Is there a way I could recover my Artemis from "No GSM" Problem?
Did a search but did not found a thing.
greetings
What is "NO GSM" problem?
Did you tried to upgrade your Radio ROM?
Cheers
Related
I search forum but cant find answer. My Artemis is HTC P3300 with original WM6. SPL is 1.11.
I tryed to flash two ROM-s: Artemis Vanila 2.01 and O2 Premium 2.0 and get same error 260 connection where activesync disconnect.
Please can someone tell me what to do? What I am doing wrong?
Renta said:
I search forum but cant find answer. My Artemis is HTC P3300 with original WM6. SPL is 1.11.
I tryed to install two ROM-s: Artemis Vanila 2.01 and O2 Premium 2.0 and get same error 206 connection where activesync dissconnect.
Please can someone tell me what to do? What I am doing wrong?
Click to expand...
Click to collapse
there are lots of posts about this, the best way to fix it seems to be to flash back to the original ROM and then try again.
I really search forum but answers did not help me. I tryed also SD flash but cant start a bootloader-push down voice dial+on/off+reset button and nothing happend.
Ok, I dont have original WM5 ROM on my desktop PC only official WM6. Is it enough to hard reset or just flash back official WM6? Sorry if I ask stupid questions.
Maybe I wasnt clear enough in a first post.. I originaly had WM5 and than I flash official WM6. So, I dont have WM5 ROM anymore. I can only flash back to WM6. I try to flash WM6 and same error apear.. I will try to find on net originaly WM5 and flash it than we will see..
I found original WM5 ENG Rom on the web and try to flash but get same error again! I really dont know what to do anymore.. Tryed SD flash but bootloader didnt start, trying flash back with original WM5 also failed..
Who can help me?? People it is christmas time come on...
Same issue here.
Trying to flash from Artemis Touch 3.01 lite to Full version.
Having problems with Error 260.
It's normally because you are trying to flash with a SDHC card in.
Thanks
Ok, at the time you get the error, I presume your device has gone into Bootloader mode? If yes, then without doing anything to your device, stay in the boot loader screen and try running Rom Update process again. This time it may go through it.
Regards,
Carty..
have you removed your storage card while updating ?
With the new sdhc drivers there could be problems when the storage card is insert into device.... hth
ups....just saw Juice05's answer....i was too late with my answer
Help, I have HSPL, SSPL, and Energy's July 10 rom, and i can't update my rom to the 24 july version because i hang on the multicolored screen... Help guys
HSPL 3.
so, i've just attempted to upgrade from WM5 to WM6 with the upgrade from www.my-xda.com, and it seems to have gone horribly wrong. reckon this can be fixed, it's just starting at the o2 screen now and not booting.
Edit/Delete Message
Can you tell us if you did everything in the order as it is written on the forums here? CID unlocking... etc etc.
What was the last thing " you did to it " before it "crashed" ?
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Please...
Does someone can help me?
it seems my problem can come from vista drivers. I foud a topic :
http://mahmood1.com/upgrade_pocket_pc_ruu_in_vista.aspx
But even folowing the instructions my update is still locked at 0% and tells me an error 262.
I ve done the whole instructions and installed the old driver but no matters. Somebody knows a way to solve my problem?
cdfr31 said:
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Click to expand...
Click to collapse
Using signed Hard-SPL?
Use this this to flash your radio : http://htcroms.aplace4u.biz/signed/radio/Diamond_Radio_1.00.25.05.rar
Hi Corian,
Thnaks to you I ve finaly flashed my radio!
Your trick was the good one.
Now I am trying to install a new rom casue i dont like the 0.95 bepe elite.
I have exactly the same problem with every flash i am attempting. It stays at 0% and tells me a 262 error.
My SPL is olinex 1.30.
Could you tell me whats the best and if you can give me the link to download the good files.
I d like to install an official HTC Rom and maybe for this i have to change the SPL?
Thanks for your great help.
HI,
Finally I have solved all py problems.
The problem was coming from the hard SPL I had installed.
I ve managed to change the hard spl which wasn t possible. I had to force the mode bootloadrer and then the hard spl was flashed and replaced by 1.40 Olinex unsigned.
Then I flashed rom and radio and splash screen without any problem.
In fact the whole thing about drvier Vista wasn t the problem I think.
Thanks to Corian who helped me to identify the source of the problem : incompatibility with hard spl taking only signed things.
Sorry if there already was a threat...
I have a problem, I upgraded from the original WM5 to the original WM6 (downloaded from the HTC website) after the upgrade was done the phone gets stuck at the mobile operator screen and reboots and does that over and over again till battery is dead.
I tried to do an upgrade to WM6.1 from here but no luck, also I tried to download the original WM5 from htc to downgrade but HTC states that the software is not supported.
Anybody got a good idee how to solve this problem?
Thanks in advanced....
Nobody got a solutions to solve this problem? Or ever heard about it?
Solved the problem by installing the orignal WM5 ROM from bootloader.
Hi All
Well as the title says..
I have an O2 XDA orbit wm6.1(I think).. And have wanted to upgrade to WM 6.5 and alos upgrade the Radio roms too (has 3.06) But no matter what I try I cant get it to upgrade etc... Have tried do the USPL thing the whole lot but I always get either error 207 or 206 ALWAYS.....
Has anyone else had any problems similar and did you over come them if so how?
Regards
Lohtse
flash a stock rom from the wiki, and start taking it from there on:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
take out ALL cards, sim and usb cards
greetz
Hi Thank you for your reply..
But already tried that and fail to upgrade/~Flash... Tried using 2 pc's and 3 laptops and a netbook as well....
regards
lohtse
tried flashing from sd card|
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
what does your bootscreen display?
ipl
spl
give ALL details!!!
xda orbit should be german- did you use the correct stock rom?
Take the sim and the micro sd card out.
Sorry for bad english. ;D