Problem Dialup connection #777 - MDA III, XDA III, PDA2k, 9090 General

My Dialup always problem connect to Internet by dial #777.
I was use valid username and password but always display error wrong name and password.
i have 2 PDA phone XV6600 and Audiovox Thera. My thera normal connect to Internet but my XV6600 always problem.
My carrier not support EVDO, so i create manual PRL file to use in my carrier Telkomflexi.
I dont know this PRL file is main problem dialup connection? or other configuration i must set in my XV6600?
Help me!!

Related

Connecting Laptop to internet by Dialup connect. on pocketpc

Thank you for reading this, I really need your help.
Two options: which one below is true or possible?
1- It is possilbe to Connect my Laptop to internet via Dialup connect. on pocketpc phone? and connect my Laptop to pockect pc phone via Bluetooth.
Or should I use the dialup connection on my laptop to connect to internet using Wireless modem on my pocket pc phone?
does this make sense?
I have Siemens SX66.
You must be a mind reader because I was going to ask the same question.
Anyone's help would be greatly appreciated
I've successfully connected my XDAIIs to laptop for internet access.
On USB craddle, you can
1. Laptop connected to internet ( dial up / lan / whatever ) --> XDAIIs sits on craddle and connect to Active sync ---> XDAIIs can access internet
2. Use XDAIIs as the dial up modem via GPRS and your Laptop is able to access internet. This option u will need "HTC HUB" modem driver.
IrDA, you can
1. Use XDAIIs as the "Virtual" dial up modem via GPRS and your Laptop is able to access internet. This option u will need IrCOMM2k for emulating IrDA port on your laptop to see XDAIIs as its modem on its com port.
Bluetooth
This one i never try. I don't have bluetooth on my laptop :-(
As Forum Elders and experts have been saying...PLS TAKE SOMETIME AND EFFORTS TO SEARCH ON THIS FORUM and u will need the desired.
FYI, one can use 2s/2i/mini/Jam/XDA II ...etc as a wireless Modem via USB/Serial/Bluetooth/Irda.
Pls also take efoorts to read the manual which is provided with...
MR2046 said:
On USB craddle, you can
1. Laptop connected to internet ( dial up / lan / whatever ) --> XDAIIs sits on craddle and connect to Active sync ---> XDAIIs can access internet
Click to expand...
Click to collapse
Thank you my friend, This one I already know it.
MR2046 said:
2. Use XDAIIs as the dial up modem via GPRS
Click to expand...
Click to collapse
Yes, --------GPRS -------- I do not like to use GPRS. I want to use my PocketPC Phone number and dial to an ISP using my ISP account.
Can you help me this. I can connect my Laptop to my Pockect PC phone via BlueTooth dialup connection modem (in my pocket pc phone), but how can I connect my pocket pc phone to the internet using ISP dialup modem and not GPRS.
MR2046 said:
IrDA, you can
1. Use XDAIIs as the "Virtual" dial up modem via GPRS and your Laptop is able to access internet. This option u will need IrCOMM2k for emulating IrDA port on your laptop to see XDAIIs as its modem on its com port.
Bluetooth
This one i never try. I don't have bluetooth on my laptop :-(
Click to expand...
Click to collapse
thank you, btw: I WAS ABLE TO open my Laptop and put the USB BT dongle inside my laptop and this way, I have no problem, MY laptop is BT enabled now , if you like that here is a link: http://www3.telus.net/thewitt/BT/
hdubli said:
As Forum Elders and experts have been saying...PLS TAKE SOMETIME AND EFFORTS TO SEARCH ON THIS FORUM and u will need the desired.
FYI, one can use 2s/2i/mini/Jam/XDA II ...etc as a wireless Modem via USB/Serial/Bluetooth/Irda.
Pls also take efoorts to read the manual which is provided with...
Click to expand...
Click to collapse
Thank you my friend, but if you get my previous reply, I want to conneted to the internet using my mobile number by dialing up an ISP account and not GPRS as I HATE GPRS, it is unreasonably expensive.
Can you help on this. I have searched and searched and searched...
Hi there,
Follow the steps below.Kindly note that to access your ISP, your SIM card should have Data Services enabled from your service provider.Also, the dial up number should be PSTN Number....viz nos start from 1 cannot be dialed from a GSM Network.Check thiis with your Network service provider.
1.FIrst of all pair your device with your laptop BT, so that your laptop checks the services which your PDA offers viz Serialport,DUN., Activesync etc...
2.Now, go to Network connections on your Laptop and opt for make a new connection.Just take care that you should opt for Bluetooth Modem while selecting the Modem.Rest all is same as you had done for your ISP.
3.Now, just dial the connection...your phone shd be able to maka a data call.
Pls let me know if you were able to do so...Best Luck
hdubli said:
Hi there,
Follow the steps below.Kindly note that to access your ISP, your SIM card should have Data Services enabled from your service provider.Also, the dial up number should be PSTN Number....viz nos start from 1 cannot be dialed from a GSM Network.Check thiis with your Network service provider.
1.FIrst of all pair your device with your laptop BT, so that your laptop checks the services which your PDA offers viz Serialport,DUN., Activesync etc...
2.Now, go to Network connections on your Laptop and opt for make a new connection.Just take care that you should opt for Bluetooth Modem while selecting the Modem.Rest all is same as you had done for your ISP.
3.Now, just dial the connection...your phone shd be able to maka a data call.
Pls let me know if you were able to do so...Best Luck
Click to expand...
Click to collapse
Thank you hdubli, I will try it and let you.
How about direct dial up to ISP/PSTN from pda phone?
Can we do that?
Imagine, go anywhere only with pda phone.
Yes one can do that For doing so one has to select the "Cellular Line" while making a new connection on phone and input the dial up number provided by service provider..I suggest consult your service provider for doijg this
sherko said:
hdubli said:
As Forum Elders and experts have been saying...PLS TAKE SOMETIME AND EFFORTS TO SEARCH ON THIS FORUM and u will need the desired.
FYI, one can use 2s/2i/mini/Jam/XDA II ...etc as a wireless Modem via USB/Serial/Bluetooth/Irda.
Pls also take efoorts to read the manual which is provided with...
Click to expand...
Click to collapse
Thank you my friend, but if you get my previous reply, I want to conneted to the internet using my mobile number by dialing up an ISP account and not GPRS as I HATE GPRS, it is unreasonably expensive.
Click to expand...
Click to collapse
You can only get up to 9.6kbps dialing up to an ISP account (CSD service, typically USD$9.99/mo). With GPRS you can get at least 28.8kbps... That's why GPRS is more expensive (typically USD$19.99/mo)...
Now unless you plan to just browse gopher sites (gopher://quux.org/)... I don't think CSD is worth the trouble...
Can you help on this. I have searched and searched and searched...
Click to expand...
Click to collapse
GPRS is fine, but expensive in the UK. It is £2.35 per MB with an 02 monthly contract. Unless you get an 02 Pay As You Go SIM and 'bolt on' 02 Active5. It's £4 for 5mb.
If you use simple old fashioned dialup PSTN/ISDN you can use (for example) a free 0845 dialup (UK2.net) and use your bundled minutes instead.
OK it's slower, but I just want email headers and have over 800 minutes rolled over this month!!
Rich

GPRS Connection settings

XdaIIi - I can connect using wifi but I can not connect to GPRS. I either get a message teling me that I can not connect for unknown reasons or I get directed to the network logon screen where I'm asked for a password. I'm not sure what this passwrd should be as I dont recall ever having set one previously.
All thoughts & suggestions welcome
Pete

hermes(m3100) wifi problem - help please

i have a orange m3100 version of the hermes.
recently i flashed it with schaps 3.54b rom
now i can't use my wifi router/network @ home nor another wifi router/network @ work.
in fact i'm well connected, i'm sure of this because from another computer of the networks, i can ping the (static) ip of my hermes. i tried changing and changing again my ip and tested it.
but the hermes cant go on internet.
i use the right gateway and DNS in each case but no surf in pocket ie.
any solutions or other tests i can do?
in french if possible since i and my rom are in french.
thank you.
update : i made some tests :
it is nos a dns problem : i put the right gateway and dns on the smartphone but i cant get a website by typing its ip in pocket ie adress bar (other browsers dont work better) and i cant even access my router admin interface.
when i'm trying wifi with static ip or dhcp on my m3100, i can ping its ip from another computer of my networks and the smartphone responds ok, and i can see its mac adress in the connected clients on my router config screen. But the smartphone can't ping anyone.
i asked a friend who told me that the proxy (192.168.10.100 :8080 ) used for the connection to orangeworld in gprs/edge is also used when i try to connect via wifi and that is why it cant connect nowhere because my personal network is configured differently and without a proxy.
if i delete the proxy my connections will cost me more when i use gprs.
if i configure my router like this (192.168.10.xxx) with a proxy on 8080 it could work but only on my network and not @ my workplace or somewhere else where network params will be different.
any ideas or solutions ?
wow ! so many people trying to help :/
well i found a temporary solution to my problem, probably not the best one but the best i can do by myself so if someone wants to help : thank you
it was actually a proxy problem.
i looked in the registry and found a key where the proxy adress was detailed : 192.168.10.100:8080
i have exported this value as "proxon.reg"
then i modified the value by deleting its content and i exported the empty value as "proxoff.reg"
now i have my "proxy switch".
before activating the wifi and starting ie, i lauch "proxoff.reg" which clean the registry for the proxy data and magic : ie connects fine.
and when i want tu surf via my provider orange, i desactivate the wifi and launch "proxon.reg" which restore the correct proxy data to the registry. and i can surf on gprs/edge.
all this is fine when i switch off the phone functions in the comm manager.
but now i need someone to tell me how i can automatize this for the wifi and edge connections because if the wifi signal gets too weak, i dont want my phone to switch to the gsm when the proxy is desactivated.
i hope you can understand my english.
please help.
In the last version of BatteryStatus (http://forum.xda-developers.com/showthread.php?t=270751) you can find,among the others stuffs, the "Disable Proxy for WiFi" option (see the Tools tab)... Maybe more simple than "regg-in" on and off? I'm ok with it, try and see if it's ok for you also...
Bye!
hey kamaal i just downloaded the batterstatus program but im not seeing the "Disable Proxy for WiFi" option in the Tools tab
***edit:
sorry i downloaded the extended version beta and it was there

How to enable Internet Sharing for the TP2

First things first, you must install ICSinstall.cab, which can be found here:
http://forum.xda-developers.com/showpost.php?p=1949360&postcount=644
Then, you just launch Internet Sharing from the all programs menu, and two entries will appear. The first will be PC Connection, and the second Network Connection.
If installed correctly, ICS will allow you to select USB for the PC Connection (WMWifiRouter or a similar tool will allow a WiFi connection to be made).
Network connection shows None. Any ideas on how to make this show the service provider cellular connection (ie TELUS)
The following has been tried so far and failed:
created an entry under My Work Network under Connections with #777 as the dial number, and a blank username and password
created the following value in the registry: \HKEY_LOCAL_MACHINE\Comm\InternetSharing\Settings\ForceCellConnection and made it equal to both "TELUS" and "CDMA1X"
I also want to know what .dlls should be removed, if any, to protect the fact that ICS is being used from external parties.
Finally figured out that I needed to just install this program:
http://forum.xda-developers.com/showthread.php?t=538874
Works great with the TELUS TP2 - my Thinkpad's Access Connection utility was preventing access to the internet once connected to the adhoc utility, so I uninstalled that, and all works!
Tested on Telus TP2 works great. Thanks for the help..
Telus Charges
Doesn't Telus charge extremely large amounts of money for using your data connection like that?

Why Wireless Show Connected, But Is Still Useless?!

Hi, dears!
Q: why I can not use my wireless networks?!
I have two type of wireless network.
I can use both of this networks in my laptop, but I am confused and tired of retrying more and again and again in pocket pc.
===========================
First network is in our faculty:
1- Proxy Server (that will be set in pc in: InternetExplorer/Tools/InternetOptions/Connection/LanSetting/)
Address:192.168.12.20 Port:8080
2- And not any more setting is required in this network!
-----------------------------------
Second, in our dormitory:
1- Proxy Server (that will be set in pc in: InternetExplorer/Tools/InternetOptions/Connection/LanSetting/)
Address:192.168.0.1 Port:8080
2- In this network anyone has an specific IP for Wireless
Mine is:
IP: 192.168.0.188
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.188
(You maybe know it better than me that this configuration must be set in wireless properties in PC)
3- This network also use user-password that when I open opera or InternetExplorer (In PC), it will ask me for them:
suppose it is: user: 1111 and password: 2222
----------------------------------
In PC, I use both of this networks successfully.
Also I can connect both of them in ppc, (PPC show me "connected"!)
BUT! I cant not use this "connected" network in IE or Opera in PPC, Why?
I am really confused and tired.
----------------------------------
Now, who know what I must do?
Help Me, Just Step By Step!
Becuase I am a simple user of WM, not proffesional!
Extra Information:
Artemis P3300.
WM 6.1 Build 20771.1.4.6
I don't know what kind of more info is needed for describong device situation!
1. Setings-Conections-Conections-Advanced-Select Networks from My ISP changed it to My Work Network, select Edit button Proxy Setings to go and check on This network conects to the Internet button and then OK.
2. In Wifi settings on the card again in Conections (the icon is Wifi) Network Adapters to select The Internet. Ok. Wifi-and restarts it.
Good luck.
Dear, SPGI!
First thank you for answering.
Altought I did many test on this ways before, but I removed all old configurations first, and then I did your advice, but not worked!
I am often (and now) in Dormitory. In dormitory wireless network when I try to load any site IE shows this error: " The page connot be found. Check the name and try again", What is the matter? (In PC in this moment IE must show user-pass window!)
I saw some problem in wireless in this pags that their text was very onfusing for me!
http://forum.xda-developers.com/showthread.php?t=567110
http://forum.xda-developers.com/showthread.php?t=568878
Can I ask, those phone are same as mine? or they have another problem. becuase (I said) I can connect wireless, (altought it is useless yet) but it seems they can not turn their wireless or semi-problems.
-----
Everyone I restart my phone, it shows a message that had not set any data connection, why?
In Setting/Connection/Connection/Manage existing connections/Proxy Setting/Advanced/HTTP/
(I set dormitory wireless network server as 192.168.0.1 and port as 8080 there.)
There are username and passoword also that I think it must be instead of user-pass login that IE in PC will show when I Open IE. But I don not know what is the domain?
Then, If user-pass must be set here, what is the domain?
And if not: where it must be set?
Also, I found this In Setting/Connection/WiFi/Network Adapter/SDIO WLAN Wireless Adapter:
IP and Subnet mask and Default gateway.

Categories

Resources