Hi! I have a Qtek 2020 with the 2003 SE, and it all worked well until one day i plug the PDA to one PC with the USB cable, and puff! The PC resets, my Qtek hard-resets, and suddenly when it turns on i notice the green LED is always ON! Like it was constantly plug to a pc/charging or activesync!!! It consumes the battery in 2/3 hours, and the backup power also! Even when i lose all power, when i put it charging it hard resets everytime! Can anything be done in this case? what can i do? PLEASE help!
Thanks!
Hey, i know your problem cause i had the same a few weeks ago.
U stuck the USB-Adapter wrong into the port so you should be a lucky person if the port isn't damaged yet.
If it is ok its should be work this way:
1. Plug the PDA to the charger (not your PC)
2. Hard-Rest
3. unplug the calbe
4. Hard-Rest
So at this point normaly the PDA port isnt frozen in charing-mode..
If it hasn't worked try to lay your pda on the street, enter a bulldozer and drive across it... :lol:
Related
Help, please...
I don't know if this is HW trouble. I've flashed ROM to some from the FTP complete shipped-think it was belgian.. And installed some apps.
I started to take some pictures with upgraded-I mean 4 new icons of style of recording- Record program and then the machine has frozen,after that black screen...
No hard,soft reset,no connection with activesync,flash programs tells there is nothing on cable.
When I unplug the battery, the diod is red, with battery nothing.
What can it be,how to solve? Thank U very much,I have NO backup...
And no phone at all
Roman
are you sure it is not in bootloader mode?
No,
I'm sure... I haven't done anything to make it bootload..
I have had taking some photos only,
maybe there is some hot-key to make it?
But I did only press the button on joystick to make a photo..
And after that if did freeze..
Thx
No,
I'm sure... I haven't done anything to make it bootload..
I have had taking some photos only,
maybe there is some hot-key to make it?
But I did only press the button on joystick to make a photo..
And after that if did freeze..
Thx
Hi.
maybe you should first try to enter the Bootloader... (Camera- OR VoiceRecording-Button at the same time with Power- AND Reset-Button) Serial or USB should appear together with a VersionNo. on the Screen ..
.. after that you could check my post here - maybe that will help you out ?!
Good luck!
Joern
I had the same thing after using a car usb adapter + usb charger lead.
I think it was caused when I started the car with everything plugged in.
Red light, no charge, whn I used the usb charger with my work PC, it wouldn't charge it.
I ordered a replacement handset, and just left my XDA IIs in the cradle charging. It seemed to start charging after a while, but very slowly.
When I woke up the next day it was OK. It is fine now.
Hi! I have a Qtek2020 with the 2003 SE, and it all worked well until one day i plug the PDA to one PC with the USB cable, and puff! The PC resets, my Qtek hard-resets, and suddenly when it turns on i notice the green LED is always ON! Like it was constantly plug to a pc/charging or activesync!!! It consumes the battery in 2/3 hours, and the backup power also! Even when i lose all power, when i put it charging it hard resets everytime! Can anything be done in this case? what can i do? PLEASE help!
Thanks!
I have bought BA and im very happy with it.... but i dont have any cable for it and i wanna flash from wm03se (original system) to wm05 can i do that with bluetooth? I live in serbia and a cable for him is very expensive... anyone help please???
I have another question, when press down on buttons below those four buttons on front of the phone i need a little harder to press, same to answer button, can i clean it somehow.... THANKS
I seriously doubt it, as flashing requires rewriting the internal memory, that AFAIL can only be done when the device is in bootloader.
Is there any other way to flash phone? And please help me about buttons??
You can flash through the memory card if you can't do it via sync cable.
Can anyone show how to flash through memory card step by step? or drop some link here?? THANKs
As a start, I'd try the wiki. http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
i have read all about flashing but have not found how to flash with memory card... please help... thanks
I dont want to be annoying but HELP!!!! please
If you can't find anything on SD Card flashing, it may not be possible with your device.
I was hoping this was possible as well.
The BA I just got from Ebay stopped working while connected to the cradle or sync cable. When I first plugged it in to my sync cable I noticed it was kind of wobbly, and instead of showing the amber charging light it showed the red light. Putting it in the cradle it wouldn't do anything either until I left it on for a few hours then tried to do a hard reset.
After that it still wouldn't work on the sync cable, but did work on the cradle. So I flashed it from the original ROM to one of Xplodes to see if that would help. Well it works fine and I was able to upgrade on the cradle, but it still wouldn't work on just the sync cable.
Just yesterday when I tried to plug it into the sync cable again to see if it at least would charge while on it, I noticed that when it was on and I plugged it in the screen dimmed with a bunch of lines eating away at the screen. Finding that odd I unplugged the sync cable, rebooted it (worked fine) and put it back on the cradle. The moment it came in contact with the connection it again dimmed and got the wierd garbled screen, eventually going black and showing the red light instead of the amber light.
I also just noticed that the phone doesn't work. I was so worried about setting the thing up that I didn't even check that basic functionality!
So, here I have a BA that doesn't have a working phone, and can't be synced. The wi-fi seemed to work at least.
So is there any way to change the ROM back to OEM using the SD card, bluetooth, IRDA, or wi-fi? At least then I can try and send the thing back to the Ebayer I got it from. If I send it back now they'd see I have WM 6.1 on it and probably tell me I'm SOL.
Hi! I have a Qtek 2020 with the 2003 SE, and it all worked well until one day i plug the PDA to one PC with the USB cable, and puff! The PC resets, my Qtek hard-resets, and suddenly when it turns on i notice the green LED is always ON! Like it was constantly plug to a pc/charging or activesync!!! It consumes the battery in 2/3 hours, and the backup power also! Even when i lose all power, when i put it charging it hard resets everytime! Can anything be done in this case? what can i do? PLEASE help!
Thanks!
Of usually i search and search until I find an answer but I have now idea what to do...
-T-Mobile Dash with a Cingular Sim running Kavanna 6.1 (and kavanna has ran fine on it for the most part)
-Phone randomly froze (wouldnt let me type a text msg)
-Powered off
-Went to power it back on and nothing -no lights, no nothing
-Tried the two softkeys and power button for two seconds
-Tried te camera button and power button
-Pulled batter multiple times and pulled all cards from it
-When it is plugged into a wall I dont even get a power charging light....
Any ideas? I cant afford a new phone
[email protected] said:
Of usually i search and search until I find an answer but I have now idea what to do...
-T-Mobile Dash with a Cingular Sim running Kavanna 6.1 (and kavanna has ran fine on it for the most part)
-Phone randomly froze (wouldnt let me type a text msg)
-Powered off
-Went to power it back on and nothing -no lights, no nothing
-Tried the two softkeys and power button for two seconds
-Tried te camera button and power button
-Pulled batter multiple times and pulled all cards from it
-When it is plugged into a wall I dont even get a power charging light....
Any ideas? I cant afford a new phone
Click to expand...
Click to collapse
looks like your battery is gone Try with another battery
woulnt I be able to get some sort of power or light with the batter pulled and it plugged in? cause I dont....
[email protected] said:
woulnt I be able to get some sort of power or light with the batter pulled and it plugged in? cause I dont....
Click to expand...
Click to collapse
Not if your battery is completely waste it. Check if your battery pins in your dash make full contact with your battery, because that can cause a problem (very odd, but it happens). If not, try another battery.
Have you checked your charger, I guess is damaged because if your battery is damaged or if is no battery at all and you connect the charger the led will turn red.
sam happened w me, no solution yet
hate to tell you that you might have bricked your phone,
the same happened to my excalibur, when i tried to flash it -mistakenly- with the wrong rom,
thing is; the rom is controlling the power charging process and the battery support to the device, if something went wrong with the rom for any reason; then no instructions are sent to the battery neither the charger, therefore: no power sign of any in the device.
i couldn't find an answer to fix my dash, but i think the solution is either changing the rom or JTAG-ing it might solve the problem, though i have no tools neither knowledge to do so.
sorry pal, the bright side is: you are a member of (BDC) the Bricked Dash Club
cheers
bootrecord said:
hate to tell you that you might have bricked your phone,
the same happened to my excalibur, when i tried to flash it -mistakenly- with the wrong rom,
thing is; the rom is controlling the power charging process and the battery support to the device, if something went wrong with the rom for any reason; then no instructions are sent to the battery neither the charger, therefore: no power sign of any in the device.
i couldn't find an answer to fix my dash, but i think the solution is either changing the rom or JTAG-ing it might solve the problem, though i have no tools neither knowledge to do so.
sorry pal, the bright side is: you are a member of (BDC) the Bricked Dash Club
cheers
Click to expand...
Click to collapse
With the information provided it hasn't been your same case due that he hasn´t flashed any other rom, so basically he can try another battery and see what happens.
errrrrr
New Battery - Still no lights and using the reset features found in the unbricking tutorial do not work.
Tried using a cable from my comp to give power to phone so it isnt power cable
So what now? I cant even get to a bootloader screen or anything.... I cant afford a new phone ERRR
**Update-
Was plugging in the USB cable and looks like it gets a connection only when it is plugged in a little but this not just at the end that connects to the phone (it happened when the phone was already plugged into the cable and I was plugging it into the comp and vice versa) Um so that is strange - the light does not stay on and when the battery is in the phone I do not get that quick red flash - so it still doesnt work and cant do anything
[email protected] said:
New Battery - Still no lights and using the reset features found in the unbricking tutorial do not work.
Tried using a cable from my comp to give power to phone so it isnt power cable
So what now? I cant even get to a bootloader screen or anything.... I cant afford a new phone ERRR
**Update-
Was plugging in the USB cable and looks like it gets a connection only when it is plugged in a little but this not just at the end that connects to the phone (it happened when the phone was already plugged into the cable and I was plugging it into the comp and vice versa) Um so that is strange - the light does not stay on and when the battery is in the phone I do not get that quick red flash - so it still doesnt work and cant do anything
Click to expand...
Click to collapse
Maybe is your USB port causing the problem.