Sorry if there already was a threat...
I have a problem, I upgraded from the original WM5 to the original WM6 (downloaded from the HTC website) after the upgrade was done the phone gets stuck at the mobile operator screen and reboots and does that over and over again till battery is dead.
I tried to do an upgrade to WM6.1 from here but no luck, also I tried to download the original WM5 from htc to downgrade but HTC states that the software is not supported.
Anybody got a good idee how to solve this problem?
Thanks in advanced....
Nobody got a solutions to solve this problem? Or ever heard about it?
Solved the problem by installing the orignal WM5 ROM from bootloader.
Related
I started with i-mate JASJAR AKU 3.2 Rom Update 1.90.94 (96) then tried Ivans.,.after the upgrade I restarted the cell but got stuck at "the upgrade screen" . I tried again. Wont start the system - stops at the upgrade screen.
Ran 1.90.94(96) again to get myself back to the thing...restarted after upgrade (successful it said)...the same upgrade screen. Tried both roms again but after a so called successfull upgrade they restart in the Upgrade bootloader mode each time....
Whats going on and can i run an old O2 AKU 2 official update? or is downgrade impossible?
i had the same problem once while flashing an official ROM upgrade from i-mate.
nothing i did could get the device to work again.. i took it to i-mate, and they replaced the motherboard, as the flash chip seems to have got busted
wish i had better news
im screwed if thats the case since i used a o2 exec with a jas jar (imate) upgrade, which breaks my warranty unless i can revert somehow back to o2
EDIT UPDATE: God loves me! hehehe...an old o2 version from the O2 website saved me ! It worked ! Learning now - dont use 3.2 AKU till its totally ready
Hi everyone,
A while ago I was stupid and tried to flash my O2 XDA Orbit without fully reading the instructions and therefore ended up "bricking" the device. It turns on but seems to hang on the "O2 Welcome Screen" which shows the following information:
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
The device can boot up into the bootloader screen no problems and I have tried to install various ROM's from the German O2 WM6 ROM to the UK T-Mobile WM5 ROM but with no success, it just gets to 3% then reboots.
Does anyone know a way that I can restore the original O2 UK WM5 ROM from the bootloader? Or at least get it working again?
At this point there is no O2 Rom avaliable, you will have to wait till they finally release the WM6 Rom sometime this Summer.
Lordao
try this
http://forum.xda-developers.com/showthread.php?t=312495
go to this tread and test it
1234567890
No Joy
pvdhelm said:
http://forum.xda-developers.com/showthread.php?t=312495
go to this tread and test it
Click to expand...
Click to collapse
Thank you however I have tried the above instructions but my device just gets to 3% then reboots.
Does anyone know what the MTTY.EXE software is all about and is there any way that I can manually force the device to Flash using this?
Or!!!!!
Is there a way for me to clone a mates xda orbit and drop the image onto mine? Both were purchased at the same time just I thought i'd be clever and update mine which didn't quite work out.
Have you already tried to flash a rom by using your microSD card ?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
try to flash it from sd card if your orbit is cid unlocked
not sure
I dont think my device is cid unlocked as it would have worked with the updated rom install, wouldn't it? sorry pretty new to all this.
I have tried to flash straight from the sd card but it just searches through the sd card then goes straight to the multicoloured bootloader screen.
Anyother ways or is there a better rom that i could use?
I search forum but cant find answer. My Artemis is HTC P3300 with original WM6. SPL is 1.11.
I tryed to flash two ROM-s: Artemis Vanila 2.01 and O2 Premium 2.0 and get same error 260 connection where activesync disconnect.
Please can someone tell me what to do? What I am doing wrong?
Renta said:
I search forum but cant find answer. My Artemis is HTC P3300 with original WM6. SPL is 1.11.
I tryed to install two ROM-s: Artemis Vanila 2.01 and O2 Premium 2.0 and get same error 206 connection where activesync dissconnect.
Please can someone tell me what to do? What I am doing wrong?
Click to expand...
Click to collapse
there are lots of posts about this, the best way to fix it seems to be to flash back to the original ROM and then try again.
I really search forum but answers did not help me. I tryed also SD flash but cant start a bootloader-push down voice dial+on/off+reset button and nothing happend.
Ok, I dont have original WM5 ROM on my desktop PC only official WM6. Is it enough to hard reset or just flash back official WM6? Sorry if I ask stupid questions.
Maybe I wasnt clear enough in a first post.. I originaly had WM5 and than I flash official WM6. So, I dont have WM5 ROM anymore. I can only flash back to WM6. I try to flash WM6 and same error apear.. I will try to find on net originaly WM5 and flash it than we will see..
I found original WM5 ENG Rom on the web and try to flash but get same error again! I really dont know what to do anymore.. Tryed SD flash but bootloader didnt start, trying flash back with original WM5 also failed..
Who can help me?? People it is christmas time come on...
Same issue here.
Trying to flash from Artemis Touch 3.01 lite to Full version.
Having problems with Error 260.
It's normally because you are trying to flash with a SDHC card in.
Thanks
Ok, at the time you get the error, I presume your device has gone into Bootloader mode? If yes, then without doing anything to your device, stay in the boot loader screen and try running Rom Update process again. This time it may go through it.
Regards,
Carty..
have you removed your storage card while updating ?
With the new sdhc drivers there could be problems when the storage card is insert into device.... hth
ups....just saw Juice05's answer....i was too late with my answer
Help, I have HSPL, SSPL, and Energy's July 10 rom, and i can't update my rom to the 24 july version because i hang on the multicolored screen... Help guys
HSPL 3.
Hi!
I've an Artemis (o2 germany-software) and i already updated it to WM5 a year ago. Now my friend bought the new artemis with WM6 on it and with that cube and everything (with the o2 branding). So i wanted to get WM6 and saw it on the o2 homepage as a free update just like WM5 update the year before. So i tried to update and a comunication error 302 appeared at 51%. After the restart only the bootloader worked. then i found out that it's possible to load the update on a fat32 formated sd-card and it worked but the hardware reset wasn't possible out of the bootloader in which it switched back every time. So i took any cooked rom for my device, tried to update and it interrupted after 3%. When i now restarted my Artemis it worked perfekt with the o2 branded WM6 soft. But that soft looked so different to my friends one. So i used the USPL update to unlock my CID and choose any rom for my device. it failed. so i had to use the original rom and another rom to get it working again. then i choose the next new rom for Artemis....
I've tried it at least 30 times now with a different Rom every time and i'm close to a complete nervous breakdown. Does anyone have an idea what i could do to get WM6 with cube?
Its simple heres the link for wm 6.1 with cube - http://forum.xda-developers.com/showthread.php?t=371182
make sure you run the tool to cid unlock firtst though.
I already tried that one. it failed at 85% with update error 302
oh man!!!!! it worked!!!!! I don't know how but the full version with cube worked!
I'm so happy! Who made that Rom?
hi all,
i have a mda pro (htc 9000) from T-mobile, during wm5 and many bugs
i have tried to upgrade, i find some update rom overhere and followed the
instructions, direct during upgrade the device comes up in bootloader screen
en got stuck, i have tried everything even reset e.t. still i cannot get out
of the boatloader screen, i have tried an wm6 rom but i gaot the message
checking the information on your device and nothing is happend anymore
still waiting for a long time.
i have no idea
please help
thanks
Download an official Shipped ROM meant for your Universal and flash it. It should then pass through the screen.
thanks for the tip, i find the rom, but it need for upgrade active sync installed
and that's the issue now, because active sync does do nothing now when the device is in boatloader mode.
IT UPGRADING NOW pfffffffffffff
after intestalling again active sync...
oeps
Read Wiki!
Read Wiki.
Use mtty...DOC format.
Flash original WM5 ROM.
THEN
CID unlock with upgradeutility Noid.
You are free to do almost anything.
Again Read Wiki.
Read hdubli ...thread for stuck in bootloader.
Read Roms from Cotulla thread....it's helpful.
As long as you have intact bootloader , don't panic...it is not dead yet.
thanks for the advise, i find the wiki and solve the problem.
on my old xp pc and installed active sync, the device was direct upgraded
and the orginal rom is back to the latest version.
i find also the 6.5 rom but for now it works