my o2iis lost extrom after hard reset. what wrong? help!
Hi
Describe your problem more clearly.
I don't understand, how can you "loose" ExtROM.
You lost data from ExtROM ?
Your ExtROM disappeared ?
Tell me what happened.
Related
Hi guys,
I've a problem to restore the original firmware of my VODAFONE V1640.
My PDA accept all the possible ROMs (from official I-MATE to AKU releases) but it don't accept the original VODAFONE ROM.
The problem is that, after upgrading the PDA with VODAFONE ROM the PDA remain blocked on splash screen with ROM version.
No soft/hard reset can solve the problem. To unblock the PDA I've to put it in bootloader mode and upload another ROM...any kind but not a VODAFONE ROM.
Any ideas to solve that issue? Is it possible that this problem is due to I've unlocked the EXT.ROM?
Thank you.
Pablo
VODAFONE 1640
ROM Version: 2.50.15 FLY (09/20/06)
Radio Version: 1.04.10
Protocol Ver.: 42.37.P8
Ext. ROM: Storage
pablito75 said:
Hi guys,
I've a problem to restore the original firmware of my VODAFONE V1640.
My PDA accept all the possible ROMs (from official I-MATE to AKU releases) but it don't accept the original VODAFONE ROM.
The problem is that, after upgrading the PDA with VODAFONE ROM the PDA remain blocked on splash screen with ROM version.
No soft/hard reset can solve the problem. To unblock the PDA I've to put it in bootloader mode and upload another ROM...any kind but not a VODAFONE ROM.
Any ideas to solve that issue? Is it possible that this problem is due to I've unlocked the EXT.ROM?
Thank you.
Pablo
Click to expand...
Click to collapse
Have you emptied the extrom before you flashed Vodafone rom? If not (and there were several files as programs etc) the flash could be failed because branded roms have specific extrom.
.dredd. said:
Have you emptied the extrom before you flashed Vodafone rom? If not (and there were several files as programs etc) the flash could be failed because branded roms have specific extrom.
Click to expand...
Click to collapse
Hi,
yes, the EXTROM is completely empty, moreover the upgrade process is always SUCCESSFULL, no error messages.
I had one idea regaring extrom. After I flashed my V1640 with the IMATE rom, I've cracked the extrom to use it as storage memory. Do you think this can be the problem? An extrom unlocked can be restored to his original (locked) status?
Thank you.
Pablo
pablito75 said:
Hi,
yes, the EXTROM is completely empty, moreover the upgrade process is always SUCCESSFULL, no error messages.
I had one idea regaring extrom. After I flashed my V1640 with the IMATE rom, I've cracked the extrom to use it as storage memory. Do you think this can be the problem? An extrom unlocked can be restored to his original (locked) status?
Thank you.
Pablo
Click to expand...
Click to collapse
Hi
I think complete branded roms (CE rom, extrom, radio rom together) must restore the hidden extrom condition.
Just some spot ideas:
do you put your device into bootloader before flash?
which bootloader version you have?
make a hardreset before flash
has your device been unlocked? (if yes I do not know what to do )
may your flash file be corrupted?
did you try to use maupgradenoid? (of course only if the flash file is not one exe)
did you do a hardreset after flash? (2 softkey and reset simultaneously then press zero)
good luck
.dredd. said:
Hi
I think complete branded roms (CE rom, extrom, radio rom together) must restore the hidden extrom condition.
Just some spot ideas:
do you put your device into bootloader before flash?
which bootloader version you have?
make a hardreset before flash
has your device been unlocked? (if yes I do not know what to do )
may your flash file be corrupted?
did you try to use maupgradenoid? (of course only if the flash file is not one exe)
did you do a hardreset after flash? (2 softkey and reset simultaneously then press zero)
good luck
Click to expand...
Click to collapse
Hi Dredd,
regarding your spot ideas:
1) Yes I've put the device into bootloader before flash
2) Version 2.01
3) Hard Reset before flash done
4) My device was not locked, VODAFONE ITALIA didn't lock it...I've just unlocked the EXTROM
5) Nope, other guys used it without problems
6) Yes I used both ROMUPG and MAUPG...same (unsuccessfull) results
7) Yes I did it...same (unsuccessfull) results
Pablo
Hi guys,
could it be a solution to upgrade back the bootloader? Any other ideas?
Pablo
so, i've just attempted to upgrade from WM5 to WM6 with the upgrade from www.my-xda.com, and it seems to have gone horribly wrong. reckon this can be fixed, it's just starting at the o2 screen now and not booting.
Edit/Delete Message
Can you tell us if you did everything in the order as it is written on the forums here? CID unlocking... etc etc.
What was the last thing " you did to it " before it "crashed" ?
Is there a way I could recover my Artemis from "No GSM" Problem?
Did a search but did not found a thing.
greetings
What is "NO GSM" problem?
Did you tried to upgrade your Radio ROM?
Cheers
Hello, owns one of you an original O2 Rom, without RadioRom?
Radio, I can no longer flash. "NoGsm" Error see here.
Or better, how can I delete the entire ROM ...? With MTTY? So the current ROME (Helloween Rom) is not more going for them and not by hard reset can be restored.
Thanks for the effort in advance.
HERM100
IPL-1.01
HERM100
SPL-2.03
Hi everybody, first of all I'm sorry if I ask something already discussed..
Is it possible to restore original IPL / SPL without USB port using bluetooth (to copy diamimg file) and rebooting from the phone?
I have a Diamond with Olinex 1.93 SPL installed and my USB port is not working. I can't charge batteries and I can't connect with PCs; only the headphone is working.. I need to re-apply original conditions to return my phone on warranty..
I restored the original Italian ROM 2.03 (from HTC site) putting it into the 4gb memory via bluetooth and installing it from internal memory; then I'm trying to restore the SPL putting the original HTC SPL nbh file into the memory installing it booting from internal memory. But after the process is completed and I reset, I have always the 1.93 by Olinex version on the display.
I tried with a lot of signed and unsigned versions of SPL, the process is always completed but anything change.
Could you help me and tell me what to do? Thank you for your help...
As far as I know it isn't possible, yet. But as I also wanted to change SPL the same way we flash ROM and Radio images from our Internal Storage, I PM'ed cmonex about it a few months ago.
She thinks it's possible to change SPL without USB. In the end I didn't need it anymore and I couldn't test it for her. So we left it at that. But if you contact her, maybe she can help you?
Ok I asked to cmonex.. In the last days I continue flashing images from the 4gb memory but anything changes...
Mandragore said:
As far as I know it isn't possible, yet. But as I also wanted to change SPL the same way we flash ROM and Radio images from our Internal Storage, I PM'ed cmonex about it a few months ago.
She thinks it's possible . But if you contact her, maybe she can help you?
Click to expand...
Click to collapse
cmonex isn't woman i think !?
fabiovacc said:
Ok I asked to cmonex.. In the last days I continue flashing images from the 4gb memory but anything changes...
Click to expand...
Click to collapse
I think, you have to use Jump=SPL if your spl after flashing isn't changed, use button search, and type JUMP SPL