Problem upgrading back to Vodafone ROM - JASJAR, XDA Exec, MDA Pro Software Upgrading

Hi guys,
I've a problem to restore the original firmware of my VODAFONE V1640.
My PDA accept all the possible ROMs (from official I-MATE to AKU releases) but it don't accept the original VODAFONE ROM.
The problem is that, after upgrading the PDA with VODAFONE ROM the PDA remain blocked on splash screen with ROM version.
No soft/hard reset can solve the problem. To unblock the PDA I've to put it in bootloader mode and upload another ROM...any kind but not a VODAFONE ROM.
Any ideas to solve that issue? Is it possible that this problem is due to I've unlocked the EXT.ROM?
Thank you.
Pablo
VODAFONE 1640
ROM Version: 2.50.15 FLY (09/20/06)
Radio Version: 1.04.10
Protocol Ver.: 42.37.P8
Ext. ROM: Storage

pablito75 said:
Hi guys,
I've a problem to restore the original firmware of my VODAFONE V1640.
My PDA accept all the possible ROMs (from official I-MATE to AKU releases) but it don't accept the original VODAFONE ROM.
The problem is that, after upgrading the PDA with VODAFONE ROM the PDA remain blocked on splash screen with ROM version.
No soft/hard reset can solve the problem. To unblock the PDA I've to put it in bootloader mode and upload another ROM...any kind but not a VODAFONE ROM.
Any ideas to solve that issue? Is it possible that this problem is due to I've unlocked the EXT.ROM?
Thank you.
Pablo
Click to expand...
Click to collapse
Have you emptied the extrom before you flashed Vodafone rom? If not (and there were several files as programs etc) the flash could be failed because branded roms have specific extrom.

.dredd. said:
Have you emptied the extrom before you flashed Vodafone rom? If not (and there were several files as programs etc) the flash could be failed because branded roms have specific extrom.
Click to expand...
Click to collapse
Hi,
yes, the EXTROM is completely empty, moreover the upgrade process is always SUCCESSFULL, no error messages.
I had one idea regaring extrom. After I flashed my V1640 with the IMATE rom, I've cracked the extrom to use it as storage memory. Do you think this can be the problem? An extrom unlocked can be restored to his original (locked) status?
Thank you.
Pablo

pablito75 said:
Hi,
yes, the EXTROM is completely empty, moreover the upgrade process is always SUCCESSFULL, no error messages.
I had one idea regaring extrom. After I flashed my V1640 with the IMATE rom, I've cracked the extrom to use it as storage memory. Do you think this can be the problem? An extrom unlocked can be restored to his original (locked) status?
Thank you.
Pablo
Click to expand...
Click to collapse
Hi
I think complete branded roms (CE rom, extrom, radio rom together) must restore the hidden extrom condition.
Just some spot ideas:
do you put your device into bootloader before flash?
which bootloader version you have?
make a hardreset before flash
has your device been unlocked? (if yes I do not know what to do )
may your flash file be corrupted?
did you try to use maupgradenoid? (of course only if the flash file is not one exe)
did you do a hardreset after flash? (2 softkey and reset simultaneously then press zero)
good luck

.dredd. said:
Hi
I think complete branded roms (CE rom, extrom, radio rom together) must restore the hidden extrom condition.
Just some spot ideas:
do you put your device into bootloader before flash?
which bootloader version you have?
make a hardreset before flash
has your device been unlocked? (if yes I do not know what to do )
may your flash file be corrupted?
did you try to use maupgradenoid? (of course only if the flash file is not one exe)
did you do a hardreset after flash? (2 softkey and reset simultaneously then press zero)
good luck
Click to expand...
Click to collapse
Hi Dredd,
regarding your spot ideas:
1) Yes I've put the device into bootloader before flash
2) Version 2.01
3) Hard Reset before flash done
4) My device was not locked, VODAFONE ITALIA didn't lock it...I've just unlocked the EXTROM
5) Nope, other guys used it without problems
6) Yes I used both ROMUPG and MAUPG...same (unsuccessfull) results
7) Yes I did it...same (unsuccessfull) results
Pablo

Hi guys,
could it be a solution to upgrade back the bootloader? Any other ideas?
Pablo

Related

Do Not flash your Artemis with a different carrier/cooked Rom without cid unlocking

Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rs314.rapidshare.com/files/102261908/RUU_Artemis_O2_UK_3.4.206.2_4.1.13.50_03.06.90_Ship.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Hi Folks,
Firstly many thanks for everyone's freely given time! Great Forum!
There seems to be a lot of confusion about who and what can be flashed with the German official ROM and then with Bepe's creation.
Can we try to clear some of the ambiguity for us simple folk? Might stop some of the repeated questions littering threads in both related artemis sections.
So, many thanks to anyone who can clarify the situation by providing definitive answers to the following questions!
(1) Can an 02 Orbit from, say, the UK or Holland be flashed with either the German and/or Bepe's ROM, even if it is CID Locked (i.e. same devcie and carrier, different country).
(2) Can a non-Orbit O2 device be flashed with either the German or bepe's ROM, even if it is CID Locked (i.e. different devcie but same carrier).
(3) Is there a fall back Rom available for non-German O2 Orbits should the upgrade fail?
Again, many thanks for your time.
Cheers - Adam.
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Pocha said:
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Click to expand...
Click to collapse
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Take a look to this post http://forum.xda-developers.com/showthread.php?t=299154 I tried it, and now I have wm6 on my HTC P3300, it's true that you can't have upgrades to radio or extrom, but meanwhile I can use wm6
kaemon said:
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Click to expand...
Click to collapse
cid = country id i.e. locked to that country/language/vendor thats why cid needs unlocking before flashing diff any of aboves roms.
imei checker
is it just me or is any one on this forum a bit sceptical of a merchant who so brazenly operates their business under the assumption that all potential customers are all fraudsters/criminal scum? is there no - more customer friendly- merchant who can perform this much valued service?
my first serious post!
xan
My HTC has no vendor since I can use all SIMs from different vendors, now I upgraded from HTC Spanish version to HTC WWE version, so Vendor and Language (plus location?) locks are disabled?
meschle said:
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here http://www.imei-check.com/c3unlock.php
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.[/Q
HI I TRY TO FLASH MY HTC P3300 (BRICKED) WITH FACTORY ROMS AND NEGATIVE RESULT THE PROCESS STOP AT 2%.
CAN ANYBODY HELP ?
Click to expand...
Click to collapse
Hello,
I would like to Upgrade my O2 XDA Mini S with Windows Mobile 6 (localized / German version). I hardly searched for such a WM6 Upgrade but there seems to be no final version for my device and german language.
I figured out that there is an WM6 OS Upgrade for the XDA Orbit and XDA Trion (coming soon). Might it be possible to flash only an OS-ROM for WM6 extracted from one of these O2 ROM updates? I was able to extract the OS-Image and I already backed up my current ROM using aWizard. aWizard also supports flashing a single OS-ROM only.
Some people in this forum already said I might brick my device. Is it possible or not to flash the OS ROM? Is it risky to give it a try?
Do you know a final working German Upgrade for the XDA Mini S (Qtek 9100)?
Best Regards
Gabriel
Hello
I am in Bootloader mode right now and I started the updater but it says it can't connect. I see the device in Windows and my Artemis says it sees a USB connection (it says "USB" on the bottom of the screen in the white stripe).
What do I have to do for it to start working for a change?
I think I found the problem: First, it would be wise to close mtty . Then it is important to reboot and after entering Bootloader mode to connect USB not while booting. After trying it a dozen times it suddenly worked.
Please, could someone explain how I can unlock the CID with USPL? It starts the batch, when it's done I have a black screen with the Linux penguin and it says loaded. When the RUU tries to connect, though, the device doesn't respond. So I take it the process doesn't actually get finished...
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Hi I Try To Flash My Htc P3300 (bricked) With Factory Roms And Negative Result The Process Stop At 2%.
Can Anybody Help ?
Just to inform you guys that i tried the USPL Method 3 times and always got an error message UPDATE ERROR (i think it was error number 270 ??).
Well, that was because after the DOS mode went until 100, and the dialog box for the ROM Update Utility appeared, this dialog box ask to wait for the PDA to be activesynced before presing the "UPDATE", so i was waiting for the PDA to reconnect to activesync (while in a black screen mode) before pressing update . THAT was the mistake. Don't wait for it to RE connect to activesync (strange right ?) and just press the NEXT and UPDATE without waiting anything.
THEN it worked i just upgrade to WM6 without VENDOR ID error anymore thanks to the USPL method
just got a dopod m700 for my wife i know it is a g4 ppc hence will this zip file work on it to get the cid unlocked or do i have to follow a similiar procedure as i had to for my wizard
sorry i got my answer
please ignore my earlier question
fout said:
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Click to expand...
Click to collapse
Hi there,
any pointer to this fool-proof way?
A foolish GioVAX
****ed up my artemis with this rom by upgrading stucks in loading mode WM6 screen. Can access bootloader but it always tell me upgrading again that i have the wrong rru....
CAN ANYBODY PLEASE UPLODE THE ORIGINAL WM5 ROM in GERMAN by htc for Artemis
(NOT Orbit oder MDAIII)
OR where can i get the original rom to downgrade????
Please help
thanks
Last night I flash my Dopod M700 to WM6 but after reboot it only enter to the boot flash screen showing IPL SPL 1.11 OS 3.7 etc......
I did unlock the CID but the flashing of WM6 seems not ok.
Then I enter to the bootloader mood and flash the WWE WM5.0 of HTC M700 rom. It did turn the M700 back to WM5.0 and then I flash it with WM 6.0 again.
However, I forgot to unlock CID again before flashing. Then now the device stuck in the boot screen with SPL 1.28 OS 3.7 etc......
I still can enter to bootloader mood, but I have tried to heal the device by flashing it with the WWE WM 5.0 rom of HTC M700 again. But it cannot be flashed again!!!! Error message came out that the rom is not for my device!!
Help!!!!!!!!!
Is the wm5 wwe rom the factory rom for your device or are you from another country?

Restore original O2 UK ROM from Bootloader

Hi everyone,
A while ago I was stupid and tried to flash my O2 XDA Orbit without fully reading the instructions and therefore ended up "bricking" the device. It turns on but seems to hang on the "O2 Welcome Screen" which shows the following information:
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
The device can boot up into the bootloader screen no problems and I have tried to install various ROM's from the German O2 WM6 ROM to the UK T-Mobile WM5 ROM but with no success, it just gets to 3% then reboots.
Does anyone know a way that I can restore the original O2 UK WM5 ROM from the bootloader? Or at least get it working again?
At this point there is no O2 Rom avaliable, you will have to wait till they finally release the WM6 Rom sometime this Summer.
Lordao
try this
http://forum.xda-developers.com/showthread.php?t=312495
go to this tread and test it
1234567890
No Joy
pvdhelm said:
http://forum.xda-developers.com/showthread.php?t=312495
go to this tread and test it
Click to expand...
Click to collapse
Thank you however I have tried the above instructions but my device just gets to 3% then reboots.
Does anyone know what the MTTY.EXE software is all about and is there any way that I can manually force the device to Flash using this?
Or!!!!!
Is there a way for me to clone a mates xda orbit and drop the image onto mine? Both were purchased at the same time just I thought i'd be clever and update mine which didn't quite work out.
Have you already tried to flash a rom by using your microSD card ?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
try to flash it from sd card if your orbit is cid unlocked
not sure
I dont think my device is cid unlocked as it would have worked with the updated rom install, wouldn't it? sorry pretty new to all this.
I have tried to flash straight from the sd card but it just searches through the sd card then goes straight to the multicoloured bootloader screen.
Anyother ways or is there a better rom that i could use?

Vario 2 wm6 downgrade

I have a problem. I've installed the shaps 4.0 version wm6, my radio: 1.50.0.0
extRom: 3.60.20070822. And now i will to downgrade wm6 to my former wm5. It's from T-Mobile and so i downloaded: HER_TMDE_1211113_1050200_GER_SHIP
>ROM< but if I start it, it verifys the information on my HTC and a tri-color display appears. After some time the error comes: your phone isn't connected to the USB and so forth... I don't know what to do, maybe you can help me.
Greeting
use the custom ruu
I can't use it because i have a warranty. Can you give me the link of ruu wm5 t-mobile GER please?
mdavario2 said:
I can't use it because i have a warranty.
Click to expand...
Click to collapse
Not any more you don't if you flashed it with an unofficial ROM!
I hope you HardSPL'd it first...
Here is Mrvanx downgrade guide. Shipped WM5 ROM upgrades can be found in Hermes Wiki (which I can not access now due to some strange error). Your warranty is certainly void when you flash unofficial ROMs (of course if you hand it in for repairs with unofficial ROM installed), if you SuperCIDed your device and so on.... If you are not supercid and you can downgrade both windows and radio you should be ok. Be careful though - downgrading is quite risky.
Ok thanks a lot. One question more: is it normally that i'm unable, i have radio 1.50, to install other radio versions? I already tried to install 1.20 version but without succes.
The problem is that I can only install RUU_... ROMs and Radio, but I don't know why???
Secondly I didn't make SuperCID and HardSPL I only selected if I installed the Shap's ROM, how can I see that I don't have any warranty?

Please Really Need Help for Flashig / Upgrading

Hi!
I am totally new to HTC Diamond. I got my set from England (Orange). It was locked. I was able to unlock it with the free solution available. Ok. Now the problem is I heard about TouchFLO but it I can't seem to activate. What can be the reason and what can I do?
Second, mine says it has :
ROM Version: 1.37.405.1 WWE
Radio Version: 1.20.OliNex
IS it ok. Or can I get a new more better version. Whats with radio version? Please guide me what can I do? I right now have no idea. I tried the tutorials as well but I am confused.
thats not the radio version, thats the SPL (Service Provider Lock).
and its a Hard SPL, which i presume you flashed to 'unlock' it.
the Hard SPL lets you flash a different ROM (but voids your warranty) it doesnt SIM unlock it tho.
TF3D (Touch Flo 3D) should run automatically when the phone is started, if it doesnt, go to Start> Settings> Personal tab> Today> Items tab and make sure "TouchFLO 3D" is checked.
Old ROM
thornofcarrion said:
Hi!
I am totally new to HTC Diamond. I got my set from England (Orange). It was locked. I was able to unlock it with the free solution available. Ok. Now the problem is I heard about TouchFLO but it I can't seem to activate. What can be the reason and what can I do?
Second, mine says it has :
ROM Version: 1.37.405.1 WWE
Radio Version: 1.20.OliNex
IS it ok. Or can I get a new more better version. Whats with radio version? Please guide me what can I do? I right now have no idea. I tried the tutorials as well but I am confused.
Click to expand...
Click to collapse
The ROM version you're showing here is really old (as ROM's go!). You can get a link to the latest Orange ROM (v1.93) here, or flash one of the superb cooked ROM's in this forum
grahamkdt said:
The ROM version you're showing here is really old (as ROM's go!). You can get a link to the latest Orange ROM (v1.93) here, or flash one of the superb cooked ROM's in this forum
Click to expand...
Click to collapse
Thanks a lot. But flashing with v1.93 will not do anything bad with the set. I once tried to upgrade my Imate jamin and it went dead and was not repaired. So I am a little hesitant you know.
you have already voided your warranty by flashing a Hard SPL. i would suggest flashing it back to the original, then flashing the latest Orange ROM (its not supposed to be too bad).
mugglesquop said:
you have already voided your warranty by flashing a Hard SPL. i would suggest flashing it back to the original, then flashing the latest Orange ROM (its not supposed to be too bad).
Click to expand...
Click to collapse
Thanks a lot. Could you please further tell me how to flash it.
read the tutorial in the stickie.
lots of reading
Thansk. Just tell me which is the latest and best version that I should use?
did u even look at the other threads? ....
4 threads down from yours:
http://forum.xda-developers.com/showthread.php?t=457980
Ok ok man. i got it myself without looking them thanks. But now I have this problem that messages are not being sent. i tried soft reset and hard reset but no avail. What could be the reason for that? B
By the way I upgraded it with 1.93 flash given above in this thread.
Try the new 2.00 ROM.
You can also try one of the smaller lite ones
(Swtos, Panosha), each time followed by a HARD reset (backup your Internal Storage data first).
If THAT doesn't work, you might have an SMS configuration/operator issue.
A.
messages not sent
make sure you have set the phone to your service provider....in connections

Upgrading Rom of already upgraded Uni... Unlock again?

So, I got my hand on an Uni G4 (xda exec) that has 6.5 on it... I want to downgrade to the Tmo UK WM5 rom.
How do I know if I have to unlock the sim and cid (again)?
Under what circumstances would the sim and/or cid be re-locked (after it had been unlocked)?
And how do I know if I should do a DOC format? I see that there are a few ROMs that once installed require a DOC format if you want to change the ROM again.
And I did search the forums first, and could find the answers I need. I'm still checking up on the ROM that is currently installed on my Uni - 5.2.23016 (5.3.0 Luca16)
TIA!
Once it has flashed the 1st cooked ROM it has to be full unlocked, no need to do it again so you can downgrade without any problem os locking sim.
Have a look here to get one great wm5 ROM
http://forum.xda-developers.com/showthread.php?t=549207
Hope it helped,
Awsome!
Thanks!

Categories

Resources