Develop Bugs

PLEASE HELP! Ever seen something like this on Himalaya??????

Hi! I have a Qtek 2020 with the 2003 SE, and it all worked well until one day i plug the PDA to one PC with the USB cable, and puff! The PC resets, my Qtek hard-resets, and suddenly when it turns on i notice the green LED is always ON! Like it was constantly plug to a pc/charging or activesync!!! It consumes the battery in 2/3 hours, and the backup power also! Even when i lose all power, when i put it charging it hard resets everytime! Can anything be done in this case? what can i do? PLEASE help!
Thanks!

Hey, i know your problem cause i had the same a few weeks ago.
U stuck the USB-Adapter wrong into the port so you should be a lucky person if the port isn't damaged yet.
If it is ok its should be work this way:
1. Plug the PDA to the charger (not your PC)
2. Hard-Rest
3. unplug the calbe
4. Hard-Rest
So at this point normaly the PDA port isnt frozen in charing-mode..
If it hasn't worked try to lay your pda on the street, enter a bulldozer and drive across it... :lol:

can i flash with bluetooth?

I have bought BA and im very happy with it.... but i dont have any cable for it and i wanna flash from wm03se (original system) to wm05 can i do that with bluetooth? I live in serbia and a cable for him is very expensive... anyone help please???
I have another question, when press down on buttons below those four buttons on front of the phone i need a little harder to press, same to answer button, can i clean it somehow.... THANKS

I seriously doubt it, as flashing requires rewriting the internal memory, that AFAIL can only be done when the device is in bootloader.

Is there any other way to flash phone? And please help me about buttons??

You can flash through the memory card if you can't do it via sync cable.

Can anyone show how to flash through memory card step by step? or drop some link here?? THANKs

As a start, I'd try the wiki. http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel

i have read all about flashing but have not found how to flash with memory card... please help... thanks

I dont want to be annoying but HELP!!!! please

If you can't find anything on SD Card flashing, it may not be possible with your device.

I was hoping this was possible as well.
The BA I just got from Ebay stopped working while connected to the cradle or sync cable. When I first plugged it in to my sync cable I noticed it was kind of wobbly, and instead of showing the amber charging light it showed the red light. Putting it in the cradle it wouldn't do anything either until I left it on for a few hours then tried to do a hard reset.
After that it still wouldn't work on the sync cable, but did work on the cradle. So I flashed it from the original ROM to one of Xplodes to see if that would help. Well it works fine and I was able to upgrade on the cradle, but it still wouldn't work on just the sync cable.
Just yesterday when I tried to plug it into the sync cable again to see if it at least would charge while on it, I noticed that when it was on and I plugged it in the screen dimmed with a bunch of lines eating away at the screen. Finding that odd I unplugged the sync cable, rebooted it (worked fine) and put it back on the cradle. The moment it came in contact with the connection it again dimmed and got the wierd garbled screen, eventually going black and showing the red light instead of the amber light.
I also just noticed that the phone doesn't work. I was so worried about setting the thing up that I didn't even check that basic functionality!
So, here I have a BA that doesn't have a working phone, and can't be synced. The wi-fi seemed to work at least.
So is there any way to change the ROM back to OEM using the SD card, bluetooth, IRDA, or wi-fi? At least then I can try and send the thing back to the Ebayer I got it from. If I send it back now they'd see I have WM 6.1 on it and probably tell me I'm SOL.

no power, no lights, no idea.... help?

Of usually i search and search until I find an answer but I have now idea what to do...
-T-Mobile Dash with a Cingular Sim running Kavanna 6.1 (and kavanna has ran fine on it for the most part)
-Phone randomly froze (wouldnt let me type a text msg)
-Powered off
-Went to power it back on and nothing -no lights, no nothing
-Tried the two softkeys and power button for two seconds
-Tried te camera button and power button
-Pulled batter multiple times and pulled all cards from it
-When it is plugged into a wall I dont even get a power charging light....
Any ideas? I cant afford a new phone

[email protected] said:
Of usually i search and search until I find an answer but I have now idea what to do...
-T-Mobile Dash with a Cingular Sim running Kavanna 6.1 (and kavanna has ran fine on it for the most part)
-Phone randomly froze (wouldnt let me type a text msg)
-Powered off
-Went to power it back on and nothing -no lights, no nothing
-Tried the two softkeys and power button for two seconds
-Tried te camera button and power button
-Pulled batter multiple times and pulled all cards from it
-When it is plugged into a wall I dont even get a power charging light....
Any ideas? I cant afford a new phone
Click to expand...
Click to collapse
looks like your battery is gone Try with another battery

woulnt I be able to get some sort of power or light with the batter pulled and it plugged in? cause I dont....

[email protected] said:
woulnt I be able to get some sort of power or light with the batter pulled and it plugged in? cause I dont....
Click to expand...
Click to collapse
Not if your battery is completely waste it. Check if your battery pins in your dash make full contact with your battery, because that can cause a problem (very odd, but it happens). If not, try another battery.

Have you checked your charger, I guess is damaged because if your battery is damaged or if is no battery at all and you connect the charger the led will turn red.

sam happened w me, no solution yet
hate to tell you that you might have bricked your phone,
the same happened to my excalibur, when i tried to flash it -mistakenly- with the wrong rom,
thing is; the rom is controlling the power charging process and the battery support to the device, if something went wrong with the rom for any reason; then no instructions are sent to the battery neither the charger, therefore: no power sign of any in the device.
i couldn't find an answer to fix my dash, but i think the solution is either changing the rom or JTAG-ing it might solve the problem, though i have no tools neither knowledge to do so.
sorry pal, the bright side is: you are a member of (BDC) the Bricked Dash Club
cheers

bootrecord said:
hate to tell you that you might have bricked your phone,
the same happened to my excalibur, when i tried to flash it -mistakenly- with the wrong rom,
thing is; the rom is controlling the power charging process and the battery support to the device, if something went wrong with the rom for any reason; then no instructions are sent to the battery neither the charger, therefore: no power sign of any in the device.
i couldn't find an answer to fix my dash, but i think the solution is either changing the rom or JTAG-ing it might solve the problem, though i have no tools neither knowledge to do so.
sorry pal, the bright side is: you are a member of (BDC) the Bricked Dash Club
cheers
Click to expand...
Click to collapse
With the information provided it hasn't been your same case due that he hasn´t flashed any other rom, so basically he can try another battery and see what happens.

errrrrr
New Battery - Still no lights and using the reset features found in the unbricking tutorial do not work.
Tried using a cable from my comp to give power to phone so it isnt power cable
So what now? I cant even get to a bootloader screen or anything.... I cant afford a new phone ERRR
**Update-
Was plugging in the USB cable and looks like it gets a connection only when it is plugged in a little but this not just at the end that connects to the phone (it happened when the phone was already plugged into the cable and I was plugging it into the comp and vice versa) Um so that is strange - the light does not stay on and when the battery is in the phone I do not get that quick red flash - so it still doesnt work and cant do anything

[email protected] said:
New Battery - Still no lights and using the reset features found in the unbricking tutorial do not work.
Tried using a cable from my comp to give power to phone so it isnt power cable
So what now? I cant even get to a bootloader screen or anything.... I cant afford a new phone ERRR
**Update-
Was plugging in the USB cable and looks like it gets a connection only when it is plugged in a little but this not just at the end that connects to the phone (it happened when the phone was already plugged into the cable and I was plugging it into the comp and vice versa) Um so that is strange - the light does not stay on and when the battery is in the phone I do not get that quick red flash - so it still doesnt work and cant do anything
Click to expand...
Click to collapse
Maybe is your USB port causing the problem.

Fullbrick?

I got a Xperia S here from a friend, he says that the screen suddenly turned off when he was using it. But the notification bar was on!
So he gave me the phone, because I want to fix it.
If I plug in the charger, no reaction.
Soft-Reset - No Reaction.
Hard-Reset - No Reaction (No Vibrates)
Trying connect to fastboot mode / flash mode. No Success.
My last chance is to remove the battery for 5 min and then look if the battery will charge or not.
The bootloader is unlocked and there was OpenSEMC beta 2 installed.
Is this a Hardware bricked phone, or a software issue with empty battery?

GoldenRazz said:
I got a Xperia S here from a friend, he says that the screen suddenly turned off when he was using it. But the notification bar was on!
So he gave me the phone, because I want to fix it.
If I plug in the charger, no reaction.
Soft-Reset - No Reaction.
Hard-Reset - No Reaction (No Vibrates)
Trying connect to fastboot mode / flash mode. No Success.
My last chance is to remove the battery for 5 min and then look if the battery will charge or not.
The bootloader is unlocked and there was OpenSEMC beta 2 installed.
Is this a Hardware bricked phone, or a software issue with empty battery?
Click to expand...
Click to collapse
this sounds like a softbrick, there are lots of threads on fixing such issues, i seem to remember 1 problem was switching off auto lighting and bang the screen goes blank, holding the power and vol up/down for about 15 seconds makes a hard reboot 3 vibes, then plug in via usb and restart with flash tool running might work. there are lots of different help threads that will guide you through this. dont give up.

But Hardreset doesn't work. I already tried it.

Read this : http://forum.xda-developers.com/showthread.php?t=1849170

Thank but I read already this thread.
I can't remove the battery right now, so I asked you guys if this issue is a Software issue or Hardware issue.
If I can remove battery I will test everything I can and then I'll report.

GoldenRazz said:
Thank but I read already this thread.
I can't remove the battery right now, so I asked you guys if this issue is a Software issue or Hardware issue.
If I can remove battery I will test everything I can and then I'll report.
Click to expand...
Click to collapse
i think it's hardware issue. cause for it to be software issue it must at least show red led when plugged into the charger.
bring it to service center is a wise choice. but u can try different charger (with bigger amperage output is preferable), and what happen when u plugged it to PC? did the led color shows up?

If I connect to my PC nothing happens.
No Fastboot Mode no Flashmode possible.
I remove the battery the following days, cause I don't have a torx 6 to remove the screws. Must buy one.

Removed Battery and insert it back again. Now trying to charge but no reaction.

If you plug-in a Real charger(Not pc usb), what happen?
Sometimes when the battery is full empty, you have to keep it charges about 15-20 minytes without powering on
Sent from my LT26i using xda app-developers app

Put it in the real Charger, and charged 30 minutes.
But still no reaction. I guess it's a fullbricked Phone now.

[Q] My SM-T900 doesnt switch on

Hey there. I am new to XDA.
My tablet last night was just fine! Everything was working perfectly and i played a few games before i went to sleep. Anyhow, Today afternoon i trying to wake up the screen of my tablet and it doesn't even turn on the screen! I put it in to charge but nothing happens. The only thing that happens is that is getting warm at the back because of charging.
So overall, last night was working, today is not even turn on.
p.s: Few weeks back i try to root my tablet and i didn't make it. I had the problem "Firmware upgrade encountered and issue. Please select recovery mode in Kies and try again" But i managed to recover to fully factory settings all over again.
Thanks

Try this tool:
http://www.ebay.com/sch/i.html?_fro...&_nkw=usb+current+and+voltage+tester&_sacat=0
Make sure the current should be ~ 1,7 Amps, voltage should be ~ 5.2 Volts.
There are many unknowns: bad charger or bad USB cable or bad USB charging port.
You should use another known working USB cable or charger to test. Another micro USB cable can be used to charge or 5 Volts to 5.3 Volts charger.
If you tablet is charging, press the HOME button it should show a green battery icon.

The problem is not with the charger, its with the software I guess
Sent from my SM-G530H using XDA Free mobile app
---------- Post added at 05:31 PM ---------- Previous post was at 05:29 PM ----------
Try this:
Press Power+Home+Vol down button.
Now you will enter download mode. Use the volume keys, and navigate to Reboot Device. Press the Power key to select
Now your device should reboot
Sent from my SM-G530H using XDA Free mobile app

I tried it already that.
heinrich.himmler said:
The problem is not with the charger, its with the software I guess
Sent from my SM-G530H using XDA Free mobile app
---------- Post added at 05:31 PM ---------- Previous post was at 05:29 PM ----------
Try this:
Press Power+Home+Vol down button.
Now you will enter download mode. Use the volume keys, and navigate to Reboot Device. Press the Power key to select
Now your device should reboot
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
I tried the power,home,down thing also the power,home,up nothing happens. As i told when i try to charge the tablet the back of the tablet was getting warmer, a sign that says its charging. BUT the screen does not open with the battery on it.. Basically it doesn't turn on at all.

Tried that
Also tried that too.. But i think the voltage its alright i think and also i use my 7 months old original charger that came with the tablet. So the chances are so few.

chillzman said:
I tried the power,home,down thing also the power,home,up nothing happens. As i told when i try to charge the tablet the back of the tablet was getting warmer, a sign that says its charging. BUT the screen does not open with the battery on it.. Basically it doesn't turn on at all.
Click to expand...
Click to collapse
Another way if you cannot see anything, try of using HDMI adapter to connect to your TV. Signs of your tablet is running: vibration at start up, sounds of start screen or menu and back buttons light up. If you see these signs, probably the LCD cable is disconnected or loose. But how do you know your tablet is charging ? The charger or cable is working but the USB charging port doesn't work, you'll have a dead battery. There are too many unknowns you're even not sure, then others cannot guess what is wrong. First thing first, you need to know if your tablet is charging, then you will figure out what is next.

Nothing!
Beut said:
Another way if you cannot see anything, try of using HDMI adapter to connect to your TV. Signs of your tablet is running: vibration at start up, sounds of start screen or menu and back buttons light up. If you see these signs, probably the LCD cable is disconnected or loose. But how do you know your tablet is charging ? The charger or cable is working but the USB charging port doesn't work, you'll have a dead battery. There are too many unknowns you're even not sure, then others cannot guess what is wrong. First thing first, you need to know if your tablet is charging, then you will figure out what is next.
Click to expand...
Click to collapse
Hey there.. Thanks for the help!
I know that is charging because the back of the tablet is getting warmer when i charge it. Also no back keys or nothing is showing up. I tried everything. The only thing i didnt try is the HDMI thing. Plus the tablet is in full silence. no vibration or anything. i dont remember if the tablet was vibrating at the turn on. The only thing i got from the tablet since yesterday is nothing. not even a light of the screen or download mode or back light NOTHING so unexpectedly
Thanks!

When the tablet shows no sign of life, the only way to know first if the mainboard is working, is is taking charge ?
The back is warming cannot tell anything. If the battery is dead you cannot go troubleshooting further unless swapping another battery to see if the tablet can turn on. Even with a full charged battery, a defective power button could prevent the tablet turning on.
There are too many unknowns, that's why elimination method have to use to find the source of problem: software or hardware.
The USB current and voltage tester will help you without guessing the working status of your tablet. I have no clues, that's why I'm guessing too.

Not even a clue!
Beut said:
When the tablet shows no sign of life, the only way to know first if the mainboard is working, is is taking charge ?
The back is warming cannot tell anything. If the battery is dead you cannot go troubleshooting further unless swapping another battery to see if the tablet can turn on. Even with a full charged battery, a defective power button could prevent the tablet turning on.
There are too many unknowns, that's why elimination method have to use to find the source of problem: software or hardware.
The USB current and voltage tester will help you without guessing the working status of your tablet. I have no clues, that's why I'm guessing too.
Click to expand...
Click to collapse
Thanks for the trying to help!
I don't even have a clue. I search the whole internet about this problem and nothing. I will take it back to the store and use the warranty. Thats the best way

Long shot but try this. Unplug the charger. Hold the power button down for a full 20 seconds. Even if the tablet is in a "frozen" state, that should turn it off. Then try turning it on again.

Tried it.
lewmur said:
Long shot but try this. Unplug the charger. Hold the power button down for a full 20 seconds. Even if the tablet is in a "frozen" state, that should turn it off. Then try turning it on again.
Click to expand...
Click to collapse
I tried it man. Same thing nothing happens.. The tablet is DOA. I don't know what happened ..