Related
Hi there,
Apologies for no-doubt coming across like a complete noob, but I am
A friend of mine recently let me borrow his Orange SPV M2000. He has burnt a different firmware image onto it - it says 'i-mate' when it boots rather than 'Orange' (the details are below).
Anyway, I am having trouble connecting the device to my Jabra 250v headset. I have tried all kinds of different connection settings but I get the same message:
Connecting...
(followed, about 20 seconds later, by)
Connection failed.
- Waiting for device
x Connection failed.
The device paired OK. Also, I have managed to successfully pair with a friend's phone and transfer files from his phone to my device.
This is driving me mad! Surely someone must be able to put me out of my misery?
Thanks,
Nik
--
Orange SPV M2000 (WM 2003 SE)
Operator Version : ??
ROM Version : 1.40.00 WWE
ROM Date : 03/10/04
Radio Version : 1.13.00
Protocol Version : 1337.42
ExtROM Version : 1.40.176 WWE
Under 'Bluetooth Settings: Advanced', every .exe and DLL is listed as v1.0.0.3900.
Hi,
I would have thought that at least one of the 40+ people who have read this post would have had *something* to say?
If there is a bluetooth FAQ or troubleshooting guide somewhere, please point me at it!
Cheers,
N
moralcrusader said:
Hi,
I would have thought that at least one of the 40+ people who have read this post would have had *something* to say?
If there is a bluetooth FAQ or troubleshooting guide somewhere, please point me at it!
Cheers,
N
Click to expand...
Click to collapse
Maybe i can help. I have had your same problem with my 250v (the same as yours) and my wm2003 rom.
The difference is that you say it DOES pair and when i tried (several times, with different wm2003 bt stacks) it did not even show me an available headset.
Other BT devices and the PDA in total, was working great, but... no working headset. I tried a different brand headset (can you still return yours?) and it worked. I got the S2 and G2 working, but i have had lots of probs with crackling noises on the line, so it was terrible to use (read useless, to my opinion).
On different forums the ericson HB... series is mentioned as working great, in combination with ppc2003, but i was too late on returning the device to the store and 1st kept the s2. Also you can READ and LOOK UP YOURSELF on different fora that the widcomm/broadcomm stack is not so good at all because even with a good headset, you get lots of cracks on the line when the headset and ppc are more then 1 mtr appart (or even less).
The S2 (very plastic and noisy) was working very bad for me and then my boss gave me a new jabra 250v. Unfortunately it didn't was discovered on my wm2003 pda.
Ok, so far my problem. The solution.
I have upgraded to wm2005 via helmi's 3.2 WM2005 ROM (on wiki). This has a sort of ms bt stack wich supports the jabra very well. Now i have no cracks, perfect sound on headset (hearing and speaking) and all other main programs still work (among gps).
So u choose, return headset and try a different one of flash to WM 2005. All other wm2003 options that are there (audio dll's other stacks, etc) i have already gave a try and do not work!
Sorry for the impatience. Looking at what I wrote, and how soon after my original post, all I can say in my defense is that I am having a tough week and lost the plot a bit
Sorry.
Thanks for the info. At least I know I am not the only one with problems! I am tempted to upgrade to WM5, mostly out of curiosity but also because it looks nicer (a poor reason to upgrade, perhaps?). Then again, I think I'll drop into my local Orange store tomorrow and try a couple of different headsets. I have had my old one for years now and had been using it with my Nokia. I am sure they won't notice that I am not using an Orange ROM
I'll let you know how I got on - probably one the weekend.
Cheers,
Nik
Hi, i've upgraded my Tytn succesfully to WM6 Black Edition, works like a charm, great performance (better then WM5) only one major problem is that i cannot activate Rsap with "sapsettings" that doesn't seem available. I've downloaded the "ActivateMSBluetoothSAPProfile.cab" from another ROM but that gives an error.
Is there a ROM that has "Sapsettings" in the programs? I'd install that one then.
Any help is appreciated. Thnx.
Hi, I've had the same problem after upgrading my Hermes 300 to 3DES.3
I was missing the SAP or rSAP, which I needed for my Passat.
I found an OEM package here: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal_WM6_Kitchen_Helmi
and downloaded the btsapprofile (direct link: ftp://xda:[email protected]/Uploads/Universal/helmi_c/Kitchen_OEM/btsapprofile.v1.45.rar)
Extract the content of this file to your PC. Copy SAPSettings.lnk to \Windows\Start Menu\Programs on your phone.
Copy SAPSettings.exe.0409.mui, sapsettings.htm, SAPSettings.exe, SALib.dll, BtSim.exe to \Windows on your phone.
Go to Programs on your phone - you should find a working link to SAP settings.
This did the trick for me.
Cheers - mgruett
You are my hero! Works 100%. Thank you!
While looking into this issue i found anothern, maybe easier solution together with my collegues (same problem here, for the VW Passat fleet)
Just open this file, unrar, copy .cab file on your Hermes, execute, softreset and off you go.
http://forum.xda-developers.com/attachment.php?attachmentid=29801&d=1155792304
tested it on 2 Hermes with WM6 and it works flawlessly.
rSAP with TyTN, s620 and Wizard
Hi,
when you're saying "100% working" and "works flawlessly" do you mean you have the Icon in your program folder or is it really working well with your car-kit ? Make phonecalls, Syncs phonebook etc. ???
I've a carkit from THB (bury) since ages in my car and upgraded the phone holders from old nokias up to the LT9100 with rSAP. As rSap pops up, I was 100% sure that this is the solution I'm looking for.
Since 6 months now, I try to get that damn thing working. It always fails with "Sim Card missing / not found". I could pair, it connects to the phone, disables the phone-module, but I couldn't dial a number, nor could I sync the phone book.
I tried it with Blueangel, Wizard, TyTN and my brandnew S620 without succes. I tried it with PPC 2003, WM5 and WM6 Roms, no chance. Of course, I followed the hints in the forum.
I sent the carkit to Bury to upgrade to the latest firmware and guess what ... nothing, always the same problem with Windows Devices, but my Nokia 9300 connects well in a second.
So, bottom line, I'm not sure if it is a Bury Problem with a bad rSAP support for WM or a WM Problem as my Nokia connects well.
Any thought or tipp is highly appreciated
Thanks
Chris
I just tried the download from WDawn (thanks incidentally) and aside from it resetting my background to the windows default, worked just fine. Enabled SAP, gave the phone a poke up the rear and tried it on a Nokia 616 car kit. This car kit uses SAP if available, otherwise falls back to HFP. It quite happily connected via SAP. Next text with be the Mercedes Bluetooth module, which would have to be the fussiest car unit I've ever come across and it only supports SAP (no HFP, HSP.. or other fall back).
The phone used is a DoPod 838 Pro running the newly released official WM6 ROM. I never had this success with the cooked LVSW ROMs that I used in the past.
Alex.
Progress but still troubled
WDawn said:
While looking into this issue i found anothern, maybe easier solution together with my collegues (same problem here, for the VW Passat fleet)
Just open this file, unrar, copy .cab file on your Hermes, execute, softreset and off you go.
forum.xda-developers.com/attachment.php?attachmentid=29801&d=155792304
tested it on 2 Hermes with WM6 and it works flawlessly.
Click to expand...
Click to collapse
Hello!
I have a HP Ipaq 914c and having troubles connecting with the VW Passat.
Here are the steps that I have made so far. Any help will be much appreciated.
1) Initialy on the VW menu searched for BT phones. Detected mine but whenever I selected it, returned back with the message: "Phone not compatible"
2) Dicovered here this tool BTSAP_Test, installed on the Ipaq and activated the "Remote SIM Access" checkbox button
3) VW now is able to pair with the phone (after inputing the 16 code number) but immediatly after pairing says that "Bluetooth is not activated on phone" ...
4) Looking on BT devices in IPAQ I can now see a device named "VW UHV PREM", but the only available service to use for this device is "Dialup Networking".
Am I missing something ? Thanks.
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene
renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene
Click to expand...
Click to collapse
Same problem here... when upgrade to WM6 official the sound in the car is gone when dailing. Phone is connected but I'am unable to hear anything... everything goes into mute...
I'm stuck with the very same problem. I'll try JetWare and change some configs, but I fear it will not work.
If I have any news I'll post them.
Regards
P.D My car is a Citroen C4, and original Citroen bluetooth I think is a Parrot 3000 or 3100
I have the same problem.
Car kit BT Peugeot 207 and HTC 3300 with cooked room wm6.
I've installed jetware extension. I can hear sound in the first call but when I hang up the next call, the same problem .. no soud.
renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
e problem.
Please help.
Rene
Click to expand...
Click to collapse
Has anyone found a solution for this? I have found deactivating the bluetooth and reactivating on the call works.
I would hope someone finds a solution. What would be the downside of going back to WM5?? I cannot remember why I upgraded now.....
I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards
Alvinillo said:
I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards
Click to expand...
Click to collapse
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5
azreal1983 said:
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5
Click to expand...
Click to collapse
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards
Alvinillo said:
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards
Click to expand...
Click to collapse
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?
azreal1983 said:
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?
Click to expand...
Click to collapse
Nice!
But I find a problem, isn't your O2-XDA also known as Wallaby? I mean, if I'm right you are posting in the wrong forum or at least you should be advised not to install another PDA ROM on yours becouse you risk to brick it. We are posting at Artemis forum. Of course, Bluetooth problem seems not related to PDAs but WM6
On this forum there is info about how to unlock your PDA. Unfortunately I dont find any ROM for your device.
Regards
Same Problem
hi all,
207 FACTORY KIT / M650
I have the same problem, only the original ROM under WM5 work properly...
I Tried many bluetooth soft on several tips and WM6 release...
AJE , 1.5 / 6 /8 / 9 / 2.0 beta........
Now i am under B&B 5 (WM6.1) and the problem persist
I note that if i desactivate bluetooth stereo and fix sample rate to 44Khz, it looks to work a little better than before.
If i wait between 2 phone call (out), it works much.
If i answer to a phone call with the remote control it never works.
If i answer with green touch on the phone it work ALL the time.
Are we condamned to stay under WM5 !??
WM5 -> bluetooth but no CRM (does'n't want to work)
WM6 -> No bluetooth but CRM...
I choose to work on this but any result, since more than eight month...
HEEEEEEEEEEELLLP US AND SHAME ON PA**OT
PS: HTC and parrot pass a deal to increase compatibility of their product...
Since this time does anybody tel to parrot on this problem ?
Does newer HTC product originaly under WM6 work fine one factory kit (peugeot/citröen 207/C3...) because if no, i think parrot sucks ! they update firmware on all their product, but for product sells to peugeot or citroen -> NOTHING
Thx for the info. It's a pity that the problem persist on WM6.1
We are hooked to WM5 and to my eyes, the Artemis and PocketPCs look older than ever.
At the end, I think it is a Microsoft problem. PSA Bluetooth CarKit works flawlessly with WM5 so Microsoft changed something to the Bluetooth stack on WM6. Shame on them.
I'll wait to WM7, but I don't have too much expectations.
Regards
Some hotfixes are available from HTC regarding bluetooh, only not for the Hermes. damm.
Anyone tried one of these already? Currently still not able to updrade to WM6.1
http://forum.xda-developers.com/showthread.php?t=385128
And one recently for the Diamond..:
6/16/2008
Hot fix for resolving Bluetooth headset sound problem that occurs when reconnecting with HTC Touch Cruise
If you are using the Bluetooth headset, “Jabra JX10”, “Jabra BT500” or “Samsung WEP 150”, and the headset becomes out of range or undetected by the HTC Touch Cruise, in certain circumstances, you may be unable to hear any sound from the headset even after it has reconnected successfully with HTC Touch Cruise. Please install this hot fix to improve the connection when using the above-mentioned Bluetooth headsets.
Hi, I have:
- TYTN with WM6 (latest version from Schap)
- VW Touareg with Premium Bluetooth kit (2007 touch-screen model)
The phone is recognised (the name), it seems to pair ok (had to put in a 16-digit PIN), but then the car kit cannot connect to the phone for some reason.
I'm not sure why, but what I do know is that SAP has worked with a Nokia phone (dealer tested it with me). There, it downloaded its address book. It doesn't do that with my TYTN. I have double-checked all my settings on my phone, it has SAP and bluetooth enabled
So, has anybody managed to see their SAP in action on the WM6 enabled TYTN, and if so did it work "straight out of the box" or did you do something magical that you're willing to share!!!
If it's not working I'll just buy a £40 unlocked Nokia with SAP support and use that, but preferably I'd like to use my own phone.
Thanks for your help!
- Install the BT SAP cab you find here
http://forum.xda-developers.com/showthread.php?t=319468
- Enable Remote Sim Access
- Softreset
and it should be working. (does only synchronise the contacts on your SIM though, not the contacts in your phonememory)
Working here perfectly with VW Passat '07 with Premium Bluetooth Handsfree (ROM: Hypercore Lite SE). If you have any questions you can pm me.
WDawn said:
- Install the BT SAP cab you find here
http://forum.xda-developers.com/showthread.php?t=319468
- Enable Remote Sim Access
- Softreset
and it should be working. (does only synchronise the contacts on your SIM though, not the contacts in your phonememory)
Working here perfectly with VW Passat '07 with Premium Bluetooth Handsfree (ROM: Hypercore Lite SE). If you have any questions you can pm me.
Click to expand...
Click to collapse
Thanks WDawn,
Well it's promising you got it to work!! (yay!)
But I had spotted your post on the forum, downloaded the file, but the phone refuses to install it. I tried it on the older Schaps version, and I've even updated to the latest Schaps version. Both fail.
This is what happens: when I install in the Main Memory it says I do not have the required permissions, and when I install in the Extended Memory it says that it cannot install. When I tried installing it on the MiniSD card it produces the same as the memory message. I copy and pasted the file from my computer onto my phone, and tried installing it from the MiniSD card. I did not try to install it from the phone's memory itself I am just thinking.
Any idea???
Thanks!! (also thanks for confirming it's only SIM address book, forgot about that one )
To solve the issue of the permissions your should try this
http://forum.xda-developers.com/showthread.php?t=340716&highlight=application+unlock
If it's not working, reflash with Hypercore Lite SE. It's the best ROM out there.
Get it here : http://forum.xda-developers.com/showthread.php?t=339529
You won't regret the (expensive) Premium Bluetooth Handsfree from VW. Never had such a good handsfree kit. Perfect sound quality!
WDawn said:
To solve the issue of the permissions your should try this
http://forum.xda-developers.com/showthread.php?t=340716&highlight=application+unlock
If it's not working, reflash with Hypercore Lite SE. It's the best ROM out there.
Get it here : http://forum.xda-developers.com/showthread.php?t=339529
You won't regret the (expensive) Premium Bluetooth Handsfree from VW. Never had such a good handsfree kit. Perfect sound quality!
Click to expand...
Click to collapse
I've heard the handsfree kit yes and it's fantastic, I agree!
Unfortunately, the file still refuses to install . Everything else works. I can install other things without a problem. I've unlocked the phone, checked registry settings (the policies one) and ran various unlockers. That seemed to do something (different security message, or sometimes none) but this particular cab file simply refuses to install.
So I'm afraid and you're right, I'll have to change to the Hypercore ROM... Shame because I liked the way Schap's ROM looks but I will try this because if it's just for looks I might be able to survive with another template
If in the meantime you or anyone else has any brilliant ideas let me know. Otherwise I'll revert this weekend - to let you know whether it succeeded or not (useful for others too on the forum perhaps!).
WDawn said:
To solve the issue of the permissions your should try this
http://forum.xda-developers.com/showthread.php?t=340716&highlight=application+unlock
If it's not working, reflash with Hypercore Lite SE. It's the best ROM out there.
Get it here : http://forum.xda-developers.com/showthread.php?t=339529
You won't regret the (expensive) Premium Bluetooth Handsfree from VW. Never had such a good handsfree kit. Perfect sound quality!
Click to expand...
Click to collapse
OK, I've reflashed my phone with Hypercore Lite SE and installed the BT_Test.cab file (which installed successfully) but it's still not working!!
Mind you, my girlfriend and I have the same phone (so 2x TYTN); I flashed hers twice (two diff ROMs), and I flashed mine twice. They are both "found" by both ROMs by the car kit, but once you've inserted that 16-digit security code the carkit gives it is paired but the carkit says it cannot establish a connection.
With both phones!!!!
I know the kit works as it paired with a simple Nokia effortlessly. That's probably because Nokia supplies the technology to VW.
So, unless someone has got a really smart idea, it looks like I'll have to buy a cheap unlocked Nokia 6230 from ebay...
I just find it really annoying you managed to get it to work (good for you ) but that the result is different for me! that's bizarre.
Anyone!??!?!?
Have you tested it with an official release of WM6 from HTC just to see if an unmodified version will work?
Scrambler001 said:
Have you tested it with an official release of WM6 from HTC just to see if an unmodified version will work?
Click to expand...
Click to collapse
It's a good point - not yet!
Where can I download this from other than from HTC directly?? I have a T-Mobile Vario II and this does not come with an HTC membership (I've already tried via HTC's website)... Bit stupid really as it's the same device but there you go. T-mobile has no update unfortunately.
Cheers
Ah, I found a working link via the main page...
I'll post back to confirm the result - thanks!
Hope it works for you. If it does then you know it's probably some settings someplace that need tweaking or it could be a prog thats in the cooked ROM that just does not agree with your system configuration.
It didn't work.
After all that hassle of downgrading rom, SuperCIDing etc...
It doesn't work with the original HTC WM6 ROM arghhhhhhhhhhh
Always accepts the 16-digit code but then the "handshaking" stops; it pairs but the carkit "cannot establish a connection". As if it's incompatible, but then some other people managed to get it to work.
It's unbelievable.
Really bizarre
I'm [this] close to buying a Nokia 6230. Grrr.
You can alway put it back to WM5 if it's that important but I know you don't really want to do that. It was a good try though.
I have had the TP2 for a couple of weeks now and am generally very happy with it, but for some reason the Sim Access Profile is not working correctly with my Audi. I have paired the phone with the car and have enabled SAP in the phone's BT advanced settings page. Unfortunately the car will only access part of my phone book (only contacts under A to B are showing). The phone has all of my contacts on it and all of the other features of SAP seem to be working. I know that I can use JETware as an alternative but would like to know if I am doing something stupid with the phone before I go down the JETware route.
Any help would be appreciated, thanks.
I put my problem / question in this thread:
I use the TP2 in my skoda with a audi BT-SAP-Adapter this combination works, tested it before with my S/// X1.
When i pair my phone with the sap-Adapter the adapter recognizes that the TP2 can use the SAP-BT-profile and use the longer pairing PIN (when you pair a mobilephone wich has no SAP-profile the adapter use the Handsfree-profile and shows you a shorter PIN). As far, everything seems to work great.
But when my TP2 want´s than to connect with the adapter i see that the statusline shows the typical symbol for the flight mode and in the BT-menu at the BT-adapter i see the words "SIM-Access" for very short time (~ one second). Next the line “Stereo-profile” or something else (it is to fast to read) appears and half a second later the line “Handfsree” appears. The Symbol for a handsfree connection is shown at the statusline and the sign for flightmode changes back to the normal symbol for filedstrength.
what i tried as far to solve the problem:
1) i contacted the HTC-Support. They told me. that they made, at the moment, a test-row to solve specially the problems between HTC-WINMob-Handsets and car-handsfree-sets. So i got from there a software which i had to install at my phone and got a error-report. This i had to sent to HTC. No further comment from them.
2) i searched at very much forums at the car and mobilephone scene.
3) I tested the combination with different SIM-cards from different Providers and different ages.
4) I deleted my contacts at my SIM and wrote some newer one with an NOKIA Phone (this helped by some other SAP-car-FSEs)
5) I used No-Data
6) I installed the newest radio-rom.
Nothing of this brought some solution.
As i found at my recherches i´m not the only one who hast this problem with the HTC and sap-car-handsfree-set.
I thing, that this is a problem with the BT-Stack which is used at the TP2 and other HTC, is it?
Dose somebody solved this problem? Even with an other HTC with the same BT-Stack???
Has somebody any other idea to solve the problem??
Any help??
Merci
Quino666
I had no problems with SIM access on my 2010 A3 TDI -- worked flawlessly with my Tilt 2 with stock ROM. I haven't checked the car's phonebook lately, but last time I looked, everything was there.
1) With update on WM 6.5 or the first WM 6-version of the ROM?
2) Do you use a build in Handsfree solution with sap-profile or the adapter-solution?
Merci
Quino666
Hey,
I have a similiar Problem with the rSAP snap-in Adapter in my 2010 iDrive BMW. rSAP (telephony) just works great, but it only syncs the simcard's PhoneBook entries.
The BT-Monitor on my TP2 (Energy Rom WiMo 6.5.6) shows an active SAP and PBAP connection. Any ideas how I tell my TP2 to distribute the internal Exchange contacts and not the SIM-Contacts?
bye
Darky