Hi there. I've just acquired an XDA Exec (finally!) and I've got a question. My Exec has arrived with the 1.13.82 WWE ROM installed on it, dated 30/11/05. The last ROM that O2 have published on my-xda.com is 1.13.188. Higher version number = better ROM right? So I should just stick with the ROM version that came on the device and not overwrite it with the one on O2's website, correct?
Problem is, I can't install the GPRS Monitor program that came with it. When I try installing it via ActiveSync (I'm running v4.1) it gives the following error message:
"Unable to install application. Please update your device ROM to the required version before trying again."
So what should I do? Is there a way of fixing this and installing the program without installing the ROM from O2's website? Any help would be much appreciated! Thanks,
Mach
If you go to | Start (menu) | Settings | System (tab) | About (icon) | you should see something like "Windows Mobile Version 5.0 OS 5.1.195 (build 148xx.x.x.x) Can you post what your says?
Thanks;
Sure. It reads as follows:
OS 5.1.1700 (Build 14354.0.1.1)
Does that help?
Mach
Mach said:
Hi there. I've just acquired an XDA Exec (finally!) and I've got a question. My Exec has arrived with the 1.13.82 WWE ROM installed on it, dated 30/11/05. The last ROM that O2 have published on my-xda.com is 1.13.188. Higher version number = better ROM right? So I should just stick with the ROM version that came on the device and not overwrite it with the one on O2's website, correct?
Mach
Click to expand...
Click to collapse
You are running the same rom thats on the o2 site. Check your version again and you should see you have rom 1.13.82 and extended rom 1.13.188
There is an acknowledged fault with the CD version of GPRS Monitor. If you download the 'app suite' from the o2 site it should install ok. You can get it from the same page that the rom is available to download.
Thanks for replying again, but unfortunately I'm getting the error with both the CD version and the version from the website. Any other ideas? (hopefully not a hard reset)
Mach
1. Run the website version again and you should get the options to 'modify, repair or remove'.
2. Choose the option to remove.
3. Run the website version again and this time it should just install.
Related
Hi can anyone tell me which is the latest Rom for the O2 XDA exec on the O2 network?
I upgraded one on my phone y'day and it is the
Rom : 1.30.107
Rom date : 04/11/06
Radio Version : 1.09.00
Protocol Version : 42.42.P8
ExtRom Version : 1.30.162 WWE
Is there any Rom that is newer than this one?
Please reply back asap....Thanks!!!
The latest i see on their (O2's) site is
Xda Exec ROM v 1.13.188
blingin said:
The latest i see on their (O2's) site is
Xda Exec ROM v 1.13.188
Click to expand...
Click to collapse
Point your browser here:
http://xda.o2.co.uk/xdaExecSoftware.aspx
Quote from the site:
"Updated Comm Manager, providing new buttons for controlling Direct Push Mail and active Data connections.
Updated Radio v1.09.00
Updated CE image v1.30.107"
does this upgrade include skype?
kanjer said:
does this upgrade include skype?
Click to expand...
Click to collapse
no. but u can always download it from skype's website
only imate ROMs include skype. so, if u r lazy, then, use the "ms_.nbf' of imate ROM :wink:
Upgrade
Hi can anyone tell me a few things
1) i bought the xda executive from O2 so i have their rom and features installed on mine.
2) if i want to use a 3 network card on it can i use it? where can i get the internet setting for the 3 network? and do i have to upgrade the rom to a 3 network or not?
3) if i want to use a vodafone sim card on it then would it be better if i upgraded the rom to a vodafone rom or should i just leave it to the O2 rom?
Thank You,
could only one tell me what improvement of this Rom compare O2 exec 1.13 Rom?
There is a much recent release of O2 with radio version 1.11.00. I used to see it on the topics here like 2 months ago.
iv the EXEC Iv shipped mine 2 India.....
These ppl ask for an O2 no....so I cant upgrade my exec ???
with the official rom ? :S
hey i guess this rom isnt on F.T.P..can anyone upload it on FTP ?
You wrong my dear,
the latest ROM from Exec is v1.30.162 ROM
Just follow the link, and you will find the info.
DavidT. said:
blingin said:
The latest i see on their (O2's) site is
Xda Exec ROM v 1.13.188
Click to expand...
Click to collapse
Point your browser here:
http://xda.o2.co.uk/xdaExecSoftware.aspx
Quote from the site:
"Updated Comm Manager, providing new buttons for controlling Direct Push Mail and active Data connections.
Updated Radio v1.09.00
Updated CE image v1.30.107"
Click to expand...
Click to collapse
162 is the extended ROM version... pretty meaningless... the OS is 107 as said earlier and that is what counts.
how can I install this ROM ???
I want to upgrade my rom...
But Im not sure what should be upgraded to...
can some 1 please help me out ?
On what can be a safe upgrade in ROM for XDA exec ???
It would be great if I could get the O2 upgrade in the site
but I have no O2 number..which should be provided
any suggestions ??
thank you
Missing camera application
I have a new Exec and I have the latest ROM version as displayed on the O2 web site. When I install using the Corporate option (code 0506) and the great O2_Exec_Connections_Only CAB. But the camera application seems to be missing (or components of it). Has anyone else found this and is there a solution? Do I have to do a full install and then delete the O2 junk?
I have a new Exec and I have the latest ROM version as displayed on the O2 web site. When I install using the Corporate option (code 0506) and the great O2_Exec_Connections_Only CAB. But the camera application seems to be missing (or components of it). Has anyone else found this and is there a solution? Do I have to do a full install and then delete the O2 junk?
Click to expand...
Click to collapse
Does the camera show up in the other install options?
I didn't even bother with the O2 junk, I just reset the device at the "wait 3 seconds" part so none of the O2 stuff was installed and my camera works fine.
Missing camera application
DavidT
Many thanks for your response. It turns out the ROM image was faulty. So, however many times I re-installed or in whatever configuration, the camera application was missing bits. So, I downloaded the latest ROM image and re-installed. Everything works fine now.
Like you, I avoid the O2 stuff.
I don't have an O2 number either, so how can I download the ROM?
any help guys?
Thanks
Swap and share ROMs between the Universal devices
Hi Guys,
I have a dump question, can all the Universal devices exchange ROM’s?
Otherworld, can a T-Mobile MDA pro use an O2 ROM or JasJar ROM???
Also what is AKU 3.0 or 2.2???????
I am confused and a little explaining will do…
Please help…
I
my969 said:
I don't have an O2 number either, so how can I download the ROM?
any help guys?
Thanks
Click to expand...
Click to collapse
yeah - anyone got a link where we can download the latest ROM?
I don't have an 02 number, just a data connection.
XDA Exec Upgrade
cktlcmd said:
There is a much recent release of O2 with radio version 1.11.00. I used to see it on the topics here like 2 months ago.
Click to expand...
Click to collapse
Where is this upgrade from what is the URL
Thanks in advance
I am currently trying to upgrade my Rom from the standard O2 version to the XDA-DEV Special Edition.
I have done this many times before on other XDA 2i's however this one doesn't seem to like communicating. Activesync with syncronise all folders and connect quite happily however when i try to run the Special edition Rom setup MS-DOS box appears verify version and reports unknown internal error. then when the setup software starts it verifies your system requirments, you select next and then it reports the following in a GUI Box.
Cannot execute the remote communication program.
Please make sure that the USB/Serial cable is connected properly.
To try and get arount this i have put the XDA in Bootloader mode and then run setup but still comes back with the same error.
Any help or ideas would be appreciated
ROM Version 1.11.00 WWE
ROM Date 01/27/05
RADIO Version 1.00.00
PROTOCOL Version 1337.39
ExtROM Version 1.11.171 WWE
XDA-DEV Special Edition is a rather old rom only! for wallaby devices
Thats weird as i have had it running on a himalaya in the past. Is there a ready made upgrade rom for an XDA IIi available. Bored with the O2 one, to many restrictions.
then you are the first i ever heard about who have portet a rom from 1 pda device to another
Thaks for that, I have found one of PUGS with the O2 stuff stripped out.
See how it goes with that one.
Many Thanks
I downloaded this ROM upgrade from O2 website (Xda Stealth ROM Upgrade (ENG) WWE_RM2_061208).
My stealth has a ROM ver. of WWE_RC061208. Radio ver KY3,LW, ExtROM ver. EXT_WWE_018.
Is my ROM same with the one I downloaded or different? If differrent, can I upgrade my present ROM with the one I downloaded from the O2 site? The ROM upgrade came with a warning that it can only apply to stealth with ROM RM060921. (This Rom upgrade applies ONLY to devices with the following system software:
ROM: RM060921)
Please help me.
TIA
rom upgrade
Hey Doctor_j
Nope it wont upgrade it. The upgrade you have already installed only fixed text input. It actually did something nasty to the bluetooth interface and also now has intermittent difficulty talking to my SD card.
if you think that the ROM60921 is the one you had previously (probably shipped with this one) then hard reset (reset hole plus right and left lower keys (windows and OK)) and upgrade to the new ROM.
mbb
What’s in P3600i ? (Also called CHT9110 or D810x)
Recently I bought a new Trinity~CHT9110 that is known
as P3600i or D810x in other countries.
The WM6 ROM of my new Trinity is in Chinese Traditional Version.
The hardware differences between P3600 and P3600i are
CPU 400Mhz upgraded to 500Mhz and storage memory
128MB upgraded to 256MB. ( Please see cap01)
I post what I found with P3600i in these days and
hope every body provides what they found as well
so that we can gather enough information to deal
with P3600i.
1) We can’t use any non-official ROM update utilities
to flash P3600i :
The Hard-SPL, CID unlocker, SSPL-TRIN or any other
update utilities couldn’t work for P3600i.
I tried to down grade to WM5 ROM, and it also failed
at 1%. I hope somebody can work out a new patch
that works..
2) Currently the only way to upgrade the Radio
ROM of P3600i to 1.50.08.11:
Originally the radio version of P3600i is
1.46.00.11
32.79.7020.19H
The radio update utility couldn’t work, either.
So currently the only way for us to upgrade to
1.50.08.11
32.83.7020.20H
is to download official upgrade ROM that is with
new radio version.
The latest official WM6 Chinese Traditional version
has updated to radio 1.50.08.11. So I can update
my new Trinity by flashing the entire official ROM.
(Please see cap02)
3) P3600 and P3600i use the same WM6 ROM:
In fact, the latest official WM6 ROM mentioned above
is released for CHT9100 (or P3600, D810) in HTC’s
web site.
I use this ROM to flash CHT9110 (or P3600i, D810x)
and it works perfectly without any error.
So we get a conclusion that the WM6 ROM released
for P3600 is the same as that used in P3600i.
4) The Extended ROM of CHT9110 (or P3600i,
D810x) has write-back design:
I found a way to mount the Extended ROM and
delete all the files in it. Just follow the two steps:
HKEY_LOCAL_MACHINE / System / StorageManger / Profiles / EXT_FLASHDRV /
----> Modify the value of MountHidden from “1” to “0”.
HKEY_LOCAL_MACHINE / System / StorageManger / Profiles / EXT_FLASHDRV / FATFS /
----> Modify the value of EnableCache from “0” to “1”.
Please see cap03. The Extended ROM is totally 9.94MB,
7.51MB in use and 2.43MB free. You can view all the
Extended ROM files in cap04.
After modify the registry, you can delete all the files
in the Extended ROM. If you occur the “ Action Failed”
notification, just try again and then the Extended ROM
becomes 0 MB in use.
(Please see cap05)
You can also try copying some files into the
Extended ROM.
But after a soft reset, the files you put into
Extended ROM disappeared and the original files
of Extended ROM are all written back to it.
5) There is one more different file in CHT9110’s
Extended Rom than CHT9100’s.
PT_Enable_WCC.cab
----> I don’t know what’s the usage of this file
This is very useful information. Can I ask you please where can I find the updated ROM you have mentioned, with the new radio??
---quoted
So currently the only way for us to upgrade to
1.50.08.11
32.83.7020.20H
is to download official upgrade ROM that is with
new radio version.
The latest official WM6 Chinese Traditional version
has updated to radio 1.50.08.11. So I can update
my new Trinity by flashing the entire official ROM.
Does this also mean that the wm6voip.cab wont run on the P3600i?
can you upload the full official p3600i ROM with radio version 1.50 to rapidshare?
also, can you test cpu usage when using stylus, on P3600 there is some issue with this, for example when you play some games and use stylus to navigate frame rate drops considerably, I'm just courious if this has been fixed..
yeah I want to know too
from teh HTC web site I can't find the ROM you mentioned above
A leakage of HTC's download website
SeaPea said:
This is very useful information. Can I ask you please where can I find the updated ROM you have mentioned, with the new radio??
Click to expand...
Click to collapse
I found a method that works currently to download
official WM6 ROM of different languages from HTC’s
website.
I guess HTC might close the download access if they
find the leakage mentioned below.
First, go to the HTC’s worldwide website:
http://www.htc.com/
Select the Region & Language you prefer.
Try to join the membership for free~ choose the way
that doesn’t need any purchased device s/n number.
For example, you select Australia-English.
Choose “Service & Support” --> “Download Now”
--> “Join Now, Go”
Then complete the Join Member Process.
If you choose Hong Kong-繁中(Hong Kong- Chinese Traditional)
or Taiwan-繁中(Taiwan-Chinese Traditional),
just choose “會員專區”(Member District)
--> “加入會員”(Join Membership)
Second, go to the official WM6 download website:
http://hsc.asia.htc.com/e-club/download/login.aspx
Select the language and region you’ve just join a membership.
Then you can see the latest WM6 ROM of that language.
HTC provides this rapid download website to customers
due to that the official websites often got stuck when
the WM6 first released in July.
You can join the membership in the www.htc.com website
then go to this rapid download website to log in and enjoy.
I have log in all the different regions and languages that HTC provided.
Only the Taiwan (Chinese) version has the latest radio
ROM of 1.50.08.11.
As you can see in the shortcuts below.
I wonder if you can use the Taiwan (Chinese) version
since you might not buy the CHT9110 in Taiwan.
Please note that the Hard-SPL, CID unlocker or SSPL-TRIN couldn’t work for P3600i.
Please also note that all the wm6 roms are for d810, p3600 or cht9100.
But until now I can get the cht9100 wm6 rom work perfectly for my cht9110,
nice exploit!!!
here is the direct link to the firmware...
http://210.64.124.194/download/CHT9100_TWN_WM6_Upgrade_20070705.zip
Thks for information, I got CHT9110, and have up to latest ROM, but any one can help that I need to flash to WWE (ebglish) Rom, as mention above Hard SPL,CID unlock or any other utility I search and found here can not help to change the rome to English..waiting for help.
to be frank,i won't buy it
kalechen said:
to be frank,i won't buy it
Click to expand...
Click to collapse
For people who are currently using CHT9100, P3600 or D810,
I suggest them to keep using~
it's not very necessary to change from CHT9100 to CHT9110.
But if you are planning to buy Trinity
or your Trinity is broken or got lost,
you are suggested to buy CHT9110
for the following two reasons.
1) CPU speed is promoted by 25%~comparing under the same brand.
2) The flash ROM is doubled~total 256MB, about 168MB available for storage.
That means you don't have to worry about
not enough space for installing progarms in the future.
4) The Extended ROM of CHT9110 (or P3600i,
D810x) has write-back design:
I found a way to mount the Extended ROM and
delete all the files in it. Just follow the two steps:
HKEY_LOCAL_MACHINE / System / StorageManger / Profiles / EXT_FLASHDRV /
----> Modify the value of MountHidden from “1” to “0”.
HKEY_LOCAL_MACHINE / System / StorageManger / Profiles / EXT_FLASHDRV / FATFS /
----> Modify the value of EnableCache from “0” to “1”.
Please see cap03. The Extended ROM is totally 9.94MB,
7.51MB in use and 2.43MB free. You can view all the
Extended ROM files in cap04.
After modify the registry, you can delete all the files
in the Extended ROM. If you occur the “ Action Failed”
notification, just try again and then the Extended ROM
becomes 0 MB in use.
(Please see cap05)
You can also try copying some files into the
Extended ROM.
But after a soft reset, the files you put into
Extended ROM disappeared and the original files
of Extended ROM are all written back to it.
5) There is one more different file in CHT9110’s
Extended Rom than CHT9100’s.
PT_Enable_WCC.cab
----> I don’t know what’s the usage of this file[/QUOTE]
Any ideas on how to flash the extended rom?
I'm guessing that we'd need to complie a new NBH with the desired programs.
I'm using 3600i , and waiting for cooking rom
craig_shih said:
I found a method that works currently to download
official WM6 ROM of different languages from HTC’s
website.
I guess HTC might close the download access if they
find the leakage mentioned below....
[/B][/COLOR]
Click to expand...
Click to collapse
wow, I got it now. and may consider updating it next time when my system hanged. I just got my HK version P3600i one month ago, and in satisfactory performance. Just see if it is worth the while updating the Radio. But will see.
Thank you very much for this leak....
I can get that rom for taiwan site too
thanks
but I dare not flash it as I want to backup the existing rom first.....
there's no method to backup the rom yet.......
I will keep noticing if someone works out the solution for us. I 'll post it here once the solution come out.
Radio rom with Bouygues
Hi
Someone knows if the radio rom of P3600i works with bouygues an if i can put it on my P3600 ?
Thanks a lot
Any New English ROM and radio for P3600i!!
hi25man said:
Any New English ROM and radio for P3600i!!
Click to expand...
Click to collapse
Are you currently using an English Rom? The Rom and Radio listed in your Signature matches mine exactly. And mine is the AUS WWE Rom. And if that's the case, can the others in this post flash this rom to their P3600i's?
SuperSport said:
Are you currently using an English Rom? The Rom and Radio listed in your Signature matches mine exactly. And mine is the AUS WWE Rom. And if that's the case, can the others in this post flash this rom to their P3600i's?
Click to expand...
Click to collapse
Yes, my Rom is an Engish. I am looking forward to using 6.1 & 6.0 cook ROM
Hello
I am new here, i have a qtek 9000 that run wm5, what should i do to up-grade to wm6. What up-grade do you suggest i need in order to increase the performance of my phone.
Here is all the information that i have on the phone.
rom version : 1.30.77 wwe
rom date 02/20/06
radio version; 1.11.00
Protocol version: 42.45.P
ExtROM version: 1.30.9090
The second problem that i hace is that the phone is constanly reseting, i don't know why, but when battery reach approx. 80% it turn off and reset. Then i have to plug in the charger in order for it to restart? Can anybody help me
thanks
My first post !
Hi, for the reset problem I suggest you to look to the wiki, you will find some types of strategies to fix this, it seems to be a battery problem(just my opinion). For the upgrade you have to look wath's the boothloader version of your device. If you have 1.00, you have to upgrade the boothloader before flashing a new wm6 rom. In any case you will find all this and other informations in the wiki. When you will be done, if you want, I will suggest you the best roms available .
P.S.: excuse me for bad english.
keleric said:
Hello
I am new here, i have a qtek 9000 that run wm5, what should i do to up-grade to wm6. What up-grade do you suggest i need in order to increase the performance of my phone.
Here is all the information that i have on the phone.
rom version : 1.30.77 wwe
rom date 02/20/06
radio version; 1.11.00
Protocol version: 42.45.P
ExtROM version: 1.30.9090
The second problem that i hace is that the phone is constanly reseting, i don't know why, but when battery reach approx. 80% it turn off and reset. Then i have to plug in the charger in order for it to restart? Can anybody help me
thanks
Click to expand...
Click to collapse
before upograding you have first to make a lot ( I really mean it) of reading thru 1) XDA_wiki and 2) all 3d you can on the different wm6 available ROMs ( see upgrade wm6 section) You can have an idea of what are the problems users have/are encountering.
My 1 cent
a)Enter into bootlader mode ( pls don t ask how, look and search) and find out if you have a G3 device ( vers 1.0x) or G4 ( vers 2.x) . Depending on this you have to first check if the ROM upgrade you ve selected among the different available is OK for your device. Few ROMS infact have different version for G3 and G4) . If you have a bootload vers 1.0 or below, first upgrade to a more recent version before even thinking to upgrade ROM.
the upgrade Bootload tools are available in general on your device site ( I have an Imate , I have the sw there) or look and search here....in this site there is EVERYTHING! go to the ftp section , link unders XDA-Wiki, Universal and search
b) upgrade to Active e Synch 4.5
c) Create a folder where you ll put the selected Wm6 version that you ve picked and unzip it.
d) You ll see the following files:
EnterBL
Get device data
RUU.conf
Ruu.dl
Ruuenc.dll
UI.dll
ROMUPGRADE.exe AND !!!!
nk-.nbf ( this is the ROM UPGRADE)
ms.-nbf ( this is the external ROM)
This is almost all what you need to start to upgrade. Infact you might also want to upgrade to a most recent radio version ( radio._nbf) . I am using 1.15 that is very stable and powerfull but pls read comment of users using the selected Wm6 you ve picked and check their coments. A higher version is not implicitely a better version.It depends on Wm6 rom version and the operator you re using.
Therefore, if you want to upgrade the radio as well , proceed to the FTP of universal, and download the radio version you like . Unzip the file , copy and paste JUST the radio._nbf file to the folder above created.
e)Connect to AS and make the last synch before the upgrade and disconnect
f) take sim and sd card out.
g) put down firewalls and antivirus on your PC
h) open AS and uncheck File/connection Settings/ USB connection
i) connect device to PC, you ll see AS wont start ( of course)
l) enter into bootloader mode
m) click on Romupgrade.exe
n) follow EXACLY instructions on your PC screen...be cool, be patiente. It will take some 20 minutes....
when everything is finished , disconnect , do a NORMAL soft reset and here you are.
Flag again USB connection in AS and synch. you have now a wm6 version. I am using Ranju 7.1 and it flys as an angel on my JJ, but I suppose there are plety good ones around