What’s in P3600i ? (Also called CHT9110 or D810x)
Recently I bought a new Trinity~CHT9110 that is known
as P3600i or D810x in other countries.
The WM6 ROM of my new Trinity is in Chinese Traditional Version.
The hardware differences between P3600 and P3600i are
CPU 400Mhz upgraded to 500Mhz and storage memory
128MB upgraded to 256MB. ( Please see cap01)
I post what I found with P3600i in these days and
hope every body provides what they found as well
so that we can gather enough information to deal
with P3600i.
1) We can’t use any non-official ROM update utilities
to flash P3600i :
The Hard-SPL, CID unlocker, SSPL-TRIN or any other
update utilities couldn’t work for P3600i.
I tried to down grade to WM5 ROM, and it also failed
at 1%. I hope somebody can work out a new patch
that works..
2) Currently the only way to upgrade the Radio
ROM of P3600i to 1.50.08.11:
Originally the radio version of P3600i is
1.46.00.11
32.79.7020.19H
The radio update utility couldn’t work, either.
So currently the only way for us to upgrade to
1.50.08.11
32.83.7020.20H
is to download official upgrade ROM that is with
new radio version.
The latest official WM6 Chinese Traditional version
has updated to radio 1.50.08.11. So I can update
my new Trinity by flashing the entire official ROM.
(Please see cap02)
3) P3600 and P3600i use the same WM6 ROM:
In fact, the latest official WM6 ROM mentioned above
is released for CHT9100 (or P3600, D810) in HTC’s
web site.
I use this ROM to flash CHT9110 (or P3600i, D810x)
and it works perfectly without any error.
So we get a conclusion that the WM6 ROM released
for P3600 is the same as that used in P3600i.
4) The Extended ROM of CHT9110 (or P3600i,
D810x) has write-back design:
I found a way to mount the Extended ROM and
delete all the files in it. Just follow the two steps:
HKEY_LOCAL_MACHINE / System / StorageManger / Profiles / EXT_FLASHDRV /
----> Modify the value of MountHidden from “1” to “0”.
HKEY_LOCAL_MACHINE / System / StorageManger / Profiles / EXT_FLASHDRV / FATFS /
----> Modify the value of EnableCache from “0” to “1”.
Please see cap03. The Extended ROM is totally 9.94MB,
7.51MB in use and 2.43MB free. You can view all the
Extended ROM files in cap04.
After modify the registry, you can delete all the files
in the Extended ROM. If you occur the “ Action Failed”
notification, just try again and then the Extended ROM
becomes 0 MB in use.
(Please see cap05)
You can also try copying some files into the
Extended ROM.
But after a soft reset, the files you put into
Extended ROM disappeared and the original files
of Extended ROM are all written back to it.
5) There is one more different file in CHT9110’s
Extended Rom than CHT9100’s.
PT_Enable_WCC.cab
----> I don’t know what’s the usage of this file
This is very useful information. Can I ask you please where can I find the updated ROM you have mentioned, with the new radio??
---quoted
So currently the only way for us to upgrade to
1.50.08.11
32.83.7020.20H
is to download official upgrade ROM that is with
new radio version.
The latest official WM6 Chinese Traditional version
has updated to radio 1.50.08.11. So I can update
my new Trinity by flashing the entire official ROM.
Does this also mean that the wm6voip.cab wont run on the P3600i?
can you upload the full official p3600i ROM with radio version 1.50 to rapidshare?
also, can you test cpu usage when using stylus, on P3600 there is some issue with this, for example when you play some games and use stylus to navigate frame rate drops considerably, I'm just courious if this has been fixed..
yeah I want to know too
from teh HTC web site I can't find the ROM you mentioned above
A leakage of HTC's download website
SeaPea said:
This is very useful information. Can I ask you please where can I find the updated ROM you have mentioned, with the new radio??
Click to expand...
Click to collapse
I found a method that works currently to download
official WM6 ROM of different languages from HTC’s
website.
I guess HTC might close the download access if they
find the leakage mentioned below.
First, go to the HTC’s worldwide website:
http://www.htc.com/
Select the Region & Language you prefer.
Try to join the membership for free~ choose the way
that doesn’t need any purchased device s/n number.
For example, you select Australia-English.
Choose “Service & Support” --> “Download Now”
--> “Join Now, Go”
Then complete the Join Member Process.
If you choose Hong Kong-繁中(Hong Kong- Chinese Traditional)
or Taiwan-繁中(Taiwan-Chinese Traditional),
just choose “會員專區”(Member District)
--> “加入會員”(Join Membership)
Second, go to the official WM6 download website:
http://hsc.asia.htc.com/e-club/download/login.aspx
Select the language and region you’ve just join a membership.
Then you can see the latest WM6 ROM of that language.
HTC provides this rapid download website to customers
due to that the official websites often got stuck when
the WM6 first released in July.
You can join the membership in the www.htc.com website
then go to this rapid download website to log in and enjoy.
I have log in all the different regions and languages that HTC provided.
Only the Taiwan (Chinese) version has the latest radio
ROM of 1.50.08.11.
As you can see in the shortcuts below.
I wonder if you can use the Taiwan (Chinese) version
since you might not buy the CHT9110 in Taiwan.
Please note that the Hard-SPL, CID unlocker or SSPL-TRIN couldn’t work for P3600i.
Please also note that all the wm6 roms are for d810, p3600 or cht9100.
But until now I can get the cht9100 wm6 rom work perfectly for my cht9110,
nice exploit!!!
here is the direct link to the firmware...
http://210.64.124.194/download/CHT9100_TWN_WM6_Upgrade_20070705.zip
Thks for information, I got CHT9110, and have up to latest ROM, but any one can help that I need to flash to WWE (ebglish) Rom, as mention above Hard SPL,CID unlock or any other utility I search and found here can not help to change the rome to English..waiting for help.
to be frank,i won't buy it
kalechen said:
to be frank,i won't buy it
Click to expand...
Click to collapse
For people who are currently using CHT9100, P3600 or D810,
I suggest them to keep using~
it's not very necessary to change from CHT9100 to CHT9110.
But if you are planning to buy Trinity
or your Trinity is broken or got lost,
you are suggested to buy CHT9110
for the following two reasons.
1) CPU speed is promoted by 25%~comparing under the same brand.
2) The flash ROM is doubled~total 256MB, about 168MB available for storage.
That means you don't have to worry about
not enough space for installing progarms in the future.
4) The Extended ROM of CHT9110 (or P3600i,
D810x) has write-back design:
I found a way to mount the Extended ROM and
delete all the files in it. Just follow the two steps:
HKEY_LOCAL_MACHINE / System / StorageManger / Profiles / EXT_FLASHDRV /
----> Modify the value of MountHidden from “1” to “0”.
HKEY_LOCAL_MACHINE / System / StorageManger / Profiles / EXT_FLASHDRV / FATFS /
----> Modify the value of EnableCache from “0” to “1”.
Please see cap03. The Extended ROM is totally 9.94MB,
7.51MB in use and 2.43MB free. You can view all the
Extended ROM files in cap04.
After modify the registry, you can delete all the files
in the Extended ROM. If you occur the “ Action Failed”
notification, just try again and then the Extended ROM
becomes 0 MB in use.
(Please see cap05)
You can also try copying some files into the
Extended ROM.
But after a soft reset, the files you put into
Extended ROM disappeared and the original files
of Extended ROM are all written back to it.
5) There is one more different file in CHT9110’s
Extended Rom than CHT9100’s.
PT_Enable_WCC.cab
----> I don’t know what’s the usage of this file[/QUOTE]
Any ideas on how to flash the extended rom?
I'm guessing that we'd need to complie a new NBH with the desired programs.
I'm using 3600i , and waiting for cooking rom
craig_shih said:
I found a method that works currently to download
official WM6 ROM of different languages from HTC’s
website.
I guess HTC might close the download access if they
find the leakage mentioned below....
[/B][/COLOR]
Click to expand...
Click to collapse
wow, I got it now. and may consider updating it next time when my system hanged. I just got my HK version P3600i one month ago, and in satisfactory performance. Just see if it is worth the while updating the Radio. But will see.
Thank you very much for this leak....
I can get that rom for taiwan site too
thanks
but I dare not flash it as I want to backup the existing rom first.....
there's no method to backup the rom yet.......
I will keep noticing if someone works out the solution for us. I 'll post it here once the solution come out.
Radio rom with Bouygues
Hi
Someone knows if the radio rom of P3600i works with bouygues an if i can put it on my P3600 ?
Thanks a lot
Any New English ROM and radio for P3600i!!
hi25man said:
Any New English ROM and radio for P3600i!!
Click to expand...
Click to collapse
Are you currently using an English Rom? The Rom and Radio listed in your Signature matches mine exactly. And mine is the AUS WWE Rom. And if that's the case, can the others in this post flash this rom to their P3600i's?
SuperSport said:
Are you currently using an English Rom? The Rom and Radio listed in your Signature matches mine exactly. And mine is the AUS WWE Rom. And if that's the case, can the others in this post flash this rom to their P3600i's?
Click to expand...
Click to collapse
Yes, my Rom is an Engish. I am looking forward to using 6.1 & 6.0 cook ROM
Related
(I am not responsible for any damage you might do to your device using this guide)
I tried flashing with the NoID tool several times, yet it always failed, or my Universal would not boot after the flash.
The regular T-Mobile update utility did work like a charm, and never failed on my. Thus I created a little tutorial on how to convert wrong ROMs to ROMs it will accept.
In this Example I will explain how to use an O2 XDA Exec ROM (and a different radio ROM) on a T-Mobile MDA Pro device
It's easiest to start with a clean directory to do all this as else it can get quite messy.
First, get the HTC64 Extended ROM Tool by Bal666 here:
http://buzzdev.net/component/option,com_remository/Itemid,100/func,fileinfo/id,196/
Next get an original ROM for your device, in my case I used the T-Mobile UK ROM as my device was english anyway.
For example, on the T-Mobile MDA Pro UK (or dutch) version, use "UNI_TMUK_11242_126_10002_Ship.exe" (find it yoursef)
Use WinRAR (http://www.rarlabs.com/) to unpack this file to a new directory called "Original", and unpack it again to a directory named "Converted".
The Original directory will be used to check things, and the Converted directory will be used to store all the roms that we have converted
Next we must find the ROMs we want to flash. I got "Xda_Exec_LaunchROM_v113139.exe" and Unpacked it in a directory named "O2", and "UNI_radio_1.08.00.rar" (from buzzdev.net) and unpacked it into "Radio Update".
First we must find out some things about our original ROMs. For each original ROM in the "Original" directory, follow the next steps:
- Open the HTC64 Extended ROM Tool
- Click Decode
- Open the ROM (.nbf file)
- Write down the values after "Operator Name" and "Language"
- Hit Cancel
Now we must modify the ROMs from the other distributions.
From the O2 directory we will use nk.nbf (OS) and ms_.nbf (Extended ROM), and from the Radio Update directory we will use radio_.nbf (Updated Radio ROM).
For each ROM you want to convert, follow the following steps:
- Open HTC64 Extended ROM Tool
- hit Decode
- Open the ROM
- In "Operator Name" and "Language" fill in what you wrote down earlier
- Hit Decode
- (on the begin screen) Hit Encode
- Open the .prj file you just created (same name as ROM, but with extensio .prj)
- Hit Encode
- if asked "Overwrite existing ROM", choose "Yes"
- if asked "Fat16 file is too large", choose "OK"
- When done, copy the over-written .nbf file from the directory you created it in (like O2 or Radio ROM) to the Converted directory. Choose to overwrite the existing file.
When all is done, run the ROMUpgradeUT.exe in the Converted directory, and follow the instructions.
If all goes well, you should have upgraded your ROM without having to CID-Unlock or use NoID tools that were originally made for another device
If before the actual upgrade your PC says it has found an unrecognized USB Device, close the RomUpgradeUT.exe with task manager (ctrl+alt+del), and reset your device (push the stylus in the hole at the backside). Then re-run the ROMUpgradeUT.exe
Credits go to iruja because he helped me find these tool
Let me know if it also worked on your device
EDIT: Stupid me, HTC64 Extended ROM Tool is by bal666
EDIT2: Note on "Unrecognized USB Device"
EDIT3: Added credits
Nice Job! Good, Clear and informative instructions.
he, leuke guide, die ken ik ergens van
Nice people like my way, this is the same way I test different roms for the wizard, without having to cid unlock the phone and loose warranty
Thank you "TheBlasphemer"
wow, I searched this forum for a few hours trying to understand how to install roms from other developers onto my Universal. It was driving me insane cause i kept on recieving country id errors. I found your post and was delighted to find how easy it really is to upgrade roms. Thank you for helping people like me who have no clue. Thanks, Thanks and More thanks. I also give shout outs to all others in this forum who take time to help others. XDA Developers is awesome! I'm surprised that developer sites dont link to xda developers for their customers. It would save them alot of time and money. Peace
Great Instructions
Many thanks for the great instructions.
I tried to flash my T-Mobile MDA Pro to the latest i-Mate rom and it became stuck in the Bootloader mode (I used the No-ID tool, and tried every type of reset). Fortunately this approach works, and I'm now the proud over of an much faster PDA.
Rom: 1.30.68 WWE 02/08/06
Radio: 1.09.00
Protocol: 42.42.P8
ExtRom: 1.30.153 WWE
The original T-Mobile Rom sucks compared to these i-Mate Roms
http://forum.xda-developers.com/viewtopic.php?t=42743
Excellent
Crystal clear instructions. worked like a charm once I found the Orange operator code is ORANG007. The "Orange" ROM on ftp appears to be a hash of 3 other versions as the operator names are QTEK001 and CDC__ something or other....
Thanks again for the excellent, no hassle upgrade method!
This procedure will be working on MDA Vario (QTek9100) ?
I have a QTEK 9000 that is in Spanish OS. There is no available downloadable shipping ROM so how do i get the values of Operator Name and Language? Are they in the registry=?
Tried this on my MDA pro NL which is stuck in boot screen, but no dice
I used however the init UK rom from T-mobile, not the NL which was my official one. I don't have a NL so I maybe if I use that one, it'll work, but Im afraid not
Viper, I also have a NL version and would like to upgrade my MDA...did you have any luck doing so or did you find the original dutch ROM?
(A stupid question: when I upgrade my rom, i assume that all my data is lost, right?)
Just wondering did you all upgrade your devices with the exe that came with the new ROM, or the one that comes from the phone vendor? :roll:
Kinda wondering should I use the one that comes with the QTek ROM, or should I use the one that came with the Dopod ROM (mine's a Dopod)
wow, how easy was that
the orange updater from the net (M5000_email.exe M5000) creates a temp directory called
\Local Settings\Temp\pft3CA.tmp\
run the orange updater program so it extracts the files, DONT CLOSE IT, leave it at the point where you make it update (don't hit next)
now follow the steps of the OP
simply decode your chosen rom, encode them with the correct info, then overwrite the roms in the temp directory with your required ones
then let the orange app install 'em for you!
took me 10 min to make my radio only to 1.09
hi guys
my MDA Pro dead, only show boot mode. i can't turn on my phone. i'm using all rom files. but no result. please help me how repar my phone. i'm use then solution no result. i can't change my phone lang. detect phone show only empty info. help me pleaseeeeeeeeeeeeeeeeeeee
siemens man??
why that name, do you work for 'em?
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Thank you verry much i'm verry happy with the Qtek-ROM (radio of Dopod 900) instead of the T-mobile rom
And now I have MSN
Im going to upgrade my MDA PRO tonight using the instrutions in this thread, but which is the best ROM to update it to? i suppose i would like push mail and msn messenger/hotmail.
also is there a slightly more stable internet browser in the ROMS? my current IE is not very good, and opera has the habbit of coming up with a not enough storage memory in dll error!
XDA EXEC is dead
I received my xda exec two days ago. I've tried the ROM upgrade as described. ROMUpgradeUT went OK. When I cold boot my device I get two options - Press 0 to restore factory default Press X to exit. Neither have any effect and the exec seems to be dead. Can someone help out or suggest a fix please?
It's alive !!!
Managed to get the exec in boatloader mode, plugged in usb and reflashed it with an original O2 rom, which, thankfully revived it. I still would like to find out what went wrong with the original ROM upgrade and why it 'killed' the exec. I followed the instructions to the letter. My orignal pre-installed ROM was a 1.13.82 (11/30/05), Radio 1.04.02, XROM 1.13.188. I tried to upgrade to JASJAR ME 1.30.82 171 10900 WWE ship ROM, which effectively turned my exec into (I quote) 'a very expensive paperweight'. I now have got it working with an older O2 original ROM (ROM 1.13.48 (09/19/05), Radio 1.04.02, XROM 1.13.139). When I tried to flash I overwrote the 'original' (ROM 1.13.48 (09/19/05), Radio 1.04.02, XROM 1.13.139) with the modified ROM, RADIO and XROM files from the JASJAR version, I didn't replace any dll files. Could this be the problem or am I way off target? Can anyone spot were I messed up here. Tonight I will try with another JASJAR upgrade, now that I know I can safely reflash with an oringal O2 ROM.
anyone know where i can get ROMUpgradeUT.exe tool from?
Is it new rom: http://www.segun.ru/out/9000_WWE_13179_130176_10900_A2DP_MSFP.exe ? Who used it?
is it a real ROM?
I wouldn't want to pick up a compromised ROM, or worse, a virus......
No that is not a NEW ROM, I think that is the missing Jwright's Modified ROM with AKU2 and A2DP support.
cktlcmd said:
No that is not a NEW ROM, I think that is the missing Jwright's Modified ROM with AKU2 and A2DP support.
Click to expand...
Click to collapse
what doyou mean the missing Jwright's ???
indra9110 said:
what doyou mean the missing Jwright's ???
Click to expand...
Click to collapse
It is Jwright's Modified ROM. Follow this thread to find out: http://forum.xda-developers.com/viewtopic.php?t=43992&postdays=0&postorder=asc&start=150
Here is what is in there:
Jwrightmcps said:
Hello Everyone,
Sorry I have been away for a while so my final release was delayed. I was testing the new updated version of my A2DP+MSFP ROM getting it ready for the public release. Well everything is finally done now
I have corrected all reported issues, including full MSFP and A2DP support. I have also packaged my new ROM into a true Windows Installer to make the upgrade process super easy, it will even allow you to choose which updates are installed (OS,Radio,Ext)!
There will now be a version available for each brand of the HTC Universal device. I have already uploaded three of them and will upload the rest later this week. The reason I am making a version for each brand is so we can stop using the “MaUpgradeUt_noID” method, I think it causes problems (killed a device using it).
Since I have written a ROM for each brand please use the correct version for your device as they are all the same base 1.31.79 OS (except for the splash screens, vendor certificates and CID’s). If you don’t see your brand listed please be patient and let me know via private message, I will make it available for the public (HTC UNIVERSAL ONLY PLEASE)
Enjoy everyone!
OS Details:
OS 5.1.195 (Build 14847.2.0.0)
ROM Date: 4/20/06
ROM Ver: 1.31.79 WWE
New Supported Features:
Bluetooth A2DP Support (AVRCP)
Bluetooth Remote SIM Access
MSFP Support (pushmail, remote wipe, system policies)
Click to expand...
Click to collapse
cant install it on jasjar
When I try to install it on jasjar it gives country code error and upon extracting it gives no options. can anyone tell me how to extract it as it will help me to put noID.exe to upgrade it
Re: cant install it on jasjar
rikram said:
When I try to install it on jasjar it gives country code error and upon extracting it gives no options. can anyone tell me how to extract it as it will help me to put noID.exe to upgrade it
Click to expand...
Click to collapse
Read the thread I posted above and you will find the instructions you are looking for. You need to rename some files.
I have a german T-Mobile MDA Pro with the official T-Mobile AKU 2.0 from May 2006. Is there any stable upgrade I could apply to my MDA? Maybe T-Mobile released something officially? I read that there are already Windows Mobile 5 AKU 3.0 and later floating floating around for other brands? Where is the one for MDA Pro?
bitbonk said:
I have a german T-Mobile MDA Pro with the official T-Mobile AKU 2.0 from May 2006. Is there any stable upgrade I could apply to my MDA? Maybe T-Mobile released something officially? I read that there are already Windows Mobile 5 AKU 3.0 and later floating floating around for other brands? Where is the one for MDA Pro?
Click to expand...
Click to collapse
I am currently using the Helmi’s AKU 3.5. If you are new in ROM upgrades, you may choose the Helmi’s AKU 3.3 which is more reliable.
Bdw. MDA PRO is base on HTC Universal (that is the production name)
Bulldog said:
I am currently using the Helmi’s AKU 3.5. If you are new in ROM upgrades, you may choose the Helmi’s AKU 3.3 which is more reliable.
Bdw. MDA PRO is base on HTC Universal (that is the production name)
Click to expand...
Click to collapse
Agree.
Me using Helmi_c Aku3.5 v1.3 too. Performance is great except no speedial!
Also think Helmi_c Aku3.3 v1.2 is the best ROM so far except for not having Windows Live.
Works better with Radio 1.14.10, but depend of your network provider.
What is Radio 1.14.10 ?
And what do you mean with Windows Live? Does some Microsoft AKU contain already some windows live services that where promised for "crossbow" (WM6.0)? What are those? Or is this some ugly homwbrew hack?
errr... , long story, please read,
http://forum.xda-developers.com/showthread.php?t=286036
bitbonk said:
What is Radio 1.14.10 ?
And what do you mean with Windows Live? Does some Microsoft AKU contain already some windows live services that where promised for "crossbow" (WM6.0)? What are those? Or is this some ugly homwbrew hack?
Click to expand...
Click to collapse
radio rom
ftp://ftp.xda-developers.com/Uploads...io_1.14.10.rar
rom (helmi aku 3.5)
ftp://ftp.xda-developers.com/Uploads...KU3.5_v1.3.rar
download both of them and then get back
CWKJ said:
Also think Helmi_c Aku3.3 v1.2 is the best ROM so far except for not having Windows Live.
Works better with Radio 1.14.10, but depend of your network provider.
Click to expand...
Click to collapse
Helmi_c Aku3.3 v1.2 works better with "Radio ROM" ? Can you explain what a radio ROM is for (as opposed to a normal ROM such as Helmi's ROM" ?
bitbonk said:
Helmi_c Aku3.3 v1.2 works better with "Radio ROM" ? Can you explain what a radio ROM is for (as opposed to a normal ROM such as Helmi's ROM" ?
Click to expand...
Click to collapse
I suggest you go to this thread http://forum.xda-developers.com/showthread.php?t=286036 and download the Helmi aku3.5 v1.3. -Its very reliable and considerably faster than what you will have installed already. I strongly recommend that you back up to MS OUTLOOK before updating if you dont wish to lose your calander events or contacts.
To answer your question, the so-called 'Radio ROM' is actually an update of the mobile phone (aka radio) firmware. Helmi's package includes a previous radio firmware version which is fine. The package also includes the latest available firmware upgrade (or AKU) of the Windows Mobile 5 operating system. This firmware upgrade of the OS is not yet officially released by MS, but has leaked and has since been tweaked by such jolly fine chaps as Helmi.
By the way, you'll be quite confused by the mixed use of ROM, extended ROM, hard/cold boot, etc (eg. everyone knows that ROM = 'Read Only Memory' and that the AKU and RADIO upgrades are actually written to EEPROM or equivalent memory type). Dont worry too much about it though, the lingua franca grows on you and the support from the community is excellent
Go ahead and try to update your universal after backing it up.
Your next post should be either "WOW, thats much better!!" or "CRAP, how do I get the damned thing to update??!!"
before I actually go for an upgrade I still have some worries:
1. won't I loose the german language on my phone (keyboard, äöü, T9, UI Language) ?
2. on some screenshots I have seen a "3G" Icon, but in germany it is UMTS and I want to keep the U Icon
3. When upgrading the Radio ROM, will everything still work fine with the operator T-Mobile such as MobileTV, streaming, MMS, Videophonie or this automatic image compression service offered by t-mobile germany (automatically compresses all images on websites to save traffic).
Just to make you feel safe, you can go to your T-Mobile website, download your current ROM from there.
So even how good the new ROM is, if you do not like it, flash back the old one.
can anybody answer my 3 questions ?
bitbonk said:
I have a german T-Mobile MDA Pro with the official T-Mobile AKU 2.0 from May 2006. Is there any stable upgrade I could apply to my MDA? Maybe T-Mobile released something officially? I read that there are already Windows Mobile 5 AKU 3.0 and later floating floating around for other brands? Where is the one for MDA Pro?
Click to expand...
Click to collapse
There is NO official AKU 3 out yet for the Universal. I don't think there will ever be. ALL the AKU 3 you see here are made by members and any Universal device can use them.
bitbonk said:
before I actually go for an upgrade I still have some worries:
1. won't I loose the german language on my phone (keyboard, äöü, T9, UI Language) ?
2. on some screenshots I have seen a "3G" Icon, but in germany it is UMTS and I want to keep the U Icon
3. When upgrading the Radio ROM, will everything still work fine with the operator T-Mobile such as MobileTV, streaming, MMS, Videophonie or this automatic image compression service offered by t-mobile germany (automatically compresses all images on websites to save traffic).
Click to expand...
Click to collapse
bitbonk,
As mentioned there is no official AKU 3.X for Universal.
AKU 3.X ROM’s that you find here are tailored to functionality by some brilliant guys in this forum. Indeed those are generally in English.
However if you choose to use them you will lose your German language but you may able to find batches that allows you to reconfigure. I do also believe your specific T-mobile related functionality will be lost.
in case your decide to give a try for one this available ROM’s then as CWKJ has suggested you can download you current original ROM from T-Mobil for back up
However please take NOTE this forum is for guys they like to test and develop.
I think I am using my universal more for upgrading and testing some ROM’s rather for daily usage. Therefore if you decide start to use one of this ROM’s be prepared to be infected with “XDA developers Virus”. This Virus is not infecting your device but its effecting you live
This will lead you spending most of your free time in this forum and on your device.
Instead bringing news paper to “rest room” you will bring your Universal.
If anyone tries to call you on your device, they will be not able to contact you as device docked on your computer for ROM upgrade or trying any reg. code.
Your Girlfriend/wife will start to complain: “I wish you would love me same as you loving your Universal”
So bro think carefully on what you decide :0)
LOL !!! ...
Good one.
I am trying to get my other half to be infected too.
Read somewhere in this forum, cannot remember which thread, a guy say his girlfriend complaint that he is doing too much ROM. Some other guys in this forum suggest him to give his girlfiend some RAM before continue with his ROM.
LOL !!! ...
So much of joke aside.
This are all self cooked ROMs. Our hardware maker for $ making seek unlikely to give any of us any update (only once in April 06).
1. You will lose the German Language as this is a WWE (World Wide English) ROM. But you can make a search in this forum for a forumer by name Asukal who is an expert in language. You should find some language patch (for read & write) to make up for the missing German Language.
2. "3G" is a "display only bug" in the Aku3.x which should be "U" for Voice service. For Web browsing service or Video, etc, instead seeing "U", you see "G" (a bug too).
3. UMTS/3G using this ROM with Radio image (any version, but latest official T-Mobile is version 1.13.00 and some test version 1.14.10 which seems to work pretty well with this Helmi_c Aku3.5 V1.3) have no problem with Voice Call, SMS, MMS, Video Call, Web browsing, etc. Other T-Mobile specific service (MobileTV, streaming, image compression), I think it should be in your Extended Rom, not Radio. You can just flash nk.nbf (Aku part) and Radio_.nbf (radio part) and do not flash the ms_.nbf (extended rom part).
Lastly, only after flashing, you will get all your questions answer until the day you try it.
Before flashing, backup your T-Mobile splash screen (if any) because splash screen of Helmi's ROM is O2, Indra's is imate, the other 2 I have not tried.
Remember to use MaUpgradeUt_noID.exe, (do not use ROMUpgradeUt.exe), to flash.
Good luck.
thank you for your help.
So maybe there is a e preconfigured ROM/radio upgrade (AKU 3.x) with german language floating around that is known to work well with german t-mobile ? Any german t-mobilers around here?
Why not go into the helmi thread and ask if someone has a compatible german language patch? You can probably set up the T Mobile stuff manually....
bitbonk said:
thank you for your help.
So maybe there is a e preconfigured ROM/radio upgrade (AKU 3.x) with german language floating around that is known to work well with german t-mobile ? Any german t-mobilers around here?
Click to expand...
Click to collapse
You need to upgrade to the WWE ROM first, search got language patch to make the WWE Rom to read German Documents & Write on German Keyboards only.
Radio is language independent
kingdomraj said:
radio rom
ftp://ftp.xda-developers.com/Uploads...io_1.14.10.rar
rom (helmi aku 3.5)
ftp://ftp.xda-developers.com/Uploads...KU3.5_v1.3.rar
download both of them and then get back
Click to expand...
Click to collapse
Can someone please post a link to the radio rom again?
I can't access the FTP from home anymore, I don't know why, it just times out, and I can't access the FTP from work unless I have a direct link to a file, these links are broken
AlanJC said:
Can someone please post a link to the radio rom again?
I can't access the FTP from home anymore, I don't know why, it just times out, and I can't access the FTP from work unless I have a direct link to a file, these links are broken
Click to expand...
Click to collapse
http://rapidshare.com/files/6305686/Universal_Radio_1.14.10.rar.html
So... The WM6 rom is back up on the dopod asia site!!
http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Seeing as I'm downloading at a good speed I'm assuming this hasn't been posted as yet.
A rapidshare copy is now also available:
http://rapidshare.com/files/4681657..._WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
If anyone has any other mirrors please PM me and I will add then to this post.
(PS. Admins, I thought I would start a new thread for this as the old one is up to about 35 pages)
FAQ:
====
Q1: Is This the ANZ Version or the SEA Version:
A1: This seems to be the ANZ version as it is from the ANZ site and the description of the HTC download site is: "D810 WM6 GPS Enabled ROM code for Hutchison ‘3’ and Optus network – version 3.00.707.18"
Q2: I'm having trouble downloading off the HTC link, what should I do?
A2: There is a rapidshare link above, try that. If you are still having trouble PM me.
Q3: What is the difference between this version and the one released a couple of weeks ago?
A3: This is two minor revisions later - This previous release was 3.00.707.16. this is 18. Hopefully this fixed the problem some people were having with upgrading getting stuck at ~30%. EDIT: So far several people are still having this problem.
Q4: Does this ROM fix the TomTom bug involving the device code changing on each hard reset?
A4: According to a post on page 2 it does!
Q5: Is there a new SEA release?
A5: It appears HTC have re-released the same SEA rom with a new date. This seems to make sense as the problem with the original rom was partially related the 3 Australia.
Q6: Will this rom work on devices other than once branded as Dopod d810?
A6: It should, although you will need to remove the service provider lock (SPL) from your device first. Further information can be found here (do some searching and research prior to using this):
http://forum.xda-developers.com/showthread.php?t=299659&highlight=hard-spl
Q7: What is the deal with the languages?
A7: This is the World Wide English (WWE) edition which basically means it is in english. You can install this over a device which is in another language however you device will then be in english.
Q8: Will installing Hard-SPL (see Q6) void my warranty?
A8: Short answer is yet. However, you should be able to switch back to your original firmware etc prior to sending the device in for a warranty repair so you should be able to fool them.
Q9: Does this rom come with office and acrobat etc?
A9: It comes with Acrobat Reader LE and Office.
Q10: Can I read office 2007 files on my PDA with this ROM:
A10: Yes, you need this file:
http://forum.xda-developers.com/showthread.php?t=310832
Note, the link on the original post is dead, have a look at this post for the link:
http://forum.xda-developers.com/showpost.php?p=1402146&postcount=55
Thats all for now folks.
Oh yeah, shameless plug... If you need a theme for your windows mobile device (WM5 or WM6) please visit my website http://www.wm6themes.com You can also request a personalized theme on the site completely free (just upload an image and I'll create a theme for you)!
Work on HTC P3600?
I'm gonna be upgrading my Wizard w/ Faria WM6 on it to a P3600.
Anyone know if this ROM will work on the HTC P3600?
I'm assuming it will as my Wizard is a Qtek and the ROM is from HTC.
Any help would be great.
Thanks
jetlagjoe said:
I'm gonna be upgrading my Wizard w/ Faria WM6 on it to a P3600.
Anyone know if this ROM will work on the HTC P3600?
I'm assuming it will as my Wizard is a Qtek and the ROM is from HTC.
Any help would be great.
Thanks
Click to expand...
Click to collapse
I'm pretty sure it will work if your phone is SP unlocked. (Can't tell you 100% though)
A Rapidshare link has now been added for anyone having trouble with the dopod link. Rapidshare link is located in the original post.
Is this the SEA or ANZ version?
Not sure which it is. I got if off the ANZ site so I assume either they've unified them or it is ANZ.
EDIT: Just copied this of the dopod site so I assume it is ANZ - "D810 WM6 GPS Enabled ROM code for Hutchison ‘3’ and Optus network – version 3.00.707.18"
EDIT2: If anyone does have links to the SEA version please post it here and I will add it to the initial post.
grahamrb said:
So... The WM6 rom is back up on the dopod asia site!!
http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Click to expand...
Click to collapse
This is a repost of ANZ Rom, with radio shipped on ANZ before and some minor change in the OS, probably a bugfix.
Main Changes:
in Application, OEMAPPS
StreamingPlayer
VideoStub
Streaming Video is now called Streaming Media
DLL
In OEMAPPS
Rtsphandler.dll
in OEMDRIVERS
rilgsm.dll
wavedev.dll
Removed CommManagerRes_dll.cab
All the other files seem to be the same: there are 1175 different files but as to me it is due to a new packaging.
The most interesting part, except streaming media, are the two new drivers rilgsm.dll and wavedev.dll
I'm trying to install these different files on my device... wavedev.dll seem to have cause my trinity to stuck at the animated boot screen with sound (a personal hack in the registry). After a soft reset the animated boot screen has been disabled. Rilgms.dll should be related to radio search and roaming switching, and probably is installed to support the new radio shipped. I've radio 1.46.00.11 and can't turn on the phone anymore
All the above is a mine investigation, if you think I'm wrong you can correct me. I'm open to learn more...
Ciao
Carlos..
Are u running this new rom then..
Stai usando questo nuova rom?
Grazie,
itlinux said:
Carlos..
Are u running this new rom then..
Stai usando questo nuova rom?
Grazie,
Click to expand...
Click to collapse
No, just trying to update my lasagna by hand, but it doesn't work.
To see the differences Ive extracted the two roms and made a binary compare between files..
PS: After removing these two dlls my animated splash worked again and my phone too...
Ciao
Is there also a new SEA version. I don't have a Dopod device so my P3600 EMEI does not allow a download.
claros said:
No, just trying to update my lasagna by hand, but it doesn't work.
To see the differences Ive extracted the two roms and made a binary compare between files..
PS: After removing these two dlls my animated splash worked again and my phone too...
Ciao
Click to expand...
Click to collapse
so is it working now? you made the update? Since I have the TIM version of the phone will this work? Thanks and btw, which two dll are those that need to be removed...
itlinux said:
so is it working now? you made the update? Since I have the TIM version of the phone will this work? Thanks and btw, which two dll are those that need to be removed...
Click to expand...
Click to collapse
No, i din't made the update and you don't need to remove any dll.
If you want you can install it, if your device id supercid. But probably you will not found any difference from the one you are using, apart from streaming media that i've never used...
Ciao e buonanotte, mi è passata la sbronza e vado a letto...
I cannot find a new SEA rom. They changed the ROM date in the website - D810 WM6 English Version Upgrade code (2007/07/10), but if you try to download it goes to the same file - D810_SEA_WM6_Upgrade_20070709 - released before.
Fixes TomTom bug and works on UK Orange SPV M700
Hi all,
Having installed this ROM last night, I just thought I would let you all know the following:-
1. It FIXES the TomTom bug/incompatability whereby the Device Code keeps changing each time you Hard Reset! For me, this is *the* MOST important fix.
2. It works perfectly on the UK Orange SPV M700 version of the Trinity. In fact, there is no need for SuperCID or any of that lark, just unlock the phone from Orange (using the sticky thread in the Trinity Upgrading forum) and away you go. My advice is to press the Reset button right at the end of the initial date/time/screen alignment setup to stop it installing the Extended ROM.
3. This is the ANZ (Aus/NZ) version of the ROM, but it IS WWE (World Wide English)
I've only been running it and using for a few hours, but currently, all seems good. Definitely worth trying I'd say.
Regards, Moz.
I've tried it several times now, but somehow can't get past the 28% mark.
Tried all the unlock tricks...
Somebody a suggestion ?
Vilem said:
I've tried it several times now, but somehow can't get past the 28% mark.
Tried all the unlock tricks...
Somebody a suggestion ?
Click to expand...
Click to collapse
First flash with this one..
http://rapidshare.com/files/42190781/D810_SEA_WM6_Upgrade_20070709.zip
tukan said:
First flash with this one..
http://rapidshare.com/files/42190781/D810_SEA_WM6_Upgrade_20070709.zip
Click to expand...
Click to collapse
What's the difference ?
Vilem said:
What's the difference ?
Click to expand...
Click to collapse
After this step you can flash the "NEW Dopod d810 WM6 ROM" without the 28% error.
I got several questions:
1. Can I also install it on a P3600 with German language (I know that it is in English then, but that´s better anyway)?
2. My Triny is not branded (bought from Amazon). This won´t be a problem?
3. Is it branded then, because it´s a Dopod Version?
4. Can I still install German programs like the German Tom Tom or Langenscheidt Dictionaries or do I need new versions for WM6 and/or the English BS?
5. Is a English PDA compatible with German Outlook
6. Is also Office Mobile, Acrobat etc. onboard?
7. Will I loose my guarantee?
8. Can I go back to the official German WM5 in case of Problems?
9. Can I use this Update straight from my Vista PC or do I also need to change some dll´s?
10. Are any functions like European 3G etc. disabled, when installing this Australian version?
11. When the update stucks at a certain %, can I still update the other rom to use this update later or do I have a problem then?
Please, forgive me that I post so many questions.
Thank you so much for your answers.
Ok i removed ipl and spl from this rom , changed spash screens and flashed with customRUU.
Working fine so far.
Hi guys, I have an HTC Diamond P3700 (DIAM110 64M) and I cannot install any of the HTC 2.03 official roms. I already ran OLIPRO unlocker (dev Hard SPL, Sim Unlock, Security Unlock). I'm trying to run any of the official 2.03 ROMS (tried europe, ME, hong kong) but nothing works. I CAN flash any cooked rom (running AZTOR v10) but I still would like to know how to install any official 2.03 ROMS.
I get the always handy error 244 invalid model ID so it makes me think of invalid region ID issue.
Any pointers greatly appreciated.
You answers will most likely be found here....
http://forum.xda-developers.com/showthread.php?t=409425
Update stops at 5%/Invalid Model ID is displayed
Short answer: The model ID hardcoded in the ROM image doesn't match the ID of your device. Read on for a fix.
Long answer: Don't Panic. Your Device isn't broken
Each Diamond Model has it's own ID. My German MDA Compact IV is a DIAM200. Other models are DIAM150/DIAM300/DIAM100....
Now ROMs might be configured to be flashable to a specific Model ID only, even though technically they would work fine on any Model ID.
In that case the ROM needs to be "reconfigured" - this process works for full ROMs as well as Radios.
* If you are running a foreign Version of Windows or have Regional Settings other than English US configured, please set them to English U.S. temporarily. Otherwise NBHUtil will not function correctly.
* First you'll need OliPro's NBH Util (0.92 works for the Diamond).
* Fire it up, switch to "Extract NBH"
* Select the nbh of the ROM/Radio to be flashed and hit Go
* Extract the components you need. Radio/Splash/OS. If there's an SPL in there, you can safely discard/ignore it. You have HardSPL for that.
* Make note of the Target CID, Version, Language and Chunk Size. FYI the Model ID is the problematic setting here. If it says DIAM10000 and you have a DIAM300 you're screwed.
* Switch to the Build NBH tab and select the Diamond as target
* Note how the Model ID is preset to DIAM*****. The wildcard allows any device
* Change target CID, Version, Lang & Chunk size to the values you wrote down.
* Select each saved component under the NBH items
* Hit Build NBH and save the file as RUU_signed.nbh to a folder of your choice and flash it with the DiamondCustomRUU.exe or ROMUpdateUtility.exe
* Donate to OliPro because he just made your device useful
This is not the case
Update process stops at 1%. I already read that forum at usually you would think of HARD SPL issues, but not. I can flash cooked roms (I'm running AZTOR v10). That's why I'm thinking of region ID protection.
hmm....yes, yes, perhaps.
Ok, well I will see if there are any other post on this outside of this forum.
davidsle said:
Hi guys, I have an HTC Diamond P3700 (DIAM110 64M) and I cannot install any of the HTC 2.03 official roms. I already ran OLIPRO unlocker (dev Hard SPL, Sim Unlock, Security Unlock). I'm trying to run any of the official 2.03 ROMS (tried europe, ME, hong kong) but nothing works. I CAN flash any cooked rom (running AZTOR v10) but I still would like to know how to install any official 2.03 ROMS.
I get the always handy error 244 invalid model ID so it makes me think of invalid region ID issue.
Any pointers greatly appreciated.
Click to expand...
Click to collapse
that error is nothing to do with regionid
however if you flash a rom with high regionid protection, and your device is not from matching region you have to patch the rom, for older roms in 1 place, for newer ones in 2 places. I can give more info if anyone requests it, also I made a patcher for nk.exe (1st patch is in nk.exe), that does it automatically
PS: I noticed you mention mainly english roms. well, english language roms usually never have it. russian and chinese language roms tend to have this
davidsle said:
Update process stops at 1%. I already read that forum at usually you would think of HARD SPL issues, but not. I can flash cooked roms (I'm running AZTOR v10). That's why I'm thinking of region ID protection.
Click to expand...
Click to collapse
probably these roms are DIAM100**
your diamond is DIAM110 so you want a rom with DIAM110** or DIAM***** modelid
cooked roms are usually DIAM***** and stock roms aren't.
so do what band27 said.
is there a prob if my model id is DIAM100 and nbh [email protected] extract nbh i get DIAM10000?
i get this model id from the nbh @ the official ROM downloaded with my sn
cmonex said:
that error is nothing to do with regionid
however if you flash a rom with high regionid protection, and your device is not from matching region you have to patch the rom, for older roms in 1 place, for newer ones in 2 places. I can give more info if anyone requests it, also I made a patcher for nk.exe (1st patch is in nk.exe), that does it automatically
PS: I noticed you mention mainly english roms. well, english language roms usually never have it. russian and chinese language roms tend to have this
Click to expand...
Click to collapse
I am really intresting in it. Can you tell me the detail about how to patch nk.exe and rilphone.dll to remove the region ID protection? THX