PLEASE HELP!!! I WAS TRYING TO DO SIM UNLOCK BUT FOUND OUT MY O2 XDA II HAS OLD ROM VERSION SO I HAVE TO UPDATE NEW ROM VERSION. BUT IT FAILED IT SAID DO A HARD RESET AND REPEAT THE PROCESS. NOW MY XDA II JUST A BLANK SCREEN WITH THE WORD USB V1.1 NOT THING ELSE. IT WON'T TURN POWER ON. WON'T DO ANYTHING. PLEASE HELP MANY THANKS IN ADVANCE. REGARDS,
You're in the bootloader now & I suppose the USB cable is still connected to your PC. Leave it this way & restart the rom-update program.
Regards, M
Related
Can anyone help me please ??
I have been scouring this site and many others for hours now and I still am not sure what to do. I tried upgrading my rom and radio on my O2 xdaii via the 02 site. During the process the programme crashed. Now while the XDA is in its cradle it wont charge or register on Async. The screen simply reads USB at the top and v1.01 at the bottom and when out of the cradle SERIAL at the top and v1.01 at the bottom. Have tried all various types of resets but it just keeps coming back to this screen. Is there any hope at all !? when i try to upgrade it using the latest ROM, it says device not recognised, try downloading the correct ROM from the support site and try again, Can someone suggest me a solution for this problem? Thanx in advance
Hi...
put ur device in cradle,u'll see USB on top of ur screen,then restart the update process....
Good luck..
RAGO :lol:
wiki
go to the wiki.xda-developers.com page and read up about how to upgrade, don;t worry it is not dead, just waiting to be fed.
i was installing new rom on my device.when it was 12%, the computer got locked and i had to reset.Now,my baby did not reflash again.i tried again but himaupragadeutility gave : communication problem. what can i do now? can anyone help me? so a few people know this device, the others even do not know what pda is. what i can do?????????????????????????????
keep on doing a hard reset until you reach bootloader mode. from there try upgrading again. were you upgrading to 2003se or wm2005?
i was installing the rom from 02 web site
i was installing the rom from the 02 web site.i had tried but it did not open boatloader.what i can i do?
anything showing on your xda screen? if it's blank then you have to continue doing hard resets. a buddy of mine had the same problem and he was able to bring it back to bootloader mode after 10 or so hard resets.
if something is showing on the screen (like "usb version...something") then this is already bootloader mode. what you do is put the xda back on the cradle but don't expect activesync to recognize it. just put it back on the cradle and then rerun the upgrade.
hope it works.
rob
there is only o2 logo on the device,i tried hard reset but it did not open boatloader
Please, please help... During an O2 rom upgrade my xda IIs suddenly rebooted and now it is stuck in bootloader mode. I have worked out there is no rom left in the phone.
I have tried evrything I could search for in the forums but I get the dreaded error 101 whenever I try to re run the o2 upgrade. It seems the xda won't connect to anything.
ANY suggestions would be appreciated
Read Wiki
Especially for the No Operator Updade files, that might hepl you.
ok then...wish me luck
hi hope someone can help me.i tried updati ng my xda exec after downloading the rom update from o2, and now my pc doesnt recognise the xda and my xda doesnt start its gone completely bank.i tried holding the softkeys and pressing the reset button, it says hit 0 to get back to factory settings and nothing happens........please it looks like my phones gone comatose
Moved to Uni Upgrade forum form Upgrade general
i believe u r stuck in bootloader
hi
try the following
disable usb connection from connection settings in active sync
then re upgrade the rom , and when you reach the screen where it tells u the rom version (it wont tell u this time) u ll HAVE to wait for few seconds before pressing "upgrade" , hopefully it will work this time
good luck
hi
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
Does anybody have a solution to the above problem as I now have 2 xda execs in the same situation. It's a bloody nightmare! I understand it's in bootloader mode. Just don't know how to get the xda up and running again without sending it off to O2...
Please help!
LOOK HERE I have been in this situation myself a couple of times. Personally I use method 2 which is at the bottom of the page as it's very easy to follow. I suggest you try this method first.
Regards,
Psi
Those of you having trouble after a Rom Flash. If it goes wrong, start by pressing THE BACKLIGHT BUTTON, THE POWER BUTTON AND PRESS IN TO THE SOFT RESET HOLE ALL at the same time. This should put you back into BOOTLOADER. Then try your rom flash again. If the WM6 fails I re-flashed with the O2 EXEC WM5 first. Forget Active Synch saying it cant etc.
Providing you can just see some very faint words then you are back in bootloader. I have got the original O2 XDA EXEC WM5 Rom files so if you want them, as I can not find out how to put a large zip file on here then I can email it to you. Let me know on
[email protected]
pls i need it send to [email protected]
Hi Guys,
I tried to flash the o2 rom from buzzdev.net (latest one). All went well, but when I tried to do hard reset it comes back with the usal white screen (0 to restore defulat and x to exit). When pressing 0 the screen turns into garbage. Have I bricked my phone or can I save it? Please help ...
Thanks
my xda not working after installing O2 xda rom from buzzdev.net - FIXED
Sorry guys I panicked.
I had the problem, and then I followed some instructions on this forum, you have to press the light button plus the back light to get into bootloader and reflash. But it won't wokr on mine. Then I found out cause the usb cable was connected to the monitor (monitor has 2 usb ports connected to the laptop). Once I connected directly to the laptop I was able to get into the bootloader and reflash Phew ... Nearly had a heart attack. Perhaps someone else will learn from this.