When I run camera, it has a message
Camera
Failed to initialize camera.
Please reset the hardware
36001:100:2
Click to expand...
Click to collapse
I've try T-mobile WWE 1.42 and 02 WWE 1.40, it has same message.
Please help me. The hardware or software is failed ?
I would give this a try
good luck
http://forum.xda-developers.com/viewtopic.php?t=35218
I've try it but it isn't ok. I think my bug is different
Related
Hi guys, i've recenlty purchased an Orange M2000, its brand new and when i tried to use the camera it says
" Failed to initialize camera. Please reset the Hardware. 36001:100:2 "
I've done with the soft reset, hard reset but the problem persist.
Any idea how to solve it??
Thanks in advance!
Hi
1. Dig in the forum some more.
2. Check if you have the latest ROM.
Anyways. You shouldn't be getting such message on hard-resetted device.
Probably you'll have to replace your unit.
Good luck
Hi,
I have a similiar problem.
When I try to record a video a get this mesage:
"
Unable to record video.
36001:106:0
Failed to add the video track
"
I have the TuMa 1.3 WM5 but with the a previous version of the WM5 it was the same.
The photo mode works fine.
This is nasty, please help me.
Tnx
Togakure, I've already answered your problem in other thread.
Your problem is that TuMa has bad MPEG encoder. You have to use Motion JPEG.
Good luck. Both of you
After i install WIN5 Upgrade all the shortcut keysare still working except for the camera, well i tried to use camera2k5_v1 but still not working error " Failed to initialize camera. Please reset the hardware... 36001:100:2 "
can you help me to fix this problem or did forgot somethings else? im begging your kind support, need to fix this problem or else my dad gonna kick me off..
current rom version after upgrade.
R 1.02.00
G 1337.32
D 5.03.02 wwe
Happy New YEar!!
simply downgrade to the original WM2003SE, available at wiki suppose
~><~
Please Help
Today! i update my PDA WM5 to WM6 (use schaps WM6pro_WWE_4.0_full_rc)
have a error 294, and my PDA Phone do not working,
help me ,Thanks!
HTC01X said:
~><~
Please Help
Today! i update my PDA WM5 to WM6 (use schaps WM6pro_WWE_4.0_full_rc)
have a error 294, and my PDA Phone do not working,
help me ,Thanks!
Click to expand...
Click to collapse
Please provide more information about your device, such as:
Bootloader type (SPL): You will see this when you enter the bootloader
Did flash finish correctly (eg. 100%)
Do you see tri color screen (Bootloader), or your device froze at Windows splash screen?
Add some more technical info and I am sure somebody can help you, but frankly I have no idea what error 294 is.
HTC01X said:
~><~
Please Help
Today! i update my PDA WM5 to WM6 (use schaps WM6pro_WWE_4.0_full_rc)
have a error 294, and my PDA Phone do not working,
help me ,Thanks!
Click to expand...
Click to collapse
I'm not a tech guru like many on this forum - so I can't really help too much. BUT, I have found the error codes which seem to indicate that error 294 is an invalid vendor ID which suggests that you aren't super CID, aren't using olipro hardSPL or DES to flash with and are trying to flash a ROM which requires a vendor ID.
This is the link I got this info from and I hope someone else can be more helpful.
http://forum.xda-developers.com/showthread.php?p=1177823&highlight=error+codes#post1177823
Good luck...
Ok this is my problem : When i press camera button or i start camera application or video recorder application it doesn`t start nor say some kind of error ... it just sits around like nothing was pressed. I tried hard resetting ... i tried new wm ... nothing did the trick ..... It all started in summer when i was just taking some pics and suddenly camera went off ... for about 10 more mins it says failed to initialize camera after that no reaction ... please help (
can no one give advice ? Can it be because of wm 6.1 or above ? I mean i had 6.0 then upgraded to 6.1 worked for a while after that the camera crashed and now 6.5 and still no improvment ... can someone help ?
djkline said:
can no one give advice ? Can it be because of wm 6.1 or above ? I mean i had 6.0 then upgraded to 6.1 worked for a while after that the camera crashed and now 6.5 and still no improvment ... can someone help ?
Click to expand...
Click to collapse
Have you tried to flash back to a stock rom? Try it. I your problem persists maybe its a harware problem.
djkline said:
Ok this is my problem : When i press camera button or i start camera application or video recorder application it doesn`t start nor say some kind of error ... it just sits around like nothing was pressed. I tried hard resetting ... i tried new wm ... nothing did the trick ..... It all started in summer when i was just taking some pics and suddenly camera went off ... for about 10 more mins it says failed to initialize camera after that no reaction ... please help (
Click to expand...
Click to collapse
As the fellow aboveme said flash back to a stock ROM.
You can find stock ROMs in the stickis located at the top of the forum page. If all else fails it may just be a hardware issue.
Hope this helps!
well that i just tried today with roms from this post :
http://forum.xda-developers.com/showthread.php?t=381726&highlight=excalibur+stock+rom
and they all failed after 3% saying they couldn't update my rom . I currently run 3VO 6.5 last update ROM.
Any help please .
djkline said:
well that i just tried today with roms from this post :
http://forum.xda-developers.com/showthread.php?t=381726&highlight=excalibur+stock+rom
and they all failed after 3% saying they couldn't update my rom . I currently run 3VO 6.5 last update ROM.
Any help please .
Click to expand...
Click to collapse
If you get the 3% error while flashing you should read this, http://forum.xda-developers.com/showthread.php?t=493266. Additionally, you should look here http://forum.xda-developers.com/showthread.php?t=329605.
Dear All
I used the Topaz-HardSPL_V5_00R5_183HSPL for my Topaz device and work successful and install new ROM 6.5 then my friend give me his Topaz to do the same .Now I can't do the same there's masege appear ( Spl in not for commercial used........) the dice doesn't accept the official room also ??
then my friend try again in his PC but nothing work Please advice and help to fix this problem
Best regard
Nayel
Nayel said:
Dear All
I used the Topaz-HardSPL_V5_00R5_183HSPL for my Topaz device and work successful and install new ROM 6.5 then my friend give me his Topaz to do the same .Now I can't do the same there's masege appear ( Spl in not for commercial used........) the dice doesn't accept the official room also ??
then my friend try again in his PC but nothing work Please advice and help to fix this problem
Best regard
Nayel
Click to expand...
Click to collapse
Maybe your friend does have a chinese copy.
Take out battery and compare if the stickers are the same on both phones
both are same Made in Taiwan
please advice
Any help professional