Develop Bugs

Yakumo PDA delta bootloader needed! PLz Help

Hi
My name is Basilis Moustakis.By mistake i bought a Yakumo PDA delta
300 in German. My second and big mistake was that I tryed to update ROM with a bad winceimg.bin file in order to change the language from german to english.Currently i have jtag it using some information from this forum:
http://www.mtekk.com.au/forums/viewtopic.php?t=5090&start=0&postdays=0&postorder=asc&highlight=
But i am not able to find the correct image file to flash the
booloader
and make the updade tool work again.I also found that for mio168 the
correct IPL image bootloader file is 336UTR11.bin but i can find that
either.Can you help me bring my PDA live again by sending me a
correctfile to flash bootloader and complete full image (winceimg.bin) to upgrade it to english.
Thanks for your time in advance.
Basilis Moustakis

Hi
Hi
I have got YAKUMO 300GPS too. I bought this with German soft.
I update Rom to English version.....correct rom is MIO168 ENG ROM.BIN
Send me e-mail then i send to you link where is it
But i need a help, what connect JTAG to YAKUMO??
I download Windows Mobile 2005 for PocketPc Yakumo, and i write this ROM to my YAKUMO!!!!! Pda is dead. I think that only Jtag can help me, but I don't known what connect it!!
Please help me!

need help
Oyama can post the link to this bin file or send me a mail .

Complete package for upgrade hx2xxx to WM6

Inside:
-WWE-hx2000_PPC03_downgrade for return to WM2003se
-Wm5.0 for hx2000_1.00.00.L_ENG
-Wm5.0 for hx2750_1.00.00.L_ENG
-SP32205_1.00.03.H_RUS
-SP32205_1.00.03.H_RUS
-SP32408_1.00.00.H_ENG
-SP33003_1.02.00.H_ENG
-WM6.0_5.20.00.H_ENG
-Terminal_RDP
-Quarta
-hx2x90b_Mui_Quarta7
http://depositfiles.com/en/files/1799963
Thanks to Niko512 from 4pda!

I've an hx2415... would it works?
and when I've finished to DL... what must I do?

I've to Use Pre-BL mode?
'coz doesn't works for mine

I'm on WM5 but it's going really slowly ...
...I'm not able to upgrade to WM6 (SKU problem...?) and I need help about it...
Question: it's normal that PDA going so slow with WM5 ? when I clic on "settings" 2 (or 3) seconds needed

Please give another link to Advanced_pack_for_hx2xxx_to_WM6.exe , cause the original one is too slow for download and had a CRC.
please help me.
thx

Did you succed download ?
zeRobee said:
Please give another link to Advanced_pack_for_hx2xxx_to_WM6.exe , cause the original one is too slow for download and had a CRC.
please help me.
thx
Click to expand...
Click to collapse
============
DEAR
Is all OK ? You succed to download and to INSTALL wm6 ?
Please give me directions :
i have Hx2110 .
thanks

Please directions //....STEP BY STEP!
dancer_69 said:
Inside:
-WWE-hx2000_PPC03_downgrade for return to WM2003se
-Wm5.0 for hx2000_1.00.00.L_ENG
-Wm5.0 for hx2750_1.00.00.L_ENG
-SP32205_1.00.03.H_RUS
-SP32205_1.00.03.H_RUS
-SP32408_1.00.00.H_ENG
-SP33003_1.02.00.H_ENG
-WM6.0_5.20.00.H_ENG
-Terminal_RDP
-Quarta
-hx2x90b_Mui_Quarta7
http://depositfiles.com/en/files/1799963
Thanks to Niko512 from 4pda!
Click to expand...
Click to collapse
------------------------------------
Please directions //....STEP BY STEP!
Who is Niko512 ?
It is a Greek ?
gia sou Niko ....

Anyone had any success with an ipaq 2410 as every attempt at it has resulting in hanging at formatting PS right at the end.
If anyone could provide a guide that would enable me to use WM6 on the 2410 Id be grateful.
Even followed this with no success
http://forum.xda-developers.com/showthread.php?t=372799
EDIT: Finally got WM6 on my mobile thank **** for that.

Having trouble to upgrade my hx2410 WinCE4.21 to WM5
Hi,
I'm having trouble to upgrade my hx2410 to WM5. I successfully connect/sync my hx2410 with my pc thru bluetooth. But the upgrade process always stops at 0% and says to reset the hx2410. I tried many time and it is still the same problem . Anybody knows what might be the problem i'm facing? I wanted to install iGuidance for PPC on it and I need WM5. Help please.
Thanks

benkud said:
Hi,
I'm having trouble to upgrade my hx2410 to WM5. I successfully connect/sync my hx2410 with my pc thru bluetooth. But the upgrade process always stops at 0% and says to reset the hx2410. I tried many time and it is still the same problem . Anybody knows what might be the problem i'm facing? I wanted to install iGuidance for PPC on it and I need WM5. Help please.
Thanks
Click to expand...
Click to collapse
You can't update device through Bluetooth - it's impossible
You will need a USB cable or Cradle.
Go to my thread LINK and read first 3 posts

h iapq hx2490 wm6 rom?

Can somebody gives to me some links with working wm6 rom for hp hx2490 ?

http://forum.xda-developers.com/showpost.php?p=1516882&postcount=66

Sorry but the first rom(i a with him) i have it ,can somebody give link(working)for the second one?

And can somebody tell me how to update rom on hp hx2490 onder vista ??????? HELP HELP HELP

??????/ some ideas?

please can somebody give me a link or something with windows mobile 6 for hp hx2490??? here is my e-mail [email protected] if somebody have it and want to send it to me

http://rapidshare.com/files/81915200/WM6.0_5.07.04_HP2000_B18533.rar

and how to instal nk.nbf with out hpruu?

see post with the link to the tutorial above (post 2)

this is not working. hpruu says to me that the rom is not in hpruu list or in hpruu.ini
in .ini a've renamed the file but nothing same errors???

1. is your device in white bootloader mode(buttons 2+4+reset)?
2. after you put it in the grandle you pushed the calendar button to connect?
2. You run the sp32408 update utility sp32408 and after the checks replace the nbf file as described at the tutorial?

From where i can download sp32408 ?

which one
http://h20000.www2.hp.com/bizsuppor...TypeId=215348&prodSeriesId=421399&tx=sp32408

i've tried them all ,but nothing and this" 2. You run the sp32408 update utility sp32408 and after the checks replace the nbf file as described at the tutorial?" is not woking.

Have you succeed to flash any wm6 rom on your device? How you did it? I didn't flashed never under windows vista so maybe this is the problem. And I have an hx2490b not hx2490 and I think the not b series maybe need a different way. But many people did it and If you search in the forum you can find some info. Also if I remember well on 4pda.ru site topic they said that the rom can flash without to use other ruu utility.
So if you flashed the device with a wm6 rom before, use that ruu utility and try to change the nbf file on above post(maype needs to rename it or first leave to pass the check and replace with the renamed file after, use white bootloader mode...)

1 i have 2 os xp and vista
2 i make my rom update under xp
3 my pda is hp ipaq hx 2490
4 here in forum is having in one theme 2 roms for my ppc ,i am with first but i want to be with te second one,but i can't because links doesnt works.

i can't download this
PDAViet WM6 for HP iPAQ 2*** series:
http://www.pdaviet.net/showthread.php?t=15560
Direct Link to Rom !Updated!
1/1 http://sym-viet.com/PhamQuang/HP/WM6...00_PDAVIET.rar
Password: PDAVIET
or
try the old links:
1/2 http://tom-love.net/ROM/HP/WM6.0_5.0...2000.part1.rar
2/2 http://rapidshare.com/files/60450793...part2.rar.htm
can somebody gives working link for this rom?

windows mobile 5 on imate pda2k / qtek 9090

how can i do this?i tried to download a lot of files from this website but they didn't work....
can you help me? i'm italian.
can you make me a simple guide to change the rom in my phone?
thanks a lot

yes plz...same problem here
any one

You have to read and understand English. This should be enough to upgrade even to WM6.1. Start using Wiki.
PS: downloading files without understanding what are they for is the best way not to do anything or to destroy your device.

what i mean to say is that i want to upgrade my imate pda2k windows from 4 to 5..
for that the file named Version 5.1.1700 Build 14343 - Patched by Mamaich V3
on this link is not downloadable..
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
can someone help me to get this file plz....
thank u

Does anyone have WM6.0 GER rom?

Hi folks,
I am looking for an WM6.0 (not 6.1) GER rom file for the HTC S620. I remember there was one in the WM6-upgrade guide that was posted here but seems to be deleted. So if anyone has a copy of that file I would appreciate getting a link or contact.
thx in advance

as far as i remember, it was available for free from HTC-website. Just register your htc, and there it is.
See: http://www.htc.com/www/SupportDownload.aspx?p_id=2&cat=2&dl_id=15
if link doesnt work: go to htc.com, register your device, login and then you have in "Support" to select the S620, and scroll down to the windows mobile 6 upgrade. (it seems you have to re-enter your product serial no.)

Thanks for the link, but it doesn´t work anymore.

Here: http://megaupload.com/de/?d=29EWLBYF