Develop Bugs

help ... xda exec won't start after rom flashing

somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...

Which ROM did u reflashed ?

Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!

Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!

Have u tried reflashing it again via bootloader mode ?

niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)

Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)

niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!

U shld better get it replaced .

niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.

niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!

Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.

still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..

trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?

Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks

blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..

alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....

I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.

alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working

This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back

white screen problem

I start with saying "Im so stupid"
I try to Expanding the Storage memory and I didn't notice I have dto down grade to WM2003
no I have a wite screen and a dead BA
I tryied to reinstall WM2003 but it got stack
upgrading to WM5 finished but now I have a white screen
does anyone have any suggestions?
please help

Dropped?
Did you drop your device? The white screen from startup to fully booted usually is a sign of the LCD not being atttached properly. Usually, the system starts normally in the backgound while you still have a white screen.
1. Attach your device via the active sync and see if you can connect to the device.
2. If you can connect to it, Read my post here.
http://forum.xda-developers.com/showthread.php?p=1094440#post1094440
Old school fix.

thans but I maneage to solve it
what happened is that I formated the ROM when using WM5
I downgrade it back to WM2003 and formated the ROM to the right size

white screen, please hep
during charging suddenly my XDA IIs suddenly become white screen, but I can connect with Antisync.
Please help, how to solve this problem step by step.
Thank you in advance for advice.
Agus

Did you try this ?
mingwei_sun said:
during charging suddenly my XDA IIs suddenly become white screen, but I can connect with Antisync.
Please help, how to solve this problem step by step.
Thank you in advance for advice.
Agus
Click to expand...
Click to collapse
I had the same problem. and I put up alink above. Did you try it ? Here is the link again.
http://forum.xda-developers.com/showthread.php?p=1094440#post1094440

white screen, please help
I already try follow instruction link your mention, but still can not be done.
thank you, please advice

mingwei_sun said:
I already try follow instruction link your mention, but still can not be done.
thank you, please advice
Click to expand...
Click to collapse
Have you tried Opening it ? There is a PDF link here in the forums which gives your detailed instructions on how to safely dissassemble your Device. Search the forum for it and Ye shall find.
It may be that you dropped it or something happened that your LCD is not functioning properly. Open it up and make sure that all the connections are tight.

dear cyberdrakula,
I can not find the link pdf for safety disassemble device, please give me advice.
Thank you so much.

mingwei_sun said:
during charging suddenly my XDA IIs suddenly become white screen, but I can connect with Antisync.
Please help, how to solve this problem step by step.
Thank you in advance for advice.
Agus
Click to expand...
Click to collapse
I don't know if the problems are the same
but, can you go into bootleader mode? (power + record and SR)
what happen if you soft reset the device?
was the device dropped?
try to use the device for incoming calls? does it works?
best for now

white problem
Thank you for your advice, I try bootloader (Power+rec+Softreset), and now my XDA IIS is coming back normal
thank you

so now... (after done a good did) I can go to sleep with a smile on my face
hope my wife don't think that I cheat on her

Hard SPL Black screen :(

Help me please!
i want install new rom on my diamond but when i install the HARD-SPL signed or unsigned on my diamond the screen is black and the connection with Activesync fall.. and the progress bar remainig on 0%
i try to start manual spl.exe from my diamond but i have the same problem...
please help me i had also hard reset the device but nothing yet
please please help me!!! i read on the forum but i don't see any solution for my problem
Thank you

fpgiuliano said:
Help me please!
i want install new rom on my diamond but when i install the HARD-SPL signed or unsigned on my diamond the screen is black and the connection with Activesync fall.. and the progress bar remainig on 0%
i try to start manual spl.exe from my diamond but i have the same problem...
please help me i had also hard reset the device but nothing yet
please please help me!!! i read on the forum but i don't see any solution for my problem
Thank you
Click to expand...
Click to collapse
Place manualspl.exe on to the root of the diamond.Run it(your screen will go back! After this, you should run the hardspl.
After it is finished, you should be able to install any rom...

oddball1 said:
Place manualspl.exe on to the root of the diamond.Run it(your screen will go back! After this, you should run the hardspl.
After it is finished, you should be able to install any rom...
Click to expand...
Click to collapse
oddball thanks for reply but i try to do this
but after the starting of splmanual the screen go black and the connection with activesync fall
whyyyyy!!!!?????
please help me

just leave it for a while.. it fails because your device is now in a bootloader mode.. let the RUU finish its job

racerx_ said:
just leave it for a while.. it fails because your device is now in a bootloader mode.. let the RUU finish its job
Click to expand...
Click to collapse
ops...
thank you!!!

Phone always boots to bootloader

Hi guys,
Can anyone help me here ?
When I try to start up my Phone, it always loads the bootloader ...
I tried running reflashing a rom and task29, but no help there :s
Does anyone have an idea what to try ?
Tnx
Nick

Some people with the same problem said that their batterie was broken. Can you try another batterie?

I'll give it a try
Will let you know ...

Lennyz1988 said:
Some people with the same problem said that their batterie was broken. Can you try another batterie?
Click to expand...
Click to collapse
Nope, doesnt help.
Tried with a friend's battery, and have the same result.
Also tried using his phone with my battery and worked perfectly.
Any other ideas?

Trickass said:
Nope, doesnt help.
Tried with a friend's battery, and have the same result.
Also tried using his phone with my battery and worked perfectly.
Any other ideas?
Click to expand...
Click to collapse
Just to ask: You're not (accidentally) holding down the volume key when you press the power key (or reset) to turn on, are you? That puts it into bootloader.

MCbrian said:
Just to ask: You're not (accidentally) holding down the volume key when you press the power key (or reset) to turn on, are you? That puts it into bootloader.
Click to expand...
Click to collapse
No, I'm not doing that
I thought maybe it got stuck though, something like that :s but when I do press it, I hear a pretty clear "click", so I guess it's not broken at all...
Also, I noticed that when I try to reflash a ROM, the "current image" (or whatever it's called) is blank ...
(I mean the thing that sais the version number of the currently installed rom)

Okay, sounds dumb I know, but did you flash a new rom after flashing Task29?
It is used to wipe the OS out completely BUT you then have to re-install a new OS...
Just thought I'd ask.....

Same issues.
Same issues on my touch pro 2.
The only solution i find in order to make it boot is with mtty on a Windows xp pc with no activesync.
Perform a
set 14 0
task 8
then the phone boot on the os but on the next reset stay in bootloader !

ultramag69 said:
Okay, sounds dumb I know, but did you flash a new rom after flashing Task29?
It is used to wipe the OS out completely BUT you then have to re-install a new OS...
Just thought I'd ask.....
Click to expand...
Click to collapse
Lol yeah I know that
Thanks anyway
Frederic.james said:
Same issues on my touch pro 2.
The only solution i find in order to make it boot is with mtty on a Windows xp pc with no activesync.
Perform a
set 14 0
task 8
then the phone boot on the os but on the next reset stay in bootloader !
Click to expand...
Click to collapse
Hm, I'll see if I can find a Windows XP pc somewhere and try ... MTTY doesn't seem to work with Win7 x64

Trickass said:
Lol yeah I know that
Thanks anyway
Hm, I'll see if I can find a Windows XP pc somewhere and try ... MTTY doesn't seem to work with Win7 x64
Click to expand...
Click to collapse
Hummm i have see somwhere a howto for mtty on W7... but i'm a little lazy i have choose to do this on a old windows xp
But this command are just temporary i'm searching for something more stable !

Some news from my Rhodium Stuck in bootloader
I have try to Hardspl it (Olinex 0.85)
The good news is i have manage to do it, the bad news is after that even the
set 14 0
don't manage to make it boot.
After a while searching, (thanks wiki of another phone) i have find those command :
password BsaD5SeoA
set 14 0 # Maybe it's usless now but in fact i don't know
set 1 0
task 8
And now i'm back to my start....

I tried using the MTTY commands, and when I did it the first time, the phone booted and performed its "first run setup" thing.
After rebooting though, it went back to the tricolor screen, and I can't get past it anymore, even with the same MTTY commands ...
Any other ideas ? :/

mtty, a lot of post on the internet...
hi,
I think we are a the same point !
I have find a way to start a boot with the HTC screen but the phone tel me that a txt file is missing on the sd card ???!!!???
with mtty :
boot
yes it's quite simple why i haven't think of that befor i don't know... but that didn't solve my problem at all.
I have send a mail to HTC in order to have a diferent point of view but all they said to me is doing a hard reset (who didn't do anything...)
I will post the avancement of my test but i feel a little stuck.
Note : After searchin on the internet, the set 14 0 tel to the phone to boot on the os after a flash (sometime the phone don't reconize the end of flash)
the set 16 0 (or set 16 1) disable (or enable) the RUUNBH tag on boot loader.

More Infos...
I have find a post on a other forum whos said that a defective battery could result to an unstable beaviour of the phone.
I have let it without battery for a day and, today it has directly boot on the OS.
I have ordered a battery on ebay and waiting for it maybe the solution ?

Frederic.james said:
I have find a post on a other forum whos said that a defective battery could result to an unstable beaviour of the phone.
I have let it without battery for a day and, today it has directly boot on the OS.
I have ordered a battery on ebay and waiting for it maybe the solution ?
Click to expand...
Click to collapse
Oke, I will try to take out the battery tomorrow as well ... Although, I tried using a different battery and it didn't help ...
Right now, I managed to boot using mtty set 14 0 > task 8, which seems to work
(sometimes, I need to do the task 8 twice in a row ...)
So as of now, I managed to flash a stock rom onto the phone, and only have to try and reset hardspl back to stock as well.
Waranty here I come ...

lol mine is out of waranty, and it's the solution i ve find everywhere !

did you try hard reset by holding the call and hang up button together when you power up the phone.
last time I remove a program and tha cause me to boot ot a black screen after teh bootloader. Hard reset fix the issue as it return teh phone to the sotck setting of the rom.

PUTALE said:
did you try hard reset by holding the call and hang up button together when you power up the phone.
last time I remove a program and tha cause me to boot ot a black screen after teh bootloader. Hard reset fix the issue as it return teh phone to the sotck setting of the rom.
Click to expand...
Click to collapse
yes, i've try it (HTC has send me the same advise) and... same issue !
In order to done the hard reset (who didn't execute when the phone is to boot in bootloader) i have do a set 14 0 and reset with power and holding the two call hang and power.
But thanks for the advise !

Frederic.james said:
lol mine is out of waranty, and it's the solution i ve find everywhere !
Click to expand...
Click to collapse
Out of warranty ?
How old is it then ?
Mine is just under 1 year old, so I'm lucky I guess ... and I hope

Trickass said:
Out of warranty ?
How old is it then ?
Mine is just under 1 year old, so I'm lucky I guess ... and I hope
Click to expand...
Click to collapse
Hum it's the phone of a firend who give it to me... and he has buy it on e-bay.... for the waranty sound difficult to retreive a bill and... I will search till i find something to do

[Q] HTC touch pro2 start-up problem

I done a factory reset my cell phone and it die before unable to complete the reset
now every time a start my phone it show start up screen and it took 2 minutes and then it shows" please wait while your device is starting first time" and it restart same thing happening its not going further den that pleaseeeeeeeeeeee help me pleaseeeee i done hard reset soft i cant plug my data cable cause it doesn't get start please help mee

hussnain11 said:
I done a factory reset my cell phone and it die before unable to complete the reset
now every time a start my phone it show start up screen and it took 2 minutes and then it shows" please wait while your device is starting first time" and it restart same thing happening its not going further den that pleaseeeeeeeeeeee help me pleaseeeee i done hard reset soft i cant plug my data cable cause it doesn't get start please help mee
Click to expand...
Click to collapse
Hello and welcome to the forums,
Try to enter the bootloader mode and reflash the rom. You will find references how to do this all overall Rhodium xda forums.

i try bootloader bro but it didnt help and i cant plug my data cable cuz it keep restart and so i cant change the rom

I kinda have the same problem.. pllllzzz help me dude '?

hussnain11 said:
i try bootloader bro but it didnt help and i cant plug my data cable cuz it keep restart and so i cant change the rom
Click to expand...
Click to collapse
muhjum said:
I kinda have the same problem.. pllllzzz help me dude '?
Click to expand...
Click to collapse
Flash from SD. No need for the data cable.

Just rename the rom file to RHODIMG.nbh and place it on the SDcard.