Very annoying problem with radio rom 1.13 - MDA III, XDA III, PDA2k, 9090 General

.. sometimes the telephone stops it's funcionally.
If I call the thelephone dont'call, in this period of block I can't receive any calls or sms until I active the fly mode and reactive it.
But the activity led and and the network icon on the top (near the G) works fine.
what can I do?!
I also have installed the Unidirectional Audio Patch from clubimate.

old problem. read the wiki and live with it or upgrade to wm5.

i have the same problem with Version 1.06.02
I dont think its a Problem of the Windows itself, or al least i dont want to admit it, i will try to upgrade to 1.11.00 and post my experiance here.

Related

Weird Skype Issue

Hi folks, I have a Qetk 9090, the rom is WWE 1.22 the Ext rom I don't remember but I it is not the latest one. Anyway
Before the 1.22 rom, I tried Skype on Wifi no problems everything went well, not if I receive a call or make one after 30 seconds the call crash, the Wifi seems to crash as well, if I stop it and restart it, the Wifi software won't work but the wifi light will blink... I need a soft reset to make it work, if I do the same test at thome calling my PC with my PPC, no problem... what is going on? Is that a Wifi Issue or Skype ?
Thanks
My XDA IIs has always done this. Skype know about this issue, and there is a thread here about it as well. They (skype) say that its the Blue Angel, not skype. It does not appear to be only the blue angel either.
Interestingly, for me it works if I stand next to my AP while using it. Hardly convienient!
Nigel
i use mine over bluetooth activesync on my xdaII (no wifi) and encounter the same problem.... only happens when i use skype though.
I have had major problems with Skype before version 1.1.0.6. This version doesn't have a problem on my IIs. As a matter of fact, I leave Skype and FWD on for more 48hrs without it crashing. I have had experinces with having Wisbar advance installed and random application would crash. These voip apps would not have the chance of being installed if I didn't have a wifi network.
I also have 1.1.0.6 but experience the same symptoms. I've read some skype-related issues on xda-dev and believe it could very well be the wifi's subpar quality.
Just now I tested a skype call sitting right next to the router - no problems at all. moved into the living room - other party reported distortions in my voice. moved further away, into my room - distortions worsened, until finally the wifi connection dropped to nearly "zero" (no curved lines around the wireless lan manager icon on Today screen). immediately following, connection totally terminated, and the pda's internet will not WORK at all, despite still showing status of "connected". only solution is a soft reset. :evil:
nomadman, did you find that the 1.40 ROM upgrade helped at all? as a last ditch effort, I will probably try migrating over to 1.40/1.12radio to see if things improve. ( see http://forum.xda-developers.com/viewtopic.php?t=22429&highlight=skype )
kia do not upgrade the rom counting that it will increase the range of wifi or bt. i have not noticed any distance increase upgrading from 1.33 and the last radio version. i upgraded because i wanted to learn how to upgrade the rom. i can get 10 to 12 meters from my AP. thats with a hallow wall and a cement exterior walled home.
nomadman said:
kia do not upgrade the rom counting that it will increase the range of wifi or bt. i have not noticed any distance increase upgrading from 1.33 and the last radio version. i upgraded because i wanted to learn how to upgrade the rom. i can get 10 to 12 meters from my AP. thats with a hallow wall and a cement exterior walled home.
Click to expand...
Click to collapse
Thanks for the warning. I seem to consistently get BAD reception from the router to my room, which is less than 8 meters away
I just confirmed that the Skype that comes with ROM 1.40 is 1.1.0.7... so I may just give THAT a go afterall as I'm all out of options..
Are you getting good distance with a desktop PC? I wasn't aware that Skype is included in any ROM. At least it wasn't included in my 1.40 upgrade.
good news to report: I finally took the plunge and upgraded to 1.40ROM, and my Skype via Wifi issues seemed to have dissappeared!
Very prelim info and will need further testing tonight at home, but just now at the office I was able to talk for over 8 minutes with NO disconnections. veletron and others who have this problem, this may just be the fix!!!
Skype is definitely included in 1.40, at least in the 1.40 I-mate rom that I upgraded to today. The version included is 1.1.0.7.
Great news m8. can you extract the 1.1.0.7 cab and upload it. the skype site only has 1.1.0.6 available for download.
Skype 1.1.0.7
Try here:
ftp://xda:[email protected]_ROM_140176_WWE/Default_SkypeForPocketPC.CAB
Please post the version number and I will update the wiki page for that EXT Rom. Thanks
Thanks for pointing the right direction m8. Indeed this is Skype 1.1.0.7.
Anytime dude. Be sure to post your experiences with 1.1.0.7.

I dont see who's calling me

Hi. I've got problem because i don't see who is calling me. Only thing is network name in upper right corner. Some time ago it happens occassionaly, but at now this is very often. I can say - i rarely know who's calling me.
I've been looking for topics with similar poreblem, but only i found says it can be network problem. I've called my network operator and all is set ok. And identification works well on my previous phone, nokia 7650. So this is'nt a network problem. So what it is, and how to get rid of it ? Please help because its very annoying.
My configuration
Radio: 1.12
Rom: 1.40
ExtRom 1.22 (from my operator, not cooked)
regards
mine does that sometimes... it started after i installed something, ionly thing is i installed that much stuff, i cant remember what it was so i cant really uninstall it to fix or to see if it fixes. if there is a way round it, then id like to know how to fix it too, tho it seems to only happen when certain people call, so its not too bad.....

Difficulties with phone after upgrading to the new ROM

Hi folks ...
I face this problem with the phone many times a day. I can confirm it happens each time there is a failed call attempt (you couldn't make the call) ... the only way is to switch off the phone and turn it on again.
I thought it's something with RSU 1.09.00 but it happens also after downgrading to 1.08.00 ... so I think it has to do with the new ROM. It tells the signal maybe unavailable while you can see it is on the max level.
Edit: last observation ... it can receive SMS :?:
Any one faced this experience ??
Me Too
I Have the same problem :-(
Me Too
I Have the same problem :-(
Ive noticed in your screen shot the active sync is trying to connect with the internet which will prevent you phone from making the call. To give a example .... if I was downloading a file using my universal and someone tried to call me they would get my mail instead of ringing as the phone is using the internet connection however as soon as the file downloaded the phone would break the internet connection and allow the call. Hope that made sense!
I thought the service is supposed to interrupt the download if the phone rings as the primary function of the device is a telephone and secondary as a mobile computing platform.
numanoids said:
I thought the service is supposed to interrupt the download if the phone rings as the primary function of the device is a telephone and secondary as a mobile computing platform.
Click to expand...
Click to collapse
That's what I always thought but even with my trusty old imate jam I found if I got a call as I was downloading say mail the call would not make it though, try downloading a biggish file then ring your phone number at the same time I bet it will not make it This as ALWAYS been the case btw - don't matter which rom you have. oh and this applies to gsm (2.5 gprs) only as 3G is a totally different ball game!
thx for all inputs but it happens even without activesync running ... it doesn't work again except by switching the phone off then on ... the most exciting part: u will never notice that your phone is frozen till you try to make a call :evil: ... this will make me to go back to the old rom
More observation on this issue ... I made a hard reset and started without any problems with the phone part ... I restored a system backup and all went well ... the phone issue appeared again when I paired my BT headset with the device ... this might mean something to do with the BT stack ... I believe it happens mostly during or after using the headset :?:
Any similar experiences ?
Biso007 said:
Hi folks ...
I face this problem with the phone many times a day. I can confirm it happens each time there is a failed call attempt (you couldn't make the call) ... the only way is to switch off the phone and turn it on again.
I thought it's something with RSU 1.09.00 but it happens also after downgrading to 1.08.00 ... so I think it has to do with the new ROM. It tells the signal maybe unavailable while you can see it is on the max level.
Edit: last observation ... it can receive SMS :?:
Any one faced this experience ??
Click to expand...
Click to collapse
Same Problem Here... I was going to downgrade to 1.08.00, but now I may not... Don't want to lose the speed increase, so don't want to downgrade ROM...
back again ...
I made another hard reset and staretd without any s/w installed for a week .. the phone seemed to be stable but with the same annoying BT disconnect issue ... the above issue started to appear again after installing some phone related s/w like Smart Filter and PZP ... I think the new Radio ROMs starting with 1.08 have an issue with such applications that would continously check on phone traffic or have OS hooks to catch some events ... this wasn't the case with Radio 1.02 or 1.03 ... I 'm thinking to get back to 1.03 since I got nothing from 1.08 or 1.09 except quick battery draining!!

Incoming CALLS LATENCY

I have a a Qtek 9090 with latest WM5 on it and i have a big problem with my incoming calls if my devide it's off and someone calls me only ather the 4th or 5th ring i start to see and hear my PPC ringing if my device only has the light off and someone rings my PPC start to ring imediatly.
Does anyone have any ideea or solution about this ?
What versions of Rom are you using, did it came with the 9090 or have you upgrade it? The Rom version of your 9090 could be the problem, try to upgrade it (but be very very carefull as upgrading is a very sensitive proccess)
Let me know
GoodLuck
Sidd
The version i got it didn't come by default i have the latest one which i took from the forum WM5 TuMa 1.3 yesterday i did a full flash with it again and it's a little bit better but no big difference
Hi Miker,
Try to install "SPB Tips & Trick", its a tweaking software for all these sort of problems. I did have the problem with my Alarms, my alarm was not working if my phone is in sleeping/standby mode, but this software has fixed this problem. Try to download the trial version, install it on the phone (not on Memory card), and let me know if this would fix ur problem.
Good Luck
Sidd
http://www.spbsoftwarehouse.com/products/tipsandtricks/?en
I have reflashed it and it work almost perfect just 1 second latency but I have also installed that program you told me about i'm searchin' now for a serial or keygen

The phone is not ready wait 15 seconds and try again

i am a newbie of Vodafone (PH20B2),
Device Version is
Rom Version : 1.31.00 WWE
Rom Date 12/13/04
Radio Version : 1337.42
Extrom Version : 1.31.175 WWE
with Windows mobile 2003 Second Edition
the problem is that sometime i could not receive the call , the message occurs "unable to answer the call".
When i try to tab phone icon the message " The phone is not ready wait 15 seconds and try again" occurs .
anybody could help me what to do.
I am getting the same problem why is this?
I have a o2 xda IIs, i have installed WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) Updated [30.11.2007]
i face the same problem, furthermore i realize when the battery is near 30% da phone becomes buggy in the sense dat messages stop getting sent and after soft resets da trouble is the network stops getting detected only after 5 minutes i see network signals,as soon as i hookup the phone with power the sms problem is immediately solved!
It may be helpful to note i have not installed any third party software and the phone has been hard reset only a few days ago!
Does the parite virus affect the phone? i installed parite infected .exe software through AS 4.5 and as a precaution hard resetted the phone following that!!
furthermore tapping answer doesnt work and the call automatically gets disconnected!!!
Try Upadating your ROM to Xplode's one. And yes one important thing , always keep your bluetooth on ( you may uncheck the beam option). This may solve your problem.
basharatwant said:
Try Upadating your ROM to Xplode's one. And yes one important thing , always keep your bluetooth on ( you may uncheck the beam option). This may solve your problem.
Click to expand...
Click to collapse
NO dont do that. it will drain your battery faster if bluetooth is on.
make sure it is OFF and also check the infrared (Beam).
You're battery might be failing to power up the phone module.
Try a new battery.
I've experienced some used battery.
Below 30% is very critical for ALL PocketPC operations, this is the point where some glitch tends to pop-up because the battery cant support
the power requirement of the hardware in which the software was using
(Ex. Phone, Camera, LCD, Speaker, Mic, Digitizer) thus, it fails bigtime or sometimes crashes.
Except if your battery is newer where the 30% which steadily and accurately give power to our BA.
And make sure you terminate all your programs if you've finished using it, if it is running it might affect the power consumption because it is still present in the memory.
anyone can sync without using original cradle or bluetooth? i m having problems with non-ori cables..on usb port.. help pls!!!
plusdesign_np said:
i am a newbie of Vodafone (PH20B2),
Device Version is
Rom Version : 1.31.00 WWE
Rom Date 12/13/04
Radio Version : 1337.42
Extrom Version : 1.31.175 WWE
with Windows mobile 2003 Second Edition
the problem is that sometime i could not receive the call , the message occurs "unable to answer the call".
When i try to tab phone icon the message " The phone is not ready wait 15 seconds and try again" occurs .
anybody could help me what to do.
Click to expand...
Click to collapse
Does this happens right after powering on ?
It is normal to take a long time to boot up the SIM Cards configuration and specially SIM contacts onto the phone's memory.
JP
OMG i realize after 35% my phone starts getting buggy, messages dont get sent :s phone hangs and has to be reset :O...can anyone tell me if a new battery for a blue angel is a good idea? and furthermore I am willing to invest in a new battery can anyone send me links for a cheap O2 XDA IIS battery which will last rigorous use? can anyone verify stability issues after 30%?
The phone is not ready. Wait 15 secondsd and try again. !!!
And can't open Options for the phone and not able to send SMS.
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
Radio 1.12
Trying reflashing and also with another PV WM6 2000 and trying to send SMS immidiately after reflashing but no luck! Though it worked in the first days of switching to WM6.
Could it be the Radio 1.12 version problem?
Thanks for helping!
Ok see if you SIM is perfectly making contact. I had the same problem. I did put some bit of paper on the over the SIM . So that after closing the back cover it fitted snuglly to its slot.
basharatwant said:
Ok see if you SIM is perfectly making contact. I had the same problem. I did put some bit of paper on the over the SIM . So that after closing the back cover it fitted snuglly to its slot.
Click to expand...
Click to collapse
I can receive SMS but not send them out!
And the phone is working though the Phone Options says the same thing about waitinf for 15 seconds and cannot be opened at all!
Thanks for your kind reply.
surely the battery keep it powered by da charger and den try
or try a new battery like i said in the 5th post of this thread.
SilverSamurai said:
or try a new battery like i said in the 5th post of this thread.
Click to expand...
Click to collapse
I did charge the battery and while in the cradle the phone Options and sending out SMS says the same thing about waiting for 15 seconds.
But the phone itself works with incoming and outgoing calls and I can receive the SMS !!!
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
Radio 1.12
Could it be the Radio 1.12 version problem?
Thanks for helping!
try to upgrade your radio. i have 1.15. then let us see what happens.
SilverSamurai said:
try to upgrade your radio. i have 1.15. then let us see what happens.
Click to expand...
Click to collapse
Which upgrading method of the 2 that are described in the XDA Wiki?
Last time I tried both it seems it didn't work for me.
One says that is just Radio updating and the other the whole WM operating system?
Kind Regards
www.myspace.cn/taijiyoga
Just try the radio updating only. The one in the wiki is good.
or copy the radio.nbf to where nk.nbf is. then flash both only if you want.
if you just want the radio. delete the nk.nbf.
then launch MAUpgradeUT_NoID.exe
I had a very same problem.
The problem was solved by buying a new battery.
At least for me, the only problem was the battery. Now everything is going fine...
Yup. Mostly, but not all, problems are battery related. our BA's really a powermonger when it comes to eating battery mAh
so the most common advice for a hardware failure or such is a change of battery.
note: even our desktop PC's malfunction if it is running undervolt.

Categories

Resources