Hi,
Does anyone know how to use the Universal as a Modem ?
I installed the Modem Driver , but I cannot get it to work !
Are there any changes I need to make in the LAN Settings in the Internet Explorer ?
Thanks
Micman
Guess you're referring to USB modem.
1. Disconnect USB Cable.
2. Universal: START/PROGRAMS/Wireless modem
- Set USB as Connection Type
- Tools/Options: Check Use preferred GPRS / Verify APN
- Start the MODEM
3. Connect USB Cable. PC should detect the modem.
- Install drivers from original CD (D:\OEM\APPS\Drivers\USB Modem)
- Start USBModem_Dialer.exe - located in the drivers folder (Fill the UN/PWD, APN...)
- It will create a new dial up connection. Click CONNECT. It will probably fail but don't worry.
4. Try to connect using the created Dialup Connection
- Reenter UN/PWD.
- CONNECT
GOOD LUCK!
Thanks a lot !!!
Does this same work as Bluetooth Modem ???
That would make my day.
Cheers
Micman
When i used my old XDA2i and XDA2s as a wireles modem (USB or Bluetooth) i did as said above, but when you enter ""wireless modem"" it turn the phone part off for making and recieving calls and makes the phone a medem only.
BUT on my Exec using the smae toshiba laptop i have made a bluetooth conection to my Exec, then told the laptop this is a modem on the new Bluetooth comm port.
When i ask the laptop to dial the new conection it dials the default APN in the phone and works fine.
so i dont use wireless modem, and i can still have the phone on for recieving calls.
Can someone please confirm that if you use a Exec as a ""wireless modem"" it dose or dose not turn the phone off so it cant recieve calls or have they now made it do both at the same time
Thanks
John
Making a BT Connection is even more simpe!
1.Put Universal in discovery mode.
2. Search for a new device on PC / ADD Dial Up Networking Service
PC will install a Bluetooth modem
3. Create a dial up connection, enter UN/PWD & Phone number: *99#
VOILA
Hi,
great , thanks a lot for the tips, but .....
It installs a 33600 Standard Modem Driver, and I can't find a Bluetooth driver.
Am i forgetting something ?
Micman
Perhaps you should reinstall/upgrade BT drivers.
BT Modem is a part of BT Stack/Drivers.
Actually I am not 100% certain, but it seems like the BT Connection also automatically starts a Wireless modem service. If I am not mistaken, my BT Modem conneciton also drops when I answer or make the call.
So to answer your question: Yes, you can receive the call. But when you answer, the dial up connection drops.
applecom said:
When i used my old XDA2i and XDA2s as a wireles modem (USB or Bluetooth) i did as said above, but when you enter ""wireless modem"" it turn the phone part off for making and recieving calls and makes the phone a medem only.
BUT on my Exec using the smae toshiba laptop i have made a bluetooth conection to my Exec, then told the laptop this is a modem on the new Bluetooth comm port.
When i ask the laptop to dial the new conection it dials the default APN in the phone and works fine.
so i dont use wireless modem, and i can still have the phone on for recieving calls.
Can someone please confirm that if you use a Exec as a ""wireless modem"" it dose or dose not turn the phone off so it cant recieve calls or have they now made it do both at the same time
Thanks
John
Click to expand...
Click to collapse
All sounds great... now then.. has anyone managed to get their Universal working a s bluetooth modem under Apple Macintosh OSX 10.4+
Come on somebody surprise me...
I have contacted Ross Barkman who has kindly emailed me a modem script... if anyone has the time & inclination to check this out....
Sell it and buy a Windows PC ;-)
going to test this now. thanks for the directions!
http://forum.xda-developers.com/viewtopic.php?t=37298&highlight=wireless+modem
Related
Hi All,
I would like to set up my MDAIII with a Bluetooth Modem connection to my UMTS capable phone (Nokia 6680)
Unfortunatly the MDA does not recognize the Modem Service of my phone... or any phone for that matter.
Any Ideas or hack anyone can recommend?
Thanks,
Matt
http://asukal.seesaa.net/article/1031857.html
xda-rocks said:
http://asukal.seesaa.net/article/1031857.html
Click to expand...
Click to collapse
Hello xda-rocks,
Thanks for the link. Unfortunatly after copying the BTWizardProfiles.dll over and changing the registry I can now indeed see the Modem service of my phone but I cant create a connection to it.
I forgot to add I have a German version of the MDA.
I also tried to install the complete 0.0.3900 stack and it did not help.
Any Ideas?
Thanks,
Matt
When you say you can't create a connection - do you mean you can't pair the devices or do you mean that you can pair them, but you can't create the bluetooth dial-up connection?
This topic has been covered several times - if you need further help PM me and I'll talk you through it. Then, we wont be creating another long thread.
Hi guys!
I am a little late in the game... needing to pack up in a few hours!
I have an SX-66, which I am setting up to use a wireless Bluetooth Modem for my laptop.
I am so close to getting it working! I need one more piece of the puzzle!
I have paired the devices
The wireless modem service is visible
My SX66 GPRS settings are perfect for rogers (internet.com/wapuser1/wap)
I have used my laptop with a the BT modem in my T616, so I know it works
The laptop connects to the SX66 - I see the phone icon pop up.
BUT... I don't know what number my laptop should dial!
WIth my T616 it was *99***1#, and away it went.
With my old Nokia phone I think it was just *9.. I can't remember.
I tried typing internet.com in the laptop, but no luck.
What number do i set my laptop to dial??? Once I get it, I think it'll work. Your help is needed!
It's so close... I see it trying on the network, but then disconnects.
I started the Wireless Modem App, and I see the Send/receive icons flash, but then, same thing... disconnects right away.
How do I make sure it accesses my Rogers profile???
Thank you!
Mike
I am on the right track.
It's *99#...
But hmm... it seems to have hung up on me again...
interesting...
It works!!!!!!!
And the biggest miracle of all........ The answer was in the manual!!
That's a new one!
What was the problem then?
It just started working!
I used that dialing code again, and boom... Perfect connection!
here is a manual from i-mate about how to use bluetooth modem...
Hi there!!!
If u still couldn't get through try this:
1) Tap G Icon on yiour SX66 and conncet GPRS...and say browse for few sec ON YOUR PDA
2) Disconnect the same and then use the Dial Up from yr Laptop...dial *99#.....*99***1# is used in case wherein one nesds to initialise MODEM by putting Modem Initialising string in Modem set up in control panel
I hope, this helps
Good luck
Bear with me......
I have WM6 running, but when I connect to my laptop via BT it says there is only the Serial connection available, now I am being thick? As I cannt get the laptop to send things via BT OR the phone to recieve via BT, by things I mean photo's and vid clips etc etc, but always fails.
I have paired them repeatedly and deleted connections and made connections and everything.
So I am at a loss, am I missing somthing obvious or is it more problematical? I guess it could even be the XP BT stack, but thats next on the list to check.
Hints, tips and advice as ever greatfully received
Deech
Hi, sounds like a very annoying problem, i can only think of 2 things:
1. make sure that 'recive all beams' is ticked on your PDA, this sets the location etc for when you recive files in bluetooth i think.
2. uninstall your bluetooth in XP and reinstall it to another USB port.
I hope this helps, i cant think of much else to help
ummm.... 'receive all beams' would be infrared.. not bluetooth
install schap's advance config tool (should find it under the cab collection thread) and there's an option to enable OBEX file transfer. After you do that on your trinity and soft reset, you should be able to send/receive files
Thanks will do.
I wonder if I should upgrade the software too? I have MinRus's original WM6 onboard atm, or perhaps it's LVS's..... I really ought to pay attention, and now I see that there are loads of "newer" ones out and about.........
/me goes to ferret around the fora
"ummm.... 'receive all beams' would be infrared.. not bluetooth"
no it's both
that's what i thought too, its for both.
when i send a file it's : "beam file" you see your infrared and bluetooth connections.
and maybe this: visible for others in bluetooth options? will help ?
check the same for your laptop maybe...
I have installed the Faria ROM on my Hermes and I can tell I am quite happy with it. Only thing I can't get to work is to use my Hermes with my AUDI built in handsfree carkit. I am able to get connected with it and I am also able to do phone calls, only thing is that there is no access to my phonebook, I also have tried to set the bluetooth to allow remot sim access, but still doesn't work. Does anybody know if there is a nweer bluetooth driver out there? Will be happy for any suggestion.
Thanks
Duke
I have Chryslers U-Connect and it accesses my phonebook I put into U-Connect. when connected , I have never been able to access my phonebook from my phone.
@pumpiron, sorry for the silly question, but what is U-connect and where would I get that from?
It comes with Chrysler Products. Check it out...http://www.jeep.com/crossbrand/uconnect/jeep/interface.html
Sorry to bring up this oldie, but I am now having this issue when trying to connect my bluetooth to my Kenwood radio. Downloading is extremely slow. These are the things I used to be able to do before I flash my Hermes with a new WinMo 6.5 ROM:
1. Dial a number through the radio. I now have to dial from the phone.
2. Calls log is not being downloaded. The only thing that shows up is the contacts list.
3. Simultaneous actions. Before the flash I used to be able to dial a number while information was being taken from the phone to the radio. This is no longer the case. I have to wait until info is downloaded before being able to make a call. This also prevents me from answering incoming calls.
Is there anyway to check what version of bluetooth (if any) is on the phone or if there's some type of upgrade?
Appreciate any help.
OK, this may be a bit naive, especially since T-Mo is rumored to stop tethering on the TM506 in later updates (heaven forbid SIM provisioning), but I would like to tether the Dash to the TM506, like a PC, via BT and only have data on the TM506. I really love my Dash for now and the TM506 has HSPDA 3.5G. Can this be done? Can any additional WM6 software accomplish this?
Bluetooth Dunn
GJSmith3rd said:
OK, this may be a bit naive, especially since T-Mo is rumored to stop tethering on the TM506 in later updates (heaven forbid SIM provisioning), but I would like to tether the Dash to the TM506, like a PC, via BT and only have data on the TM506. I really love my Dash for now and the TM506 has HSPDA 3.5G. Can this be done? Can any additional WM6 software accomplish this?
Click to expand...
Click to collapse
Find my thread on Bluetooth Dun, it has the software you need, just install it on your T-Mobile Dash to the main memory. If you cannot find it get back with me...........!
Thanks for the quick reply and advice.
I'll search your threads to find the DUN Posts and post back in a few days. So I quess the Dash can dial to T-Mo 3G using the TM506 modem via BT. Great!
I just wonder if there is a way to configure DUN without it eating minutes. Previously, when I set up connection teaming on a laptop with the Dash and a Samsung T409 using DUN, minutes on my plan began to mysteriously get used.
Is it possible to use T-Mo DUN without eating minutes off your plan?
That Sony Phone Is Now In T-Mobile Stores
GJSmith3rd said:
Thanks for the quick reply and advice.
I'll search your threads to find the DUN Posts and post back in a few days. So I quess the Dash can dial to T-Mo 3G using the TM506 modem via BT. Great!
I just wonder if there is a way to configure DUN without it eating minutes. Previously, when I set up connection teaming on a laptop with the Dash and a Samsung T409 using DUN, minutes on my plan began to mysteriously get used.
Is it possible to use T-Mo DUN without eating minutes off your plan?
Click to expand...
Click to collapse
That's a beautiful little Sony phone, I saw it in the T-Mobile store yesterday. I believe it will work, if you cannot find the software, I will PM you a link to the BT dunn software a little bit later. I got to find it also, but I have it.........!
I found it
Look for a PM in the next 10 minutes.........!
The BlueTooth Dunn File
Below is the BT dunn file, install it to the main memory, you still will need the configuration set up.........!
Technology said:
Below is the BT dunn file, install it to the main memory, you still will need the configuration set up.........!
Click to expand...
Click to collapse
Thanks, I still have it in my downloads from the last time you helped me. I didn't really need it then because my modded Dash had BT DUN enable for PC to Dash modem. Hope it works for Dash to TM506 modem.
Update: I installed the app to main memory but I don't see a program link or folder in program files. I'm guessing something went wrong but the install was reported as successful.
Nothing is Wrong
GJSmith3rd said:
Thanks, I still have it in my downloads from the last time you helped me. I didn't really need it then because my modded Dash had BT DUN enable for PC to Dash modem. Hope it works for Dash to TM506 modem.
Update: I installed the app to main memory but I don't see a program link or folder in program files. I'm guessing something went wrong but the install was reported as successful.
Click to expand...
Click to collapse
Nothing is wrong, it's there, you will not see anything, but it will work, pair the devices. Let me know how things work out for you....!
Sorry, Techhology but I still can't figure this out. The Bluetooth services of the TM506 only list Input Device and Serial Port. Give me a few more pointers. Thanks.
Print A Picture
GJSmith3rd said:
Sorry, Techhology but I still can't figure this out. The Bluetooth services of the TM506 only list Input Device and Serial Port. Give me a few more pointers. Thanks.
Click to expand...
Click to collapse
Print a picture of what you are working with on the Sony TM506, I would love to make this work. Another thing did you get the 2 devices paried.......?
Yes the devices are paired. The TM506 sees these services on the Dash: Object Push, File Transfer, Audio Remote Control and target. The Dash sees these services on the TM506: Input Device and Serial Port.
It appears that the SE PC Suite connects to the TM506 through BT serial port. You can also use BT dial-up networking directly instead of BT serial port.
If it were possible to have the Dash use the BT serial port on the TM506, like the SE PC Suite, then it might work. But I can't find any function in the Dash to do this.
I was also successful in connecting two PC's to the TM506 via BT. One via BT DUN and the other via BT PAN. The PC's had internet but the connections seemed very slow.
Do You Have 3g On The Sony TM506
GJSmith3rd said:
Yes the devices are paired. The TM506 sees these services on the Dash: Object Push, File Transfer, Audio Remote Control and target. The Dash sees these services on the TM506: Input Device and Serial Port.
It appears that the SE PC Suite connects to the TM506 through BT serial port. You can also use BT dial-up networking directly instead of BT serial port.
If it were possible to have the Dash use the BT serial port on the TM506, like the SE PC Suite, then it might work. But I can't find any function in the Dash to do this.
I was also successful in connecting two PC's to the TM506 via BT. One via BT DUN and the other via BT PAN. The PC's had internet but the connections seemed very slow.
Click to expand...
Click to collapse
Ok, you will not see anything the Dash but the BT dunn file are there. Do you have a BT set up on the TM506?
Somthing tells me this would have been easier with a PPC instead on a Smartphone. GRIN
I can use DUN from a PC to both the TM506 and the Dash just fine. But I can't seem to figure out how to use DUN from the Dash to the TM506.
Many BT profile features on the TM506 are not visible to the Dash. Especially DUN and PAN. The BT serial port is visible but theres no application on the Dash to take advantage of this like the SE PC Suite does.
I've attached a picture of the BT services provided by the TM506 to a PC using the Widcomm BT stack.
Looks like the picture is too small. I'll try to post a better one.
Larger Photo of TM506 BT service to a PC with Widcomm BT Stack. The SE PC Suite uses the Serial Port to connect. Use can also use Dial-Up directly. In the photo I was using PAN - notice the green connected icon.