Incoming CALLS LATENCY - MDA III, XDA III, PDA2k, 9090 General

I have a a Qtek 9090 with latest WM5 on it and i have a big problem with my incoming calls if my devide it's off and someone calls me only ather the 4th or 5th ring i start to see and hear my PPC ringing if my device only has the light off and someone rings my PPC start to ring imediatly.
Does anyone have any ideea or solution about this ?

What versions of Rom are you using, did it came with the 9090 or have you upgrade it? The Rom version of your 9090 could be the problem, try to upgrade it (but be very very carefull as upgrading is a very sensitive proccess)
Let me know
GoodLuck
Sidd

The version i got it didn't come by default i have the latest one which i took from the forum WM5 TuMa 1.3 yesterday i did a full flash with it again and it's a little bit better but no big difference

Hi Miker,
Try to install "SPB Tips & Trick", its a tweaking software for all these sort of problems. I did have the problem with my Alarms, my alarm was not working if my phone is in sleeping/standby mode, but this software has fixed this problem. Try to download the trial version, install it on the phone (not on Memory card), and let me know if this would fix ur problem.
Good Luck
Sidd
http://www.spbsoftwarehouse.com/products/tipsandtricks/?en

I have reflashed it and it work almost perfect just 1 second latency but I have also installed that program you told me about i'm searchin' now for a serial or keygen

Related

XDA IIs and Bluetooth Problem.

When I turn on Bluetooth on XDA IIs, I got this error message :
"The bluetooth radio radio failed to turn on due to insufficient driver memory available. You must perform a normal reset before you can turn on the bluetooth radio."
Anyone can advise how to resolve this ? Soft reset does not cure the problem. Thanks.
have you upgraded to bluetooth stack version 3900 ???
if you have then im fresh outta ideas, if you havent find this at our FTP site,
ftp://xda-developers.com/
login and password = xda
got the same problem when i installed one of the bluetooth upgrades on its own. then i installed the new rom and everything was fine. not sure where the connection is but thought id share my problem
Problem solved.
By the way, what is the latest version of ROM for XDA2s, and where to get it from ?
Thanks.
So I was wrong.
After upgrading the BT upgrade, things was OK yesterday. But this morning i got the same error again.
Went to ftp://xda-developers.com/ as suggested, can anyone mentioned the filename of the ROM mentioned by thakkergaurav above ?
Thanks.
The latest ROM is 1.40
You can find it here: http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Hmmm..... :?
This BT issue is really getting to be NOT FUNNY! :evil:
Running the new ROM 1.40 and BT 3900 I'm now getting the "no sound" problem on the handset and caller cannot hear me on a HS801!
I use the turn on/turn off BT trick or soft re-set and the handset is OK for a couple of hours but the HS801 still does not work even though its OK with my old PocketPC,a nokia and a Motorola V3!
Is there any consistancy with this problem? It seems the different ROMs, Radio Stacks and BT versions are being effected.
Well, emailed the tech support, and all they can say was ...
"There is a ROM upgrade in development which is in the final stages.
We request your patience as we are trying to release the upgrade as soon as possible."
And that was 2 weeks ago.
even my bluetooth is upgraded to 3900,
i get the same error message also..
i cannot believe a 96mb memory is still not enough
i never get this kinda nonsense when i was using the 5450 ipaq
my today plugins was all over the screen and I had never encountered low memory...
I had the same problem but I have a Harrier not a BA so I thought it was related to that and you BA guys wouldn't get it.
Anyway, the solution on the harrier was to
-turn flight mode on
-soft reset
-turn bluetooth on
-turn flight mode off
Hope this helps
Here is a possible solution from wiki:
The ExSenetoR wrote:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Have not tried this myself, but I believe others have had success with it. You may want to save the file somewhere else, in case you want to reinstate it later...
Hope this helps
Chris
I posted this in another thread.
It really does look like a combo of the 1.40 ROM and 1.12 Radio Stack that is causing this problem (in this case, anyway. See sig). After trolling various forums, it seems that both BT build 3900 and 3500 are having the same issues.
IMHO it seems that the Blue Angel is trying to send the call to my HS801 even when BT is not activated.
Has anyone had a good look at the current radio stack? I've tried contacting Broadcom (BT chipset supplier) but it has been 3 weeks with no answer.
I've done the Run_BTTrayCE_10.lnk workaround but this is only a bandaid and I don't really have enough experience to attempt to cook the ROM. Any ideas?
I have a Motorola HS801 as well and I can receive calls just fine but when I make calls the other party can't hear me. I'm giving up on the HS801 - it's a cheapie anyway and I don't know of anyone else who's got it working either. Running BT3900

Qtek 9090 - incoming phone calls

Hi,
My Qtek 9090 acts quite strange from time to time. Yesterday I didn't receive any calls or sms, which I didn't think of any further until my girlfriend told me she called like 4 times and sent several sms to me.
I looked at the device, but no missed calls or any sms. The device was working 100% and I had good signal strength, but I couldn't receive any calls or sms
After a soft reset I got all the sms etc.
Has this happened to any of you guys ?
A cellphone is useless if it doesn't work properly and doesn't give you any information about this either.
XDA IIi
I have experienced exactly the same problem...
I have the same problem on my i-mate jam.Perhaps it's a wider problem with the os?or htc devices.People tell me all the time to turn my phone on,and i try to explain it's been on all day!
same here
same problem here! my gf also thrashes me 4 the same stuff!
i have XDA IIs.... 1.40rom...radio 1.13...
I wonder if its related to a specific program that we all are running, or if its just the OS.
Its extremely annoying, and I am considering selling my unit.
Maybe we should contact Microsoft or the like, if its a general issue.
yep, same here :?
Same exact problem. Mine is an i-mate PDA2K running ROM 1.40.00 WWE.
I have the problem quite frequently, sometimes after a bunch of alarms jam up without me dismissing them properly. Sometimes, it just happens for no reason.
I read somewhere that a phone.exe (not sure) application could die, which basically takes care of the phone management.
Tks,
MC
Had the same problem here :evil: What seems to have helped, is the fact that every morning at 6AM Sprite Backup makes an automated full backup of my PDA and then soft resets it. Maybe this problem is somehow linked to the uptime of the device, dunno.
My device is a QTEK 9090 with CE ROM 1.22, Radio ROM 1.13.00 and a custom Extended ROM.
See here...
http://forum.xda-developers.com/viewtopic.php?t=22239

Very annoying problem with radio rom 1.13

.. sometimes the telephone stops it's funcionally.
If I call the thelephone dont'call, in this period of block I can't receive any calls or sms until I active the fly mode and reactive it.
But the activity led and and the network icon on the top (near the G) works fine.
what can I do?!
I also have installed the Unidirectional Audio Patch from clubimate.
old problem. read the wiki and live with it or upgrade to wm5.
i have the same problem with Version 1.06.02
I dont think its a Problem of the Windows itself, or al least i dont want to admit it, i will try to upgrade to 1.11.00 and post my experiance here.

Phone problem - neither myself or caller can hear anything

Hi!
I have a problem with my QTEK9090. From time to time when either myself or caller calls to my PPC we can not hear anything! When I try to call back immediately the same procedure occurs. The only thing that temporarily solves this is then I do a soft reset of PPC. Until next time.
I have upgraded from original version 1.12.00WWE to 1.22.00WWE and to 1.40.00WWE. I got a beta version from technical support for radioversion (1.13.10) but without any success. I also have got a new SIM card.
Any ideas?
i have the same problems, and the same sys op... and i had applied all patch...grrrrrrrr :evil: :evil: :evil:
Is your BT on? If not turn it on and leave it on.
good luck
Hi!
Thanks for your replies. I will leave the BT on today and check any differences. Have you had the same problem yourself?
Hi!
matrix70 which version are you running? Have you tried different versions? Have you tried to contact technical support or Telia for this problem?
i'm italian and i bought ba in greece. I just have upgraded with 1.40wwe version, applied all patch...but the proble still here...grrr..i discover that it's coming when i try to use ba in fastest mode.. switching from an application to another in a very fast mode, or trying to recall quickly a number that it's busy.
matrix70 from version did you upgrade from, do you remember?
same problem here, i did read in another thread that this is a known problem and can only be solved by moving to wm5.
I have radio version 1.06.02 and will move to 1.11.00 to try my luck
now i have update from 1.40 to 1.42 and the problem it's seem disappeared.... but with this version i can't sync my calendar....wath a lolling problem ....
I have run with BT on for some days and the phone problem is not occured once.
Great to here that problem with phone is solved in next version.
I remember there was a thread a few months ago I think. I had the same problem when I got my IIs last July, but I just turned off the BT and up to now theres no prob..... I havnt upgraded my version yet, I still use the 1.31 coz everythings working fine
Search the forums for Unidirectional Audio patch. This will fix the problem. But you probably do need the 1.40 series ROM.
im having the same issues, anyone know how to fix it up???
sometimes cant make or receive calls till i make soft reset.
thanks in advance.
im running rom 1.40.
couldn't find "Unidirectional Audio patch"
anyone have any idea where can i find it? and if its really fixing this annoy problem
thanks in advance.
Hi!
You can find the patch here http://wiki.xda-developers.com/uploads/PDA2k_UniDirectional_Patch.sa.cab). It didn't help me at all. I still have problem when BT has been activated nextcoming calls I still can't here or the caller can here anything. The only thing that have helped me, from a tip in this forum, is to always have BT activated.
Regards,
Fredrik
Thanks for the answering m8.
I actualy have been experimented these issue with bluetooth off...
just tryed with bluetooth actived all time and seems to be working.. anyway don't like this fix at all .. consuming extra batery to make the phone working properly is ridiculous
i will try out the fix anyway.
Thanks.
there was a pollon here about this a few months back and 76% of the users in this forum experienced this problem to some degree. Never found a proper fix.
how come manufacturer companies havent take notice yet? or iven the supplied the proper fix to this? is a very important issue...
other licenses than Qtek 9090 got the same issue??? pda2k? and the other clones???? know about it???
for the moment i have to say by enabling bluetooth all time as working well so far ...

Any One with Call History/ Call Records Time Issue?

Hi,
i am facing this weird issue of certain calls that come into my Hermes (now flashed with K's Lite ROM and 1.48.00 Radio) appearing on call history as a future event like a call that I'd receive on 10 am (current time which my PDA is set to) today would show the time1.30 pm today!!!! These items always sit first on the list and redialing becomes an issue. :confused
It's not happening with all the calls, I suspect if it's the calls that I receive while the phone's on standby.
i used to have this issue in some other ROMs too and am not too sure if it's a ROM thing. I downgraded from WM6.1 to WM6 to check this. Need help badly on this Thanks.
Riyaz
Could someone pls help???
Can some one Pls tell me what to do.. need Ur help badly
Rgrds
Riyaz
Ill think it could be a bug in your "old" rom.
Just flash:
1. official AT&T WM6 Rom
2. Radio 1.54.30.10 (best one i have ever tested)
3. PDAVIET WM6.1 19400 (or 19209) Black & Clean Rom
Ill now running the 19209 for about 2 Weeks without any problems and its horrible fast
cu
pOpY
Thanks
Hi popy2006,
Thanks for the info pal.. I am a great PDAVIET fan myself for prophet... Cloudyfa has ensured that I still havent thrown away rophet and seems never will
i've tried black and clean and green and clean before but both gave me serious hard resets (evenafter AT&T flash)
so thought I'll go back to the WM6.
thanks for the info anyway
Riyaz
Hi. Try to disable SD Card Power Management. I have found an other thread here: http://forum.xda-developers.com/showthread.php?t=378750
Whis guy have the same problems. After deactivating the SD Power Management, his ROM running quite well.
Hope this helps you.
cu
pOpY
Seems working - testing Now
Hey pal,
seems to work testing now... Hope this stays same Thanks
riyaz

Categories

Resources