Can anyone help me please ??
I have been scouring this site and many others for hours now and I still am not sure what to do. I tried upgrading my rom and radio on my O2 xdaii via the 02 site. During the process the programme crashed. Now while the XDA is in its cradle it wont charge or register on Async. The screen simply reads USB at the top and v1.01 at the bottom and when out of the cradle SERIAL at the top and v1.01 at the bottom. Have tried all various types of resets but it just keeps coming back to this screen. Is there any hope at all !? when i try to upgrade it using the latest ROM, it says device not recognised, try downloading the correct ROM from the support site and try again, Can someone suggest me a solution for this problem? Thanx in advance
Hi...
put ur device in cradle,u'll see USB on top of ur screen,then restart the update process....
Good luck..
RAGO :lol:
wiki
go to the wiki.xda-developers.com page and read up about how to upgrade, don;t worry it is not dead, just waiting to be fed.
Related
i was installing new rom on my device.when it was 12%, the computer got locked and i had to reset.Now,my baby did not reflash again.i tried again but himaupragadeutility gave : communication problem. what can i do now? can anyone help me? so a few people know this device, the others even do not know what pda is. what i can do?????????????????????????????
keep on doing a hard reset until you reach bootloader mode. from there try upgrading again. were you upgrading to 2003se or wm2005?
i was installing the rom from 02 web site
i was installing the rom from the 02 web site.i had tried but it did not open boatloader.what i can i do?
anything showing on your xda screen? if it's blank then you have to continue doing hard resets. a buddy of mine had the same problem and he was able to bring it back to bootloader mode after 10 or so hard resets.
if something is showing on the screen (like "usb version...something") then this is already bootloader mode. what you do is put the xda back on the cradle but don't expect activesync to recognize it. just put it back on the cradle and then rerun the upgrade.
hope it works.
rob
there is only o2 logo on the device,i tried hard reset but it did not open boatloader
hi hope someone can help me.i tried updati ng my xda exec after downloading the rom update from o2, and now my pc doesnt recognise the xda and my xda doesnt start its gone completely bank.i tried holding the softkeys and pressing the reset button, it says hit 0 to get back to factory settings and nothing happens........please it looks like my phones gone comatose
Moved to Uni Upgrade forum form Upgrade general
i believe u r stuck in bootloader
hi
try the following
disable usb connection from connection settings in active sync
then re upgrade the rom , and when you reach the screen where it tells u the rom version (it wont tell u this time) u ll HAVE to wait for few seconds before pressing "upgrade" , hopefully it will work this time
good luck
hi
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
Does anybody have a solution to the above problem as I now have 2 xda execs in the same situation. It's a bloody nightmare! I understand it's in bootloader mode. Just don't know how to get the xda up and running again without sending it off to O2...
Please help!
LOOK HERE I have been in this situation myself a couple of times. Personally I use method 2 which is at the bottom of the page as it's very easy to follow. I suggest you try this method first.
Regards,
Psi
Those of you having trouble after a Rom Flash. If it goes wrong, start by pressing THE BACKLIGHT BUTTON, THE POWER BUTTON AND PRESS IN TO THE SOFT RESET HOLE ALL at the same time. This should put you back into BOOTLOADER. Then try your rom flash again. If the WM6 fails I re-flashed with the O2 EXEC WM5 first. Forget Active Synch saying it cant etc.
Providing you can just see some very faint words then you are back in bootloader. I have got the original O2 XDA EXEC WM5 Rom files so if you want them, as I can not find out how to put a large zip file on here then I can email it to you. Let me know on
[email protected]
pls i need it send to [email protected]
Hello, i upgraded my spv m5000 via orange site. during the upgrade the setup gave me an error and went off. and now my screen of the spv m5000 is stuck on the installation screen. i.e. saying Serial on top of the screen and V1.00 at the buttom. ive tryed resetting the phone but nothing happens.
and now my battery is dead and it only charges a bit and the same screen comes up
Ive contacted orange about a month ago now and they dont know what to do as they dont understand the issue also took to the shop no help recieved.
please tell me what i have to do to get my phone up and running.
thanks
skemeone said:
Hello, i upgraded my spv m5000 via orange site. during the upgrade the setup gave me an error and went off. and now my screen of the spv m5000 is stuck on the installation screen. i.e. saying Serial on top of the screen and V1.00 at the buttom. ive tryed resetting the phone but nothing happens.
and now my battery is dead and it only charges a bit and the same screen comes up
Ive contacted orange about a month ago now and they dont know what to do as they dont understand the issue also took to the shop no help recieved.
please tell me what i have to do to get my phone up and running.
thanks
Click to expand...
Click to collapse
try racharge you batery using external charger... than put your device to boot loader mode (serial on top & bootloader version bottom) than try to flash again
cheers
indra9110
yes its already on boot loader mode and i am unable to go off it. also i am unable to charge the battery with the external adapter.
Is there any software that can be used to flash without using active sync cause it has developed its own usb connection.
its always saying serial on top and V1.00 at the buttom
thanks for quick reply.
skemeone said:
yes its already on boot loader mode and i am unable to go off it. also i am unable to charge the battery with the external adapter.
Is there any software that can be used to flash without using active sync cause it has developed its own usb connection.
its always saying serial on top and V1.00 at the buttom
thanks for quick reply.
Click to expand...
Click to collapse
as I say ... just flashing again on bootloader mode ...
cheers
indra9110
with what software
please tell me
cheers
i have retryed my upgrade software but as i do not have active sync connection i am unable to install via software. please let me know which software you are taking about.
You dont need active sync for upgrading your ROM. When the device is in bootloader (and yours obviously is ;-), connect it to a pc through the usb cable and run the upgrade utility from the orange site again. Sometimes it takes two or three times.
hello, THANKS A LOT. YOU HAVE EXPLAINED TO ME EVERYTHING THAT EVEN THE COMPANY ORANGE COULD NOT DO..,
Your da true expert in this device.
Thank you every much.
all of you that have reply thank you very much
i have an error 120 when i am trying to install rom. and it is stuck in the bootloader.
top of screen has usb and at the bottom has v1.00. I cant seem to go anywhere from here.
please can someone help me i am pulling my hair aout and i dont know what i am doing as i have never been in this situation.
please help me.
DNY80 said:
i have an error 120 when i am trying to install rom. and it is stuck in the bootloader.
top of screen has usb and at the bottom has v1.00. I cant seem to go anywhere from here.
please can someone help me i am pulling my hair aout and i dont know what i am doing as i have never been in this situation.
please help me.
Click to expand...
Click to collapse
Have you completly READ the Wiki?
I´m sure you can find the way to solve your prob there
Good luck
My O2 Exec Got Name Blinking Problem
Hi Frnds
My O2 Exec Not Working Properly...
When I Open Any Folder Or Something The Names Automatically Started To Blink.
My O2 Got Blinking Problem.
Is It Software Problem
I Had Done Hard Reset...but Problem Remain Same
What To Do??
Solve It Out Frnds....
Help Me
Thanks In Advance
DNY80 said:
i have an error 120 when i am trying to install rom. and it is stuck in the bootloader.
top of screen has usb and at the bottom has v1.00. I cant seem to go anywhere from here.
please can someone help me i am pulling my hair aout and i dont know what i am doing as i have never been in this situation.
please help me.
Click to expand...
Click to collapse
GO TO OFFICAL O2 WEB SITE
If you are using Vista, do it on an XP machine. ALL of my problems went away when I updated on an XP machine.
If this is not the case read the WIKI, it takes time but you will eventually get your head around the whole situation.
One last thing, do not give up. Keep trying you'll get it!!
Hi I have and IMATE PDA2k EVDO and I tried a d-two rom and I now have the device sitting on the 4 color screen every time I reset it. Any idea how I reset it back to defaults so I can load another image onto it, I have the original image. any advice would be appreciated.
Thanks,
Actually I just fixed it.
Anyone know of any WM5,6 or 6.5 roms that work on this phone. The EVDO network is dead here in Australia so I just want to convert it into a PDA.
For the love of God... if you are going to make a thread saying "Hey guys, I broke this, how do I fix it?" Do not EVER update with "I fixed it!" without telling us HOW you fixed it.
I thought it was such simple fix it did not requiere explaination. To enter the bootloader you do the following
Press Power + record (above the volume slider) + softreset at the same time.
This puts it into the load mode so you can reflash.
problem with my xda iis
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
about WM 6 rom, maybe you can look at ftp://ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/
or at http://shipped-roms.com/index.php?category=windows mobile&model=Blue Angel
try to flashing rom again
You sir are an idiot.
A Blue Angel rom will not work for a Harrier.
So delete your comment because some other idiot will follow your bad instructions then **** up their phone and make another idiotic post.
Yea so did anyone figure out this whole problem with the white boot loader screen? I'm no where near a programmer or anything but I think my boot loader version is out dated. My HARRIER, not blue angel, is stuck at a white screen that reads Serial(USB when connected to usb of course) and v1.02. I've had a Harrier before this and it had the four color screen for boot loader. Am I on to something here?
Oh btw I already tried to reflash the rom over and over but updater keeps saying it can't connect.
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
I have the same problem, anyone found a fix?
yes I have too same problem..plz help
i have a problem
Obviously.
But which one?
Tell us as elaborate as possible.
Problems Blue Angel Harrier Alpine
B-44 said:
Obviously.
But which one?
Tell us as elaborate as possible.
Click to expand...
Click to collapse
Please be careful: This is a Blue Angel (BA) Thread!
As Hima and Alpine Fora are closed, i will try to help as well as possible,
but please post marked "off topic"- hope moderators won't intervene...
And always first work out which device you're talking about.
Still love Alpine...
@admin: I know it's quite impossible to keep all these legacy threads alive- but what about some rescue thread, e.g. for non-touch-screen-phones,the Hima-BA-Family?
As i know from Siemens/BenQ Phones, it has gone silent around here, but from time to time some collectors appear which shouildn't be left alone.