Develop Bugs

Imate / Dopod 900 / Universal in Australia

Hi,
I recently bought a Dopod 900 from Taiwan and having read the entire upgrade forum I am still slightly unsure about the best way to switch to English. From my reading I see that O2 has issues with the extended ROM (although I'm unclear what extended ROM really means, my best guess so far is that its preloaded applications) and that the Jasjar suffers from system hangs and performance (speed).
I understand that there are two options readily available to me;
1) Use the O2 ROM located at http://www.my-xda.com/xdaexec_soft.html (since I'm in Australia I just copied their sample phone number into their form to continue on from page 2).
2) Or use the JasJar ROM located at ftp://ftp.xda-developers.com/../Uploads/Universal/Shipped ROM/JASJAR_WWE_11353_137_10301/
And if I'm correct, unzip and copy the modified ROM installer (located at ftp://ftp.xda-developers.com/../BlueAngel/Tools/) into the folder containing the un-zipped contents of the ROM archive and use MaUpgradeUt_noID to perform the ROM upgrade.
However, I've noticed in the signatures that people have all sorts of different versions of;
a) The OS ROM
b) The extended ROM
c) The radio ROM
I've found out that my Dopod has;
CE Image: 1.13.36
Ext Image: 1.13.134
Radio: 1.04.02
And that the Jasjar ROM image (JASJAR_WWE_11353_137_10301 - which has a filename of JASJAR WWE 11353 137 10402) located on this site is;
CE Image: 1.13.53
Ext Image: 1.13.137
Radio: 1.04.02
I guess the following questions are really targeted towards Australians, since the Jasjar has been available now for a short time and there would be some users downunder, I would like to know;
1) what versions are they running?
2) what provider/plan they are using?
3) what applications are they using (skype, pdf reader etc).
(I noticed on my Dopod, which still has the chinese OS on it, it is installed with KKBox, Pocket MSN, ClearVue PDF, Zip, and Word, Excel, Powerpoint, etc).
I do not know what KKBox is. And what's funny is that with the Voice Commander, I happen to know that "saigen" is see-you-later in madarin which stops the Voice Commander application. However I'm not too keen on learning madarin just to run my PDA.
So before I take the plunge and convert to English I would like to get some feedback from locals as to what they are running.
One last point, I got quoted from PDA King in Taiwan (I used a phone card to call) NT$1200 to switch my PDA to English. When I asked them about getting a copy of the OS on CDROM for furture restores I was advised they don't use a CDROM before its burned onto the ROMs. I think they are having me on, considering the talk in these forums, but I'm curious if anyone in Taiwan has had an english conversion done for them by a retailer?
Regards
Michael

Hi,
I found a Dopod site at www.dopodasia.com that stated "In addition, new ROM can be downloaded in “Member” section if you subscribed as a Dopod member"
The membership registration page is located at http://210.64.124.195/Dopod_en/member/right.aspx
Unforuntately the registration page is rejecting my serial number, I'm at this moment calling them for help to login. In the meantime, has anyone sucessfully logged on, and what ROMs are available?
Regards
Michael

Hi,
The Dopod Asia site seems to have a good FAQ for the Dopod 900
http://210.64.124.195/Dopod/Singapore/En/Support/FAQ/3Gsubnote/?sm=Left1_pro_9_1_1
Regards
Michael

Michael,
Did you manage to register on the Dopod site? My Serial # was accepted but the next page with more detail got stuck on the Account field right after Nickname field. Any idea what you need to enter there?
Thanks for any help yo umight be able to provide. Regards

Hi,
Not yet, we caught them at the end of the business day. They advised us they would reply via email, but we're gunna call again tommorrow morning as a little reminder.
Are you able to paste a screen shot of the next page, that way I can see what's coming up and maybe ask them direct what they need (save me trying to work it out).
Michael

Hi,
I got in, this is what I did...
1) Selected "have not yet purchased" - this takes me directly to the account details page and bypasses the request for a valid serial number.
2) I thought "Account" was something to do with your provider, it isn't it is the name you want to call your membership account. You use the "account" name and "password" to login. So account can be anything.
3) Then you get sent an email confirmation with an activation link, just click the link and login.
I'm in at the moment the only thing I can see that can be downloaded is the user's manual, the "home page" in the member's area says...
Dear Client:
Thank you for purchasing Dopod products. To get the most enjoyment out of the products, we continue to cooperate with domestic and international companies to deliver updated services and downloadable programs for you.
Please click and download the program according to the description of Games or Application Programs. We will constantly provide work-related, modern living, games and other application programs for you. Thank you for your continuing feedback to us!
Dopod International Corp.
...I think I will still call them and ask them about where the ROMs can be downloaded from as stated in this quote, "In addition, new ROM can be downloaded in “Member” section if you subscribed as a Dopod member." and where the applications and games reside (or a timeline of when they are due).
Regards
Michael

michaelg said:
I do not know what KKBox is. And what's funny is that with the Voice Commander, I happen to know that "saigen" is see-you-later in madarin which stops the Voice Commander application. However I'm not too keen on learning madarin just to run my PDA.
So before I take the plunge and convert to English I would like to get some feedback from locals as to what they are running.
One last point, I got quoted from PDA King in Taiwan (I used a phone card to call) NT$1200 to switch my PDA to English. When I asked them about getting a copy of the OS on CDROM for furture restores I was advised they don't use a CDROM before its burned onto the ROMs. I think they are having me on, considering the talk in these forums, but I'm curious if anyone in Taiwan has had an english conversion done for them by a retailer?
Regards
Michael
Click to expand...
Click to collapse
First one kkbox is music box same as ipod,only can use in Taiwan others
place are useless.
2nd I don't think PDA king in Taiwan can give you any copy of ROM ,
because Dopod don't have any English ROM , they just flush I-mate
or O2 ROM for you,you can get ROM from here as you mention
before.
3th Dopod Taiwan didn't post any ROM upgrade for Dopod 900, I will try
to login Dopod Asia and post here.

Hi,
I've recieved the following response from Dopod Singapore (www.dopodasia.com). By the way I'm hoping that since the Singapore branch of Dopod is english speaking, that they will have an english version of the Dopod ROM.
Has anyone tried to register as a member with the other dopod sites?
Dear Sir:
1) Is there any difference in between logging in as a member who has purchased to one that has not?
A member who has purchased will see all the contents.
2) Where in the member area can I download the ROMs, which were referred to in this quote, "In addition, new ROM can be downloaded in “Member” section if you subscribed as a Dopod member.", located under the title trouble shooting on page, http://210.64.124.195/Dopod/Singapore/En/Support
Currently we don’t have any new ROMs for Dopod 838 and 900. if we release a ROM code, you will see it.
3) Where in the member area can I download the applications and games, which were referred to in this quote, "Please click and download the program according to the description of Games or Application Programs." located on the member home page, on page, http://210.64.124.195/Dopod_en/default.aspx
We will keep putting applications, games and ROM codes on our web site, if there any news will send a e-mail to u.
Regards
Michael

Dopod 900 How to change chinese rom to english

I would like to change chinese rom to english rom from my dopod 900. Can anyone send me the english rom and the instruction?thanks

The Dopod 900 is a universal, I have moved this thread to that section.
Check wiki (top left of this screen)

It is for the O2 xda IIs

Hum.
And that link you pressed was at the top left of your screen and said wiki.

Well, I read through the wiki, and I still have one small problem. I CANT access the bloody FTP... Idk why, considering I have no problem accessing any other ftp. I've tried with flash FXP and fireFtp. I'm using xda, lower case, for user/pass and the server address ftp.xda-developers.com...
Any ideas? I would really like to get a ROM upgrade. Thank you!

Go to wiki
go to the ftp site page
click on the link for the root
It will open explorer , download from there.

O2 xda Orbit question

Hi there! Can anyone tell me what I should to to change the language of the phone. It's german now and i would like to change it to english. And also, is there a way to remove all the O2 stuff from the menus?
Thanks

If you simply want the original English O2 WM5 setup then:
Download the files on this thread and follow the instructions to temporarily CID unlock the device: http://forum.xda-developers.com/showthread.php?t=311403 WARNING this may not work with Windows Vista, use Windows XP!
Download and run the original O2 ROM installer from post 13 on this thread: http://forum.xda-developers.com/showthread.php?t=314866&page=2

Thanks MaskedMarauder... Can you please tell me which programs I need on my PC to do all of this? Do I need anything except the stuff from the original CD? Also can I use this ? http://forum.xda-developers.com/showthread.php?t=318835

You don't need the CD as long as you already have the latest version of Activesync installed, just the CID unlocker (download from the link I gave above) and a ROM image to flash. The B&B 3.7 will work fine if that is what you want.

Hi I did everything that was said in the forum but at the end of the update, there was an error which said that the model of the phone is not suitable or something... Can you please provide me with a more easy and clearly explained way of changing the language of the Windows Mobile on my XDA Orbit.
Thank you

Needed the Latest Official WM6 for Artemis?

Hello
i am looking for the latest ROM for my Artemis!
the current ROM i am using is ok its just i am looking for the most updated one!
details of my ROM are down
Thanks for Advance

Just login here: http://member.htc.com/member/login.aspx?fm=eu&ln=en and get latest ROM, but I think there is only one version of WM6 ROM from HTC (for Artemis of course).

varvocel said:
Just login here: http://member.htc.com/member/login.aspx?fm=eu&ln=en and get latest ROM, but I think there is only one version of WM6 ROM from HTC (for Artemis of course).
Click to expand...
Click to collapse
thanks mate - i tried there but i cant see any! i dont know why! there is no rom listing or anything!
any other alternative?

Hi,
try My Download -> Phone Software Updates. Then click HTC P3300 image and you should see 2007-10-03 Windows Mobile® 6 upgrade.
Good luck.

i follow the instructions as provided but still i get the message that no phone software is available now please try again later!
i've been getting this for ages
thanks mate for your follow up - your help is appreciated

me either. didn't see the rom lists. plus, when i registered on the website. i got the error saying that my sn was invalid. how could this be and how to resolve? thanks in advance.

u know whats funny
i tried to email the technical support service more than 10 times & they never responded to me now i get the abbreviation
headache and troubles company

windows mobile 6
Theirtech support contacted me with an ftp address to download windows mobile 6

OS 3.15 Lang 0415 PLK build 18125
http://hotfile.com/dl/12658574/583bbc2/WM6_ERA_3.15.118.1.zip.html

Need Help with ROM install its for CHINA (come quick) ......

My company got some phones to send to the people in China and I'm having some problems getting this Phone to install Windows Mobile 6 Chinese version. I was wonder if anyone could help me out. Here's where I'm at
Microsoft said the vendor HTC doesn't support it but this ROM should work.
Link To Rom:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
(I'm using the one that says Chinese Version (CHT))
This is what they sent. Well I've tried using this ROM and I'm getting an 264 Error (I can't read the rest cause its in chinese but it seems from doing some research that it says it can't connect to the Device.) Even though i have it plug in with a USB cable and its at the tri-color screen and says USB.
The Tri-Color Screen Says
Herm200
IPL-1.00
Herm200
SPL-1.10
MS internal use only (side note these were donated from Microsoft)
I've done the HERM_Unlock_v2a and it said success also did the Radio part no problem there either but I still got the same 264 error.
This is for a very very good cause and if I could get some help I'd be really thankful.
Also a stick would be nice

I'm a Chinese user from Hong Kong and I'll try my best to help you out. Just curious, which part of China are you sending the Hermes devices to? Only Hong Kong people use Traditional Chinese, the rest of China use Simplified Chinese.
Are you flashing it with Windows XP or Windows Vista? Have you tried flashing from a microSD card? What are the devices branded as? HTC TyTN, Dopod 838pro, Softbank X01HT or something else? Did you flash HardSPL onto them before flashing the ROM you want?

Phil_123 said:
I'm a Chinese user from Hong Kong and I'll try my best to help you out. Just curious, which part of China are you sending the Hermes devices to? Only Hong Kong people use Traditional Chinese, the rest of China use Simplified Chinese.
Are you flashing it with Windows XP or Windows Vista? Have you tried flashing from a microSD card? What are the devices branded as? HTC TyTN, Dopod 838pro, Softbank X01HT or something else? Did you flash HardSPL onto them before flashing the ROM you want?
Click to expand...
Click to collapse
They are going to the CDC in China. I flashed them with HardSPL and managed to get the ROM to load. Is there a keyboard I can load to them if they want to type in Simplified? Other then CE-Star of course. Looking for something free. Or do you have a ROM that has simplified on it? I contacted microsoft and they said they didn't have it which I found strange the ROM i linked from earlier is the only one they know about. 10 bucks says I wasn't talking to the right person that would know.
The guys down here in Atlanta said that most people and China can read Traditional just most can't type it. So if I can find a keyboard to load on all these phones we should be okay. Sorry its taking me so long to respond I've been loading phones for 2 or 3 days now
Oh and its Windows Mobile 6 and HTCs

cobra2497 said:
They are going to the CDC in China. I flashed them with HardSPL and managed to get the ROM to load. Is there a keyboard I can load to them if they want to type in Simplified? Other then CE-Star of course. Looking for something free. Or do you have a ROM that has simplified on it? I contacted microsoft and they said they didn't have it which I found strange the ROM i linked from earlier is the only one they know about. 10 bucks says I wasn't talking to the right person that would know.
The guys down here in Atlanta said that most people and China can read Traditional just most can't type it. So if I can find a keyboard to load on all these phones we should be okay. Sorry its taking me so long to respond I've been loading phones for 2 or 3 days now
Oh and its Windows Mobile 6 and HTCs
Click to expand...
Click to collapse
In case you flashed CHT Rom, I suspect, simplified Chinese character set is not loaded at all. No matter what keyboard you use no way to show simplified characters, respectively the typing will be for traditional only.
There is a MS SIP for Chinese characters, but honestly I found it not that good as CE-Star. Dont have a link but believe you can find it on MS sites
There is another SIP named PlumSIP, which I use, but only the version for hardware keyboard. I found it very convenient. Search google and sure will find a link to dev page.
btw, I use english Rom with installed Chinese characters support - works very well for me - no probs with text, e-mails and surfing internet

If you can read chinese. go to this forum http://bbs.xbeta.cn there's a chinese rom for the hermes and has chinese read/write capability.

In this case, I suggest you go to the most popular PDA forum in the main land of China and the web site is bbs.pdafans.com. You can find all kinds of CHS roms for Hermes and most of them are very good.
I'm in China main land and I'm using Hermes as well, but I'm running WWE rom on my hermes as I prefer to official rom's I just replace the original file wince.nls with another one which Chinese is supported with and add Chinese fonts and tweak registry. As a result of all what I do, simply Chinese is supported very well in a WWE rom.
I'm hoping this helps.

I believe this is what you need. I think you need to register to view the post.
http://bbs.xbeta.cn/viewthread.php?tid=7821&extra=page=1&filter=type&typeid=53

seasky3246 said:
In this case, I suggest you go to the most popular PDA forum in the main land of China and the web site is bbs.pdafans.com. You can find all kinds of CHS roms for Hermes and most of them are very good.
I'm in China main land and I'm using Hermes as well, but I'm running WWE rom on my hermes as I prefer to official rom's I just replace the original file wince.nls with another one which Chinese is supported with and add Chinese fonts and tweak registry. As a result of all what I do, simply Chinese is supported very well in a WWE rom.
I'm hoping this helps.
Click to expand...
Click to collapse
Hi, can you go into a little more detail about which replacement wince.nls you use and the other mods you do to increase your CHinese support? I currently run a wwe ROM with chinese fonts and input added by cab files (CE-Star sucks but it's all there is and I have no idea why there is nothing better when the market for something as good as the vista Chinese IME would be HUGE)
thanks!

mlalahoi said:
Hi, can you go into a little more detail about which replacement wince.nls you use and the other mods you do to increase your CHinese support? I currently run a wwe ROM with chinese fonts and input added by cab files (CE-Star sucks but it's all there is and I have no idea why there is nothing better when the market for something as good as the vista Chinese IME would be HUGE)
thanks!
Click to expand...
Click to collapse
I'm a Traditional Chinese user so I can't help you with Simplified Chinese input right now.
I use WWE ROMs on my X01HT, replaced the wince.nls, installed "CHT_IME_QVGA_F.cab" ripped from a official ROM for Traditional Chinese input (Chu on/Changjie keyboard input, Handwriting recognition) and a 14MB Microsoft JhengHei Bold font. Now it is capable of writing Traditional Chinese and viewing both Simplified Chinese and Traditional Chinese, Japanese, and Korean.
Wince.nls:
http://www.sendspace.com/file/cv2n4u
CHT_IME_QVGA_F.cab:
http://hn801.hkes.com/Data/SIP/CHT_IME_QVGA_F.zip

I saw somebody will come CDC in China, they are our counterpart.
I am working at US Embassy CDC department in China Beijing, If you have any problem with Herm200, please contact me, I can update this phone operating system to Chinese version.
My email: [email protected]

adminsun said:
I saw somebody will come CDC in China, they are our counterpart.
I am working at US Embassy CDC department in China Beijing, If you have any problem with Herm200, please contact me, I can update this phone operating system to Chinese version.
My email: [email protected]
Click to expand...
Click to collapse
We have a bunch of phones that I think are heading towards you. Not really sure I know there is some stuff going on this week. Had to take emergency leave last week so thats why I haven't been on here. PM me if you read this I will give you more details and call you.

adminsun said:
I saw somebody will come CDC in China, they are our counterpart.
I am working at US Embassy CDC department in China Beijing, If you have any problem with Herm200, please contact me, I can update this phone operating system to Chinese version.
My email: [email protected]
Click to expand...
Click to collapse
I sent you a PM. The guys left out this morning so I don't think you will see them till Monday or it could be all the way till Wednesday. Depending on what goes on.

cobra2497 said:
: Need Help with ROM install its for CHINA (come quick) ......
Also a stick would be nice
Click to expand...
Click to collapse
hahahhahahahahahahahahahahahhahahahahhahahahhahahahahahaha

mlalahoi said:
Hi, can you go into a little more detail about which replacement wince.nls you use and the other mods you do to increase your CHinese support? I currently run a wwe ROM with chinese fonts and input added by cab files (CE-Star sucks but it's all there is and I have no idea why there is nothing better when the market for something as good as the vista Chinese IME would be HUGE)
thanks!
Click to expand...
Click to collapse
Hey, I'm not sure if you have got this issue resolved. Here the following is what I usually do after a hard reset or flashing a new WWE ROM.
1. Replace with the original wince.nls file in \windows wiuth the one attached below. You can do this with resco file explorer or other app.
2.Copy the Chinese font file to \windows.
http://rapidshare.com/files/121391687/msyh.ttf
3.Implement a registry import for the fonts as attached file Reg Fonts.zip to get a good look.
4.Tweak the registry as following:
add HKEY_LOCAL_MACHINE\System\GDI\FontLinkMethods=1(string)
Then Chinese performs perfect in a WWE ROM. And also you can choose Chinese PRC in Regional Setting page.

Hi
this might be very stupid question
i have a htc tytn
i cant seems to see a /windows folder i only see " my windows base devics"
But it does not have the wince file .
What did i do wrong. is this drive not for my devices.
i have scahp's rom install

leetless said:
Hi
this might be very stupid question
i have a htc tytn
i cant seems to see a /windows folder i only see " my windows base devics"
But it does not have the wince file .
What did i do wrong. is this drive not for my devices.
i have scahp's rom install
Click to expand...
Click to collapse
You should see the /windows folder with a file explorer, either the one in the ROM or the well known resco file explorer. But maybe you can not find the file wince.nls as it's hidden by default. You can unhidden all files with resco file explorer and then you can see it. Antually you don't need to see this file. Just put the wince.nls attached in /windows folder and press OK to replace the original file.