Can somebody gives to me some links with working wm6 rom for hp hx2490 ?
http://forum.xda-developers.com/showpost.php?p=1516882&postcount=66
Sorry but the first rom(i a with him) i have it ,can somebody give link(working)for the second one?
And can somebody tell me how to update rom on hp hx2490 onder vista ??????? HELP HELP HELP
??????/ some ideas?
please can somebody give me a link or something with windows mobile 6 for hp hx2490??? here is my e-mail [email protected] if somebody have it and want to send it to me
http://rapidshare.com/files/81915200/WM6.0_5.07.04_HP2000_B18533.rar
and how to instal nk.nbf with out hpruu?
see post with the link to the tutorial above (post 2)
this is not working. hpruu says to me that the rom is not in hpruu list or in hpruu.ini
in .ini a've renamed the file but nothing same errors???
1. is your device in white bootloader mode(buttons 2+4+reset)?
2. after you put it in the grandle you pushed the calendar button to connect?
2. You run the sp32408 update utility sp32408 and after the checks replace the nbf file as described at the tutorial?
From where i can download sp32408 ?
which one
http://h20000.www2.hp.com/bizsuppor...TypeId=215348&prodSeriesId=421399&tx=sp32408
i've tried them all ,but nothing and this" 2. You run the sp32408 update utility sp32408 and after the checks replace the nbf file as described at the tutorial?" is not woking.
Have you succeed to flash any wm6 rom on your device? How you did it? I didn't flashed never under windows vista so maybe this is the problem. And I have an hx2490b not hx2490 and I think the not b series maybe need a different way. But many people did it and If you search in the forum you can find some info. Also if I remember well on 4pda.ru site topic they said that the rom can flash without to use other ruu utility.
So if you flashed the device with a wm6 rom before, use that ruu utility and try to change the nbf file on above post(maype needs to rename it or first leave to pass the check and replace with the renamed file after, use white bootloader mode...)
1 i have 2 os xp and vista
2 i make my rom update under xp
3 my pda is hp ipaq hx 2490
4 here in forum is having in one theme 2 roms for my ppc ,i am with first but i want to be with te second one,but i can't because links doesnt works.
i can't download this
PDAViet WM6 for HP iPAQ 2*** series:
http://www.pdaviet.net/showthread.php?t=15560
Direct Link to Rom !Updated!
1/1 http://sym-viet.com/PhamQuang/HP/WM6...00_PDAVIET.rar
Password: PDAVIET
or
try the old links:
1/2 http://tom-love.net/ROM/HP/WM6.0_5.0...2000.part1.rar
2/2 http://rapidshare.com/files/60450793...part2.rar.htm
can somebody gives working link for this rom?
Related
Well here it is . I have upgraded my qtek with http://www.qtek.nu/files/RUU172752WWE.zip from1.66 to 1.72. I did not hard reset the device before the upgrade so I had some problems during upgrade bit now all is ok. If anyone wants to upgrade also please find the solution for the country ID problem that mey occur. http://forum.xda-developers.com/viewtopic.php?t=12100 I DID not have that problem but you might. So before the upgrade please inform yourself about the problems that you may face.
Langurage ID error 121 during upgrade
Hello,
I get the language ID Error 121 when trying the Upgrade to my Qtek 2020 French version Rom 1.66.02 FRA radio 1.10.00 Version de proto 1337.18 Version de Extrom 1.66.219
I want to use my Qtek in English that is my goal.
Thanks is advance
Re: Langurage ID error 121 during upgrade
mghinc said:
Hello,
I get the language ID Error 121 when trying the Upgrade to my Qtek 2020 French version Rom 1.66.02 FRA radio 1.10.00 Version de proto 1337.18 Version de Extrom 1.66.219
I want to use my Qtek in English that is my goal.
Thanks is advance
Click to expand...
Click to collapse
You need to alter the ROM headers. See my post here for details on how to do it and also on how to avoid future problems.
I get the error not a valid win32 app when opening himagetda
I cant open himagetdevicedata.exe because i get the error not a valid win32 app when opening himagetdata.exe Also, when I upack ruu166150wwe I cant find the directory with the subdirectory containing the files himaclearjumpcode etc.
Thanks again in advance
I got to the Himaclearjumpcode using winrar thanks now
I just need to load himagetdevicedata.exe to load onto my qtek 2020
rom 1.66.02 FRA
date of rom 02/03/04
radio 1.10.00
de proto 1337.18
de extrom 1.66.219
My Qtek had the higher rom on it when i bought it but I was todl I needed to downgrade the rom to make it work in English. I have not been able to get it to work and I wonder do I need to upgrade the French version before changing to English. I just want it to work in English.
Thanks in advance
I forgot to mention that I am using Guest with my USB Active
sync 3.71. I copy the himagetdevicedata into the Mobile Device and I can see it on my qtek but I just cannot open it. That is the problem.
Thanks and sorry for so many posts
Re: I forgot to mention that I am using Guest with my USB Ac
mghinc said:
sync 3.71. I copy the himagetdevicedata into the Mobile Device and I can see it on my qtek but I just cannot open it. That is the problem.
Thanks and sorry for so many posts
Click to expand...
Click to collapse
You need to execute HimaGetDeviceData.exe on the device directly by tapping on it. Then copy the DeviceData.txt file it produces back onto your PC and view it with Notepad on your PC.
I have encountered an problem with bluetooth. I am trying to conect to gprs using Qtek 2020 with Nokia 6600 and P900. Before upgrade it went smoothly now not. So I am conecting to gprs via 6600 or P900 and it is not working
I try to execute the himagetdevice data by tapping on it
on my Qtek but it will not open. I copy it successfully on my laptop then it loads onto my Qtek but when I tap it to open, nothing happens. In other words, I cant open it. I also used winrar to get to the upgrade files himaclearjump, himagetdevicedata, etc but I cant take them from winrar to my Qtek. Is that because I did not buy winrar? I have upgraded my windows to SP2 so the program unzips automatically and I cant find the individual update files like I can in winrar.
Thanks
Re: I try to execute the himagetdevice data by tapping on it
mghinc said:
on my Qtek but it will not open. I copy it successfully on my laptop then it loads onto my Qtek but when I tap it to open, nothing happens. In other words, I cant open it. I also used winrar to get to the upgrade files himaclearjump, himagetdevicedata, etc but I cant take them from winrar to my Qtek. Is that because I did not buy winrar? I have upgraded my windows to SP2 so the program unzips automatically and I cant find the individual update files like I can in winrar.
Thanks
Click to expand...
Click to collapse
Please follow the instructions in my post here. Most of what you have been asking is covered in there.
To answer your questions anyway, when you run HimaGetDeviceData on your device there is no visual indication that anything has happened, but a file called DeviceData.txt will have been placed in the Windows folder of the device. No other files should be transferred to your device, as the upgrade process itself is run from the PC.
Subject: There are problems reported when flashing
PDAVIET Rom Black&Blue v3.7 For HTC Artemis & HTC Love ROM © by tom_codon
Issue: During flashing customized B&B v3.7 © (by tom_codon)
ROM, flasher stops at 3%-4%, stating - INVALID MODEL ID.
(it may other error messages appears as well, they are not analyzed yet)
Try following steps, it may solve your problem of flashing.
1. Download attached flasher;
2. Unrar to temp directory (like c:/XDA/);
3. Unrar ROM (TOM_Artemis_Black&Blue_v3.7.rar ©) to the same directory above;
4. Rename BB37.nbh file to RUU_signed.nbh;
5. Make sure usb cable is connected
6. Bring your device into bootloader
(http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets)
7. Start binary ROMUpdateUtility.exe, flash normally
Prerequisites:
- uspl is installed on your device;
- activesynch v.4.5 is installed (other version is not tested);
- os is win xp sp2 (other os were not tested);
Recommendations:
(as usual, best practice)
- always have original ROM for device before flashing;
- always have uspl installed before flashing;
: B&B v3.7 ROM does not re-flash SPL on Artemis. So, no need to re-flash uspl after flashing B&B v3.7 ROM.
OS, GSM, splash screen are re-flashed
hope this will help.
regards,
fdp24 said:
Subject: There are problems reported when flashing
PDAVIET Rom Black&Blue v3.7 For HTC Artemis & HTC Love ROM © by tom_codon
Issue: During flashing customized B&B v3.7 © (by tom_codon)
ROM, flasher stops at 3%-4%, stating - INVALID MODEL ID.
(it may other error messages appears as well, they are not analyzed yet)
Try following steps, it may solve your problem of flashing.
1. Download attached flasher;
2. Unrar to temp directory (like c:/XDA/);
3. Unrar ROM (TOM_Artemis_Black&Blue_v3.7.rar ©) to the same directory above;
4. Rename BB37.nbh file to RUU_signed.nbh;
5. Make sure usb cable is connected
6. Bring your device into bootloader
(http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets)
7. Start binary ROMUpdateUtility.exe, flash normally
Prerequisites:
- uspl is installed on your device;
- activesynch v.4.5 is installed (other version is not tested);
- os is win xp sp2 (other os were not tested);
Recommendations:
(as usual, best practice)
- always have original ROM for device before flashing;
- always have uspl installed before flashing;
: B&B v3.7 ROM does not re-flash SPL on Artemis. So, no need to re-flash uspl after flashing B&B v3.7 ROM.
OS, GSM, splash screen are re-flashed
hope this will help.
regards,
Click to expand...
Click to collapse
Thanks for your method.I want write it in my first post in Thead Rom Back&Blue v3.7 but u already writed it.Thanks again..
tom_codon:
it would be good to see response.
normally it should work.
regards,
Htc3300 non branded *does nto work for me*
I've read all the posts and cannot get past 3%
No problem installing 3.04
Can anyone help ... in particular someone with an unbranded device who has been successful with this
Thanks
http://htc.lan13.ro/ANDY_TOM_WM6_14072007_002.nbh
thats the one you need to try
http://forum.xda-developers.com/showthread.php?t=317160
read this post, and all will work fine
How to open .nbh file
Sorry if I should know this ..........
how do I open this file?
Thanks for your help with this
You guys are the best !!
Figured it out
Thanks a million
[email protected] said:
http://htc.lan13.ro/ANDY_TOM_WM6_14072007_002.nbh
thats the one you need to try
http://forum.xda-developers.com/showthread.php?t=317160
read this post, and all will work fine
Click to expand...
Click to collapse
Thanks man. After a lot of tries this thread help me to install BB3.7. You guys are great.
USPL
Hi all
I try to istall B&B but nothing on my xda orbit CID unlocked.
After upgrade to WM6 from 02 i return it to WM5 from O2, at 3% upgrade close, what is USPL and where i can found it?
Thank you
a40 said:
Hi all
I try to istall B&B but nothing on my xda orbit CID unlocked.
After upgrade to WM6 from 02 i return it to WM5 from O2, at 3% upgrade close, what is USPL and where i can found it?
Thank you
Click to expand...
Click to collapse
Link here:
http://forum.xda-developers.com/showthread.php?t=311403
please read in Forum..
tom_codon said:
Link here:
http://forum.xda-developers.com/showthread.php?t=311403
please read in Forum..
Click to expand...
Click to collapse
Thank you my friend
Hi there! Can anyone tell me what I should to to change the language of the phone. It's german now and i would like to change it to english. And also, is there a way to remove all the O2 stuff from the menus?
Thanks
If you simply want the original English O2 WM5 setup then:
Download the files on this thread and follow the instructions to temporarily CID unlock the device: http://forum.xda-developers.com/showthread.php?t=311403 WARNING this may not work with Windows Vista, use Windows XP!
Download and run the original O2 ROM installer from post 13 on this thread: http://forum.xda-developers.com/showthread.php?t=314866&page=2
Thanks MaskedMarauder... Can you please tell me which programs I need on my PC to do all of this? Do I need anything except the stuff from the original CD? Also can I use this ? http://forum.xda-developers.com/showthread.php?t=318835
You don't need the CD as long as you already have the latest version of Activesync installed, just the CID unlocker (download from the link I gave above) and a ROM image to flash. The B&B 3.7 will work fine if that is what you want.
Hi I did everything that was said in the forum but at the end of the update, there was an error which said that the model of the phone is not suitable or something... Can you please provide me with a more easy and clearly explained way of changing the language of the Windows Mobile on my XDA Orbit.
Thank you
I have wince 2003 a05 installed in my x50v. I can't see any BIS, although it say s 128M ROM in the system information. Someone said this can be solved by changing the language. But I can't find any wince 2003 ROM (nb0 files) available online. Can anyone tell me how to solve my problem and upload required ROMs? Thanks!
teaonly said:
I have wince 2003 a05 installed in my x50v. I can't see any BIS, although it say s 128M ROM in the system information. Someone said this can be solved by changing the language. But I can't find any wince 2003 ROM (nb0 files) available online. Can anyone tell me how to solve my problem and upload required ROMs? Thanks!
Click to expand...
Click to collapse
you HAVE seen this thread, have you not ??
http://forum.xda-developers.com/showthread.php?t=322498
why bother with 2003 ( not even 2003SE ) - when you can have WM6 ??
~~~
If you don't like it ... all I can find is 2003SE here:
http://www.efsoft.it/romforpdappc.htm
~~~~~
Thanks! Nice website, man!
To be honest, I have tried two ways two upgrade my x50v from 2k3 A05 to WM5 which is a pre-requirement for WM60:
1) use Dell's upgrade program (failed at the last step, formatting rom 30%)
2) use SD image loader with WM50 A01 Eng ROM files (failed at "erasing storage 30%)
I was just wondering if there is any hardware problem of my ROM. Maybe that's why I can't see the ROM in 2k3 A05 system.
I also tried using language change (Japanese <-> English). But it didn't work. I still can't see ROM in my system.
I even tried writing WM60 ROM directly, but also failed at "erasing storage".
Is there any software that can diagnose the ROM?
Thanks again!
who knows from all the playing around you have done that you "muddy" up your device and causes conflicts ...etc ???
I would suggest:
hard reset your device ---That should revert it back to factory settings.
and now you can start FRESH upgrade/downgrade ...etc !!!
If you decided to experiment with the link I gave ...
http://forum.xda-developers.com/showthread.php?t=322498
make sure you read throughly the "required" part of the post before proceeding !!!
""
Attention!
If you have Windows Mobile 2003SE ROM on your device, FIRST, please download THIS ARCHIVE (RAR 32.4 MB) (Mirror),
/ and update your PDA to A01 Windows Mobile 5 ROM.
/ After that, go to Dell site, download official WM5 A02 ROM and update your PDA to WM5 A02 ROM.""
It's a used x50v. I got it a couple weeks ago.
As I mentioned, I can't upgrade to WM5. Leave WM6 alone. Thank you though.
how can i do this?i tried to download a lot of files from this website but they didn't work....
can you help me? i'm italian.
can you make me a simple guide to change the rom in my phone?
thanks a lot
yes plz...same problem here
any one
You have to read and understand English. This should be enough to upgrade even to WM6.1. Start using Wiki.
PS: downloading files without understanding what are they for is the best way not to do anything or to destroy your device.
what i mean to say is that i want to upgrade my imate pda2k windows from 4 to 5..
for that the file named Version 5.1.1700 Build 14343 - Patched by Mamaich V3
on this link is not downloadable..
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
can someone help me to get this file plz....
thank u