Hello
I am new on this forum, sorry if this type of question has alreday been answered.
I've got a UNIVERSAL/ SPV M500 and the Coaxial Cable (linking the screen and the keyboard) has been twisted and is damaged.
Where can I find/buy a spare part to replace it ? the reference number is 73H00233-01M (Coaxial Cable Pre-assembly) as indicated in the service manual.
Thank for your help.
Hey,
If you find it let me know, I need one two. Actually these are two cables the Coaxial (Display) and Coaxial (Functional). My screen goes white in landscape mode and I confirmed it's the cable by disassembling my machine. However was unable to find that cable Will let you know if I find it.
Me too.
I am getting odd touch screen errors and think it can only be the cable.
If anyone knows of a supplier, please post here.
Has anyone tried contacting HTC directly?
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
villard said:
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
Click to expand...
Click to collapse
Thanks,
Please do let me know, I really need that cable.
MOBILER
Finally ... got cables !
Here mate ... take this adress
http://qinyieproduct.diytrade.com/sdp/444314/4/pd-2468984/2411741-0.html
villard said:
Hello
I am new on this forum, sorry if this type of question has alreday been answered.
I've got a UNIVERSAL/ SPV M500 and the Coaxial Cable (linking the screen and the keyboard) has been twisted and is damaged.
Where can I find/buy a spare part to replace it ? the reference number is 73H00233-01M (Coaxial Cable Pre-assembly) as indicated in the service manual.
Thank for your help.
Click to expand...
Click to collapse
found coaxial cable for £60 plus vat.
villard said:
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
Click to expand...
Click to collapse
Give this site a look, http://www.apexlaptops.co.uk/Universal.htm
I have been having the same problems as you guys. my uni have been getting "white screen of death" for about 6 months now.
I am going to take out the cable and try and fix it myself. (fingers crossed)
I will let you all know how it goes. I felt £60 plus vat and postage was a bit steep.
coax cable
Fixed it!!
I took apart my uni down to the last screw, and rebuilt it.
In the process I did find that i am missing an antenna in the back, it should have 3 but only has 2. oh well it works.
The 3rd antenna is for 3g and i am not on 3.
Anyway back to my uni.
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
If this works for longer than a month then i will solder the cable down.
Touch wood it seems to be working. I will try and get some photos done tonight
gingerchristopher.
Hi,
Congratulations!
What tools did you use for this job(srews, tweezers)?
gingerchristopher said:
Fixed it!!
I took apart my uni down to the last screw, and rebuilt it.
In the process I did find that i am missing an antenna in the back, it should have 3 but only has 2. oh well it works.
The 3rd antenna is for 3g and i am not on 3.
Anyway back to my uni.
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
If this works for longer than a month then i will solder the cable down.
Touch wood it seems to be working. I will try and get some photos done tonight
gingerchristopher.
Click to expand...
Click to collapse
re: fixed it
Yes just a torex screwdriver size 6 to take out the 4 security screws in the battery tray, watch makers screwdrivers and a pair of fine point tweezers.
still having problems with my camera so photos will follow when i take it apart to solder.
ang how about antistatic gloves?
gingerchristopher said:
Yes just a torex screwdriver size 6 to take out the 4 security screws in the battery tray, watch makers screwdrivers and a pair of fine point tweezers.
still having problems with my camera so photos will follow when i take it apart to solder.
Click to expand...
Click to collapse
Anti Static gloves!!
Because of the Job I do, I have an earthing band to connect the phone and me to the wall, and put the phone on an anti static table cover. All is good so far. I am looking at Feb to solder (as i have some leave in). There will be detailed photos and description.
Untill then........
Just found a coax on e-bay
Hi I hope anyone who is after this coax cable can read this before the weekend is out, as there is one on e-bay for £40 this is the link.
http://cgi.ebay.co.uk/NEW-O2-XDA-EX...9QQihZ020QQcategoryZ41343QQrdZ1QQcmdZViewItem
Chris.
Good done man go ahaed, and plz try to post the photos.
Another question, my universal some times lost its external speaker sound, so i cannot hear the rings, when i press on the back of the device, exactly on the battery cover in the middle between the two dummy holes and the usb port, it works again. Do u think that this is due to the coaxial damage also, even i don'y have any problem in the screen??
hbahaie said:
Good done man go ahaed, and plz try to post the photos.
Another question, my universal some times lost its external speaker sound, so i cannot hear the rings, when i press on the back of the device, exactly on the battery cover in the middle between the two dummy holes and the usb port, it works again. Do u think that this is due to the coaxial damage also, even i don'y have any problem in the screen??
Click to expand...
Click to collapse
nope. open up and check the contacts
omega_ said:
nope. open up and check the contacts
Click to expand...
Click to collapse
Thank you very much for your advice, I'll check. Thanks
hbahaie said:
Thank you very much for your advice, I'll check. Thanks
Click to expand...
Click to collapse
I have disassembled my uni and checked for all connections, but there was no improvement. I can confirm that the disappearance of external speakers sound is not due to co-axial cable. The proof is that i extracted my main borad from my uni and implanted it in another one, i assumed that the problem will be rsolved, but the same problem still exists. Ok, now i can disassemble my uni for smallest piece, but any one advise me where is th connection part or the piece that causes that problem. Again a brief description of the problem:
when there is a coming call, i cannot here the ring or it is sevrely intermitent, also when i play any WMP file, i cannot here the sound, if I press firmly on the base or around the keyboard the sound comes again and may last for a few minutes or disappear after another press. So, there is a lose part in the main board i think that needs fixation, but which one????
Hi all
Now it takes me more than a month to upgrade my JASJAR due to a lot of problems I faced during this upgrading adventure… anyway, the last problem I still have is that after upgrading the screen goes crazy, I mean if you press on the screen the colours are mixed for few seconds and then its ok but at any time I touch the screen again the same happened so you can imagine what if I am going to dial a number or write a message …. So can anyone advice me what to do? …
The rom version is 1.13.82
Radio 1.04.02
Extrom 1.13.188
And I think the bootloader 1.00 and I don’t know why I feel that the bootloader is the reason ... I made a deep search but I couldn’t find problem like mine
gingerchristopher said:
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
Click to expand...
Click to collapse
Sitting next to my M5000 and all of a sudden the screen turned on but was white!
Following your lead I found that the first i.e. 'underneath' connector was not fully home. A little push and all is well.
Took the time to pack out the housing for the stylus to stop the little blighter escaping whilst in there.
Thank you for taking the time to post gingerchristopher.
Pete
Related
I had repaired my hinge once, afterthat, I installed the new i-mate ROM. The display become strange since then... It is the most strange when displaying pictures. It looks like the entire picture has been digitally modified by color blur?! (I'm not sure how to discribe it) It just like a lot of areas is rendered by the same color (the source picture has far more complicated details, but it is all been cut) And it is not a 3rd party software problem...
I assure my-self that this is not the ROM problem, I installed the old O2 ROM, and the problem still exist....
So can u guys please give me some advices?
Shall I send it back to repair? Could a hinge repair done that damage?
einsteinck said:
Shall I send it back to repair? Could a hinge repair done that damage?
Click to expand...
Click to collapse
Check the connectors have not come loose first, then check the cable in the hinge. What did you do to repair the hinge?
Richard
I did not repair the hinge by my-self. I send it to Lemel repair station. And I don't know how to check the hinge or the cable on my own...
What I want to know is: Is this a hardware problem or a software one...
The set of cables if broken, cannot be re soldered or repaired...u will have to go in for a new set of cables and that is quite dearer around 15-200 USD
hdubli said:
The set of cables if broken, cannot be re soldered or repaired...u will have to go in for a new set of cables and that is quite dearer around 15-200 USD
Click to expand...
Click to collapse
That's a lot for a cable :shock: . I have repaired a jasjar that had sheared using an m5000's intact cable to map out a circuit plan of all the pins. I'll upload a diagram when I find it again.
Richard
Screen Cable needed
Hi there
can u pls tell me where did u get the cable from, i have the same problem and i want that part so i fix my phone.
lookign forward to hearing from u and thx in advance
Regards
Hi there.I don´t know if this post goes here.Sorry if it doesn´t.I didn´t know where to put it
I was changing the digitizer on my Desire HD and I realize that that I broke the ribbon on the picture.Can anyone help me about what to do?Thanks in advance.
Sadly been there and done that....Only 1 solution-buy another. This process is next to impossible without lots of experience-parts are very fragile! Your best bet is to buy an entire assembly with the digitizer and lcd already attached. Much much easier, but not easy by any means still. Good luck.
rootntootn said:
Sadly been there and done that....Only 1 solution-buy another. This process is next to impossible without lots of experience-parts are very fragile! Your best bet is to buy an entire assembly with the digitizer and lcd already attached. Much much easier, but not easy by any means still. Good luck.
Click to expand...
Click to collapse
Thanks.I´ll do that.
you can fix that.
google ribbon cable fix and follow the procedure
(can't post direct link)
btw.
this you can't fix because the lines are simply too small
(I'm waiting for new LCD)
yamFZ6 said:
you can fix that.
google ribbon cable fix and follow the procedure
(can't post direct link)
btw.
this you can't fix because the lines are simply too small
(I'm waiting for new LCD)
Click to expand...
Click to collapse
A bit complicated for me.I will buy another lcd.Thanks anyway.
Hi again.I change the screen but now the wifi won´t work.I can´t activate the wifi.It says error.It´s like i don´t have a wifi antenna.Any help?
wifi antenna
I think your problem is bigger than an antenna. The antenna is the same one as the gps antenna and is fitted in the panel around the flash leds. If you were to enable the wifi and just could not pick up any access points, then I would say it was your antenna, but if you are receiving an error, it is more likely that either the wifi module is damaged or somehow disconnected.
Do the rest of the radio parts work? i.e. GPS, Cell, bluetooth? Can you tell me exactly what the error is that you are receiving?
Tamagotono
tamagotono said:
I think your problem is bigger than an antenna. The antenna is the same one as the gps antenna and is fitted in the panel around the flash leds. If you were to enable the wifi and just could not pick up any access points, then I would say it was your antenna, but if you are receiving an error, it is more likely that either the wifi module is damaged or somehow disconnected.
Do the rest of the radio parts work? i.e. GPS, Cell, bluetooth? Can you tell me exactly what the error is that you are receiving?
Tamagotono
Click to expand...
Click to collapse
The cell,3g and gps are working fine.Bluetooh and wifi aren´t.When I activate the wifi I get an error message(it just shows "error").When I try to activate the bluetooth it just does nothing.
Thank you
bcm5 said:
The cell,3g and gps are working fine.Bluetooh and wifi aren´t.When I activate the wifi I get an error message(it just shows "error").When I try to activate the bluetooth it just does nothing.
Thank you
Click to expand...
Click to collapse
did you check flex ribbon connection and rips on flex.
(also check volume buttons)
yamFZ6 said:
did you check flex ribbon connection and rips on flex.
(also check volume buttons)
Click to expand...
Click to collapse
You are right.The volume button are not working!I didn´t try them before.What does it have to do with the wifi?I will open it again.
bcm5 said:
You are right.The volume button are not working!I didn´t try them before.What does it have to do with the wifi?I will open it again.
Click to expand...
Click to collapse
not much, but it is simple test for the flex ribbon.
open the phone and check the flex connection too motherboard
worst possible thing is that you ripped the flex ribbon during removal from middle chassis
2 areas worth checking-the reciever jack at the top of the phone CAN be put on in the wrong direction-red wire should be towards the top of the phone, black towards the bottom. The long, all black wire running by the camera is the bluetooth coaxial cable and maybe not on its connector properly-kind of pops on when right-check both ends. It also could be damaged/pinched running up through the phone. It could also just be a bad component on the upper board and that whole board needs replacing-a pain after what you've done already.
bluetooth/wifi and volume buttons not working
I think yamFZ6 is right. You likely have a cable not fully seated or a damaged cable. Both the Bluetooth and wifi are on the same chip so it makes sense that both of them would fail together, the volume buttons are a separate module, so they are likely all on a single cable that has issues.
One last thing to try before tearing it apart again, do a full wipe and see if it works properly. This is a long shot, but worth checking and can help with troubleshooting if you cannot find any cable issues.
Good luck,
Let us know what you find.
Tamagotono
Hi.Sorry for the delay.Been busy with work.I took some pictures of the phone.I don´t know if they will help.
http://img31.imageshack.us/img31/4475/dscf1491c.jpg
http://img837.imageshack.us/img837/4964/dscf1487b.jpg
http://imageshack.us/photo/my-images/163/dscf1488a.jpg/
http://img818.imageshack.us/img818/9624/dscf1483n.jpg
Looks like the black wire (blue tooth coaxial) near the camera is in toward the battery area too far...battery would be pushing in on it every time and could have broken it...admit that's a long shot...but. Starting to feel like a new "upper" circuit board is in order...hope this helps
rootntootn said:
Looks like the black wire (blue tooth coaxial) near the camera is in toward the battery area too far...battery would be pushing in on it every time and could have broken it...admit that's a long shot...but. Starting to feel like a new "upper" circuit board is in order...hope this helps
Click to expand...
Click to collapse
Do you know where to buy it?
I have seen it for sale somewhere out there but can't find out where that was now. I would look for a "parts" phone on ebay. usually you get more than a fair amount of usable other parts with it. I just did this for that exact issue plus I needed a 'mid frame'. I got just about everything else with it also as the lower, main board was the problem with that particular phone, Got a usable digitizer, lcd, case, extra wires, camera etc etc all for around $60. You also get the added luxury of more practice/expertise with assembly.
bcm5 said:
Do you know where to buy it?
Click to expand...
Click to collapse
ebay $38 free shipping
yamFZ6 said:
ebay $38 free shipping
Click to expand...
Click to collapse
Can you pass the link?Thank you.
bcm5 said:
Can you pass the link?Thank you.
Click to expand...
Click to collapse
http://www.ebay.com/itm/Original-Fl...782?pt=LH_DefaultDomain_0&hash=item3f149ef696
I have a few pictures of my galaxy nexus broken down if anyone would like to ask me questions on how and where things go they can. I actually find this phone to be very easy to get apart and if careful can be reassembled in 15 minutes. I was actually replacing my speaker with some old parts I bought off a guy. No more crackling! Anyways in the process grabbed some pics
U can see the first three are the screen bottom speaker, main board, vibe, etc. The last pic she's all back together
Sent from my Galaxy Nexus using xda premium
Somehow I imagined a picture of me tearing down a smartphone where I was photoshopped out and replaced with a picture of a dog in a labcoat saying: "I have no idea what I'm doing"
Yep this phone is one of the easiest ive worked with. had to open mine to replace the earpiece. the only thing to take care of is the volume ribbon and vibrator wires, they can snap off really easily.
IINexusII said:
Yep this phone is one of the easiest ive worked with. had to open mine to replace the earpiece. the only thing to take care of is the volume ribbon and vibrator wires, they can snap off really easily.
Click to expand...
Click to collapse
is the imei sticker that is attached onto the black plastic removable from the main board?
IINexusII said:
Yep this phone is one of the easiest ive worked with. had to open mine to replace the earpiece. the only thing to take care of is the volume ribbon and vibrator wires, they can snap off really easily.
Click to expand...
Click to collapse
Yes sir....I just stuck a razor blade between them and the housing and they come right off connected to a gel like glue. This was good because sticking them back in place they actually stayed. U also have to remove the vibrator motor and the long black wire running down alongside the battery compartment (it has connectors on each end) then of course your two ribbon connectors for main board then one ribbon connector for bottom speaker. Didn't touch cams no need to.....very very easy job in fact it was to easy.
I have to replace my USB board (my USB port was damaged) and I am a newbie doing this kind of service myself. I bought it on ebay:
http://www.ebay.com/itm/OEM-Charger...ltDomain_0&hash=item35bc2f9280#ht_3392wt_1052
Do you think it is possible for someone with no experience to make it? I think I will try it myself, not in the mood to send it to some repair shop and wait 30 days..
juliano_q said:
I have to replace my USB board (my USB port was damaged) and I am a newbie doing this kind of service myself. I bought it on ebay:
http://www.ebay.com/itm/OEM-Charger...ltDomain_0&hash=item35bc2f9280#ht_3392wt_1052
Do you think it is possible for someone with no experience to make it? I think I will try it myself, not in the mood to send it to some repair shop and wait 30 days..
Click to expand...
Click to collapse
Yes for sure...but if u do not feel safe doing it then take it in. I know to get to the usb the whole speaker and housing comes off of the top of that. Which is one screw then a ribbon fairly easy....then u just work something thin in between that and housing like a guitar pic or Mac card. I would go with guitar pic tho so u don't mess the corners of your card up. I know that once the speaker portion is off u see in my first pic the USB I think has its on board. I truthfully did not take that portion of it out thought it was kind of pointless. If u need help I will assist u if u decide to do it yourself
sarni84 said:
Yes for sure...but if u do not feel safe doing it then take it in. I know to get to the usb the whole speaker and housing comes off of the top of that. Which is one screw then a ribbon fairly easy....then u just work something thin in between that and housing like a guitar pic or Mac card. I would go with guitar pic tho so u don't mess the corners of your card up. I know that once the speaker portion is off u see in my first pic the USB I think has its on board. I truthfully did not take that portion of it out thought it was kind of pointless. If u need help I will assist u if u decide to do it yourself
Click to expand...
Click to collapse
Thanks, I think I will try it myself, just have to wait for it to arrive.
juliano_q said:
Thanks, I think I will try it myself, just have to wait for it to arrive.
Click to expand...
Click to collapse
Yea dude pm me and I'll definitely help out
Thats pretty neat man, do you know where the GPS chip is?
I replaced my back cover and apparently I damaged the GPS chip cause I have NO gps lock, software side its ruled out (I flashed many diff ROMS, kernels and Radios and it used to work well before I opened up my Gnex)
Thank you.
where is the VZ LTE radio? maybe i can swap mine out for one that doesnt cause signal drops.
Sergio PC said:
Thats pretty neat man, do you know where the GPS chip is?
I replaced my back cover and apparently I damaged the GPS chip cause I have NO gps lock, software side its ruled out (I flashed many diff ROMS, kernels and Radios and it used to work well before I opened up my Gnex)
Thank you.
Click to expand...
Click to collapse
The battery cover? Hmmmm. I am pretty sure the GPS chip is on the opposite side of motherboard. Looking at ifixit photos it says right by rear camera on the opposite side of motherboard.
Edit...also if u look at first pic in my pictures look on right side of battery compartment . See the black wire with the connectors on each end? I wonder if the connector closest to bottom came loose or has something to do with it
10roller said:
where is the VZ LTE radio? maybe i can swap mine out for one that doesnt cause signal drops.
Click to expand...
Click to collapse
Not sure I have GSM model. And dude good luck with that unless u know how to solder chips on to motherboards that is nearly impossible and I think swapping a lte chip for another lte chip won't solve your problem
sarni84 said:
The battery cover? Hmmmm. I am pretty sure the GPS chip is on the opposite side of motherboard. Looking at ifixit photos it says right by rear camera on the opposite side of motherboard.
Edit...also if u look at first pic in my pictures look on right side of battery compartment . See the black wire with the connectors on each end? I wonder if the connector closest to bottom came loose or has something to do with it
Click to expand...
Click to collapse
Thanks, appreciate your time.
I checked out ifixit, thinking that in the process of removing the cover I could of hit the GPS chip or something, but since you pointed out that its on the opposite side of the motherboard that's not a possibility. Since I have not removed the mother board.
I have not opened it again, afraid of ruining something else.
But I guess I will have to in order to check the wire you speak about.
Salutations
I sent my phone in for repair to Samsung via Expansys for a bad external speaker. Back when it went bad, phone was too new to have all parts available as spares on the net plus the phone was still under warranty so I send it back to Samsung via Expansys-usa. But what I think happened is that Expansys didn't send it to Samsung and repaired it inhouse. I can say that because all screws inside the phone had chewed up heads and the repair didn't look good however the external speaker was working. First thing I found out that external volume rocker was not working anymore. So I send it back again to Expansys and I just received it back today with a note saying that the volume rocker ribbon pins have come away from the main board and taken the pin with them.
Bottom line is that they didn't repair the phone. Any ideas on how I can get this fixed? Do I have to change the ribbon? if I want to do it myself or this sort of damage requires a new board?
Any ideas comments are appreciated.
Edit: Link to photo showing the pins that are separated from the board
sarni84 said:
I have a few pictures of my galaxy nexus broken down if anyone would like to ask me questions on how and where things go they can. I actually find this phone to be very easy to get apart and if careful can be reassembled in 15 minutes. I was actually replacing my speaker with some old parts I bought off a guy. No more crackling! Anyways in the process grabbed some pics
U can see the first three are the screen bottom speaker, main board, vibe, etc. The last pic she's all back together
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Hi Sarni,
I accidentally snapped the ribbon (refer to attached pic, circled in red), and now my speaker is not working anymore. I guess that ribbon was for connecting the speaker and headphone jack? . What do you think i should do now, replace the whole piece?
I also intend to replace my damaged charge port, but not sure how to proceed for that.
Thanks,
Dennis
Some how (isn't that what they all say) got water in my GNex USB Port which caused the port to fry once charger was plugged in. Phone still fully functions as normal, just can't charge it. After pricing out a few options, I've decided to replace the part myself. Should everything go well, this should save me at least $35.
Just wondering if anyone else here as had to do this, would love to hear how it went for you. I'm currently waiting for the part to be shipped to me.
There's been quite a few people (not me so far) who've had to change their usb ports because they failed (stopped charging). There's several threads on how to do it, I've not bookmarked them but search would probably turn them up.
Should be pretty simple if the charging port is on a daughterboard and not on the main PCB. It's pretty easy to remove the lcd/digitizer + mainboard from the housing, and if it's just a daughterboard you should be able to disconnect the old part from the connector and attach the new one.
Thanks for the replies! ifixit.com actually has a detailed step by step, just wanted to see if anyone here ran into any issues while doing it or not.
Careful with the buttons
Gforce083 said:
Thanks for the replies! ifixit.com actually has a detailed step by step, just wanted to see if anyone here ran into any issues while doing it or not.
Click to expand...
Click to collapse
Its fairly easy to replace the USB board if done with care and proper tools. A word of advice, when you remove the back cover ( the step after removing screws) pay attention to not drop the rubber buttons..... they are hard to find once they hit the floor . Anything than that, just do it with love and you will do fine
Success! Time to put the Aria back in the closet!
I take that back, the microphone (which is part of the usb port board) on the new board does not work. Attempted to make a phone call and they could not hear me. Used a voice recording app and got nothing. Looks like I'll be getting another replacement.
I've got to hand it to Wholesale Gadget Parts, Inc out of Oklahoma. That's saying a lot coming from a Texan, we usually aren't too fond of Oklahoma. As stated the other day, the replacement board I got had a faulty microphone. Called WGP, no questions asked shipped me a new one and got it within 48 hours. My GNex is now back to fully functioning order!
Hey all,
I just replaced the charging port on my m8 and wanted to let people know it is straight forward. My port got corroded and was shorting out, melting the adapter and not charging the phone. I sent it in hoping for warranty, but the replacement quote was $400! (due to S-off they "had" to replace the entire motherboard). The phone has a separate pcb with the micro usb charge port and headphone input.
example:
http://www.witrigs.com/media/catalo...a71cb48e3d52cb890e76f9e6353/1/0/109063-01.jpg
To remove this board you need to do a few easy things:
1) disconnect the ribbon and remove the insulating tape (to reattach to new part)
2) unsnap the small white power cable
3) loosen the screw on the motherboard near the headphone input. This is clamping down the assembly a bit
tools required:
phillips 00
t5 torx bit
spudger/guitar picks
I would recommend prying the phone out of the frame starting from the bottom. I started from the top and bent the thin strip of aluminum above the sim slot when prying it out.
Also, you can pry the bracket/spring off the top of the old usb port to give the new one a tight fit if your replacement didnt come with it (like mine)
Lastly, just note that power button fell out as soon as I pried the frame apart from the guts. This made it a bit of a pain to reassemble - just be sure to reassemble with the top in first. That will keep the power button in place.
The replacement part cost me $30, so it was definitely worth it! phone now works great.
bookfast said:
Hey all,
I just replaced the charging port on my m8 and wanted to let people know it is straight forward. My port got corroded and was shorting out, melting the adapter and not charging the phone. I sent it in hoping for warranty, but the replacement quote was $400! (due to S-off they "had" to replace the entire motherboard). The phone has a separate pcb with the micro usb charge port and headphone input.
example:
http://www.witrigs.com/media/catalo...a71cb48e3d52cb890e76f9e6353/1/0/109063-01.jpg
To remove this board you need to do a few easy things:
1) disconnect the ribbon and remove the insulating tape (to reattach to new part)
2) unsnap the small white power cable
3) loosen the screw on the motherboard near the headphone input. This is clamping down the assembly a bit
tools required:
phillips 00
t5 torx bit
spudger/guitar picks
I would recommend prying the phone out of the frame starting from the bottom. I started from the top and bent the thin strip of aluminum above the sim slot when prying it out.
Also, you can pry the bracket/spring off the top of the old usb port to give the new one a tight fit if your replacement didnt come with it (like mine)
Lastly, just note that power button fell out as soon as I pried the frame apart from the guts. This made it a bit of a pain to reassemble - just be sure to reassemble with the top in first. That will keep the power button in place.
The replacement part cost me $30, so it was definitely worth it! phone now works great.
Click to expand...
Click to collapse
Hey there. Interesting to know that you replaced it all your self . Did you put everything back perfectly ? I mean the display being aligned properly to the body, the speaker grills being flushed with the body; ? Weird to ask, but did you damage anything while doing it all yourself ? Like the screen scratches, or something else ? Sorry, for asking these... Thanks in advance :good:
Tej XFire said:
Hey there. Interesting to know that you replaced it all your self . Did you put everything back perfectly ? I mean the display being aligned properly to the body, the speaker grills being flushed with the body; ? Weird to ask, but did you damage anything while doing it all yourself ? Like the screen scratches, or something else ? Sorry, for asking these... Thanks in advance :good:
Click to expand...
Click to collapse
I haven't re-glued the speaker covers back on yet so I dont know if they will be perfectly flush or not, although they still look flat so I think it will look good.
The only damage is a slight bend in the frame on the screen side of the sim tray slot. The metal is thin, and I pried against it to get the hardware out of the frame. That is why I recommended to start from the bottom when separating the two. Doing this should allow others to avoid this problem. It is slight, maybe 1/4mm gap where it used to be flush along the side of the screen above the sim tray.
Otherwise everything was smooth. The screen/frame etc are still mint.
bookfast said:
I haven't re-glued the speaker covers back on yet so I dont know if they will be perfectly flush or not, although they still look flat so I think it will look good.
The only damage is a slight bend in the frame on the screen side of the sim tray slot. The metal is thin, and I pried against it to get the hardware out of the frame. That is why I recommended to start from the bottom when separating the two. Doing this should allow others to avoid this problem. It is slight, maybe 1/4mm gap where it used to be flush along the side of the screen above the sim tray.
Otherwise everything was smooth. The screen/frame etc are still mint.
Click to expand...
Click to collapse
Cool, you've done it like a pro then. :good: .Any picture describing the damage would be helpful, if you can provide. Is the display mint ? No scuffs/scratches on it ? But, my speaker grills were damaged onto the edges after the repair was carried out. Does yours show the same sign ? I don't mean the flatness of the grills, but the damage that should be done, while prying out the grills. A picture showing your damage would be helpful to me. I could do the same, if you insist. Thanks ! :good:
Mine is busted. But I cannot find the PCB. The link in the op is dead.
Any ideas?
http://www.witrigs.com/oem-charging-port-flex-for-htc-one-m8
bookfast said:
http://www.witrigs.com/oem-charging-port-flex-for-htc-one-m8
Click to expand...
Click to collapse
I actually got one off eBay for $17.21. Works perfectly.
Just wondering....
Sounds like you were able to avoid some steps in the teardown guide, if I recall it was damn near a total disassemble. Do you have a lot of experience with phones? I want to fix mine, but don't need a tedious project right now. If I repair mine I'd like to put a mini USB in place of the micro if possible, I've seen too many damaged micro usb to trust or like them. As for the speaker grills, if you're picky buy replacements, they're cheap.
microphone on charging port?
bookfast said:
Hey all,
I just replaced the charging port on my m8 and wanted to let people know it is straight forward. My port got corroded and was shorting out, melting the adapter and not charging the phone. I sent it in hoping for warranty, but the replacement quote was $400! (due to S-off they "had" to replace the entire motherboard). The phone has a separate pcb with the micro usb charge port and headphone input.
example:
link
To remove this board you need to do a few easy things:
1) disconnect the ribbon and remove the insulating tape (to reattach to new part)
2) unsnap the small white power cable
3) loosen the screw on the motherboard near the headphone input. This is clamping down the assembly a bit
tools required:
phillips 00
t5 torx bit
spudger/guitar picks
I would recommend prying the phone out of the frame starting from the bottom. I started from the top and bent the thin strip of aluminum above the sim slot when prying it out.
Also, you can pry the bracket/spring off the top of the old usb port to give the new one a tight fit if your replacement didnt come with it (like mine)
Lastly, just note that power button fell out as soon as I pried the frame apart from the guts. This made it a bit of a pain to reassemble - just be sure to reassemble with the top in first. That will keep the power button in place.
The replacement part cost me $30, so it was definitely worth it! phone now works great.
Click to expand...
Click to collapse
My HTC M8's main call microphone has stopped working, and through searches on Google it seems that perhaps that this mic (first mic, non-speakerphone mic) is built into the charging port. Is this the case? I cannot find anything that explicitly says this, and I'd love to get the phone back in working condition.
dm8233 said:
My HTC M8's main call microphone has stopped working, and through searches on Google it seems that perhaps that this mic (first mic, non-speakerphone mic) is built into the charging port. Is this the case? I cannot find anything that explicitly says this, and I'd love to get the phone back in working condition.
Click to expand...
Click to collapse
I too am also curious if the mic is on the usb part because my mic doesnt wrk when i make calls.
Will replacing the usb port fix the problem?
Harvey02 said:
I too am also curious if the mic is on the usb part because my mic doesnt wrk when i make calls.
Will replacing the usb port fix the problem?
Click to expand...
Click to collapse
I called HTC, the mic is on the USB port, although you should make sure that it's not a software issue first. There are several threads on the internet easily found through Google which discuss doing a factory reset to resolve this if it turns out to be a software problem.
Thanks for your reply. I did a factory reset when I got the phone but it still doesn't work. Does that mean it's not a software problem and that if I replace the usb it should work?
Harvey02 said:
Thanks for your reply. I did a factory reset when I got the phone but it still doesn't work. Does that mean it's not a software problem and that if I replace the usb it should work?
Click to expand...
Click to collapse
I would think so, yes.
Thanks! Do you know of any online source confirming that?
Harvey02 said:
Thanks! Do you know of any online source confirming that?
Click to expand...
Click to collapse
No, but from what I've studied about it, it should work. Feel free to contact HTC, they actually have a live chat available somewhere on their website. Good luck to you.
Very interesting, I contacted htc and we went through diagnostics together and the rep said that I have to send it in. I asked him if the mic was on the usb assembly and he said that it wasn't and rather it was on the motherboard, and I clarified that we were talking about the primary mic which is located near the usb port. Confusing bec everywhere I saw online said that the mic is on the usb assembly. Go figure!
Harvey02 said:
Very interesting, I contacted htc and we went through diagnostics together and the rep said that I have to send it in. I asked him if the mic was on the usb assembly and he said that it wasn't and rather it was on the motherboard, and I clarified that we were talking about the primary mic which is located near the usb port. Confusing bec everywhere I saw online said that the mic is on the usb assembly. Go figure!
Click to expand...
Click to collapse
What did you end up doing? Did you discover if it was on the motherboard or the part with the USB port? I've waited a while to repair mine for other reasons, and I am now prepared to fix it. Any information would be helpful.
Just a few notes on my own experience.
I replaced the screen in my friend's M8 a few months ago. Seemed like everything went ok, except after I got done, the mic didn't work anymore. This is strange because it worked fine before, and all I did was remove/replace the circuit board in the process (yes, the small one at the bottom with the uUSB port). However, the upper rear microphone was still working I believe, because people on the other end of the line could still hear if the phone was put into speakerphone mode. I don't know why it would stop working all of a sudden.... Ran the HTC audio test using *#*#3424*#* to confirm main mic wasn't working and that the aux rear mic was.
Fast forward to this week, with my own M8. The uUSB connector was going bad, and I was having trouble charging, so I figured it was time to replace that circuit board. Ordered a new one and replaced, but when I got it back together, the USB port was fine of course, but my mic wasn't working now, just like my friends! On top of that, the headphone jack didn't work at all. Most likely the "cable inserted" signal wasn't getting back up to the motherboard, but didn't check. So pissed off. Also, the new board I got didn't have the bottom left RF connector/circuitry populated. Thinking from research that it might be for the GPS? I should have tested when the board was in there, but didn't. Fixed a bad solder joint on the original board's uUSB connector, which helped, but still charging is a bit messed up. I'd rather have a working mic and headphone jack and have to play with the cable to get to charge for a while until I get another board (from another supplier, jerks).
Yes, the mic is the small chip on the very left side of the board. It has a hole underneath the chip, going through the board and to the front face to receive the acoustics.
I don't know why the mic not working is so common after an HTC One M8 tear down, as it seems many others are having the same issue. One theory I have is that pulling the circuit board from the motherboard while power is still applied (not unplugging the battery first) might be jacking the microphone somehow. Just a theory, but I'd recommend to be safe that anyone replacing the board should unplug the battery cable before replacing the USB/mic circuit board.
I'd just like to chime in to say that I've read about some people having problems with the mic not working after replacing the USB board. From what I understand, there are two different versions of it, and replacing it with the wrong one can cause that very issue. You should look into it.
EDIT: Source - http://www.witrigs.com/blog/htc-one-m8-audio-jack-not-work-after-charging-board-replacement/
Mic broken after USB repair
Old thread but I have the same problem. Replaced USB board and now my mic does not work. However I am pretty certain I did order the correct board (had 2x connectors for my Verizon HTC m8). And my microphone jack work great which others indicate is often broken along with the mic. Anyone have any workarounds?