Related
Hi everbody,
first sorry for my english. i am german.
So now, this moring my MDA 3 has made an hardreset and since there, when pushing the phonekeys, contacts and calandar are opening!
So what could i do? I had made an Rom-Update (newest from T-mobil germany) but nothing helps.
Could I change this settings manually in the regestry? Any Ideas?
Thanks for responding.
Schralle
OMG THE SAME THING'S HAPPENING TO ME TOO! It just happened.
I have a Cingular Siemens SX66 (PH20B1) with
ROM v1.33.10 WWE
Radio v1.02.10
ExtROM v1.33.110 WWE
It just suddenly soft-reset, but now the phone answer (green) and phone end (red) buttons don't work and open Contacts and Calendar simultaneously. Furthermore, my navigation keys don't work either! Whenever I push it in any direction, it automatically loads up the Contacts. The other hardware buttons work fine, though.
I tried restoring from a previous backup, and that didn't work. Then I tried doing a hard reset and not restoring a backup, and that STILL didn't work. I then did a restore from a backup after my hard reset and nuthin!!! I'm at a COMPLETE loss....this is startin' to scare me...any ideas? ANYONE?
Thanks!!
--Q
How did you guys go with your probelms.
I have a similar problem with mine after a low battery experience.
My buttons are only working sometimes, especially the multi-directional button.
I have read I should try a new battery, but haven't got one yet.
DLC
Turns out mine had just died. The buttons just didn't work, and it was very likely a hardware problem. I got a replacement in the end.
Good luck!
--Q
i just upgrade from others rom to duttys rom
and guys i was shock
firs this rom is very fast the fastes
second the volume of the calls very lowd damn what did you put in dutty
i hear very lowd so i turn low the volume
third the battery life unbeliveble i use it for one and a half day with 90%
correct me if im wrong but this rom rock
igot jasjam
1.40 spl
1.41 radio
yea it rocks
i don´t know whats wrong with the volume.. it only happens on some devices, i´ll try to look into it. but it´s kinda hard because the bug doesnt exist on my device
LOL DUTTY MY FRIEND YOU DODNT UNDERSTAND ME I JUST SAYIED
THAT THE VOLUME VERY GOOD
I DONT KNOW HOW YOU DID IT BUT IN THIS ROM THE VOLUME IS THE STRONGEST DURING CALLS I HEAR EVERY BODY VERY STRONG
THATS VERY GOOD
I EVEN TURN THE VOLUME LITTLE BEAT DOWN CAUSE IT WAS TO LOWD
THANKS DUTTY
Dutty, just one problem, I have noticed that in the morning when I try to turn on my Cingular 8525 phone it doesn't turn on. I leave it in the charger all night and when i hit the power button it does nothing. I have to reset it and it works fine but it gets annyong because the alarm doesnt ring and emails don't download.
I have your HERM_Dutty_WM6premium_Full_v2_CustomRUU43 rom.
Hi everyone,
This is my first post, I'm an IT consultant, but by no means a phone expert! I have been upgrading my HTC Universal fine over the last year, and would consider myself a beginner (especially in contrast to you guys!)
I upgraded ro Radio 1.18 and the Ultimate WM5 posted a few days ago. Really good results, and great work - however the actual phone component keeps breaking, and I have to HARD reset.
The phone screen opens fine, and when you try to make a call, it freezes that screen, although you can still return to the Today screen. I'm unable to bring back the phone screen until a soft reset - and then it all starts again.... until I finally hard reset and then I can make calls again.
I'm not going to load any software today, to see if it happens again whilst "clean", but all I had put on was voice command, and a few SPB tools and tomtom yesterday.
So I'll let you know if it goes bad again later, but I thought I'd let you know in case this issue is already raised elsewhere and the search didnt bring it up. To be honest, its not an easy problem to hunt an answer for, as the symptoms are quite generic and broad.
Thanks very much for whatever you can suggest in the meantime,
Kind regards,
Mike
Orange M5000 on O2
Hi again, phone still working ok after 9 hours - and have only done the following do far:
Activesync setup to exchange, and push activated
O2 modem gprs connection created
Dare I do anything else, before I bust it!
Cheers,
Mike
1) My opinion, it seams radio ROM 1.18 has some issues
2) Even any other Radio ROM I would suggest you to keep the phone Band in Manual (GSM or 3G). Keeping the Radio Band in "auto" and by low level signal leads that the Device keep surching for better signal and that cause the device to freeze.
The symptoms you describe sound familiair.
Only I have had the same problems with WM6 and any radio rom.
The radio always seems to get stuck, and after a couple of disabling/enabling the phone the radio really gets stuck and I can't connect to the internet anymore.
I then have to soft-reset the device once, but it usually hangs or crashes, a couple of soft-resets are needed to 'reboot' the radio rom or something.
This was with the first build WM6 roms and radio 1.15 Darkforce/Pdaviet
I don't have this problem now using the cooked WM6 roms using the second build WM6 core (new build) and radio 1.15 or 1.18
Having the same issue radio 1.18 and KDS's WM5 ultimate so just gone back to WM6 from PDA viet that I was running with no problems.
Psi
Thanks Mike for bringing up the issue.
My V1640 (Voda Uni) exhibits similar problems: phone dialer freezes & unable to exit the screen. Going back to today screen by pressing hangup button or using today start menu works fine but unable to bring back the dialer screen unless by soft reset.
Unfortunately, I can't isolate the problem yet to either the Radio Version or the OS ROM version or the Device. The freeze/hang problem appeared in WM6: L26 V7 & PDAViet 2.10.11 as well as in WM5: Js 1.90.96 & KDS Ultimate Edition using V 1.15 & 1.18 in all the above. Tried Darkforce WM6 2.10.02 last night with 1.15 radio rom & the freeze issue came up once already.
I think this is a program/app compatibility issue & now trying to find out the culprit but nevertheless would try to downgrade radio down to 1.11 & will report back any progress.
Cheers.
radio downgrade
Hello everybody! I would downgrade my Radio version, where can i find the necessary files? Which one do you suggest me? I have a qtek 9000 running wm6 2Things version.
thank you!
Hi All,
I am also running a Voda Uni upgraded last month to WM6 with Radio 1.18.00. Since then I have a problem -- I do not know if is related to the thread or not but I thought I would describe it since it relates to GSM 1.18 and GSM crashing.
When power gets low (30-50%) and I attempt a to make a call (or, more often, when I use GPRS) I get a pop-up dialog box that says "GSM Radio Crashed. Reboot in 30 seconds." The phone then kills itself and attempts to reboot. It dies completely midway through the boot. All is well again when I switch to a new battery --at least until the power gets low.
shrines said:
Hi All,
I am also running a Voda Uni upgraded last month to WM6 with Radio 1.18.00. Since then I have a problem -- I do not know if is related to the thread or not but I thought I would describe it since it relates to GSM 1.18 and GSM crashing.
When power gets low (30-50%) and I attempt a to make a call (or, more often, when I use GPRS) I get a pop-up dialog box that says "GSM Radio Crashed. Reboot in 30 seconds." The phone then kills itself and attempts to reboot. It dies completely midway through the boot. All is well again when I switch to a new battery --at least until the power gets low.
Click to expand...
Click to collapse
Have the same problem. I have been using thingonasprings WM6 for a month with radio version 1.15. And the last week when I try to make a call I get that dialog box "GSM Radio Crashed etc" I havent noticed if its only when battery is low (think its always low these days thoug I just bought a new one a few month ago)
hello to all,
I've searched many white screen problem threads, but didn't find any similar.
i am sorry if I missed one.
I am asking you for help.
I have spv m3100(hermes 100)
I bought it used and it had instaled htc europe wm6 rom. after few days I decided to flash black x rc.
before i did this, I made super cid with RUU_HERM_Unlock_v3a.exe and than also flash hard spl v7. everything was fine until few days ago when butons stop working. and at the end the green led was blinking all the time and green and red phone light was on all the time as well (also if phone was in flight mode).
I decided to flash official rom and I checked my bootloader it was showing ipl 1.04 and hard spl 2.10.
I flashed WWE 3.54.255.3 with radio 1.48.00.10 and everything went just fine at the end was written congratulation....
it costumized and make one or two soft reset and than I start to instal my favorite programs (few spb, smartmovie, dictionary...).
I do not remember why but after I set regional settings I did not soft reset with stylus but I put out battery when phone was stil on.
after that screen is white all the time. I made many soft resets, hard resets, try to enter bootloader but screen is all the time white.
when i turn it on and it is white I connect it to computer and it connects normal and i can also explore my files, but screen is all the time white.
I left it more than 20min without battery and try again but is stil the same.
after that I keep battery out of phone and leave it sop over the night. in the morning was stil the same.
i do not know what to do.
please help.
thank you and best regards
miha
since you mention a problem with the buttons, it *could* be hardware related. There is a thread up here where those problems (connections usually) are explained.
would you be so kind and tell me which thread you meant.
it seemed nothing wrong is with my phone only colors are missing (everything is white). i think also touchscreen is working. if I turn it off with power button (holding for few seconds), it beeps and you get message if you realy want to turn it off. because I know exactly where yes button is, the phone goes off.
I apreciate every help I can get.
thanks
I had a white screen issue .. do this in this specific order
1) make sure you have olipro latest version (use the search)
if problem persists
2) Use an WM5 rom and see if the white screen is happening
if problem perisists
3) Replace the battery (cheapest option)
if problem perisists
4) Its a hardware fault and you will have to send it off to get fixed or replace the unit .. sorry
alive again
I solved the problem.
thanks to this thread
http://forum.xda-developers.com/showthread.php?p=1698828#post1698828
and this instructions http://inuchanbt.blog54.fc2.com/blog-entry-100.html.
thanks to people who answer my problem
Medon
I have the same problem, the link to the blog below takes you to How to disassemble your device.... could you find the correct link & repost pretty please?
Thanks,
Andy
hi i am having a problem with the xda iis.when i turn on the ba it pops up a massage, in the screen,,, The file phone service cannot be opened.either its not sighned with a trusted certificate or one of its componets cannot be found.if the problem persists try reinstalling or restoring this file.
And with that massage on the window the phone DOESNT WORK.
i cant hear the other persons voice when someone calls me, or i cant make calls and hear this dodo on the line and then the caller.
i tryed to flash the phone with some other roms,but no luck the problem still there and so the massage on the window ev time i turn on the ppc.
What should i do?any ideas?the phone was working perfectly and i dont know why this happened?
is there any way to fix this prob my shelf? couse i am afraid how much it will cost me if i send it to a repair store for ppc
anyone that can help me??? heeeeeeeeeeeeeeeeeeeeeeeeelp
Start with:
1. Dod you try Hard Reset and using it without restoring any backups?
2. What ROM do you use now? (It it is WM5, did you allow RadioROM to start after first boot?)
i hard reset the device after the flash but the problem still there
the rom i am using is win 6,1 i tried all the roms from here but the problem again still there
i dont know how to put this radio rom you said.
this message (The file phone service cannot be opened[...]) is totally out of any logic.
1. What rom (link/filename/name - version is not enough) have you installed?
2. How exactly did you do the Hard Reset?
3. What bersion of the RadioRom you have (number next to the letter R while booting)
the radio rom is 1.06.00
the rom i am using now is ROM 6,1 0S 19716 hoangdat_vt
to hard reset on the BA I pressed the on off button and the reset button the same time as i read it many times
There are 3 massages in the screen that appear ev time i turn on the ba
First the phone service massage,then the fine pbar cannot be opened etc
and the sms_alert_ fix cannot be opened e.t.c
so i dont know what to do.
singer12 said:
the radio rom is 1.06.00
Click to expand...
Click to collapse
Consider upgrading to 1.13 or 1.15.
singer12 said:
the rom i am using now is ROM 6,1 0S 19716 hoangdat_vt
Click to expand...
Click to collapse
Please try to use officially available ROMs, so for example those from Xplode or Helmi
singer12 said:
to hard reset on the BA I pressed the on off button and the reset button the same time as i read it many times
Click to expand...
Click to collapse
This is NOT A PROPER Hard Reset - you do it different way in WM5/6. What you did was a plain soft reset.
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4
When the upgrade is completed, you must perform a Hard Reset.
Press and hold the "Power" button, and then press the Reset Button. Colored stripes (the bootscreen) will appear on the screen.
* If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
o Quickly press "Record" & "Camera" before the versions appear at bottom right
o OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
Click to expand...
Click to collapse
singer12 said:
There are 3 massages in the screen that appear ev time i turn on the ba
First the phone service massage,then the fine pbar cannot be opened etc
and the sms_alert_ fix cannot be opened e.t.c
so i dont know what to do.
Click to expand...
Click to collapse
I think that a proper HR will solve all the problems.
hi thanks for the answer.i did all that you said.i upgrated the radio rom to 1,15 i flashed the ba with a win 6 rom from helmi just to be sure.and i did a hard reset the way that you said it.The good news.these windows massages on the screen that the phone service cannot be opened etc, dissapeared
the bad news?? STILL NO PHONE.
i still cannot hear the other person and make calls .its like that somethin happened to the sound volume or to the phone.i start to think that maybe this problem was a bug from a previous rom i used, but it still hasnt fixed.
so any other solution?if there is any
So here we go - you did a proper HR
Now back to the problem with phone - I don't understand when you exactly mean by "no phone". For a moment I though you mean "phone subsystem does not work, no carrier (Operator) signal detected, no calls possible". But I noticed, that you write "I cannot hear the other person" - for me it suggests that you in fact initiated a call and the other person can hear you?
If so:
1. Did it ever work? When it stopped (what you did that could cause it to stop working).
2. Can you hear ringing tone? (I suppose you can easily hear dialing pad signals for each digit on the phone pad)
I have an idea, that a speaker from GSM module (it's a separate speaker) could just get disconnected/broken.
what i meant by saying no phone is that when i place a call i cant hear the ringing tone on the line and the other persons voice,and the caller cant hear me.
if a speaker is broken can it be fixed ?
and if it is disconnected how can i connect it back
So you say (I understood so), that phone module works fine? You can place the call, other party can call you (and you can hear the ringtone) plus you can place the call, other side can pick up the call and the only problem is that BA transmits no sound (at all - in neither direction: you cannot hear and the other party neither)?
I'm still not sure about all the details. If both speaker and microphone don't work, this might not be problem with diconnected mic and speaker (low chances of breaking both at the same time) but might be something simpler.
And yes: most of the broken things can be repaired the only problem might be the cost.
ok i ll check it out thanks for the reply.
Same problem, after hard reset
singer12 said:
hi i am having a problem with the xda iis.when i turn on the ba it pops up a massage, in the screen,,, The file phone service cannot be opened.either its not sighned with a trusted certificate or one of its componets cannot be found.if the problem persists try reinstalling or restoring this file.
And with that massage on the window the phone DOESNT WORK.
i cant hear the other persons voice when someone calls me, or i cant make calls and hear this dodo on the line and then the caller.
i tryed to flash the phone with some other roms,but no luck the problem still there and so the massage on the window ev time i turn on the ppc.
What should i do?any ideas?the phone was working perfectly and i dont know why this happened?
is there any way to fix this prob my shelf? couse i am afraid how much it will cost me if i send it to a repair store for ppc
Click to expand...
Click to collapse
I have same problems with some of my applications. Many soft resets, and hard reset. Problem still persists. Donno what to do then. Can someone help so that i can have my installed applications worked?!
________________________
Xda O2 III WM6.1 Pro
CE OS 5.2.19199 PV DVH
ROM Ver.: 6.01.02.DVH
ROM date: 02/20/08
Radio: 1.15.00
Proto: 1337.45