Develop Bugs

NEED HELP on O2 xda IIs - upgrade

NEED HELP!!!!
i was trying to upgrade my xda IIs to
"ba_o2asia_14000_923_11200_ship (1.40.00)",
then when it comes to the third part "windows ce" it wont continue.
ived tried everthing like uninstalling and installing the active sync, reboot the pc and soft reset the unit.......
now all that appers on my screen is "USB, v2.07" and i cant use my unit.....
plus when i click connect in active sync on my desktop it wont detect my device.
HELP ASAP!!!

Try a Hard Reset
Try a Hard Reset, Power button + Reset hole at the same time, if it doesnt work after that you need to try again from the begining. try the BA for beginers WIKI http://wiki.xda-developers.com and look for someone with the same device as you in the same country in the forums, check what ROMs they are using in there Sig in order to find the most suitable ROM to try and install that one..
Having said this i am not an expert buy any means, but this is what I have done.
After I just installed my new Radio Rom this morning I was prompted to hard reset, I'm sure this is what you have to do affter a full ROM update, good luck.
The v2.07 dosnt mean youve ruined it so keep trying.. :wink:

o2 xda executive rom update gone awry

hi hope someone can help me.i tried updati ng my xda exec after downloading the rom update from o2, and now my pc doesnt recognise the xda and my xda doesnt start its gone completely bank.i tried holding the softkeys and pressing the reset button, it says hit 0 to get back to factory settings and nothing happens........please it looks like my phones gone comatose

Moved to Uni Upgrade forum form Upgrade general

i believe u r stuck in bootloader
hi
try the following
disable usb connection from connection settings in active sync
then re upgrade the rom , and when you reach the screen where it tells u the rom version (it wont tell u this time) u ll HAVE to wait for few seconds before pressing "upgrade" , hopefully it will work this time
good luck

hi
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected

Does anybody have a solution to the above problem as I now have 2 xda execs in the same situation. It's a bloody nightmare! I understand it's in bootloader mode. Just don't know how to get the xda up and running again without sending it off to O2...
Please help!

LOOK HERE I have been in this situation myself a couple of times. Personally I use method 2 which is at the bottom of the page as it's very easy to follow. I suggest you try this method first.
Regards,
Psi

Those of you having trouble after a Rom Flash. If it goes wrong, start by pressing THE BACKLIGHT BUTTON, THE POWER BUTTON AND PRESS IN TO THE SOFT RESET HOLE ALL at the same time. This should put you back into BOOTLOADER. Then try your rom flash again. If the WM6 fails I re-flashed with the O2 EXEC WM5 first. Forget Active Synch saying it cant etc.
Providing you can just see some very faint words then you are back in bootloader. I have got the original O2 XDA EXEC WM5 Rom files so if you want them, as I can not find out how to put a large zip file on here then I can email it to you. Let me know on
[email protected]

pls i need it send to [email protected]

MAJOR problem loading WM6

I was in the middle of upgrading my version of WM6 and i got unplugged and now it wont resume and the phone is stuck at the loading screen that says "HTC" mobile.htc.com
what the heck do i do? it wont budge.. it wont sync with active sync, it wont resume.. i'm flipping out.

did you try get your phone in the tri color bootloader screen and then running the Hard SPL program again?

god, I'm gonna admit, I have no idea what any of that stuff is. I know the tricolor screen, I dont know what an SPL is.. a friend of mine usually sends me the upgrades for my programs and i just follow his instructions, but as i was loading the new version it got unplugged and when i tried to follow the restore options it wouldnt restore the upgrade.. so I've learned the term is bricking.
Activesync won't reconnect the phone.. it tries, then doesnt recognize the device.. so even if i try to downgrade to 1.04, it wont work because it wont sync with the damn computer.. I hard reset, i soft reset, i got it to the tricolor screen, i tried all the stuff in the hermes upgrade problems thread, but i dont know wtf i'm doing. the file mtty.exe wont work.. it just freezes at whatever screen i happen to get it to, be it the tricolor or the HTC screen.
please, someone help me out.. I apologize in advance for not being as savvy as everyone else, but I need some advice here.

Go the tri colour screen
press both soft buttons (the ones that interact with the screen) and insert the stylus and reset.
from here you can make an hard reset. Whenever my phone hangs (or whatever) I use this way BUT i use the cancel button (X) and the phone simply restarts fine

Did u hard SPL your device?

Costanza said:
press both soft buttons (the ones that interact with the screen) and insert the stylus and reset.
from here you can make an hard reset. Whenever my phone hangs (or whatever) I use this way BUT i use the cancel button (X) and the phone simply restarts fine
Click to expand...
Click to collapse
I hard reset, I soft reset, it freezes either way. The only way the computer recognizes the phone is when I get the tricolor screen but active sync wont connect to FINISH loading the upgrade.

antonlim1999 said:
Did u hard SPL your device?
Click to expand...
Click to collapse
I cant because it wont connect to activesync to install anything else.. i cant dongrade, upgrade, nothing! i cant get to version 1.04 from the 1.06 im running because activesync wont recognize my phone.

I think antonlim1999 mean, did you hard-spl before you even upgrade to wm06 or not ?

sg10 said:
I think antonlim1999 mean, did you hard-spl before you even upgrade to wm06 or not ?
Click to expand...
Click to collapse
I already had wm6, i was just getting a better version that didnt have as many bugs.. I began loading it, it got to 45%, then the cat knocked the cable out and it got messed up.. I dont believe it was hard-spl beforehand.. im gonna go with no.

Could you try to SPL in the tri colour mode (as you have contact between the unit and the PC)?
Link below has all (almost) info
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes

A warning to those with an aversion to reading
This is a warning to those who don't really know what they're doing. Upgrading a ROM on a WinMo device is something that should only be done when you know what you're doing.
Hope your device can upgrade well, but please, take the time to actually read the wiki and forum before upgrading again, for your own wallets sake.

hiddenconcepts said:
I was in the middle of upgrading my version of WM6 and i got unplugged and now it wont resume and the phone is stuck at the loading screen that says "HTC" mobile.htc.com
what the heck do i do? it wont budge.. it wont sync with active sync, it wont resume.. i'm flipping out.
Click to expand...
Click to collapse
You are not even in the right forum, you'll get better help elsewhere.
Start reading here: http://forum.xda-developers.com/showthread.php?t=286755
Hard SPL thread: http://forum.xda-developers.com/showthread.php?t=296722

philjohn said:
This is a warning to those who don't really know what they're doing. Upgrading a ROM on a WinMo device is something that should only be done when you know what you're doing.
Hope your device can upgrade well, but please, take the time to actually read the wiki and forum before upgrading again, for your own wallets sake.
Click to expand...
Click to collapse
thanks, but I've upgraded before to other versions without a problem and I know that pulling the plug out is a bad idea.. the cat jumped up and ripped it out causing it to brick.

What all the smart arses on this site should be telling you is that you don't need activesync to run the upgrade - it will work just fine from the tri-colour screen.
First off, when you get your phone into the tri-colour screen, check the SPL version - if it isn't 2.10 olipro, the first thing you need to do is read the vanx guide's (link in my sig) and get hard SPL 2.10 olipro on there ASAP - this will prevent you from bricking your phone.
If it is already 2.10 olipro, then breathe a sigh of relief as everthing is OK - just put it into the tri-colour screen and run the upgrade again - it should start again with out a problem.
Cheers,
Smiffy.

HELP! I think brick my phone!!

Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all

dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.

henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!

i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?

just Change your ROM..,

hard reset is somthing i dont want to do. Is there any other option?

kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.

same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error

Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.

henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution

Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705

cool, will try that one. thnx

On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me

dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.

Big problem

hi all
i have i-mate pda2. when i updated it and update completed
it stop working , give my only black screen without any words
what can i do plase

amar ali2 said:
hi all
i have i-mate pda2. when i updated it and update completed
it stop working , give my only black screen without any words
what can i do plase
Click to expand...
Click to collapse
have you done the hard reset after flashing?maybe not ryt> if you did try, reflash again...remember hard reset of wm 2003 is different on wm 5 above..

my friend
please can you help me more
i try all ways to restart it
when the update completed the screen become black
and i can't do any thing
and i can't do any update
when i try i found connection error

amar ali2 said:
please can you help me more
i try all ways to restart it
when the update completed the screen become black
and i can't do any thing
and i can't do any update
when i try i found connection error
Click to expand...
Click to collapse
ok..you said you finish the flasing...after that have you perform hard reset?
lets take it one by one..

creso said:
ok..you said you finish the flasing...after that have you perform hard reset?
lets take it one by one..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=630416
read this from chef tony..if you red it b4..read it again...it will solve your problem 100%

ok
no i didn't hard restart after update
when i finished the phone is be die
plz
my email if you want to talk in messenger for best
[email protected]
[email protected]
i'm online now
thank you too much

i did
i read it
but i can't go to Bootloader Mode and don't see any words on the screen
what can i do more

amar ali2 said:
i read it
but i can't go to Bootloader Mode and don't see any words on the screen
what can i do more
Click to expand...
Click to collapse
do you have full charge of battery before you start the upgrading?

i know that problem
i also had that problem and used to hard reset into bootoptions mode. after that i started via softreset
hope it helps