Related
I have had an XDA2 for sometime. I have just purchased a XDA2s but can not get it to beam a file, like on the xda2. I go to file explorer, hold down on the file I want to send and hit beam file. The page says searching but does not ever find any devices!!
I have upgraded the Radio ROM upgrade to version 1.12.00 and the Bluetooth upgrade to version 1.0.0.3900, but I still have the same problem. Is anyone else with an XDA2s able to beam files like with the xda2, or have any ideas why it is not working?
Thanks
hey same here too
hi
i too have the same problem and i dont even know on which windows m i Running my PDA ??
Can some one help me how to find which windows have been installed on my XDA IIs
if you have installed the 3900bluetooth stack, then you must forget about the beam option, when u tap and hold within file explorer, tap send by bluetooth instead of beam file, this will work as i had same problem, and i was told this by members here.
hope this helps.......
my way of beaming files via bluetooth is to open the bluetooth manager and select "new" then click on "browse files on a remote device". After that, bluetooth devices will be discovered by your BA. Once the devices are already listed, you could select to which device you want files to send to...
hope this helps...
cheers!
Guys, you're talking about two different things here. When you choose 'beam file' that means trying to send it to another device using the infrared port, not Bluetooth.
It says it can't find other devices because on your receiving device you've probably turned Bluetooth on, but not IR. And even if you had, you're supposed to align the IR ports and keep the two devices pretty close to each other. On your BlueAngel, the IR port is on the left side so you have to turn it.
You should either choose 'send via Bluetooth' if you want to send something via Bluetooth, or choose 'beam file' if you want to beam it via IR. Check if your receiving device has Bluetooth or IR capabilities and has these switched on; if you're using IR, point the device's IR ports to each other.
Your Windows version:
Start -> Settings -> System -> About.
Thanks
Thanks all of you
I just Cant belive that i couls see a reply posted so so soon
A million Thanks
and ill do keep a check on the forum
bluetooth not in my menu
Hey jojo
i have not got send via bluetooth on my menu in the FE
also i dont know the bluetooth stack ???
how do i get that now
no bluetooth sending on SPV M2000/XDAiis...
Robrecht: they are not talking about two different things, to beam a file it "should" pick up all incoming beams including bluetooth, if you try beam a file a menu will come saying two things:
1) infrared - align ports
2) searching...
Now the "searching" means its looking for bluetooth devices, provided you have activated "recieve all incoming beams" in beam settings...
Unfortunately although i know how it all works, i also have the same problem with my SPV M2000, i also cant send via bluetooth,i had the XDAii and that worked totally fine, the only way to do it on the M2000 is through exploring another bluetooth device, but not all devices allow for that...its such an easy operation that has become so difficult, i mean if thats how they have programmed it, it sucks ass, even old crappy phones with bluetooth can send files easier...
i think it is a problem and if there is any solution can someone let us know...
regards...
Re: bluetooth not in my menu
spread_smiles said:
Hey jojo
i have not got send via bluetooth on my menu in the FE
also i dont know the bluetooth stack ???
how do i get that now
Click to expand...
Click to collapse
go to bluetooth in the settings/connections. then in bluetooth, and tap 'about'
this will prob show 3500version, it needs to be 3900.
you vcan get this i think from this sites ftp, but i cant remember how to access that, but i got mine off google, dunno what site, but google is ur friend, search for bluetooth upgrade 3900* u will find it.
or even better, look here,
http://forum.xda-developers.com/viewtopic.php?t=18215
BT3900.....?????
I've heard alot of good and bad remarks about bt3900 series.... Im running an SPV M2000 on windows 2003 second edition, will upgrading my bt3500 to bt3900 solve my sending via bluetooth option(or beam file option)?????
I GOT IT BUT ...
thanks JOJO
but when i clicked the link i got to download 2 BT stack but when i unzip it it just would not come in one file but split in to 10s and than i am confussed how do i get it all to one ???
how did you upgrade it to 3900
i dont get any cab file
is there any particular software to unzip this file !!
Re: I GOT IT BUT ...
spread_smiles said:
thanks JOJO
but when i clicked the link i got to download 2 BT stack but when i unzip it it just would not come in one file but split in to 10s and than i am confussed how do i get it all to one ???
how did you upgrade it to 3900
i dont get any cab file
is there any particular software to unzip this file !!
Click to expand...
Click to collapse
you dont need to unzip a cab file, a cab file is the same as a .exe file on your desktop pc,
just copy the cab file accress to a location on your pda, somewhere you know where it is.... lets say you copy over using active sync, into your documents..... when you go into file explorer on your pda, just tap the cab file and it will install ........ and hey presto..... your on bt build 3900
tradivise, upgrading to 3900, should sort your problem out.... sending files from devices to another handset by Ir is something that needs avioding, as i find that even if the pda can detect the device, it aint compatable and will always fail..... i even found this on my old XDA 2
instead on tapping on beam file on 3500 like with the xda2, upgrade to 3900 and you dont need the beam option.... just hold on file and tap send via bluetooth., anything is now sendable but if you want this to help with Ir within the beam option, this wont help as it is for bluetooth.....
happy installing if you choose to....... id recommend it tho!!
it does solve the problem!
joey jojo... thanks, yeh i installed it and it solves the problem, i now have the "send via bluetooth" option in the menu when holding down on a file i want to send, you can almost send anything....there is one thing thats seems a bit odd!!! - when using my bluetooth headset it sometimes crackles a bit even though im within a metre or two of the phone, i dunno, that doesnt seem normal...but i guess for the amount of times i use my headset compared to the amount of times i "wanted" to send files via bluetooth, i suppose i can live with the crackling...
thanks JJ
So i also recomend to anyone having the same problems as me upgrading to bt3900, i mean im not sure about the crackling, i read on another post somewhere that there are a few others with the same crackling problem, but as far as sending the via bluetooth, it solves the problem...
this is good news!
joey jojo, could I ask for one too?
cheers!
bt3900...
you can get bt3900 from this site - http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
It gives you instructions and everything else...
happy installing...
thanks tradivise! one question though, would it be just fine if I wouldn't upgrade may radio rom and just install the bluetooth upgrade, would just do the trick the same?
cheers!
yeh it all workd fine for me and i didnt upgrade my radio...im running radio 1.06.02...
guys, thanks! just installed BT3900 and my BT works better now.
Hey man, thats cool, im glad you got it sorted out...
HAPPY BLUETOOTHING!!!!!!!!
I tried several times but I cannot sync my new XDA Orbit via Bluetooh. ActiveSync does not find my device although I did it the help-file told (choose the right COM-port). Could the reason be that I am using the WIDCOMM BT driver instead of the pre-installed standard Win XP-driver?
Same problem
Hi all. A have the samу problem with connection activesybc via bluetooth. When a want o connect my device say me that is no partnership to connect. What a reason. No posts about this a find
P.S. Sorry for my bad english
http://www.europe.htc.com/support/faq.html?id=167
awell done. synced
Hi.
May I know where you got your Widcomm BT stack for the Artemis?
Thanks
no. my artemis has a standard build in bluetooth drivers but for the first time i had aproblem whit them
I had this problem trying to sync with my Dell PC using its built in bluetooth hardware and the Widcomm stack. No luck at first, but I solved it by uninstalling the Widcomm stack in device manager, then allowing XP to re-discover the hardware and to install the alternative Microsoft stack. (XP SP2 only).
With XP handling the bluetooth, I had no problem pairing with the Artemis using instructions from here - http://www.geekzone.co.nz/content.asp?contentid=3163 .
Syncing is now straightforward.
F.
Okay, I've scanned the entire website and visited your links, I still cannot set up a bluetooth partnership with my P3300 and my laptop.
I'm using D-link DBT-122.. and it just doesnt connect.
What am I missing?
No one has any ideas?
Had to bump it because its frustrating to not be able to sync via bluetooth.
Anyone wid ANY ideas whatsoever?
I just managed to advance a bit on this path:
Thanx to a Hazymat over on xda-dev I managed to get it all working, his guide, for anyone else finding this:-
1) On your computer, go into bluetooth settings. Check bluetooth is ON and set to discoverable. Add an incoming COM port, eg. COM5.
2) On ActiveSync on your computer, go into connection settings. Tick all the boxes. If the COM port is greyed out, untick it, close the settings box, go back in, now tick it and set the COM port to eg. COM5.
3) On the K Jam go into bluetooth settings, and remove the connection to your computer.
4) On your K Jam go into ActiveSync, click 'menu' > 'connect via bluetooth' then you should see a message saying 'cannot find an existing bluetooth partnership with a PC that supports ActiveSync. Would you like to set up a partnership now?'
5) Click YES - you are taken to the Bluetooth settings screen.
6) Now click 'new partnership. As soon as you do this, the K Jam will search, and as long as your computer has bluetooth discoverable turned on, your computer will eventually be displayed. Check the computer name showing on the K Jam is the same as the name you gave the bluetooth profile on your computer.
7) On K Jam, click your computer name then NEXT.
Now enter a passcode - any four digit number (remember it) then next
9) When you do this, your computer will pop up with a message saying "a bluetooth device is requesting authorisation". Open this message and type in the code that you gave the K Jam. The next screen on the computer will tell you that it was successful - click FINISH.
10) Back on the K Jam, the screen will now be showing the services available. AS LONG AS YOU FOLLOWED STEP 1 and 2, ActiveSync will be an option, and you need to tick this and press FINISH on the K Jam.
11) Close bluetooth settings, now in ActiveSync screen click MENU > Connect via bluetooth. Your ActiveSync program on the computer should eventually pop up and connect.
The only port you worry about is the incoming pc one. Active Synch does the rest. You must see acitivesync as a service when you connect. I did not see it until I updated my Toshiba Bluetooth stack from thier website. Creating other ports can stop the synch from working.
Click to expand...
Click to collapse
(http://discussion.treocentral.com/wm-synchronization/104553-bluetooth-activesync.html)
The PC has an adapter managed by Widcomm stack (5.5.0.3200, latest so far). Only the "ActiveSync" service is set up as "Automatic", therefore immediately available. ActiveSync is version 4.5.
I do everything anew as instructed, my Hermes sees only the "ActiveSync" remote service. Sometimes it may stubbornly offer the "Serial Port" instead but after a few retries (yes, everything anew!) the correct service is seen. So far so good.
Then I create an outgoing port with same name as on PC. COM5 is apparently optimal at both sides. The PDA begins synchronization, the "Connected" sound is heard from PC... and almost immediately is followed by the "Disconnected" sound. The PDA additionally explains: "port is not available".
If I now refresh services visible via this partnership, the "ActiveSync" is replaced by "Wireless Stereo", "Serial Port" (checked), "Dialup Networking" and "Headset". This is a dead end. The stack on the PC somehow remembers this state and the correct choice of services won't be available anymore.
From now on I can do everything anew repeatedly, and if succeeded, all I get is that quick disconnection.
After installing the older v5.1.0.5600 stack the behaviour changed a bit. Instead of connecting/disconnecting an error message appears: "Synchronization cannot be completed successfully". Reinstalled the newer one, the appropriate behaviour returned.
Had no luck with the M$ stack altogether. The laptop manufacturer doesn't offer the Q323183 separately. Even if it is already included in SP2, I still must provide the kernel-mode drivers. The older Widcomm stack has them in a separate directory but they fail to install. Moreover I read somewhere that the M$ stack allegedly supports ActiveSync at a cost of absent RFCOMM support, and the latter is of paramount importance for me. Perhaps I'm destined to use cable (no problems with it).
Someone at experts-exchange.com states:
There are 2 major issues with activesync 4.x
1 - You cannot sync wirelessly
2 - You cannot sync via cable/cradle when the wifi card is active. If you are connected to a wireless network I would suggest you delete the connection and then try re-syncing.
If you do not need the latest version I would suggest you rollback to version 3.8 unless the above limitations dont affect you or you absolutely need the latest version.
Click to expand...
Click to collapse
If that only were an official M$ statement... And regarding older ActiveSync versions, those didn't work at all for me, as far as I remember.
I know I'm going to get flamed which, after much debate, I realize I cannot avoid. I've searched and searched and perhaps I haven't searched properly. I've read endless posts on this and that but nothing. I'm going to lay this out and if you want to flame me... go ahead.
Cingular 8525 - Schaps 4.01 Lite
IBM Thinkpad T60
Bluetooth Configuration > Diagnostics > Device Properties
Manufacturer: Broadcom Corporation
Firmware Revision: Version 2.1.92.108
I create a partnership by searching for the computer from my device. Find it and enter the code. Partnership complete.
Open My Bluetooth Places\My Device and I see 11 potential services which include, My PIM Synchronization, My Dial-up Networking, My audio gateway and 8 others. So basically, I have a lot of possibilities. On my 8525 I have only 4 possible connection types which are Dun, Serial, headset and something else but NOT PIM synchronization.
I go to activesync on my 8525 with Bluetooth radio turned on. Go to connections and I have the when cradled "synchronize all pc's with USB (my only option). Click on menu > connect via bluetooth and get the message "cannot find an existing bluetooth partnership with a pc that supports activesync...". Sounds like a pc side issue maybe so i go to activesync on my pc and make sure that I allow a connection. I choose com6 because it is available and I modified HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Serial\Ports\00000016ceed6fdcort to use com6 because otherwise my only option is com0 which isn't available in activesync.
Anyway, it still wont connect. I'm not a genius but I'm not an idiot either. I'm obviously missing something so help a brotha out.... PLEASE!!
I am having the same problem with my BT bluesoid (cant spell)...I know have used it before, but could not figure out how to do it with hermes.
Let me know if you find a fix...
I'm searching through the threads...I think I saw somewhere how broadcom's BT drivers don't work with AS or WMDC...Somebody had removed the Broadcomm stack and defaulted to the Micro$oft BT stack...
There's some info here with XP if you haven't seen it:
http://www.htcwiki.com/thread/708261/ActiveSync+via+Bluetooth?t=anon
Despiadado1 said:
I know I'm going to get flamed which, after much debate, I realize I cannot avoid. I've searched and searched and perhaps I haven't searched properly. I've read endless posts on this and that but nothing. I'm going to lay this out and if you want to flame me... go ahead.
Cingular 8525 - Schaps 4.01 Lite
IBM Thinkpad T60
Bluetooth Configuration > Diagnostics > Device Properties
Manufacturer: Broadcom Corporation
Firmware Revision: Version 2.1.92.108
I create a partnership by searching for the computer from my device. Find it and enter the code. Partnership complete.
Open My Bluetooth Places\My Device and I see 11 potential services which include, My PIM Synchronization, My Dial-up Networking, My audio gateway and 8 others. So basically, I have a lot of possibilities. On my 8525 I have only 4 possible connection types which are Dun, Serial, headset and something else but NOT PIM synchronization.
I go to activesync on my 8525 with Bluetooth radio turned on. Go to connections and I have the when cradled "synchronize all pc's with USB (my only option). Click on menu > connect via bluetooth and get the message "cannot find an existing bluetooth partnership with a pc that supports activesync...". Sounds like a pc side issue maybe so i go to activesync on my pc and make sure that I allow a connection. I choose com6 because it is available and I modified HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Serial\Ports\00000016ceed6fdcort to use com6 because otherwise my only option is com0 which isn't available in activesync.
Anyway, it still wont connect. I'm not a genius but I'm not an idiot either. I'm obviously missing something so help a brotha out.... PLEASE!!
Click to expand...
Click to collapse
I finally got it to work by changing the com ports in activesync on my laptop. I am currently using "com 7". Each time I changed com ports I deleted the connection and paired again. That was the only way I could get it to work.
Jim Murray said:
I finally got it to work by changing the com ports in activesync on my laptop. I am currently using "com 7". Each time I changed com ports I deleted the connection and paired again. That was the only way I could get it to work.
Click to expand...
Click to collapse
Did you have to edit the laptop registry to get com7 to work? In activesync, i don't have the option of using com7. Only com1 and 3 or IR.
i have the same problem here,it says" cannot find an existing bluetooth partnership with a pc that supports activesync..."." and then opens some sort of list whit divices and services.
i have selected com 8 becouse i wont select com7 (dunno why)
so i selected com 8 in every program: bluesoleil, activesync 4.5 and MS stack in my ppc.
the system is in spanish but you can recognoise all the things in a sec.
but still cant sync, what am i doing wrong?
Despiadado1 said:
Did you have to edit the laptop registry to get com7 to work? In activesync, i don't have the option of using com7. Only com1 and 3 or IR.
Click to expand...
Click to collapse
are you able to select com7 in your hermes? i cant select it, a f*** error apears
Despiadado1 said:
I know I'm going to get flamed which, after much debate, I realize I cannot avoid. I've searched and searched and perhaps I haven't searched properly. I've read endless posts on this and that but nothing. I'm going to lay this out and if you want to flame me... go ahead.
Click to expand...
Click to collapse
ActiveSync via Bluetooth is the most confusing and non-user friendly thing that any software develop can ever come up with. You're not alone. After trying to figure it out for many months, I gave up. Hopefully, your thread can shed some light.
Create a Bluetooth serial port...
You're almost there...once you have the partnership established, open your bluetooth settings and go to the "COM Ports" tab. Press the "Add..." button and create an "Incoming" port. Give it a sec and it will go through the whole "new hardware found" thing. Make a note of the Com Port number it created. Once thats done, open up active-sync on the PC and go to "File->Connection Settings" and check the "Allow connections to one of the following:" and set it to the com port that was created. Hit "OK", then on the mobile device run activesync and go to "Menu-> Connect via Bluetooth". You should now be good to go.
After fighting this one for several months with my 8525 w/att wm6, here what I found .......
On my Dell (toshiba stack) you will have two types of com ports . Incoming (server) and outgoing (client). The incoming(server) is the one you want, but not important as you will see!! The only thing that is important is to note which com ports did your bluetooth manager setup!!!
After you set the ActiveSync partnership with your PC through USB. Go to Files/Connection Setting. Check the box " Allow connections to..."Now select the incoming(server) com port, or at least the one you think it is!! OK out...
Now on the 8525 go to ActiveSync, select connect via bluetooth. When it comes to the "No Partnership exists....". Now follow the prompts on setting up the bluetooth partnership. Select your PC, NOW Re-discover services on your PC!! If the correct port is selected on your PC, ActiveSync service should appear. If not, no sweat, just go back to the PC. Change the com port in the connection setting for Activesync. Now back on 8525 re-discover services on your PC. If you have to, just go down the list of com ports until you get the Activesync service to show up!!
Now here is the Kicker, when you get the active sync service and hit OK. Now try to ActiveSync via Bluetooth. if it come back with no partnership exists, just follow the screen prompts. select your PC with activesync service is checked....uncheck it, then re-check it. Now you should receive a warning about ending connection to conserve power. You are done!!
Good Luck!!
Stuart
Holy Crap it works..thanks a million scl_electronics, I had given up on the whole activesync & bluetooth. I saw the thread and said why not..let me try again. It was pretty much how you explained( there were some differences, using broadcomm stack). It is a little confusing, but hell it took me about 20 mins of fiddling around and now it works..Great Work
I have been trying all weekend to Sync my 8525 and my HP laptop via Bluetooth and it will not work! They are both paired and I can do just about everything with them both but sync with ActiveSync. I can use the phone as a modem, transfer files, use the laptop as an external stereo speaker and as a speaker phone but it will not sync with freakin' Activesync! Both the Laptop and the 8525 serial ports are set at Com8. When attempting to sync via bluetooth on the phones active sync all I get is:
"Cannot connect using Bluetooth to a PC that supports ActiveSync. You may be out of range. Would you like to create a Bluetooth partnership with a different PC?"
Oh my LORD!! This is becoming soooo anoying! I have tried searching here and through Google, I have tried just about everything to get this crap to work and so far NOTHING!!!!
I am at wits end! Please if you can help it would save my sanity!
-Cingular 8525
-Windows Mobile 6 Professional (OEM Rom downloaded from HTC website)
-Rom version 3.62.502.3
-Radio version 1.54.07.00
Thank You!
acuraman2004 said:
Both the Laptop and the 8525 serial ports are set at Com8.
Click to expand...
Click to collapse
Looks wrong to me, as PDA's COM8 is not laptop's COM8. I suggest you delete all the serial ports, and delete the partnership itself on both PDA and laptop. Then let ActiveSync establish it back as it wants.
Koterpillar said:
Looks wrong to me, as PDA's COM8 is not laptop's COM8. I suggest you delete all the serial ports, and delete the partnership itself on both PDA and laptop. Then let ActiveSync establish it back as it wants.
Click to expand...
Click to collapse
I have tried that before, and it still gave me the same message when trying
to sync. The laptop usually sets the com port to 8 and the phone sets the com port to 0, however this does not seem to sync. I will try it again tonight to see if maybe I missed something. Thank you for your suggestion.
If anyone else has any ideas I would love to try them.
Thank You!
For what it's worth, I'm able to sync my 8525 via Bluetooth ActiveSync with my Windows XP Professional notebook. It took a little finegaling, but I was able to make it happen. Unfortunately, the notebook is at home, and the phone is not allowed into my office. If you don't get it resolved by this evening, I'll try to post my settings after I get home.
Joe
marinerjoe said:
For what it's worth, I'm able to sync my 8525 via Bluetooth ActiveSync with my Windows XP Professional notebook. It took a little finegaling, but I was able to make it happen. Unfortunately, the notebook is at home, and the phone is not allowed into my office. If you don't get it resolved by this evening, I'll try to post my settings after I get home.
Joe
Click to expand...
Click to collapse
Thank you very much, from one Joe to another!
So......Huston we still have a problem. Deleting the two devices and repairing did not seem to correct the issue.
Hmmm. I have experienced this before, and have fixed it....somehow. Sorry. I have a Dell laptop (yeah ok, wotever!). Established activesync partnership via usb to start. Told phone to find new BT gear, paired with laptop, ticked every box that the laptop presented, including 'allow device to access activesync service'. In BT settings, laptop has activesync box ticked in list of services available. To connect, I go into comm manager, turn on activesync, menu, connect via bluetooth. All sweet. Running WM6.1, had it working on most of the WM6 roms too.
what bluetooth stack are you using on you laptop?
Umm.. would that be 'WIDCOMM Bluetooth Software 5.0.1.2609'? Dunno - whatever is installed on the Dell Inspiron 6400. Would be happy to provide any further info, if you can tell me exactly what it is you want and where I find it....
XtreMe_G said:
what bluetooth stack are you using on you laptop?
Click to expand...
Click to collapse
Does this help any?
ads2112 said:
Umm.. would that be 'WIDCOMM Bluetooth Software 5.0.1.2609'? Dunno - whatever is installed on the Dell Inspiron 6400. Would be happy to provide any further info, if you can tell me exactly what it is you want and where I find it....
Click to expand...
Click to collapse
oh, sorry ads2112, should have been clearer, i was asking acuraman2004 wat his bluetooth stack was, not you.......you dont have any problems with ur bluetooth and activesync right?
XtreMe_G said:
oh, sorry ads2112, should have been clearer, i was asking acuraman2004 wat his bluetooth stack was, not you.......you dont have any problems with ur bluetooth and activesync right?
Click to expand...
Click to collapse
You know what I am not sure as to where that information would be located on the laptop. I will search for the information once I get home from work and post it. Thank you for the reply.
Joe
acuraman2004 said:
I have been trying all weekend to Sync my 8525 and my HP laptop via Bluetooth and it will not work! They are both paired and I can do just about everything with them both but sync with ActiveSync. I can use the phone as a modem, transfer files, use the laptop as an external stereo speaker and as a speaker phone but it will not sync with freakin' Activesync! Both the Laptop and the 8525 serial ports are set at Com8. When attempting to sync via bluetooth on the phones active sync all I get is:
"Cannot connect using Bluetooth to a PC that supports ActiveSync. You may be out of range. Would you like to create a Bluetooth partnership with a different PC?"
Oh my LORD!! This is becoming soooo anoying! I have tried searching here and through Google, I have tried just about everything to get this crap to work and so far NOTHING!!!!
I am at wits end! Please if you can help it would save my sanity!
-Cingular 8525
-Windows Mobile 6 Professional (OEM Rom downloaded from HTC website)
-Rom version 3.62.502.3
-Radio version 1.54.07.00
Thank You!
Click to expand...
Click to collapse
Didn't have quite the same problem that you are having, but was having trouble. I found these instructions and took care of mine right away. The author, and the link to the site are listed in the instructions. I copied them to notepad so as not to lose them. Hopefully this will work for you.
BlueTooth Sync
I got my bluetooth to work by following Hazymat's guide: Here (http://www.modaco.com/Active_Sync_over_BlueSoleil_Blutooth-t232696.html) Excerpt:
Thanx to a Hazymat over on xda-dev I managed to get it all working, his guide, for anyone else finding this:-
1) On your computer, go into bluetooth settings. Check bluetooth is ON and set to discoverable. Add an incoming COM port, eg. COM5.
2) On ActiveSync on your computer, go into connection settings. Tick all the boxes. If the COM port is greyed out, untick it, close the settings box, go back in, now tick it and set the COM port to eg. COM5.
3) On the K Jam go into bluetooth settings, and remove the connection to your computer.
4) On your K Jam go into ActiveSync, click 'menu' > 'connect via bluetooth' then you should see a message saying 'cannot find an existing bluetooth partnership with a PC that supports ActiveSync. Would you like to set up a partnership now?'
5) Click YES - you are taken to the Bluetooth settings screen.
6) Now click 'new partnership. As soon as you do this, the K Jam will search, and as long as your computer has bluetooth discoverable turned on, your computer will eventually be displayed. Check the computer name showing on the K Jam is the same as the name you gave the bluetooth profile on your computer.
7) On K Jam, click your computer name then NEXT.
Now enter a passcode - any four digit number (remember it) then next
8) When you do this, your computer will pop up with a message saying "a bluetooth device is requesting authorisation". Open this message and type in the code that you gave the K Jam. The next screen on the computer will tell you that it was successful - click FINISH.
9) Back on the K Jam, the screen will now be showing the services available. AS LONG AS YOU FOLLOWED STEP 1 and 2, ActiveSync will be an option, and you need to tick this and press FINISH on the K Jam.
10) Close bluetooth settings, now in ActiveSync screen click MENU > Connect via bluetooth. Your ActiveSync program on the computer should eventually pop up and connect.
The only port you worry about is the incoming pc one. Active Synch does the rest. You must see acitivesync as a service when you connect. I did not see it until I updated my Toshiba Bluetooth stack from thier website. Creating other ports can stop the synch from working.
Steve Sharp said:
Didn't have quite the same problem that you are having, but was having trouble. I found these instructions and took care of mine right away. The author, and the link to the site are listed in the instructions. I copied them to notepad so as not to lose them. Hopefully this will work for you.
BlueTooth Sync
I got my bluetooth to work by following Hazymat's guide: Here (http://www.modaco.com/Active_Sync_over_BlueSoleil_Blutooth-t232696.html) Excerpt:
Thanx to a Hazymat over on xda-dev I managed to get it all working, his guide, for anyone else finding this:-
1) On your computer, go into bluetooth settings. Check bluetooth is ON and set to discoverable. Add an incoming COM port, eg. COM5.
2) On ActiveSync on your computer, go into connection settings. Tick all the boxes. If the COM port is greyed out, untick it, close the settings box, go back in, now tick it and set the COM port to eg. COM5.
3) On the K Jam go into bluetooth settings, and remove the connection to your computer.
4) On your K Jam go into ActiveSync, click 'menu' > 'connect via bluetooth' then you should see a message saying 'cannot find an existing bluetooth partnership with a PC that supports ActiveSync. Would you like to set up a partnership now?'
5) Click YES - you are taken to the Bluetooth settings screen.
6) Now click 'new partnership. As soon as you do this, the K Jam will search, and as long as your computer has bluetooth discoverable turned on, your computer will eventually be displayed. Check the computer name showing on the K Jam is the same as the name you gave the bluetooth profile on your computer.
7) On K Jam, click your computer name then NEXT.
Now enter a passcode - any four digit number (remember it) then next
8) When you do this, your computer will pop up with a message saying "a bluetooth device is requesting authorisation". Open this message and type in the code that you gave the K Jam. The next screen on the computer will tell you that it was successful - click FINISH.
9) Back on the K Jam, the screen will now be showing the services available. AS LONG AS YOU FOLLOWED STEP 1 and 2, ActiveSync will be an option, and you need to tick this and press FINISH on the K Jam.
10) Close bluetooth settings, now in ActiveSync screen click MENU > Connect via bluetooth. Your ActiveSync program on the computer should eventually pop up and connect.
The only port you worry about is the incoming pc one. Active Synch does the rest. You must see acitivesync as a service when you connect. I did not see it until I updated my Toshiba Bluetooth stack from thier website. Creating other ports can stop the synch from working.
Click to expand...
Click to collapse
Dude thank you! I will try that as soon as I get home!
I have it working on my desktop PC in front of me. Here's my setup:
PC:
IVT BlueSoleil v5 I think (the one that costs money but has a new slick interface)
Device Name: PokerPro
Device Type: Desktop
Accessibility: Allow other Bluetooth devices to find this device, Allow other Bluetooth devices to connect to this device
Services: Bluetooth Serial Port (COM4), Bluetooth Serial Port (COM5), Bluetooth Advanced Audio, Bluetooth Object Push, Bluetooth File Transfer, Bluetooth Personal Area Network. All have Security On (i.e. a secure connection).
Serial Ports: COM4: Direction Incoming. COM5: Direction Incoming.
Microsoft ActiveSync:
Connection Settings:
Allow USB connections
Allow connections to one of the following: COM4
This computer is connected to: Automatic
Open ActiveSync when device connects
I >don't< have "Allow wireless connection on device when connected to the desktop" set.
On my Phone:
Running WM6 (Windows CE 5.2.1933) (note not WM6.1) and Schap's 4.01 full rom
Bluetooth device name: "Dir Someone" (my name). I don't have OBEX enabled.
Within the Bluetooth settings:
PokerPro shows up as a device. If I select it, it shows Wireless Stereo (not ticked) and ActiveSync (ticked). This is the important bit - ActiveSync needs to show up as a service under your PC paired connection.
Mode: Turn On Bluetooth is ticked, but "Make device visible to other devices" is not ticked.
COM Ports: I don't have anything there aside from "New Outgoing Port".
FTP: Enable Bluetooth Explorer is ticked
Security: Authentication (Passkey) required is not ticked.
ActiveSync: I have "Synchronise all PCs using this connection" ticked, with the default " 'USB " selected.
When I select "Connect via Bluetooth", I get a message on my desktop saying the phone has connected, and ActiveSync turns green and starts spinning.
If I recall correctly, it took me a couple of goes before the ActiveSync service appeared under the PC paired connection (the bit in italics above). I don't recall how I got that working but it was just a matter of deleting the connection and letting them discover each other again I think.
I did a bunch of research and found a few articles that I read at the time, but because I'm using BlueSoleil it was slightly different for my setup. But you can get the general idea of what you need to do here.
Check My post here, it is on the butoom of the page!!
http://forum.xda-developers.com/showthread.php?t=347472
hth,
Stuart
Steve Sharp said:
The only port you worry about is the incoming pc one. Active Synch does the rest. You must see acitivesync as a service when you connect. I did not see it until I updated my Toshiba Bluetooth stack from thier website. Creating other ports can stop the synch from working.
Click to expand...
Click to collapse
I don't see "Activesync as a service" on my Cingular 8525. now AT&T, and I have their latest software. How do I get an update?
Steve Sharp said:
Didn't have quite the same problem that you are having, but was having trouble. I found these instructions and took care of mine right away. The author, and the link to the site are listed in the instructions. I copied them to notepad so as not to lose them. Hopefully this will work for you.
BlueTooth Sync
I got my bluetooth to work by following Hazymat's guide: Here (http://www.modaco.com/Active_Sync_over_BlueSoleil_Blutooth-t232696.html) Excerpt:
Thanx to a Hazymat over on xda-dev I managed to get it all working, his guide, for anyone else finding this:-
1) On your computer, go into bluetooth settings. Check bluetooth is ON and set to discoverable. Add an incoming COM port, eg. COM5.
2) On ActiveSync on your computer, go into connection settings. Tick all the boxes. If the COM port is greyed out, untick it, close the settings box, go back in, now tick it and set the COM port to eg. COM5.
3) On the K Jam go into bluetooth settings, and remove the connection to your computer.
4) On your K Jam go into ActiveSync, click 'menu' > 'connect via bluetooth' then you should see a message saying 'cannot find an existing bluetooth partnership with a PC that supports ActiveSync. Would you like to set up a partnership now?'
5) Click YES - you are taken to the Bluetooth settings screen.
6) Now click 'new partnership. As soon as you do this, the K Jam will search, and as long as your computer has bluetooth discoverable turned on, your computer will eventually be displayed. Check the computer name showing on the K Jam is the same as the name you gave the bluetooth profile on your computer.
7) On K Jam, click your computer name then NEXT.
Now enter a passcode - any four digit number (remember it) then next
8) When you do this, your computer will pop up with a message saying "a bluetooth device is requesting authorisation". Open this message and type in the code that you gave the K Jam. The next screen on the computer will tell you that it was successful - click FINISH.
9) Back on the K Jam, the screen will now be showing the services available. AS LONG AS YOU FOLLOWED STEP 1 and 2, ActiveSync will be an option, and you need to tick this and press FINISH on the K Jam.
10) Close bluetooth settings, now in ActiveSync screen click MENU > Connect via bluetooth. Your ActiveSync program on the computer should eventually pop up and connect.
The only port you worry about is the incoming pc one. Active Synch does the rest. You must see acitivesync as a service when you connect. I did not see it until I updated my Toshiba Bluetooth stack from thier website. Creating other ports can stop the synch from working.
Click to expand...
Click to collapse
Steve Sharp - thanks a TON for this post...I've been trying to get Activesync to work on my Tilt for about 3 weeks now.
thanks!
I'm struggling to restore BT Dial-Up Networking profile in my i780. I've used known solution for this, but it doesn't work exactly as it should.
After changing HKLM\Software\Microsoft\BTHATCI\Port from '5' (default) to '3', I've managed to get to the stage, where DUN profile is recognised by other devices (my Nokia N810 Internet Tablet in particular), but when I try to actually connect - it fails. However, it seems like really close to the definitive connection - there is BT communication between devices, even Data Call Manager in i780 indicates 'general.t-mobile.uk' data call, while N810 is still waiting for connection and eventually dies.
Because I've had DUN working excellent between N810 and HTC Kaiser, powered by dutty's WM6.1, I've manually checked all DUN-related registry settings in Kaiser and i780 - they are all the same. The only different bits that are relevant here, are \Windows\atcmdint.dll and \Windows\bthatci.dll files. I've tried to copy them across from Kaiser to i780, but I can't - as they are protected by the system.
I don't have any other ideas what could cause such problems. DUN service is detected, I can initiate connection, but I can't get it finally connected. I think mentioned above files are the very last resort in this case. Is there any way of extracting system-protected files from \Windows directory? Or maybe someone has it saved somewhere and could send them out? Thanks in advance for any advise.
I've managed to figure out that phone doesn't respond to ATDT command. It takes AT+CGDCONT=1,"IP","general.t-mobile.uk" initstring correctly (hence Data Call Manager shows APN), but when it comes to ATDT*99# - it fails with the error. I've also tried to dial ATDT*99***X# where X=0-6 but also no luck.
Any suggestions?