white screen - MDA III, XDA III, PDA2k, 9090 General

I have a strange problem with the screen of my qtek 9090.
It is very white and barely readable.
Here are some picture I took: (It's the original theme wich should look blue)
http://aycu13.webshots.com/image/1772/1572352186794995082_rs.jpg
http://aycu03.webshots.com/image/522/1144911258513276775_rs.jpg
http://aycu19.webshots.com/image/178/1892814974279885512_rs.jpg
Does domebody have a solution for this?
Or is my screen completely broken and should I get a new screen? :?
Jeff

IMHO you need go get you BA to the nearest service point

Its a bit like the problem I had with mine. Does it change if you open/close the keyboard?
As the above poster says get it to a service centre if it is within warranty.

Ohboy, i got it 2!!!!
Device also out of warranty. Any help or new insights on this?
What is broken en what are the costs? Is it the screen or the GPU?

Mine does something similar on occasion, the screen goes totally white with some random colours in it. Usually resetting or suspending it clears it up after it comes back up.
I'm guessing you have tried resetting/suspending it?

jdc said:
Mine does something similar on occasion, the screen goes totally white with some random colours in it. Usually resetting or suspending it clears it up after it comes back up.
I'm guessing you have tried resetting/suspending it?
Click to expand...
Click to collapse
Thanks for your reply!
Yes, but no difference, Tried SR and HR, but still same screens...
The good news is that I now have bought a p3300! Nevertheless i would like to have my 9090 working 2!

Kick!
Anyone?

Related

Can't align screen? Suggestions?

I just bought a blue angel (Mda iii) off ebay.
The unit seemed ok, but after an hour of setup the screen alignment was off. Re-aligned, an went on.
Now, the unit can't be aligned. Have hard reset and it just continues to run through the alignment pattern.
I've not dropped it, or any of that type of stuff. Any Ideas? Sounds like I got a bad deal from the seller.
Thanks,
Steven Foster
Hey Steve!!!
When u hard reset it, does it not get past the screen alignment, or does it??? Because once your device is on, you can try align it through the settings menu... start>setting>system>screen>align screen... But if it does not get past alignment at start, then i think you have a bit of a problem...
stevef5710649 said:
I just bought a blue angel (Mda iii) off ebay.
The unit seemed ok, but after an hour of setup the screen alignment was off. Re-aligned, an went on.
Now, the unit can't be aligned. Have hard reset and it just continues to run through the alignment pattern.
I've not dropped it, or any of that type of stuff. Any Ideas? Sounds like I got a bad deal from the seller.
Thanks,
Steven Foster
Click to expand...
Click to collapse
get a rom from the FTP and flash it with a new rom, maybe it is software related, if this does not work then it may be the sensors on the screen, that take part in the alignment of the screen.... maybe it was dropped previously and thats why it was sold on ebay, how much did you pay for it???
I had the same problem on my second MDA3. I changed the first, than I changed the second one to a third all with warranty. I think it is a hardware bug! no change of the firmware is solving the problem, I tested that so much.
Steve,
best bet is to bring your device to the nearest service point. I've had the same experience with my xdaIIs, and ended up returning 5 of them for the screen problem. The dealer explained it was faulty screen from manufacturers, and they found 1 batch of shipment (10 units) with the same problem.. Good luck :wink:
My and my other 2 mates bougt XdaIIs's. And my Xda and 1 of my friend's experience the problem. Well... that makes it 2 out of 3 XdaIIs's with screen alignment problem.
Fortunately when we brought our Xda's to the service centre down here, they said, this is a known problem with XdaIIs. They've been getting many complaints the same as ours.
But, no worries whatsoever. They quickly replace the whole screen. And it took only 3 working days.
Now that's what i call customer service!

TyTN Bricked.....White Screen

Before I start getting flamed.....I have been researching the methods to solve this bricking for the last 3 days and NOTHING has worked.
I have tried HARD resetting (2 soft keys and reset) tried flashing with bootloader version 1.04....NOTHING.
I cannot understand what to do next. Nothing is working, the WMBLACK screen is coming up and then the white screen!!!!
I have followed several instructions and I must be doing something wrong!!!
Is there anything else I can try?
Thanks
NJV
Have you gone here
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Yes....this is the first place I looked....I have followed everything....still nothing.
Hmmm... doesn't sound to me like a brick in the true sense. Do you have Hard-SPL installed? If so I'd check for bad blocks. If not, I'd flash Hard-SPL, then check.
See bootloader section of the Wiki and the Hard-SPL thread (mtty, 'info 8' and 'task 2a' in particular).
EDIT: Oh yeah, I think a bad battery can cause weird behavior like that, too. Gotta spare you can try?
I've tried loading hard SPL and it keeps telling me it can't communicate with the unit.
I will go back and try what you have mentioned again.
I unfortunately don't have another battery.
Thanks I will report back....your help is appreciated.
You have to 'force SSPL' on the Hard-SPL install...
Hey mate, remi from australia here. I have a Dopod 838 pro which is the same as your device and I had the same problem a couple of months ago when Black released version 3.5 of WM6. I searched long and hard on the internet for solutions to this problem, some ppl thought it was a heat related issue which I thought could be correct because when I had the problem, if I left the device off for a couple of hours then turned it on again and did a hard reset it would work for about 10 mins... however yea 10 mins and the same issue again, other people thought it was a short circuit in the device and others managed to get rid of the white screen by applying presure to the chassis above the right soft key, above the "ok" button..... but none of these worked for me, when I was getting the problem the keys would malfunction and stop worling then the screen would go white and it would be stuffed again. after a while it was permanent and no hard resets helped anymore. I went to my dealer and they organised a new handset to be sent out to me within a couple of days. when it arrived I compared mine to the new one and one thing I noticed was that the LCD on my bricked device was a very clear white constantly, when it was off, like it had burnt out completely and the new dopod had a dark black LCD with no visible boarders, clearly showing the lcd was stuffed. so if the bricked device has a screen which has a clear white boarder on the lcd like a white picture in a blck frame its really stuffed. but yea the only way u can fix it is by sending it off to your dealer for repair or try and get a replacement out of them!
regards
remi
I had the same issue. Turned out the video chip had come loose from the board and a couple of necessary connections weren't happening. I had to send mine in for repair.
I was out of warranty and sent mine to PPCtechs. They sent it back as good as new with a shiny screen protector.

please help. white screen problem!

hey all i am currently having a problem with me htc s621.
when my phone is on it randomly turns to a white screen after a 2 day period or so. and after a while of turning off phone/taking out battery/taking out sim card and doing this a lot it goes back to normal. im getting pretty mad and was wondering if i need to get my phone replaced or what.
any advice is helpfull. and the phone is not updated to 6.1 or anything like that. btw it all started to happen after i dropped my phone one time. i am not sure if that helps or not.
thanks in advance
laserjetx
The phone may be damaged. Is it a stock phone or has it be flashed with a rom?
it is purely stock no upgrades at all. today it did something new, it was white then 20 min later wen back to normal without me turning it off or anything. should i bring it in into warintee or anything i can do to help it?
I have seen simular situations before. It is possible that when you dropped it, the ribbon cable connecting the LCD to the board became dislodged and is only making a partial connection. Or the LCD is just plain broken and needs to be replaced. You can get a new LCD on ebay for around $30 USD and do it yourself or take it to a repair shop and have then look at it for you.
i believe i will take it into the store tommorow. get a professional statement and opinion to see what i should do. thanks alot guys
White Screen, A Backlight Problem
laserjetx said:
i believe i will take it into the store tommorow. get a professional statement and opinion to see what i should do. thanks alot guys
Click to expand...
Click to collapse
I recall reading some time back concering the cause of the white screen had something to do with the backlight time, try making some adjustments with the backlight. Also do a serious search for that old thread dealing with this problem..............!
You would probably need a new screen and the best option would be to replace it yourself because you could find a cheap one off ebay and then just youtube and you could find on how to install the new screen.

Serious problem with my Galaxy S Screen!!!

Hi to all,
A couple of days ago I noticed that when I answered a call the colors of the screen looked bad, and I didn't pay attention to it.
Now my screen has transparent horizontal lines which are pretty visible, kind of like interference you get in computer screens when you take a picture of them.
I would like to mention that I haven't dropped the phone even once.
I'm considering doing a factory resest in hopes that it will solve the problem, but I doubt that it is a software issue.
What do you guys think?
Please advise
Itay
Sounds like a broken screen to me. And definitely like a warrenty case. Restore stock f/w if you have flashed and return it.
Restore the original firmware (if you have flashed the phone) and call the samsung service for the assistance.
the thing is that now I don't see it at all.
It's as if it came and gone.
I disabled my task killer and juice defender, performed a complete titanium backup, in case I want to restore afterwards, and now everything is normal.
It does sound like a hardware issue, but do you think there's a chance it is software related?
I'm asking because I purchased it in europe, and I don't live there, so sending it for repair is something I would rather avoid.
Of course, if it is indeed 100% hardare issue, I have no choice.
That is why I'm asking, to be certain and to see if there are others who experienced this issue.
Your replies are much appreciated
update:
It appeared again -> Did a Factory Reset -> It's still there -> Sending for repair.
Must be a hardware issue.
Thank you for your replies.
I've actually always had slight screen issues with my Galaxy S also. The screen flickers slightly once in a while. I don't know if the radio is actually the cause but it's the kind of thing you might expect from radio interference.
Has anybody else noticed this?
Benjamin Dobell said:
Has anybody else noticed this?
Click to expand...
Click to collapse
Nope, never seen any flicker. My screen seems to have a defect of it's own though, but I'm not sure if it's worth the effort to send it in, because I imported mine from the UK while I live in South Africa.
When in the sun or under bright light I can see a two vertical lines near the sides and a horizontal line on dark/black colours and when the screen is off. As if those pixels have a grey/brown tint to them. The line is mostly one pixel thick but in places it is two pixels.
They are almost impossible to see unless under sunlight where they are clearly visible where the screen is black.
Does anyone else see this or know anything about it?
Edit: Apparently it's just the motherboard or something visible through the screen and they all have it, so I'm worrying about nothing...
That's interesting...
It used to come and go, but I think now it's here to stay.
It's really annoying and the screen, while usable, is really not a pleasant sight to look at.
I've attached some photos showing the problem.
With a normal screen I would say that it looks that way because that's what you see when you photograph a screen of an electronic device, but the sad thing is that what you see in the picture is exactly what I'm seeing now.
I did a factory reset, so it's in german now.
I heard some Droid X had a similar problem, but didn't know Galaxy S was having it as well.
In any event, can you confirm that after a factory reset, I no longer have root access?
Just making sure so that they don't give me problems with the warranty.
seem like the phone was dropped, and the screen got damaged
the connectors are lose
double posted again....
Really?
That's very weird...
The only time it was "dropped" was from half a meter , it didn't fall directly but partially sideways, it was with a case, and it landed on its back, not on the screen.
I wouldn't even call that a fall.
Unless, someone in my family dropped it without telling me...
Either way, I think there's no escape but to send it to repair.
If you think it's a problem with the connectors, would you try and give it to some local lab to try and fix it or send it to samsung for replacement?
I faced similar problem.
This problem only occurs when I use the phone in 2g mode.
there are occasions whereby the signal bar for 2g is full and when I place the phone near some conductive surfaces the lines becomes very obvious, to the point of irritating.
nit sure if anyone has such problems too
I have same problems with horizontal lines.
I never paid attention if i am on 2g or 3g when it happens. I will now.
Edit: rooted on jm5
-------------
It seems that my phone too has started to do the same thing since last night.
I have called Samsung and am waiting to hear from them now.
I hope this is a thing covered in the warranty.
I have reverted to the local ROM for India and have deleted everything on my device.
Yet it shows lines flickering like you can see on old computer monitors.
Its not as bad as the ones on the attachment above but it is starting to annoy me.
It usually happens when the screen is completely filled with a single color except black.
Eg. When you pull down the notification tray down.
Also I seem to notice that when the wifi is off, it stops.(I dunno maybe a placebo effect)
aditya_t90 ,
I have sent it to Samsung for repair, and they should tell me in the coming days exactly what the problem is and whether it can be fixed under warranty or not.
I will update as soon as I hear from them.
Until then, try to see if it changes when you hold the phone differently, for example if you grip it more firmly or hold it in another way.
itaykoren said:
aditya_t90 ,
I have sent it to Samsung for repair, and they should tell me in the coming days exactly what the problem is and whether it can be fixed under warranty or not.
I will update as soon as I hear from them.
Until then, try to see if it changes when you hold the phone differently, for example if you grip it more firmly or hold it in another way.
Click to expand...
Click to collapse
When did you send it in and when did they receive it(if you were not there when they got it).
Also how long has it been without your phone?
The samsung service center is shut in my area today.
I will go to them tomorrow and get this sorted out.
Its not like the phone was cheap or anything.
I actually sent it to my uncle in Germany because it was purchased there.
He went to the store where he bought it and the store owner immediately sent it to samsung and said that probably by this Tuesday or Wednesday (so tomorrow or in 2 days) he will get an answer from them and see what's going on.
aditya_90 ,
Just to let you know that Samsung are sending me a new phone to replace the damaged one.
I sent in my phone for repairs and they replaced the LCD module. The problem is now gone.
I suggest that you should do the same while the warranty still holds since it appears to be the LCD that failed somewhat.

Blank Screen problem

Hey guys,
Just bought a VS986(verizon) from ebay, Seller assumed it was a bad screen/lcd causing a blank screen. I just finished replacing the lcd and screen and still have a black screen, i'm assuming it the motherboard?
it powers up, the phone makes a clicking sound when I touch the screen and i've even managed to access the keypad on the phone somehow (can hear the button tones). i've tried a factory reset, but without a display it's useless..
any thoughts OR does someone have a MB they wanna sell?
thanks in advance!
Jim
mystic122468 said:
Hey guys,
Just bought a VS986(verizon) from ebay, Seller assumed it was a bad screen/lcd causing a blank screen. I just finished replacing the lcd and screen and still have a black screen, i'm assuming it the motherboard?
it powers up, the phone makes a clicking sound when I touch the screen and i've even managed to access the keypad on the phone somehow (can hear the button tones). i've tried a factory reset, but without a display it's useless..
any thoughts OR does someone have a MB they wanna sell?
thanks in advance!
Jim
Click to expand...
Click to collapse
be aware this person wants to buy at low price LG G4 mother boards funtioning and not reported lost or stolen go for $200 the boards it self
Found! Please Disregard...

Categories

Resources