New Rom for Universal & TomTom Go 500 - JASJAR, XDA Exec, MDA Pro Software Upgrading

Just upgraded my iMate Jasjar (Universal) to the latest version that's just come out.
So far all working well.
Just paired my Tomtom Go 500 via BT with it again and now able to transfer phonebook across to TTG. Was not able to before.

EXCUSE ME???
i can't see any update on the JASJAR site...
which one are you talking about??
can anybody else confirm if there is a rom update for JASJAR??

Have a look at the thread in this forum.
http://forum.xda-developers.com/viewtopic.php?t=42743
It works ok on my Jasjar.
I took the advice and replaced the radio file corupted Radio file with one of the good one's.
I left my simcard & sd card in while updating, no problems. So far.
Works better.
Says it's a test but it works.

Related

02 XDAII Extended ROM - WM2003SE

I upgraded to WM2003SE a while back and at the time had an Orange SIM in my XDAII and my 02 SIM in my E200 Smartphone. The extended ROM I used was Orange specific and contained all the necessary GPRS Configs etc
Anyways, I've now got a C500 with my Orange SIM in it and so the 02 Sim is back in my XDAII and I'm looking for a good External Rom dump that contains the UK 02 GPRS/WAP/MMS Configs etc and is compatible with WM2003SE.
Can anyone point me in the direction of one, I have looked and tried one or two but none have the correct configs for 02's GPRS service (Pay monthly not PAYG).
TIA
Did you get anywhere with this, Darren? I'm just wondering whether to upgrade my O2 XDAII to WM2003SE but the lack of dedicated O2 Ext.rom files (as far as I can tell) is putting me off.
I didn't but don't let that stop you, the SE upgrade is well worth it. I just removed all the O2 specific rubbish from the Ext ROM and it's fine.
Thanks for the reply.
I'd love to upgrade but without the O2 auto-config software in the ExtROM I wouldn't have a clue where to start configuring all the network, SMS, MMS etc settings for O2 pay monthly. Do you know of a guide or something somewhere?
Secondly, I searched earlier to try and find out which was the best ROM to use for those of us in the UK, but there didn't seem to be a definitive answer. Would you mind telling me which ROM you used and where you got it from if you're happy with it? I need Bluetooth headset, BT GPS, BT ActiveSync, speakerphone to work perfectly to consider upgrading. Currently my XDAII works like a charm with ROM 1.72 but some people seem to have had trouble with the SE upgrade and Bluetooth.
Thanks a bunch in advance.
I use all those BT functions alos, I used the 2.02 ROM available at the beginning of this thread.
I've left the auto config files in the Ext ROM so there is no need to manually configure anything. I have had zero issues with it since the upgrade I'm happy to upload my Ext ROM to an FTP if you want it?
The only critical noe I found was to remove the 'TPDisable' entry in the Ext ROM when performing the upgrade as you receive a lot of 'This isn't designed for WM2003SE' messages and with TPDisable enbled you can't click OK!
griffog said:
I use all those BT functions alos, I used the 2.02 ROM available at the beginning of this thread.
Click to expand...
Click to collapse
Forgive me if I'm being a bit fick, but I can't see where you mean. Have you a ROM available through your pocketgpsworld.com website? Or is there only one 2.02 ROM available and I can download it from this site's FTP? I thought the 2.02 ROM was the Chinese one.
griffog said:
I've left the auto config files in the Ext ROM so there is no need to manually configure anything. I have had zero issues with it since the upgrade I'm happy to upload my Ext ROM to an FTP if you want it?
Click to expand...
Click to collapse
I didn't know it was possible to upgrade the OS ROM without touching the ExtROM. I'm not a noob with the XDAII, but I've found the myriad threads and discussions on the question of 2003SE upgrades very confusing! Since there seems to be no obvious single solution I haven't known where to start.
If you have a working ExtROM for the XDAII on O2 UK and you wouldn't mind uploading it somewhere (this site?) I'd be very grateful. If you wouldn't mind pointing me to the main OS ROM image that you used as well then that'd be groovy too.
griffog said:
The only critical noe I found was to remove the 'TPDisable' entry in the Ext ROM when performing the upgrade as you receive a lot of 'This isn't designed for WM2003SE' messages and with TPDisable enbled you can't click OK!
Click to expand...
Click to collapse
I guess that's achieved by editing the config file in the ExtROM once it's all installed after an upgrade?
Sorry, I thought this was the original WM2003SE thread! The download I used is at the beginning of this thread.
It's a while since I upgraded mine, I had thought the Ext ROM remained intact but reading the thread instructions apparently not. Sorry I can't help more but as I say it's some months sisnce I did it!
Aaah. OK. Thanks again, but I think I'll leave it in that case. I don't yet feel brave enough to start messing about with home-cooked ExtROMs if you don't have yours handy. It was good of you to offer though.

TomTom 5.1 and MDAIII

All,
I have a MDAIII flashed with the latest iMate ROM running TomTom 5.1. The problem I have is that while using TomTom 5.1 the application closes by itself and unloads from memory. This is really annoying can anyone tell me why this is happening? I am using a Holux 236 GPSlim Bluetooth.
Thanks
Msuk
Hiya,
The same problem here but with TomTom 5.0...
I flashed my MDA III with the latest iMATE ROM (1.40) and Radio 1.13...
...now TomTom closes itself, when I am trying to change map colours, when trying to zoom in or out on the map or after a minute or so when working with the BT GPS...
ANYONE???
Hi,
I reflashed my phone over the weekend using the iMate 1.40 ROM and then installed TomTom 5.0 upgraded to 5.1 and so far it is running ok - hmm odd.
Thanks
Msuk
maybe be poi
Try disabling POI and see if that helps
Does the patch to 5.1 resolve the lack of on-screen keyboard missing?
I have to resort to using the slide down hardware keyboard and have difficulty getting numbers for postcode input!
Anyone got a solution?
JC
Hi there guys, for all the problems here on tomtom you will find if searched on the forums all your answers, but as for the on-screen keyboard yes 5.1 resolves this, so go ahead and update it!
as for the crashing it is the poi that is doing this, make sure you have installed a good version of TT5 and there is a patch for the poi problem on this forum and on the ftp site. if you search for the poi patch you will definatly find it.
I have TT5 and my MDA III and it works perfectly (touch wood) with my leadtek bluetoth gps reciever on WM 2003, i could'nt for the life of me get it working on WM2005 so i had to downgrade, maybe il upgrade again when it is a bit more stable.
So all you guys, search and destroy the problem!!
Ash
Gyus! every body that have problem with the new ROM (1.40) & TT5 I strongly advise to replace the poi.dat file in teh maps directory to this one: ftp://ftp.xda-developers.com/Uploads/Blueangel/TomTom5/poi.dat
It worked for me... no more crashes... :lol:
Spanish POI..?
He3eK said:
Gyus! every body that have problem with the new ROM (1.40) & TT5 I strongly advise to replace the poi.dat file in teh maps directory to this one: ftp://ftp.xda-developers.com/Uploads/Blueangel/TomTom5/poi.dat
It worked for me... no more crashes... :lol:
Click to expand...
Click to collapse
I just did this and now I have what appears to me Spanish POI on my Tomtom..? Or did I just do it wrong..?
Like a fool, I didn't copy my existing POI and I just overwrote it!
Lesson learnt here folks is to make sure you can get back to where you were!! :lol:
Oh well, I'll fix it tonight when I get home!
POI.DAT ITA !!!
HI GUYS....
HELP ME PLEASE !!!
i have a problem with my qtek 9090 (rom v. 1.40.04 ITA; ext rom v. 1.40.153 ITA; radio rom 1.12.00) and tomtom 5.10. I have installed first tomtom 5.00 and then the upgradeto 5.10. I have installed ITALY PLUS MAP (309mb). In some place the tomtom software disconnect the gps connection and unload itself from memory. I have disabled PDI (POI) and now tomtom in that place doesn't unload itself from memory. But if i want POI function ??? Could I use the POI.DAT file linked in this forum ?? That file is good for my italian
version ??? If not where can I dowload the file POI.DAT for my italian version ???
Thank you so much !!!!
That link for the POI patch doesn't work??
Jupiter
...mate, the file is still there.... try different approach, go to the FTP manualy, then go to Uploads/Blueangel/TomTom5/, & download the POI.DAT file. (I'll try to attach it to this message anyway...)
r_grieco
From what I understood the poi patched file uses existing points of interest of your mashine, but if you'll try to search for some poi you won't be able to find it...
Any how, try it, it might help. Gust make a backup copy of the original POI.DAT file.
Everybody
I've upgraded to 5.10 & all the issues are gone, I have onscreen keyboard + the built in keyboard works absolutely fine & the original POI file works with no problems whatsoever.
P.S.
I use Great Britan maps...
I tried to do the upgrade to 5.10 and it just went on & on forever, I had to do a ctrl+alt+del to stop it!
I'm guessing I may have installed TT5 incorrectly in the first instance despite this, it works fine but no on screen keyboard and Brands Hatch doesn't exist!!!
JC
datasafe
If you want PM me I'll sed you *.CAB files of the upgrade.
I haven't used the PC wizzard to upgrade my TT5 to 5.10, so I don't know if there are any issues with it... ...or I just have a special version... :twisted:
htp
i have tried to get to the ftp site but it never works
Sure there must be a key to this
I tried to download the file but it locked me out and i had to reinstall tomtom 5
if anyone has got 5.1 or knows why i cant get it from ftp would welcome as this keyboard **** is driving me mad
clive
sorted
Sorted, need the 5.1 with patch got it!
I dont know how to post it so if you want to inform i will post it, if not email me
clive
To enyone looking for the "PROPER" upgrade to TomTom 5.10, I have uploaded it to: http://www.megaupload.com/?d=5THJ0DO4
Have Fun :twisted:

Dual Simcard problems

Hi
I'm just wondering how much trouble other people have had installing their double sim adapters. I brought the 'King of double card' adapter as mentioned in these forums as working but i seem to keep getting the error 'Invalid or missing sim'
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=6452847487
Not sure if its saying its not installed properly, faulty or just not compatible. Would raido version have anything to do with it? I'm on WM5 with Raidio 1.06.00 and protocol 1337.38 or do you need software like wivit on first or is that just for the switching of sims. I have tired it in another phone and it seemed to go although was tempramental and did take a few atempts to get going.
Cheers for your help.
Mine works fine, but I'm using 2003SE
Yeah i got this adapter as other members have posted it as working in WM5
See post
http://forum.xda-developers.com/viewtopic.php?p=161271&highlight=dual+sim#161271
wm5 compatible with old software
Dear all, any problem with the WM5 compatible with old software , which can run on 2003SE. Because, I am thinking to buy new PDAphone with WM5.

Qtek 9000 Shipped ROM now on FTP

MMB was kind enough to post the Qtek 9000 ROM here:
http://s5.yousendit.com/d.aspx?id=12XDPY08OSB2R0PAMI3W42KE3Q
And I will be uploading it to the FTP for everyone else in case the above link expires:
/Uploads/Universal/Shipped ROM/
Even though it has the "latest" ROM date and version number, I seem to be having continuous issues with my Qtek 9000 in the fact that some of my settings refuse to stick:
I have to constantly re-pair my HS850 Bluetooth headset and my GlobalSat BT-338 GPS.
I have to occasionally associate my device to my Wi-Fi router and re-enter my WPA-PSK key.
I have since flashed my device with the JASJAR ROM and the O2 Radio ROM, and customized the JASJAR's Extended ROM to see how much better it performs.
Hi,
Can anyone tell me how I can use this ROM with the NoID installer. Again I need to bypass the country code error generated by the .exe installer.
Or explain to me where these installers "unpack" their files to so I could try and locate them and use the NoID installer from there?
Michael
now only if we can get the english orange rom aswell....
BeyondtheTech said:
MMB was kind enough to post the Qtek 9000 ROM here:
http://s5.yousendit.com/d.aspx?id=12XDPY08OSB2R0PAMI3W42KE3Q
And I will be uploading it to the FTP for everyone else in case the above link expires:
/Uploads/Universal/Shipped ROM/
Even though it has the "latest" ROM date and version number, I seem to be having continuous issues with my Qtek 9000 in the fact that some of my settings refuse to stick:
I have to constantly re-pair my HS850 Bluetooth headset and my GlobalSat BT-338 GPS.
I have to occasionally associate my device to my Wi-Fi router and re-enter my WPA-PSK key.
I have since flashed my device with the JASJAR ROM and the O2 Radio ROM, and customized the JASJAR's Extended ROM to see how much better it performs.
Click to expand...
Click to collapse
I am currently using the Jasjar ROM / Extended Rom and the O2 Radio rom. No real issues so far. I am not sure I should try the update of the Qtek 9000 ROM looking at your comments above.
But is in Italian or English? thx
Unit only display "Serial v1.00" after Qtek ROM fl
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Re: Unit only display "Serial v1.00" after Qtek RO
michaelg said:
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Click to expand...
Click to collapse
Try to reflash again, but this time only use the Radio Rom 1.04.02
How can I extract the shipped ROM from my unupgraded UK TMobile MDA Pro?
I will post it up after extraction in case anyone needs it.
stanthebiker said:
How can I extract the shipped ROM from my unupgraded UK TMobile MDA Pro?
I will post it up after extraction in case anyone needs it.
Click to expand...
Click to collapse
See here http://forum.xda-developers.com/viewtopic.php?t=34552&highlight=
Re: Unit only display "Serial v1.00" after Qtek RO
michaelg said:
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Click to expand...
Click to collapse
Hi,
take a look to your pm or look at this:
http://forum.xda-developers.com/viewtopic.php?t=33191
Teja
Hi,
Yes it seemed that a radio only (v 1.04.02) ROM flash got the unit working again.
I did have the SIM and SD card out for several ROM flashes prior, but maybe the combo of all 3 (no SIM, no SD and radio only) was the trick.
Regards
Michael
michaelg said:
Hi,
Yes it seemed that a radio only (v 1.04.02) ROM flash got the unit working again.
I did have the SIM and SD card out for several ROM flashes prior, but maybe the combo of all 3 (no SIM, no SD and radio only) was the trick.
Regards
Michael
Click to expand...
Click to collapse
That is good news. Please let us know how the ROM of the Qtek performs. Currently I am using the Jasjar rom with the O2 rom. No real issue so far.
michaelg said:
Hi,
Can anyone tell me how I can use this ROM with the NoID installer. Again I need to bypass the country code error generated by the .exe installer.
Or explain to me where these installers "unpack" their files to so I could try and locate them and use the NoID installer from there?
Michael
Click to expand...
Click to collapse
If you have WinRAR or WinZip installed, right-click on the executable and choose Extract to [folder]...
Then you can throw in the MaUpgradeUt_NoID.exe file in the same folder and run it.
Someone also said you can add a line [CHECKCEID_TYPE]=1 in the RUU.conf file using Notepad, but I don't think it made a difference for me.
Hi,
Actually the last ROM I flashed was the JasJar so I'm back to square one, but I intend to try the QTek again in a couple of days (just need to settle the nerves a bit after the horror of owning an expensive brick for several hours).
In regards to unpacking the .exe files, I stumbled across that trick with WinRAR myself and I was a little surprised myself. That would make upgrading from other sites so much easier especially with access to the NoID installer.
I might try the NoID and the RUU.dll trick to bypass country code to see if both work (if my heart can stand the strain of more repeats of the brick event).
At the moment I've got a prepaid vodaphone SIM (here in Australia) and I'm working on setting that up. I've been advised that full mobile broadband is only available for billing customers so I'll have to wait until I can visit a shop to sign up and try that.
If anyone has the settings already for vodaphone let me know!
Michael
MDA PRO Qtek ROM
at the moment i am using this QTEK rom.
Just upgraded my MDA PRO and now i am using it.
It is one of the best roms because no programs/logos of O2 / T-Mobile etc. And it runs very fast, dialskin is normal windows (not the one of O2)
I am very happy with it at the moment,
only thing i want is an sim unlock tool so i can use my vodafone sim in the phone!
I AM IN HELL PLEASE HELP!!
Hey guys.
please be gentle with me . . ok so i got the rom . . .
tried to do the upgrade - the damn thing is stuck on the splash screen and will NOT progress
just shows
R. 1.00.02
G 42.33.P8
D 1.12.42 WWE
Now I got the ma upgrade no id thing - but cannot use the bloody thing now!!!
please help, if my mrs finds out she will chew me up!
pleeeaaassseee help!!!
cheers
lr
RADIO v1.03.00 required!!
Hi!
Can somebody extract the QTEK 9000 shipped RADIO v1.03.00 out and post here?
The reason being if after upgrading to the RADIO (from Dopod 900) v1.04.02 and finding it unsuitable later on I would like to re-flash it with the original shipped RADIO.
Thanks
http://www.beyondthetech.com/downloads/phone/upgrades/
I put the JASJAR, QTEK, and XDA EXEC Upgrade Utilities there. Just download the one you want, right-click and extract the files with WinZip or WinRAR...
I'm stuck pon the accursed splash screen - tho i can get bootloader up .. any ideas what i can do?
RE
Hi BeyondtheTech
Thanks.
One question. How to flash the RADIO only?
Thanks again

WM6: Problem with recieving incoming calls

Since I installed WM6 I can´t recieve incoming calls. The phone lights up but nothing more, and when I click on the reception or phone symbol when it lights up it says "no service" (translated from Swedish).
It was also some problems with Active Sync 4.5 since I upgraded, but those problems might just be because I needed to reinstall it.
Does anybody please know how to fix this, otherwise tomorrow it will go to the repair-shop and I will lose 12 days and the order in my life. : (
The sim-card works on another phone and it worked with WM5, and I have tried hard reset and a reinstall of WM6, but the problem persists.
/Danne
Hi,
Did you try to install an offoicial version of WM6 or one of the cooked ones of this board? If the latter did you take all the necessary precautions first eg installing an upgraded bootloader, etc?
If you have not you may have bricked your phone.
Give us a bit more detail so we can see how we can help.
Cheers
WB
hello
I had the same problem when I upgrade to official WM6 HTC rom, the phone don't ring and I loose the network.
I solve the problem with flashing the radio rom with older version.
I put wm6 on my phone the first day I got it. so I don't really know if this was a problem b4 with wm5.
mine only seems to ring my end after about 8 rings from the dialer so I have to get it within 2 rings b4 voice mail kicks in. Ypu think the if I update the radio as well will that help me?
ps. sorry for hi-jacking your topic seemed along the same line.
the same problem with Bouygues telecom!
Hi guys,
vinzcoyote can you tell me which radio version you put? i'm having the same problem with Bouygues telecom after updrading to WM6
thanks for the help.
C. J.
are you sure the phne settings havnt got blown out?
generally after about a day after i flash on a rom i lose my carrier settigs and i get no connections. i use the cnguar provisioning cab that is floating arond to quickly fix this.
CrunchyGremlin said:
are you sure the phne settings havnt got blown out?
generally after about a day after i flash on a rom i lose my carrier settigs and i get no connections. i use the cnguar provisioning cab that is floating arond to quickly fix this.
Click to expand...
Click to collapse
Sorry but i'm new to this: whats the "cnguar provisioning cab "?
thanks
CJ
Hi everybody,
Sorry it took a while to answer (sleeping time).
I installed the official version from HTC Europe and it it only the incoming calls that doesn´t work, I can call other people.
THE SOLUTIONS
Two solutions seems to have been offered (below) but I (as Curious Jack) are new to this so could you please elaborate of give a link where I can read more?
Vinzcoyote "I solve the problem with flashing the radio rom with older version"
CrunchyGremlin: cnguar provisioning cab
Thanks so far.
//D
Hi there
I had the same problem with mine after flashing to wm6 (but on a trinity)
Apparently there are 2 fixes:
1. Get a NEW sim , or
2. Flash radio rom back to an earlier version that was used with wm5.
Hope this helps
luckydip said:
Hi there
I had the same problem with mine after flashing to wm6 (but on a trinity)
Apparently there are 2 fixes:
1. Get a NEW sim , or
2. Flash radio rom back to an earlier version that was used with wm5.
Hope this helps
Click to expand...
Click to collapse
Thanks!
Two concrete solutions.
One last question: I use a Swedish OS - do the radio roms that is under: "Extracted Radio ROMs for your Hermes" work for me? Or only Anglosaxian PDA:s?
/Dan
similar problem discussed here:
http://forum.xda-developers.com/showthread.php?p=1442269#post1442269
in fact Palm Treo 750 (HTC Cheetah) and Hermes are based on the same radio module.
latest Palm Treo WM6 Radio version: 1.47 (Qualcom)
What that Palm utility does is simply downgrading radio to earlier version. This might work for Hermes in bootloader mode as well.
My point is: no need to install hard sspl if one can downgrade to earlier version of radio with _official_ radio downgrade tool.
I will try later and report back.
update: Palm Radio downgrade tool picked up that device is incompatible. no luck so far.
Seems problem is with Bouygues Telecom
Hi Guys,
Got the exact same problem with Bouygues Telecom. I put a Orange Sim card and it is working so I assume the issue comes from Bouygues Telecom.
So that to check, are the french guys all on Bouygues Telecom or are you using other Telco operators?
Frederic
SOLVED : WM6 & HTC Tytn & Bouygues Telecom now working
Guys,
to make it work, you need to flash ROM Radio 1.38 on top of Windows Mobile 6.
ROM Radio 1.38 can be finded at http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
what version did you use? There are few of them listed on that page:
1.38.00.01
1.38.00.10
1.38.30.10

Categories

Resources