuff ...but thats jsut too much to go through
My HTC S621 is running BBC for WM5 under WM6! It´s ok.
johnmud said:
My HTC S621 is running BBC for WM5 under WM6! It´s ok.
Click to expand...
Click to collapse
What carrier are you on? Rogers?
BES? or BIS?
does this means you are confirming that your S621 is indeed CID & APP unlocked ?? and this is a "software" issue ??
I was starting to get confused with other posts of yours going back & forth not knowing yes or no
http://forum.xda-developers.com/showthread.php?t=322486
&
http://forum.xda-developers.com/showthread.php?t=322486&page=3
UnicornKaz said:
does this means you are confirming that your S621 is indeed CID & APP unlocked ?? and this is a "software" issue ??
I was starting to get confused with other posts of yours going back & forth not knowing yes or no
http://forum.xda-developers.com/showthread.php?t=322486
&
http://forum.xda-developers.com/showthread.php?t=322486&page=3
Click to expand...
Click to collapse
What are you talking about? When was I "going back & forth"?
And why are you rolling your eyes at me?
And wasn't it a "software" issue the whole time? It certainly wasn't a hardware issue.
crazygman said:
I fixed it, I just had to send a service book to my phone and everything works now..
Click to expand...
Click to collapse
How did you know that the service book transfered to your handset? I did the same but there were no new service books.
BB Connect 4 and WM6
I've just installed BlackBerry Connect 4.0 on my T-Mobile Dash with WM6. It works like a charm...!!!.
Regards.
Pedro.
Hi, in order for the BB connect to work on the Dash you have to have the BB data plan through your carrier. After you install the cab, go to your website where you can manage your device, pick a blackberry as your current device and then you can send the service books. You can also call your company and ask them to send the, just tell em your using a pearl or something. ANy way after that make sure you update the pin and then your good to go. Oh by the way the current US smartphones cant multitask APN's so you will not be able to access the blackberry.net apn for mail and the wap apn for internet at the same time. In order to use the internet you must suspend the bb connect software. I have a .cab for for smartphones which works if you want one. It was designed for the dash, excalibur, etc. It works great.
cellfonejoe said:
Hi, in order for the BB connect to work on the Dash you have to have the BB data plan through your carrier. After you install the cab, go to your website where you can manage your device, pick a blackberry as your current device and then you can send the service books. You can also call your company and ask them to send the, just tell em your using a pearl or something. ANy way after that make sure you update the pin and then your good to go. Oh by the way the current US smartphones cant multitask APN's so you will not be able to access the blackberry.net apn for mail and the wap apn for internet at the same time. In order to use the internet you must suspend the bb connect software. I have a .cab for for smartphones which works if you want one. It was designed for the dash, excalibur, etc. It works great.
Click to expand...
Click to collapse
I am using 2.1.2.39 and I can get the software running, where I seem to have the problem is with the service books. TMO has another PIN and IMIE number and will not let me change it.
I can send a new service book but they are not showing up on the handset.
BB Connect 4.0 not working on WM6
Hi there,
I have my HTC S621 from Rogers with Blackberry plan and recently upgraded to WM6. When loaded with BBC 4.0. It will not connect (works well under WM5). I have seen some ppl say it works and some ppl say it does not work.
Not sure if there is a way to fix it ?
Here is the info of my HTC:
ROM: 1.27.405.1
WM6 CEOS: 5.2.1238 (build 17745.0.2.3)
radio : 4.1.13.44_02.94.90
Thx.
BB Connect question: Is it possible to change (or get a different) PIN?
Long story short, my BIS won't accept my PIN and tech support has no idea why, so changing my PIN or getting a new phone seem to be my only options.
I recently found your excellent forums - wow!
I have a Sony Ericsson K810i which is 3G and I use to check mail etc and sometimes access the internet. It's nice and fast etc (depending on the 3G coverage)
My Oragne SPV M2000 (Blue Angel of course) is not 3G and I was wondering if I could somehow connect it to the Sony phone to use the internet connection.
I don't want to put my sim card in my SPV!
I rang Orange who (no surprise) said it couldn't be done.
Any ideas would be very much appreciated!
Many thanks
Best wishes
Harry
Hello
I've got HP Ipaq 914 running WM 6.1. I read lot of articles here how to make rSAP protocol working on WM6.1. My intention is to use it with Passat premimum phone kit.
After installing several versions of BT_sap.cab I'm finaly able to see my device once I do device search from the car kid. Ufortunately I can't pair it with my phone. I see error message on my Ipaq saying that connection to SIM card failed, please try again when phone is ready.
does someone have an idea how to fix it ? is the SIM blocked somehow ?
thx.
same here, did you find a way out?
Thanks a lot
Oliver
Frankly, I gave up. I use HTC Diamond 2 now - and I'm relay satisfied! RSAP works well with my premium car set.