Develop Bugs

Imate JJ ROM on O2 Xda Exec

I recently upgraded my O2 Xda Exec with the imate JJ rom (ROM Version: 1.30.82 WWE). But after a hard reset, I keep getting the following error:
Code:
Can not run on this device.
Upon investigating, I have discovered that the pocket arabizer cabs are installed during the customization after a hard reset. The similar rom (and the mentioned cabs) are working flawlessly on my other universal (imate jasjar) but on my O2, i keep getting the above error (i.e. can not run on this device). Is there a way to get the arabizer cabs to working nicely with my O2? Help in this regard would be appreciated.

help, please help. just say something. just kiddin'
hopefully, someone will come along and offer some valuable help.

T-Mobile is doing the same thing
My T-Mobile MDA Pro is doing the sme thing, it must be a way to tell the ROM that my T-Mobile is a JasJar...and I have used the "no_ID" and it did not work...
HELP

The imate roms (dont know if only from the Jasjar) have something builtin (don't know if cab file in extrom or in the rom itself) that only allows installation on imate jasjars. I think its some sort of list or program which checks the imei.

My observations so far are:
1. I have tried a custom extended rom, specially designed to avoid any cabs that might check the imei. This meant using a custom config file and autorun file from O2.
2. Only IMEI checking cab I have found so far is the 'Default_CAAVPPC_IMEI_2.6.80_range.cab' -- it is CA Antivirus software. I think it checks the IMEI.
3. I have tried with certain telco provided cabs (e.g. Mobily, Etisalat_UAE, etc.), to see if this works. It doesn't.
4. What does Install_tsk.exe do?
5. I have tried with different rom, but extended rom from imate JJ, but that doesn't work either.
6. Is there a way to fix this problem? I have seen this problem with several other people in this forum, but no concrete solution is found yet.
7. Can somebody else confirm that, indeed there is some IMEI checking in the imate roms?
8. being able to use the imate JJ roms on O2 indicates that there is no IMEI checking in the ROM itself.
9. Help is desparetly needed. :roll:
S.D.

JasJar on T-Mobile
I have tried everything since I got my T-Mobile and I installed like 100 ROMs trying to make my T-Mobile MDA Pro thinks that it is a JasJar...but no luck...
I have installed the WWE JasJar with no problem, I think the problem is installing the ME version with Arabizer and the AntiVirus software...and yes it does check the IMEI number...
My T-Mobile now officially an O2 but it seems like it refused to think that it is a localized version of the iMate JasJar.
Is there a way that makes my T-Mobile thinks it is a JasJar????

this seems to be an issue with a lot of people. can we have some experts to help us out?

IT CAN NOT BE DONE...SORRY
somedesi said:
this seems to be an issue with a lot of people. can we have some experts to help us out?
Click to expand...
Click to collapse
I think that the "Arabizer" developers had locked in the software to work only on the iMates...with specific IMEI numbers, I have installed the WWE ROM on my T-Mobile and it works fine but when I install the ME ROM it does not work...
I AM GIVING UP...

Help Pls - After M3100 Upgrade to Duttys WM6 Premium V2 - Issues with receiving calls

I upgraded my Orange SPV M3100 with Dutty's Windows Mobile 6 Premium v2
http://forum.xda-developers.com/showthread.php?t=303665
I followed the exact instructions as per the following guide
http://www.mrvanx.org/hermes_guide/dutty
Everything went fine and the phone seems to be having no issues apart from the following issue of receiving calls.
My Network - Virgin
ROM Version : WM6.Premium.v2
ROM Date : 17 April 2007
Radio Version : 1.41.00.10
Protocol Version 32.74.7020.18H
If I call it from the landline it sounds as though its ringing but actually does not respond. The phone won't rings. The calling person is getting 'The is a fault' or 'Please check the number you have dialed'.
Even I tried to reset as many times.
I even switched the network to using GSM ONLY. But still happening...
But I can make calls with no problem.
Please help

i had the same problem also and im using tmobile(US), but i just used a different rom.

Any other software running on the phone? If so, try uninstalling.

santhoshkumar said:
I upgraded my Orange SPV M3100 with Dutty's Windows Mobile 6 Premium v2
If I call it from the landline it sounds as though its ringing but actually does not respond. The phone won't rings.
Click to expand...
Click to collapse
Hi
1.Try reflashing it. Some times works after reflashing or
2.Try with another Radio Rom

todd_jg said:
Any other software running on the phone? If so, try uninstalling.
Click to expand...
Click to collapse
I am running the following softwares only
1. TomTom Navigator
2. spbBackup
3. spbWeather
Apart from that none..
I even reflashed the Radio Rom..Still havinng problems..
Found an interesting reading here
http://www.modaco.com/index.php?showtopic=250460
suggesting that it might be the 3G of TMobile UK, but I belive I haven't had the issue for the past 4 monhts having my M3100 with original Orange WM5 ROM.
Thinking of going back to the latest WM5 rom from Orange

Then try as the wise Abo Forat suggested and reflash the ROM - I would re-download it too. (Or try a different one.)

santhoshkumar said:
Thinking of going back to the latest WM5 rom from Orange
Click to expand...
Click to collapse
But plz be careful and read mrvanx downgrade guide otherwise u brick your phone. Still u can try reflashing
Good luck

anyone tried this with uk t-mob mda compact iii

heading says it all really - i'm cid locked btw.
cheers
si

Yes, thanks to This thread.
Worth noting again, that first time around under Vista did not work, I had to dig out an XP based PC to re-flash the original T-Mobile UK WM5 ROM. I then ran the procedure a second time under XP and it worked. The OS may or may not have been the factor, first time round might have been something else. XP was required to restore the original ROM.
The update to WM6 was well worth it in my mind even if purely for the instantly noticeable speed increase of the software.

thanks gajet - i'm gettign more and more tempted. one more thing - where could i get hold of the original t-mob uk rom - just for safety.
cheers
si

if its anything like finding a WM5 tmobile NL rom i'll wish you good luck. couldn't find one after bricking my own MDA CIII trying to upgrade it to WM6.
if you brick it your only choice is to wait until the official WM6 release from tmobile UK or send it back to them for repair

hi fout
well looking at gajet's post it seems there is a uk rom out there in the wild - just wondering where i might find it....
si

I actually found you the link in the main WM6 WWE topic, it links directly to the file on rapidshare.
here you go: http://rapidshare.com/files/17854890/art_tmouk_11311001_024990_wwe_ship.exe
and good luck upgrading your device, can't wait until mine gets back

thx fout - i thought i'd seen it somewhere - you found it - cheers!
si

ok guys - i did it! worked first time - heart in mouth for 15 mins but well worth it. got all my apps working no problem and remembered to write down the t-mobile gprs settings for once!
one other benefit for uk t-mob. on web&walk standard you can't use your phone as a modem - but with this setup you can fabulous!
cheers
si

Installed it today on my MDA3c T-Mobile
But where can I configure the SMS messaging center # (+447958879879) ???
solved
from another thread (Hermes WM6) :
start>phone>menu(softkey)>options>services(tab). Select "Voicemail and Text Messages" then tap "get settings".

Hiya, that rom you posted, what rom is that? Is it an official t-mob one or is it converted from somone else? Thanks
Oh, and how does it work on the UK MDA with its missing wifi?

dannyoneill said:
Hiya, that rom you posted, what rom is that? Is it an official t-mob one or is it converted from somone else? Thanks
Oh, and how does it work on the UK MDA with its missing wifi?
Click to expand...
Click to collapse
hi danny
it works fine with the lack of wifi - just doesn't have a button in comms manager as before. the rom we're talking about in this thread is the official t-mob uk wm5 (five) rom - which is good to have in case the update goes wrong.
i'm using bepe's rom on my mda c iii and it's tons better than the original. just make sure you read the threads first for instructions.
good luck.
si

thanks, which wm6 rom do you recommend?

If anybody interested in my few hours expirience with MDA C III UK + WM6 here it is:
Device: MDA Compact III UK original ROM,
Unlocked before wth IMEI Check
First I used the USPL as advised by Pof here http://forum.xda-developers.com/showthread.php?t=311479
It didn't work first time. I had errors 260 and 270. I repeated the process and it went OK after second time. Then I flashed with the B&W V2 rom. It seemed to end OK.
Notes: Before the play I used latest SPB Backup and made full backup in FlightMode. First thing I did after waking the device in WM6 was restore from it. The process went OK. After restart I got tens of notifications about installing untrusted or something DLLs and EXEcs. After that it hanged and didn't even wanted to wake up anymore.
So - hard reset -> partial restore -> PIM data only and it worked.
Excel and Word are buggy in terms of file handling. You can forget about them for now or use only as readers.
Comm Manager was working only up to the first reset. Then all buttons are hiden under the last one in upper-left corner. You can actualy see them rendering one after another.
GPS checked using iGo 2006 - working fine.
Conclusion:
I'm going to check how it synchronises with Missing Sync on my Mac. The latest version sould work with WM6. If it works I think I'm gonna stay with it longer. Word & Excel is not used by me often enough to stop me trying this Rom. Comm Manager - though, can try to live without it.

I have just flashed with the black and blue rom and all is well apart from the comm manager, yup, all one big mess in the top left. think its something to do with wifi, it was fine on the first boot, it showed the wifi icon but now its reset its gone all funky.

D810 WM6 Upgrade on P3600?

Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks

hi,
i have try to update my HTC P3600 with the oficial D810 WM6 rom!!!
result: i brick my phone!!! the rom update has stopped on 35%, and the PDA stop responding.
just recover it and go back to old ROM!
i will do it!!!

No problems to up and down
Hi, I upgrade to official ROM and any problems occurs, but I prefer PDAVIET Rom, then I downgrade the ROM and upgrade Radio to 1.46.30.11 and have all so far so good!

I hated everything about this ROM including the constant freezing of my Trinity. After 2 days I went back to AXEL's ROM and haven't looked back.

Updated yesterday morning with Dopod WM6 ANZ Rom and radio 1.46.30.11, and for me, it's paradize now...

Thanks for the replies! Anyone else with a positive experience?

I had problems with data connection with the ANZ Rom and Radio 1.46.30.11. Keeps disconnecting from the network Edge/HSDPA--could not use PIE or download email. However, with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.

thomastran said:
. . . with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
Click to expand...
Click to collapse
That brings up a good point. Has anyone tried this ROM on T-Mobile USA?

Fast and stable
I have the new aussie rom and the new radio rom 1.46.30.11 and it works perfect really fast and stable everything works...i am happy with it...

For those who successfully upgraded their P3600 to WM6, what technique did you use?

I tried doing a straight flash with ANZ ROM and was not successful. During the upgrade, the process stopped at 28%--similar to what some people have encounted. I got a screen with the new Bootloader 3.03.0000. In order for me to get out of that, I reflashed with a previous cooked ROM. It didn't flash through, but it did reset my Trinity.
While my Trinity is not BRANDED, I found that using the "HTC Trinity SIM CID Unlock" allowed me to successfully flash to the new ROM. I entered the device into the previous bootloader version 1.07.0000 prior to flashing.
As I've mentioned before, I had trouble with the radio version 1.46.30.11 with USA Cingular/ATT. I ended up using the SEA ROM with radio version 1.46.00.11 to flash the second time around.

PGMMA said:
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
Click to expand...
Click to collapse
Last night (14/7), I have upgrade my D810. No problem. According to the Guide, don't forget to take out MiniSD, battery is charged at least 50%, etc. In general the softwares for WM5 (Microsoft reader, Pocket e-Sword, Kevtris, etc) are compatible with WM6. Bass sound is good. I like WM6.

Thanks Thomas,
That's great information!

generally worked fine for me. I think mUns TE was more stable, but the battery discharging was annoying.
However a few issues:
1) Password for the web connection (GPRS) has vanished once or twice
2) Seems to lose GPRS data conenction once in a while
3) Biggest issue- the DEVICE ID has changed. This has messed up my TomTom Traffic subscription and TomTom support want a letter to prove this happened. ffs.
4) I think the main memory leaks away....

I finally decided to give WM6 a try on my P3600 but installed AX3L's all-in-one v2.0.8.1 ROM. It works well on T-Mobile's USA's network and is easy to install.

if the original rom gets stuck, what i did was flash to the original WM5 then reflash to the WM6 version.

I upgrade my D810 to WM6 and it cannot receive phone call using China mobile SIM card, used to work for the previous ROM update.

No GSM Signal

I have an HTC S620 (Original HTC)
Running WM6.1 (http://forum.xda-developers.com/showthread.php?t=374890)
but...theres an Problem:
Wifi Works Fine,No Problems
But i became no Gsm Signal,it Takes my Pin and Displays "Sim card pro" (is Normal,its an A1 Austra card-it displays this on every Phone)
but then stands on the Display "Searching" ive waited 2hours and tested 3 Sim Cards and 4 Roms,Nothing Helps
i also Flashed from HERE
The "HTC WM6 WWE ROM - 4.1.13.44_02.94.90" and also "Rogers WM6 Radio - 4,1,13,47_02.98.90",doesnt Help
any Suggestions?
Sry for My Bad english :'(

Have you also tried the Radio-Rom "T-Mobile WM6 Radio - 4.1.13.34_02.79.90 " from http://forum.xda-developers.com/showthread.php?t=332195 ?

Re-Flash Kavana or Ricky's 6.1 ROM - It's stickied. Choose either one of them.
Set it up. Pop in your SIM Card and Try again.
Check if your phone is off just incase (in the settings).
If you've done everything and you still can't get the gsm signal and it keeps searching, then either you have a problem where you live or your phones defective. Did you try going outside? Maybe you have a weak signal where you live? Let us know.
Good Luck!

ok,Have Reflashed.-No help
The Phone is Activated
Outside also No Signal
The Signal here is Good,with my Other S620 (MDA Mail without wifi)
i have no Problems

Ahh, That Sucks then all I can think of that there's something wrong with your phone i.e. it's defective. Get it replaced !
Good Luck.

Just wondering does the original rom work that came with your phone. Also what is your provider.

the Original Rom was:
HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship
This Worked Fine
The HTC is an US Device (QWERTY),i Use it here in Europe (Austria) with an Mobilkom Austria-A1 Sim Card
I Reflashed it Now,but no Help

Willmaster said:
the Original Rom was:
HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship
This Worked Fine
The HTC is an US Device (QWERTY),i Use it here in Europe (Austria) with an Mobilkom Austria-A1 Sim Card
I Reflashed it Now,but no Help
Click to expand...
Click to collapse
Ummm you might need to configure the settings on that phone because you said the original rom worked however the new one didn't. Here try this on the new rom that you have installed (assuming its the 6.1 by Ricky if not download it from below in my signature). After you installed it or have it installed then go to accessories and connection setup and that should get you rolling.