:shock:
The connector for active-sync of the XDA is very badly constructed.
Until I got my new XDA2, I had a XDA1. I had it exchanged (warranty) against the XDA2
after some discussion with o2 about bad quality ot the xda1 (I had it 3 times repaired, but it broke soon again. Last problem: the connector for syncing broke 3 days after I got the replacement xda.)
The problem seems to be the smal plastic lid that holds the contacts:
While the plug resting on the plastic lid and the metal frame not supporting the plug suffiiciently because of a quite big gap between them, the lid could easily break if force
is applied up- or downward.
This way my last replacement XDA1 deterioated.
(Un-)Fortunately, the active-sync+charge cable (non O2-accessory) I had for XDA1 my seems to be pin compatible (syncing works).
So the plug is the same, and one should be VERY careful with it.
->Also the original charging adapter is constructed in a way to send bending forces to
the small plastic lid of the inner connector (good to know for warranty discussions).
I actually think of a plug-adaptor, that interfaces between the original plug and the outer
world. It cold be supported via a steelframe that one integrates into the original wallet.
Ideas are welcome!
Summary for the lazy:
---------------
! The Active-Sync-Plug is *badly* constructed.
- The inner plastic lid holding the connectors BREAKS easily.
---------------------------------------
!! So beware of cables attached to the sync connector. !!
---------------------------------------
Use only the craddle that applies forces only to the case of the XDA
:!:
May I add on top of this ... it happened to me and the USB connector is broken. The bad news is: there is NO way yo fix it and as it's integrated with the main board (the power pin) the only option is to replace the main board :x :evil:
Guys, be more than just careful with your devices on that point.
Biso007 said:
May I add on top of this ... it happened to me and the USB connector is broken. The bad news is: there is NO way yo fix it and as it's integrated with the main board (the power pin) the only option is to replace the main board :x :evil:
Guys, be more than just careful with your devices on that point.
Click to expand...
Click to collapse
This is not necessarily true. We have the sync and audiojack connectors in stock and can replace them. They are a pain, but doable.
May be you are right, but it's the case with my device. They said the connection point with the power track (pin) is lost, so the main board has to be replaced. Or maybe they are not equipped the same way you have at USA, and the shipping cost makes it more expensive
In Australia the O2 service Centre will charge you for a compleate replacment main board, they say they can't fix the connector and because the phone was out of warranty they simply charge for a compleatly new board :x SHARKS!
XDA Connector repairs avaliable here
Hi Guys,
I used a company in the UK to repair by busted XDA 2. The damn connector fell out when using an aftermarket in car charger. Got his company to repair it. Were pretty good. their web site adress is www.apexlaptops.co.uk
I was pleased wit the service. Hope they can help you like they helped me!
Good luck guys.
Pocket PC Techs ROCK
I had my unit connected to a cable and landed on the floor - connector first. OUCH. The female connector on the bottom of the unit was loose - and the unit became useless (connections no longer worked). I sent it to Pocket PC Techs, and they fixed and returned it all within a week, and for a very reasonable fee as well. Try them. It'll probably work. Just be gentle with it when it's plugged in.
p n
Re: SYNC CONNECTOR REPAIRS
brentwebster said:
Hi guys. Just to let you all know that i do repairs on sync connectors if anyone has got a broken one. The repairs are done same day sevice, so the day i recieve the phone i repair it and send it back out to you the same day. Th cost of this repair is £40-00. My contact detials are [email protected]. Email me for further details
Click to expand...
Click to collapse
Hi Guys, just to let you know that brentwebster has used the picture from my auction and I sell the connectors for £10 on ebay, if you are fairly good with a soldering iron you can do it yourself - I'll give a discount and free postage in the UK to members of XDA-developers who mail me before buying for details
Richard / fluffcat1
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=9707299579
o p
Re: SYNC CONNECTOR REPAIRS
brentwebster said:
I can supply these connectors at £8 to anyone that wants them. :wink:
Click to expand...
Click to collapse
PM me for a better price :twisted:
Richard
Re: SYNC CONNECTOR REPAIRS
Another person offering this service to those who can't do it themselves:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=9704914642
£39.99 plus return postage, paypal accepted, 647 feedback rating ( 1000 under mne but there we go ) , no affiliation blah blah blah. Maybe brentwebster can start a price war with them as well?....
Richard
Broken SYNC Connector on my XDA IIi
Can anyone repair this????
If they can please email me with details (address, cost etc)
My email is [email protected]
Thankx
I have one with the connector completely off. Rather soldering a new one on, I was thinking of hard wiring a usb lead on, to fit my arkon gps receiver. Does anyone know the pin outs. I only need data in/out, ground and vcc
i have this problem right. one of the screws on the left hand side of the xda has come out. I dont know when and how, but its gone. theres something rattling inside as well. maybe the screw itself.
anyone have any idea where I can get the screw? im 11 months into the contract so i dont think o2 will help much, if they do, they might charge me silly prices.
Anyone know where i can get this fixed?
oh yeah... some ****er stole my GPS receiver from my car. I need to get a new one.
i had the globalsat BT338 sirfstar III. Whats the best out right now that wont cost an arm and a leg.
Any help would be much apreciated.
Gracias.
For the screws, give HTC a call on 08712230217 and they are usually quite good at sending out a couple to you direct. You will, however, need a TORX #6 driver to put it in (Maplin can provide).
On the GPS cradle the Holux CR-100 is fairly cheap on Ebay.
Try this link (screws etc. for sale)
http://www.pocketpctechs.com/main~unit~Siemens_SX-66-293~area~repairs-kits~item~XDA-SCRWKIT03.htm
hi guy's, i have been up tring to change the cover on my mini and it seems i have broken the end off the ribbon cable (dam it) is there anything i can do to repair it or is a new screen needed?? if so does anyone know where to get a cheap screen???
thanks in advance
i damaged my ribbon connector that's connected to the main board (the one with the clip lock) on my mini too
It sucks hey? the clip lock's all i need thats the thing that broke, the cable seems in good shape. any ideas??
no ideas. i asked our service center here but they dont sell spare parts. they said i have to buy the whole board. Now im looking for any MINI that's not working and maybe i can get it at a bargain price.
I think i might just by an atom unless you know of any other wicked phones comming out soon??
Hello
I am new on this forum, sorry if this type of question has alreday been answered.
I've got a UNIVERSAL/ SPV M500 and the Coaxial Cable (linking the screen and the keyboard) has been twisted and is damaged.
Where can I find/buy a spare part to replace it ? the reference number is 73H00233-01M (Coaxial Cable Pre-assembly) as indicated in the service manual.
Thank for your help.
Hey,
If you find it let me know, I need one two. Actually these are two cables the Coaxial (Display) and Coaxial (Functional). My screen goes white in landscape mode and I confirmed it's the cable by disassembling my machine. However was unable to find that cable Will let you know if I find it.
Me too.
I am getting odd touch screen errors and think it can only be the cable.
If anyone knows of a supplier, please post here.
Has anyone tried contacting HTC directly?
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
villard said:
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
Click to expand...
Click to collapse
Thanks,
Please do let me know, I really need that cable.
MOBILER
Finally ... got cables !
Here mate ... take this adress
http://qinyieproduct.diytrade.com/sdp/444314/4/pd-2468984/2411741-0.html
villard said:
Hello
I am new on this forum, sorry if this type of question has alreday been answered.
I've got a UNIVERSAL/ SPV M500 and the Coaxial Cable (linking the screen and the keyboard) has been twisted and is damaged.
Where can I find/buy a spare part to replace it ? the reference number is 73H00233-01M (Coaxial Cable Pre-assembly) as indicated in the service manual.
Thank for your help.
Click to expand...
Click to collapse
found coaxial cable for £60 plus vat.
villard said:
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
Click to expand...
Click to collapse
Give this site a look, http://www.apexlaptops.co.uk/Universal.htm
I have been having the same problems as you guys. my uni have been getting "white screen of death" for about 6 months now.
I am going to take out the cable and try and fix it myself. (fingers crossed)
I will let you all know how it goes. I felt £60 plus vat and postage was a bit steep.
coax cable
Fixed it!!
I took apart my uni down to the last screw, and rebuilt it.
In the process I did find that i am missing an antenna in the back, it should have 3 but only has 2. oh well it works.
The 3rd antenna is for 3g and i am not on 3.
Anyway back to my uni.
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
If this works for longer than a month then i will solder the cable down.
Touch wood it seems to be working. I will try and get some photos done tonight
gingerchristopher.
Hi,
Congratulations!
What tools did you use for this job(srews, tweezers)?
gingerchristopher said:
Fixed it!!
I took apart my uni down to the last screw, and rebuilt it.
In the process I did find that i am missing an antenna in the back, it should have 3 but only has 2. oh well it works.
The 3rd antenna is for 3g and i am not on 3.
Anyway back to my uni.
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
If this works for longer than a month then i will solder the cable down.
Touch wood it seems to be working. I will try and get some photos done tonight
gingerchristopher.
Click to expand...
Click to collapse
re: fixed it
Yes just a torex screwdriver size 6 to take out the 4 security screws in the battery tray, watch makers screwdrivers and a pair of fine point tweezers.
still having problems with my camera so photos will follow when i take it apart to solder.
ang how about antistatic gloves?
gingerchristopher said:
Yes just a torex screwdriver size 6 to take out the 4 security screws in the battery tray, watch makers screwdrivers and a pair of fine point tweezers.
still having problems with my camera so photos will follow when i take it apart to solder.
Click to expand...
Click to collapse
Anti Static gloves!!
Because of the Job I do, I have an earthing band to connect the phone and me to the wall, and put the phone on an anti static table cover. All is good so far. I am looking at Feb to solder (as i have some leave in). There will be detailed photos and description.
Untill then........
Just found a coax on e-bay
Hi I hope anyone who is after this coax cable can read this before the weekend is out, as there is one on e-bay for £40 this is the link.
http://cgi.ebay.co.uk/NEW-O2-XDA-EX...9QQihZ020QQcategoryZ41343QQrdZ1QQcmdZViewItem
Chris.
Good done man go ahaed, and plz try to post the photos.
Another question, my universal some times lost its external speaker sound, so i cannot hear the rings, when i press on the back of the device, exactly on the battery cover in the middle between the two dummy holes and the usb port, it works again. Do u think that this is due to the coaxial damage also, even i don'y have any problem in the screen??
hbahaie said:
Good done man go ahaed, and plz try to post the photos.
Another question, my universal some times lost its external speaker sound, so i cannot hear the rings, when i press on the back of the device, exactly on the battery cover in the middle between the two dummy holes and the usb port, it works again. Do u think that this is due to the coaxial damage also, even i don'y have any problem in the screen??
Click to expand...
Click to collapse
nope. open up and check the contacts
omega_ said:
nope. open up and check the contacts
Click to expand...
Click to collapse
Thank you very much for your advice, I'll check. Thanks
hbahaie said:
Thank you very much for your advice, I'll check. Thanks
Click to expand...
Click to collapse
I have disassembled my uni and checked for all connections, but there was no improvement. I can confirm that the disappearance of external speakers sound is not due to co-axial cable. The proof is that i extracted my main borad from my uni and implanted it in another one, i assumed that the problem will be rsolved, but the same problem still exists. Ok, now i can disassemble my uni for smallest piece, but any one advise me where is th connection part or the piece that causes that problem. Again a brief description of the problem:
when there is a coming call, i cannot here the ring or it is sevrely intermitent, also when i play any WMP file, i cannot here the sound, if I press firmly on the base or around the keyboard the sound comes again and may last for a few minutes or disappear after another press. So, there is a lose part in the main board i think that needs fixation, but which one????
Hi all
Now it takes me more than a month to upgrade my JASJAR due to a lot of problems I faced during this upgrading adventure… anyway, the last problem I still have is that after upgrading the screen goes crazy, I mean if you press on the screen the colours are mixed for few seconds and then its ok but at any time I touch the screen again the same happened so you can imagine what if I am going to dial a number or write a message …. So can anyone advice me what to do? …
The rom version is 1.13.82
Radio 1.04.02
Extrom 1.13.188
And I think the bootloader 1.00 and I don’t know why I feel that the bootloader is the reason ... I made a deep search but I couldn’t find problem like mine
gingerchristopher said:
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
Click to expand...
Click to collapse
Sitting next to my M5000 and all of a sudden the screen turned on but was white!
Following your lead I found that the first i.e. 'underneath' connector was not fully home. A little push and all is well.
Took the time to pack out the housing for the stylus to stop the little blighter escaping whilst in there.
Thank you for taking the time to post gingerchristopher.
Pete
does any body know what the part on the main board is called i need to have it replaced but its on the motherboard of the phone its the part that connects the sdcard ribbon cable to the main board and it has the little whit lach gate on it to secure the pins, if any body knows pleas let me know kus the gate fell off of mine when i dropped it and i need to sodder on a whole new peice n no i dont have insurnce on the phone so sending it is is out the door..lol
i take it just taping it on wont help, never seen this for sale anywhere and soldering to these small boads is very difficult, ive had bad luck soldering @ this scale. i suggest buying a new motherboard or a broken phone with a good motherboard and swapping. unless you are a wiz at soldering and you are able to even find what you need this will be the cheapest fix
Sent from my HTC Vision using xda premium
yea kinda figured that much thanks for the help but i still whould like to know what the part is called teres a guy selling a board on ebay for 89 bucks and claims it works but the water indcater is red on it so no fillin to buy it plus i got a gooapple for right now to play with till then