Related
O2 Stealth stuck on welcome screen how to bring on boot mode i tried to hardreset also but it dosent restore also
isthere any way to bring on boot mode
get the ROM for stealth, and press Start Menu+OK button+Soft Reset after putting ROM on the SD Card...it will start flashing yr device.
i had downloaded the rom from the official site its a setup file so how do i put the rom update in SD card
how do i flash rom with SD card i had downloaded the rom update from O2 official site
the rom is in exe file
Hi
pls read the FAQs for upgrading at seeO2.com
same problem with my stealth also
problem solved with hard reset,
not want to flash it, only hard reset solve ur problem,
get the ROM for stealth, and press Start Menu+OK button+Soft Reset after putting ROM on the SD Card...it will start flashing yr device.
hello friends
when i tried to upgrade my o2 xda zinc it rom erased and now it show only eboot
screen.
just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
i tried soft and hard reset and no effect
all o2 zinc upgrade software are working with active sync and available os and i cant use them
pleas help me
how i can install new rom (wm5 or 6)
tnx
I've the same problem!
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
Can someone help?
TIA
I updated my rom from the original spanish version to a Artemis_Touch_3.01
After some use, the device is blocked.
It starts the HArd reset, after "Format messages" It starts HTC white screen
IPL 3.13.0001
SPL 3.13.0000
and nothing more
.
It also works ROM update mode (Three colors screen) but when I execute the Rom update frommy pc, it reaches 2/3% and gives different Errors depending the ROM,
"Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
ERROR [270]: Update Error -The Image File is corrupted - When I use Black & Blue 4.3 or Artemis_Touch_3.01
I need help!!!
brick?
hello,
First you must open the bootloader menu,
hold voice dial button and press soft reset.
If this not working hold voice dial and on/off button and softreset.
You must connect first your htc with your pc and the start the bootloader.
When you are in the bootloader menu, you can upload an orginal fabricrom to your htc.
Search xda-developer for the fabric rom.
And then you can change your rom for something else but don't forget the uspl.
When you want to change image you must install the uspl first otherwise everthing will blocked
the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick
uspl does not work. this is the point you can not get it.
have a problem but I cannot find anything useful for my case, maybe you can help me?
pvdhelm said:
the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick
Click to expand...
Click to collapse
Hi Patrick,
I have a dutch rom on my htc P3300
IPL: 1.12.0001
SPL: 1.12.0000
GSM: 02.67.90
os: 1.12.0.0
my HTC remains stuck on the startup screen (logo HTC) and will not get any further.
Connection with active synch is not possible, ans holding the buttons reset-voice rec-on/off buttons don't react. WM cannot be started in that way.
is it possible to find a boot program which allows me to start up WM again like a regular PC? something like a emergency startup disk? I have a 2GB micro SD card. After reading and trying so many things, I lost the way in this site and was hoping maybe you can send me some useful links that can solve my problem? I would appriciate the effort.I don't know if it's allowed to send my personal emailadress? If it is allowed please let me know. Maybe we can exchange directly some info, otherwise I don't have a problem mailing this site.
(I hope I can find this thread again after closing?)
Kind regards , Eli
my artemis is also in the same state
Hi All,
Please help me with problem which I am facing with my HTC P3300
When i switch it on..Its stuck in the state where it shows
IPL 3.07.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.4.0.0
What I tried.
1. I tried USPL , its not loading as device is not getting detected in my laptop.
2. Volume Down+Reset is not working
Please help me with this
Hi I have done a search on the existing thread but can't find any relevant topic (for aussie).
I have a dopod 838 pro current using Black 3.0.1
IPL 1.04
SPL 2.03
I have decided to flash the ROM back to the official 3 network WM6, so I downloaded the RUU from 3 network website, and run the RUU. It works fine until it booted the phone into bootloader mode, and it just won't continue anymore (no memory card in the slot) The error message is saying it can't detect my phone (well activesync doesn't recognise the phone in bootloader mode anyway).
So I un-packed the RUU, renamed the NBH file to Heraimg and put it to my microSD. however my phone (while in bootloader mode) doesn't detect the microSD card.
can anyone give me a hint here?
Another Rom for Artemis italian user.
This is a new way of install ROM and can be installed ONLY if you have a Micro SD with almost 30 Mb free space.
In Rar archivie there is the nbh file (the Rom) and a file called "Setup".
1. Copy file "Setup" in your SD
2. Flash the rom (remember you must have SPL unlocked).
Don't delete Setup from SD: it's impostant if you make Hard Reset.
Core wm: CE 5.2.1620 (Build 18124.0.4.2) from original HTC WM6 Professional Ita
SplashScreen
SHDC e GPS Photo ready
.........and more.
Italian user can read more on this forums: A1Ktyle - SoloArte
LINK DOWNLOAD RAPIDSHARE
Thanks mate, testing your great work, bye
P3300
My HTC3300 was dead, only can load into Three-color Mode with USB avaliable. I tried all kind of RUUs, including the Original ROMs(English, French, Deustch....)and the newest version , all report ERROR[300]invalid update tool. then the screen of phone stayed in 0% and RUU tool exit only...
IPL 1.27.0001
SPL 1.11.0000 (used the USPL to unlock CID before)
Before Bricked, I successfully updated many versions of ROM, and the last operation is WM6.1.
I'have try this with MTTY:
Cmd> set 32
Cmd> password BsaD5SeoA
Cmd> ruurun 0
Cmd> ResetDevice
But Doesn't work!
because of you!
My phone was perfect before and I have installed your BigiX.
What I have to do? Can U help me?
I can donete some money... pls... help me....
My dear friend,this is an old rom.
But this is not the reason of your problem.
I don't know if MTTY works on this device, but if your screen show 3 colors you are in bootloader mode (and your SPL is 1.11.0000 as you tell, so it is good for flash any rom).
So (in teory) you can connect PPC to PC via USB and run RUU for flashing the rom you want.
In alternative you can flash original rom.
For this operation i suggest Win XP+ AS 4.5 and try to change usb cable (a new one) and usb port (another on your PC)
I hope you can resolve.
No need donate money
Thx, but are 3 days that I'm looking for solution... Lot of people have the same problem. When run RUU flashing after 3 colors bar, the phone start to flashing but is stopping at 0% and the software report ERROR[300]invalid update tool.
I can connect only with MTTY but I'm looking fore some command that can force to send RUU at the fone. For example "send" in telnet. But nobody know how to do this...
If someone have an idea, lot of people will be very very very happy!
And hope gratful
You can try with rom flash from SD card...
Are you italian??
You can found all the info in this website -> Clic here!!!
Yes, I'm Italian.
I'll post this question to that site.
But I think that is possible to force installation of RUU with MTTY.
My problem is that when I have used start_uspl.exe at blank screen was blocked and I have removed battery.
After this my phone is blocked with 3 colors bar and when I try to update, it start but only at 0%
I need to know all MTTY commands
I don't know if MTTY work with P3300, try with the flash from the SD card directly from the device...
This is the link of the discussion...... Click here!!!
Try don't cost anything....
obviously I have try a lot of times... But doesn't work!
I have try to rename in ARTEIMG.nbh and in a lot of different name but when I powe the phone it say Checking SD contents but nothing happen....
I would like to find a command to force reading of SD and writing to the Phone... but I think is not easy...
Thanks whatever....
Do you try with another SD card?
This procedure is the same that the HTC Service use for repair the HTC device...
Try with another SD card... I have a Kingston 2Gbyte and it work very fine!
I hope your Artemis revive very soon!
I have only 2 SanDisk SD cards. One of 128Mb and one of 2GB.
I have tryed with both. With Fat16 and Fat32 but nothing happen...
Sorry for your problems Pinco, I don't have a solution for that but i can strongly recommend another ROM from the great BigX, the one you can see in my signature. OS core seems to be more recent and ROM's almost perfect If you don't have any specific need to use the 2.0, go for Blue-X!
help error 300
what happend any there have solution for this prob