Related
my xda 2 is pissing me off now im hardly able to charge it anymore as i have to bend the charger in the connector to get it to charge and keep it like it.
im needing just the connector from the bottom from either a xda 1 or 2 as they areboth the same by the looks of it.
either a smashed screen xda1 will do or just a xda1 or xda2 barred/knackered board will do fine aslong as the connector is great cond
anyone help me out here?
cheers
gaz
Ive got the same problem - but its still under guarantee and back at O2 for repair now - try taking yours back.
Maybe the start of a common fault?
mine was brought second hand mate no receipts or nothing dont think theyll repair it? not even got a box or cradel all i got was stylus, charger and phone itself
Gazz, it doesnt matter if you dont have a receipt, just ring this number 08081003427, they will want the imei number and will then send a packet for you to return the phone for repair.
is that all? hmmm looks like ill be ringing them on monday
btw i have imate software installed on the device and the warrenty sticker is non existant :\ as its been brocken to open the xda2 will they take it still? :?:
Hi mate,
had the same problem, mine is under warranty, but they still wanted 180+ to repair (connector and mainboard). I told them to return unrepaired. I have now got a spare battery (35 from expansys), which I charge in the cradle. I just swap batteries instead of charging, and synch using Bluetooth.
um feckers its working fine syncing but i just tried my car charger on it and that works fine?!?! :?: this is confusing lol ill just charge it up via car all the while lol
cheers for the info peeps but if anyone still has the connector/brocken pbc ill buy it from them cheers
gaz
This IS a COMMON fault.. two of my friends had this problem... me too.. i dropped my i-mate and i damaged the connector but thanks God it only got slided to the front and i could push it and get it back to its original position and it worked 100%..
but my friend couldnt make it so he sent it to Carrier Devices main centre in Dubai and they fixed it for about 35$..
it's really strange that O2 wants 180..
anyways this is a common fault and all xdaII users should watch out when the put or take their devices from the cradle..
I have a similar problem on one charger but the xda charges fine on the other charger so it could also be a problem with the plug rather then the xda socket.
just opened up my XDA 2 to have another look and one side of the connector is like bent upwards and cracked 3 legs of its solders.... i got some plyers out and tried pulling the mettal outer bit down and it ripped straight off lol, i resoldered the legs back into place all works fine except the connectors havent got nothing to clip into and its very fragile now.
also wanted is brocken IPAQ 38XX, 39XX, HP's they all have the same connectors on anyone help me out here?
i took my dads ipaq 3870 to bits and its exactly the same conector im gonna desolder the connector off a brocken ipaq if i can get hold of one then put it into my XDA 2 that will sort it good and propper
so anyone got any brocken Ipaq 38XX and up or XDA2 pbc or xda 1 pbc?
cheers
This could be your lucky day!
I have a duffed up XDA here!.
Duffed up coz I broke the screen.
The rest of it is as good as new. Cross my palm with silver and the world is your oyster.
I've run out of stupid sayings now.................but I do have an XDA for you! I bought a used replacement rather than sending it to PDAsmart.com for repair. PDAsmart want $199 plus the postage to replace the LCD. In real money thats over £130. The replacement cost £110. Maths was never my strong point, but where the heck do they get of charging that amount for and LCD?
Let me know if you want the old XDA
how much u asking for the PBC mate? is the connector undamaged?
lmk a price mate and ill see
XDA I for sale.
I've got an old XDA I that's fine but stuck in in-car mode so it keeps discharging the battery, otherwise it works perfectly fine). You can have the lot if the price is right, might as well send you all the box and everything else too if you want it.
give me an email and you can have it, [email protected].
im alrite now mate i got one from ebay
I know that this is not a selling forum, but I've had a lot of help over quite a long time from this site so would like to help out fellow members if I can. If this is not acceptable to the moderators I'm sorry, but here goes:
I've got an XDA2 that has been dropped. The screen is fine, but it's permanently locked into "Calendar" mode and cycles through all the calendar views and options. In all other ways it is in very good condition. It receives and makes calls, and all the functions are available, but I can't always turn it off. It's boxed and complete with cradle, charger, earphones, case, software, manuals, etc., and I'm sure that someone with a bit more time than me could make use of it. It's not stolen, or from any other dubious source - I've upgraded and just don't have the time at the moment - I wish I did, but that's the way it goes.
hi mate
how much would you like for your faulty xda unit?
cheers
chris
xda2 for sale
do you still have the xda2 for sale? if so how much do you want for it?
thank you
chris
I'm sorry but it was sold before Christmas. You might try "Wanted" on eBay.
I also have an XDA 2 for sale.it's in fully working order apart from the charge / sync connecter has come out.I still have the connecter maybe a bit of soldering could fix it?If not I have a link to a company that do repairs a lot cheaper than the xda service centre.Any offers?
I've used three SX66 vairiants of the Blue Angle and all of them have Crappy Bluetooth reception. You have to have the phone is your shirt pocket on the side where the headset is.
I know its not the headset as we have tried 4 headsets and they all work great with other Bluetooth phones. I can answer my Nokia phone from 2 offices down the hall with my Logitech Traveler. On my SX66 I cant answer it from my Cargo Pants Pocket with out getting masive static.
All the SX66s I've used are the BT v 3900...
Any Suggestions?
Same Friggin' problem
I have been up all night searching for an answer to this as I thought it was perhaps a problem related to upgrading. Then I remembered it was doing it before I upgraded. I wonder if it has anything to do with radio version, etc.
I would really, REALLY hate to go back to using the default earplugs that tangle if you think too hard.
Come on guys, is there a BT reception fix I'm overlooking? I was in a conference call yesterday from home and it sounded like someone was balling up candy wrappers in the phone on my end and the other's until I had to disable the headset and continue with the XDA IIs to my ear. :evil:
no bluetooth fix sorry.
radio has nothing to do with bluetooth
Reception really suck.....hope someone here can help....
I've been looking at this issue as well.
Per the nekkid blue angel pictures from the wiki, the bluetooth antenna looks to be a tiny chip looking thing...
Has anyone considered (or even did) replacing it with something a bit more substantial?
The wifi antenna is kind of small as well. GSM antenna looks OK.
try I Tech Clip II mini.
this is what I have been using for the past 4 months and has been great.
I have tried different types of Jabra BT, Mobile traveller.. none has worked and waste of money.
until i find this one... works great.
jdc said:
Per the nekkid blue angel pictures from the wiki, the bluetooth antenna looks to be a tiny chip looking thing...
Click to expand...
Click to collapse
Hi Jdc,
I cant find the pic you are talking about, if you could give me a pointer to where the bluetooth antenna is I see if I can come up with anything.
nuttja said:
Hi Jdc,
I cant find the pic you are talking about, if you could give me a pointer to where the bluetooth antenna is I see if I can come up with anything.
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=BA_Technical
and
http://wiki.xda-developers.com/index.php?pagename=BlueangelNakedPictures
I can't find the page that lists which one is which now (naturally once I'm looking for it, it hides), but IIRC the wifi antenna is that small clipish looking thing at D-20, the bluish one at H-20 is the bluetooth, and the big green thing at the top of the board (letters C-K, numbers 1-6) is the GSM antenna.
Looking closer at the board, it would almost appear that there is an external antenna hookup as well for the wifi?
If I didn't have a cracked screen, I'd take mine apart to find out. I'm worried that if I did, the screen would totally stop working. :-(
That seems a bad location for the BT aerial to me with the charge socket at the back and all that shielding above.
I read an article about moding a usb dongle :
http://www.pentest.co.uk/documents/bt_dongle_mod/bt_dongle_mod.html
I’m thinking maybe we could try something similar on the Blue Angel but with an internal aerial in a better location, a bit like these ones on ebay:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200142840418
what do you all think?
nuttja said:
That seems a bad location for the BT aerial to me with the charge socket at the back and all that shielding above.
I read an article about moding a usb dongle :
http://www.pentest.co.uk/documents/bt_dongle_mod/bt_dongle_mod.html
I’m thinking maybe we could try something similar on the Blue Angel but with an internal aerial in a better location, a bit like these ones on ebay:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200142840418
what do you all think?
Click to expand...
Click to collapse
Agreed, it is a bad location. Especially if one considers that often, one holds the unit in hand at that location, covering up the antennas.
Assuming that is the bluetooth antenna (I'm fairly sure it is, considering that is looks similar to the one in the dongle you linked to), I would think that it would be better to use one of those wifi antennas in the ebay link (or something similar) and try to keep everything internal to the phone. Since bluetooth does run on the same frequency as wifi, in theory, it should work.
No one wants to use a phone with a bunch of wires hanging off of it, otherwise why would we be complaining about the bluetooth range?
Now, if that other connector looking part is the wifi, the battery normally covers it. Unless there is a way to extend that to another user added jack, the same idea(s) for the bluetooth would apply.
I do not know how tight the clearances are inside the angle, as I've never opened mine. one would think that there might be a way to run the antenna wire on the inside of the back, or along the sides of the plastics. Perhaps around the GSM antenna area? Or would that cause too much interference to the phone/bt/wifi?
smtownsend said:
I've used three SX66 vairiants of the Blue Angle and all of them have Crappy Bluetooth reception. You have to have the phone is your shirt pocket on the side where the headset is.
I know its not the headset as we have tried 4 headsets and they all work great with other Bluetooth phones. I can answer my Nokia phone from 2 offices down the hall with my Logitech Traveler. On my SX66 I cant answer it from my Cargo Pants Pocket with out getting masive static.
All the SX66s I've used are the BT v 3900...
Any Suggestions?
Click to expand...
Click to collapse
Love the read about this, but there was quite a discussion about this problem when the BA was released. I argued it with orange for pretty much the entire length of my contract, it was a faulty bluetooth driver. and surprisingly enough O2 and t-mobile got it right with their XDAIIs and the MDA III firmware's but Orange didn't get it right till almost about a year or more later. needless to say it started working after i pugraded the firmware later on. since then i'm now runnign t-mobiles firmware on it with the o2 active program ( hahaha yea best of both ) and it's been fine for me. So look into upgrading to any of the offical roms from whatever network your looking for, if' you've already unlocked the phone, great as should remain unlocked, if doesn't just re-run the unlocker
cyberjak said:
surprisingly enough O2 and t-mobile got it right with their XDAIIs and the MDA III firmware's but Orange didn't get it right till almost about a year or more later.
So look into upgrading to any of the offical roms from whatever network your looking for
Click to expand...
Click to collapse
Mine is an XDA iis form O2 with the last offical O2 firmware wm2003 1.40.242 WWE on, I`ve also tried T-mobiles 1.42 and upgraded the radio to 1.15 but bluetooth still sucks with a headset!
Maybe you got lucky or maybe its the headset you are using.
Bluetooth reception
Has anyone got an update on this subject since Aug 07?
I have the SX-66 version (Cingular/AT&T)
I have had this phone Since the middle of 2006.
I have upgraded to what I believe is the most up to date programming mods that are available: (other than WM5/6, of which I have planned to do in the near future, I have tons of software and utilities that only run in 2003 edition and I would have to reacquire.)
BA---PH20B1
WM2003 2nd edition
Ver. 1.42.00 WWE
Build date: 09/05/05
Radio Ver.: 1.15.00
Protocol: 1337.45
ExtROM: 1.40.125 WWE
BT- PPC/PE Ver.: 1.0.0.3900
The thing about Modding the chip or placing an antennae jack IS that, all of which that is exposed, in the naked pics of the Blue Angel, are all in fact, canned and can be difficult to expose, to do any modding, without micro precision equipment and a steady hand. I have accomplished modding regular cell phones this way, however, this device is a bit more at risk and can get expensive and messy. I have a few boards, I have acquired through buying spare parts for mine in the case of accidents, of which I have performed with ALL the help of these forums. I will work on this, at this point IF you folks do not have any other alternatives, outside hanging pointless wires hanging around (me thinks that is WHY the bluetooth and wireless technologies were implemented?) With any success, I will report, outside failure, with some sort of procedure and details, that maybe someone with a bit more knowledge and expertise can modify to a possible easier closure on this REAL problem. Sure there are maybe better devices that can, maybe measure up to this Blue Angel, but I love my Angel, even with the flaws!
It has been a great challenge and all of the possibilities that XDA development has brought to the table.
In the last 2 years I have had this phone this is my FIRST posting.
The Bluetooth has been my ONLY real problem. I have to carry it in my shirt pocket using a BT headset and it is still really bad at that. I have used some of the best headsets and gone to great expense, to try and alleviate what I thought, by chance, that I could have finally found one that would superceid
the problem, however, to no avail, I still have the same problem.
If by chance that I could actually find a bigger chip, I think I would have to have the right drivers for it and will have to lead a command string, I am guessing through going to the kitchen and cooking up some ExtROM for the 'moddapplication'?
Blackberry has, I think, one of the strongest chips available. I have a 7100t that i could answer from 300 ft of a house with walls. My 650 isn't that good.
I apologize for being long winded, I suppose I am catching up from not communicating in the past, but I followed the rules of this site, and I haven't needed to ask a question and not needed to help someone else, because you guys have had the answers in these forums. Without further a'due........
Finally, if you have any FRESH ideas or direction on this bluetooth delima, outside using a can opener, .........***please***, let me know............
Best regards,
gcopher
http://www.michellebrown-and-mmd.com
Hello
I am new on this forum, sorry if this type of question has alreday been answered.
I've got a UNIVERSAL/ SPV M500 and the Coaxial Cable (linking the screen and the keyboard) has been twisted and is damaged.
Where can I find/buy a spare part to replace it ? the reference number is 73H00233-01M (Coaxial Cable Pre-assembly) as indicated in the service manual.
Thank for your help.
Hey,
If you find it let me know, I need one two. Actually these are two cables the Coaxial (Display) and Coaxial (Functional). My screen goes white in landscape mode and I confirmed it's the cable by disassembling my machine. However was unable to find that cable Will let you know if I find it.
Me too.
I am getting odd touch screen errors and think it can only be the cable.
If anyone knows of a supplier, please post here.
Has anyone tried contacting HTC directly?
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
villard said:
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
Click to expand...
Click to collapse
Thanks,
Please do let me know, I really need that cable.
MOBILER
Finally ... got cables !
Here mate ... take this adress
http://qinyieproduct.diytrade.com/sdp/444314/4/pd-2468984/2411741-0.html
villard said:
Hello
I am new on this forum, sorry if this type of question has alreday been answered.
I've got a UNIVERSAL/ SPV M500 and the Coaxial Cable (linking the screen and the keyboard) has been twisted and is damaged.
Where can I find/buy a spare part to replace it ? the reference number is 73H00233-01M (Coaxial Cable Pre-assembly) as indicated in the service manual.
Thank for your help.
Click to expand...
Click to collapse
found coaxial cable for £60 plus vat.
villard said:
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
Click to expand...
Click to collapse
Give this site a look, http://www.apexlaptops.co.uk/Universal.htm
I have been having the same problems as you guys. my uni have been getting "white screen of death" for about 6 months now.
I am going to take out the cable and try and fix it myself. (fingers crossed)
I will let you all know how it goes. I felt £60 plus vat and postage was a bit steep.
coax cable
Fixed it!!
I took apart my uni down to the last screw, and rebuilt it.
In the process I did find that i am missing an antenna in the back, it should have 3 but only has 2. oh well it works.
The 3rd antenna is for 3g and i am not on 3.
Anyway back to my uni.
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
If this works for longer than a month then i will solder the cable down.
Touch wood it seems to be working. I will try and get some photos done tonight
gingerchristopher.
Hi,
Congratulations!
What tools did you use for this job(srews, tweezers)?
gingerchristopher said:
Fixed it!!
I took apart my uni down to the last screw, and rebuilt it.
In the process I did find that i am missing an antenna in the back, it should have 3 but only has 2. oh well it works.
The 3rd antenna is for 3g and i am not on 3.
Anyway back to my uni.
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
If this works for longer than a month then i will solder the cable down.
Touch wood it seems to be working. I will try and get some photos done tonight
gingerchristopher.
Click to expand...
Click to collapse
re: fixed it
Yes just a torex screwdriver size 6 to take out the 4 security screws in the battery tray, watch makers screwdrivers and a pair of fine point tweezers.
still having problems with my camera so photos will follow when i take it apart to solder.
ang how about antistatic gloves?
gingerchristopher said:
Yes just a torex screwdriver size 6 to take out the 4 security screws in the battery tray, watch makers screwdrivers and a pair of fine point tweezers.
still having problems with my camera so photos will follow when i take it apart to solder.
Click to expand...
Click to collapse
Anti Static gloves!!
Because of the Job I do, I have an earthing band to connect the phone and me to the wall, and put the phone on an anti static table cover. All is good so far. I am looking at Feb to solder (as i have some leave in). There will be detailed photos and description.
Untill then........
Just found a coax on e-bay
Hi I hope anyone who is after this coax cable can read this before the weekend is out, as there is one on e-bay for £40 this is the link.
http://cgi.ebay.co.uk/NEW-O2-XDA-EX...9QQihZ020QQcategoryZ41343QQrdZ1QQcmdZViewItem
Chris.
Good done man go ahaed, and plz try to post the photos.
Another question, my universal some times lost its external speaker sound, so i cannot hear the rings, when i press on the back of the device, exactly on the battery cover in the middle between the two dummy holes and the usb port, it works again. Do u think that this is due to the coaxial damage also, even i don'y have any problem in the screen??
hbahaie said:
Good done man go ahaed, and plz try to post the photos.
Another question, my universal some times lost its external speaker sound, so i cannot hear the rings, when i press on the back of the device, exactly on the battery cover in the middle between the two dummy holes and the usb port, it works again. Do u think that this is due to the coaxial damage also, even i don'y have any problem in the screen??
Click to expand...
Click to collapse
nope. open up and check the contacts
omega_ said:
nope. open up and check the contacts
Click to expand...
Click to collapse
Thank you very much for your advice, I'll check. Thanks
hbahaie said:
Thank you very much for your advice, I'll check. Thanks
Click to expand...
Click to collapse
I have disassembled my uni and checked for all connections, but there was no improvement. I can confirm that the disappearance of external speakers sound is not due to co-axial cable. The proof is that i extracted my main borad from my uni and implanted it in another one, i assumed that the problem will be rsolved, but the same problem still exists. Ok, now i can disassemble my uni for smallest piece, but any one advise me where is th connection part or the piece that causes that problem. Again a brief description of the problem:
when there is a coming call, i cannot here the ring or it is sevrely intermitent, also when i play any WMP file, i cannot here the sound, if I press firmly on the base or around the keyboard the sound comes again and may last for a few minutes or disappear after another press. So, there is a lose part in the main board i think that needs fixation, but which one????
Hi all
Now it takes me more than a month to upgrade my JASJAR due to a lot of problems I faced during this upgrading adventure… anyway, the last problem I still have is that after upgrading the screen goes crazy, I mean if you press on the screen the colours are mixed for few seconds and then its ok but at any time I touch the screen again the same happened so you can imagine what if I am going to dial a number or write a message …. So can anyone advice me what to do? …
The rom version is 1.13.82
Radio 1.04.02
Extrom 1.13.188
And I think the bootloader 1.00 and I don’t know why I feel that the bootloader is the reason ... I made a deep search but I couldn’t find problem like mine
gingerchristopher said:
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
Click to expand...
Click to collapse
Sitting next to my M5000 and all of a sudden the screen turned on but was white!
Following your lead I found that the first i.e. 'underneath' connector was not fully home. A little push and all is well.
Took the time to pack out the housing for the stylus to stop the little blighter escaping whilst in there.
Thank you for taking the time to post gingerchristopher.
Pete
I am looking for a working HTC universal's main board 99HAU0XX-02.
I am as well. Please post here if you have a spare available...
me too...even if the miniusb is broken.
Just thought i'd bump this up cos i'm looking for one now. As cheap as poss (free)
I got one with a broken screen only...offers?
ok, i'll let you know some time next week
I got an functionable MDA PRO,
if anybody is interested, please make an offer.
Cya
MB
I have no idea how much a motherboard would cost - fire a price and if it makes sense for me, I'm interested as my headphone jack is gone and I can't find it on its own.
Nice little store
If you would like to replace your main board there is a store by my house that has every peice that you need to build a new one. I live in taiwan. The parts range from $1.00-10.00. So, if you are in need of a special part let me know, maybe I can help.
Hi Cobb,
That would be great - I'm really looking for a headphone jack port as mine's gone and I had to eliminate it as the Uni was under the impression I had headphones connected at all time.
If you can check the price of this out, it would be cool.
Tks.
Sure
JZEE said:
Hi Cobb,
That would be great - I'm really looking for a headphone jack port as mine's gone and I had to eliminate it as the Uni was under the impression I had headphones connected at all time.
If you can check the price of this out, it would be cool.
Tks.
Click to expand...
Click to collapse
It is around $1.00-2.00 US. Just to let you know I used the female headphone connection from my Walkman. I will try to post a complete price list for the universal.
The parts are really cheap here, but sending them is not. Does anyone have any ideas how I could send replacement parts, and keep the price reasonable.
Any part that you want to replace should be less than $5.00 with exception to the screen, and the external housing.
For those of you with a broken USB female jack. While replacing mine I noticed that USB's are pretty standard. There seems to be two common types, I used the one from a 4port usb hub. I not had any problems yet.
I hope this helps. The prices I listed are for a single piece.
I have a full unit, everything is fine except for a usb connector that is FUBAR, Looking to get rid of the entire unit so I can buy a new one, shoot me a PM if anyone would like to purchase it or are selling a working unit.
cobb78 said:
It is around $1.00-2.00 US. Just to let you know I used the female headphone connection from my Walkman. I will try to post a complete price list for the universal.
The parts are really cheap here, but sending them is not. Does anyone have any ideas how I could send replacement parts, and keep the price reasonable.
Any part that you want to replace should be less than $5.00 with exception to the screen, and the external housing.
For those of you with a broken USB female jack. While replacing mine I noticed that USB's are pretty standard. There seems to be two common types, I used the one from a 4port usb hub. I not had any problems yet.
I hope this helps. The prices I listed are for a single piece.
Click to expand...
Click to collapse
Hi Cobb, how about that price list??? Just my guess, if parts are SO cheap, no transportation can be expensive!!! LOL
Anyways, what I´m looking for, is a new MoBo, you have any prices for them???
Thanks in advance, and congrats to all knowledged and not so knowledged ppl in this forum.
Willy
User665 said:
I have a full unit, everything is fine except for a usb connector that is FUBAR, Looking to get rid of the entire unit so I can buy a new one, shoot me a PM if anyone would like to purchase it or are selling a working unit.
Click to expand...
Click to collapse
User665, in what "cosmetic" and use state is the machine?? If you are "reasonable" I could be interested... Let me know things.
Willy
bump
Hi, I am bumping this thread as I am in need of the mainboard now. Any help would be greatly appreciated.
Hi,
I'm searching a motherboard too, if it's 128 Mb ugraded it's better for me, or if someone has a 128 Mb uni full working or with a broken LCD... please let me know.
I've made a new thread on the marketplace section too, you can write there or send me a PM. This is the link:
http://forum.xda-developers.com/showthread.php?t=532553
i have a htc universal mobo with a broken mini usb connector, it cant be repaired, some of the copper pads are missing, but the mobo still works fine
i have a G3 universal (imate jasjar) motherboard with damaged phone in and damaged screen. if someone want this let me know and make a offer. motherboard functions are ok..i see the content of the smartphon if i connect it to pc with usb cable.
i'm italian.