Related
Dears,
I faced the white screen the first time last Thu. I migrated my device (Jasjam) to Black Pro 2.0 on Wed. and started to get the white screen on Thu.
I was going arround it by few turn-of turn-on untill today morning when I noticed that the screen shifted down by 1mm. In fact more precisly, rotated down 1mm. Starting with the splash screens, the Windows booting screen and the Windows later. Everything is rotated down by the 1mm meaning what is disapearing from bottom is showing on top!
I got to the device through the mtty and ran task 2a, everything was okay. Then I ran task 28 and task 8. The deveice booted with the sae shifting problem. I installed the latest LVSW 05Apr07, the same problem still although the Windows is working fine. Switching the device off will not switch the screen off immediatly, the screen goes in fade-away type of action for about 2 minutes until it totally powers off.
Any idea? Does that mean I am loosing the mobile? Please help.
Appreciating all help.
Regards.
attot1239 said:
Dears,
I faced the white screen the first time last Thu. I migrated my device (Jasjam) to Black Pro 2.0 on Wed. and started to get the white screen on Thu.
I was going arround it by few turn-of turn-on untill today morning when I noticed that the screen shifted down by 1mm. In fact more precisly, rotated down 1mm. Starting with the splash screens, the Windows booting screen and the Windows later. Everything is rotated down by the 1mm meaning what is disapearing from bottom is showing on top!
I got to the device through the mtty and ran task 2a, everything was okay. Then I ran task 28 and task 8. The deveice booted with the sae shifting problem. I installed the latest LVSW 05Apr07, the same problem still although the Windows is working fine. Switching the device off will not switch the screen off immediatly, the screen goes in fade-away type of action for about 2 minutes until it totally powers off.
Any idea? Does that mean I am loosing the mobile? Please help.
Appreciating all help.
Regards.
Click to expand...
Click to collapse
Remove the battery for 5 minutes and re-insert it back..see if it will fix it or not.
attot1239 said:
Dears,
I faced the white screen the first time last Thu. I migrated my device (Jasjam) to Black Pro 2.0 on Wed. and started to get the white screen on Thu.
I was going arround it by few turn-of turn-on untill today morning when I noticed that the screen shifted down by 1mm. In fact more precisly, rotated down 1mm. Starting with the splash screens, the Windows booting screen and the Windows later. Everything is rotated down by the 1mm meaning what is disapearing from bottom is showing on top!
I got to the device through the mtty and ran task 2a, everything was okay. Then I ran task 28 and task 8. The deveice booted with the sae shifting problem. I installed the latest LVSW 05Apr07, the same problem still although the Windows is working fine. Switching the device off will not switch the screen off immediatly, the screen goes in fade-away type of action for about 2 minutes until it totally powers off.
Any idea? Does that mean I am loosing the mobile? Please help.
Appreciating all help.
Regards.
Click to expand...
Click to collapse
what bootloader version are you running?
Many thanks trashcan for your quick response. I have removed the battery for 5 minutes, the screen was still showing that last image. I keept the battery out for 15 minutes untill the screen was totally off. Reruting the battery resolved the ****ing issue, thanks again.
Also thanks to walshieau, the device has IPL-1.01 and SPL-1.40.Olipro.
Regards.
Regards.
The bad part of the news is that the white screen is still comming!!!
Any clue?
Regards.
I thought of sharing this with you
I have just done the follwoing:
> Updated (again) the device with SSPL-1.40
> Re-flashed the device Force through SSPL the new OS (LVSW)
The phone looks better, however I got the white screen two times in about five minutes.
Wat else I should do? Please share your experience.
Regards.
attot1239 said:
I have just done the follwoing:
> Updated (again) the device with SSPL-1.40
> Re-flashed the device Force through SSPL the new OS (LVSW)
The phone looks better, however I got the white screen two times in about five minutes.
Wat else I should do? Please share your experience.
Regards.
Click to expand...
Click to collapse
Read?
1) Ensure that you have 1.40.Oli by checking the bootloader screen.
2) Run the upgrade, but, select AUTO DETECT! DO NOT CLICK FORCE SSPL!
3) White screen gone
LegolasTheElf said:
Read?
1) Ensure that you have 1.40.Oli by checking the bootloader screen.
2) Run the upgrade, but, select AUTO DETECT! DO NOT CLICK FORCE SSPL!
3) White screen gone
Click to expand...
Click to collapse
not quite, the ROM image affects some devices, I'll redo Black 2.0 like I redid LVSW if this keeps happening.
It is getting worse now ... I do not know what is happening
Good morning,
Thanks LegoLasTheElf and Olipro for you input, I started to patch the device again and although everything was normal, the update program sayed the connecting was lost and took me to a recovery screens which just went into a loop (repeating the same steps with no hope).
The device is on the bootloader (tri-color) screen. I tried getting into it using the mtty and set 14 0 (as I found it on on of the posts) however it did not help.
Could someone tell me please to to get the device to boot normal again.
Regards.
attot1239 said:
Good morning,
Thanks LegoLasTheElf and Olipro for you input, I started to patch the device again and although everything was normal, the update program sayed the connecting was lost and took me to a recovery screens which just went into a loop (repeating the same steps with no hope).
The device is on the bootloader (tri-color) screen. I tried getting into it using the mtty and set 14 0 (as I found it on on of the posts) however it did not help.
Could someone tell me please to to get the device to boot normal again.
Regards.
Click to expand...
Click to collapse
yeah... flash my patched LVSW with CustomRUU
Olipro said:
yeah... flash my patched LVSW with CustomRUU
Click to expand...
Click to collapse
Yeah, that works!! That is how I solved my whitescreen.
thx Olipro!!
Many thanks Olipro for your continued help.
I have gove through your topic on the white screen and I posted you a reply there. The megaupload site is blocked in my area, if possible please mirror it on another site, i.e. 4shared.com
Regards.
I have exactly the same White Screen symptoms and more recently, the 1 mm screen shift problem too. I removed my battery for 15 mins and the screen shift temporarily went away but on the next reset, it is back :-(
I have SPL-1.40 Olipro but am unable to download the LVSW to resolve White Screen as Megaupload never works in my area. Can someone post that ROM to Rapidshare please.
Thanks a ton!
Olipro said:
yeah... flash my patched LVSW with CustomRUU
Click to expand...
Click to collapse
Where can I get the CustomRUU? The device is now on the BL screen and the tools are being able to communicate with it.
Regards.
Alright, I have the same problem here. Now before anybody comes on here and tell me to read this and that, I've tried everything.
From going back to 1.01MFG, mtty the OS, use 1.40, use customRUU, leaving the battery out for 5mins, 15mins, hours, over night. Even tried going back to the original ROM and still nothing, the same damn white screen. As far as I am concerned, the intervals are actually getting worse and it comes on more often.
Anybody has any other ideas beside the ones that are posted everywhere. Trust me I've been trying to fix this for over a week now and I have read everything on here.
Any help is appreciated. Thanks guys
YES This was my first solution
http://forum.xda-developers.com/showthread.php?t=298520
bcrx7 said:
Alright, I have the same problem here. Now before anybody comes on here and tell me to read this and that, I've tried everything.
From going back to 1.01MFG, mtty the OS, use 1.40, use customRUU, leaving the battery out for 5mins, 15mins, hours, over night. Even tried going back to the original ROM and still nothing, the same damn white screen. As far as I am concerned, the intervals are actually getting worse and it comes on more often.
Anybody has any other ideas beside the ones that are posted everywhere. Trust me I've been trying to fix this for over a week now and I have read everything on here.
Any help is appreciated. Thanks guys
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=298520
@BCRX7- After the WHITNESS from LVSW and then black1.2 I used this QTEK rom. It got rid of the white screen. Then I used Olipro's modified ROM. I am now running BLACK2.0 with no problems. Props OLIPRO and JasJammin!!!
i solved my white screen in a different and strange way, but easy
you may not believe it, but i did it, i solved the problem of my white screen in a very simple way.
i put my hermes in the fridge for 20 mins at 2C and i keep it on and put it over night.
(no charging, no sync, .... nothing)
this is the way how i solve it.
try it at your home, and tell me what happened to it.
thanks for all.
Hardware or software issue?
Hi,
Did anyone figured if white screen is hardware or software related issue? I wonder if there is anybody that doesn't got any whitescreen since they upgraded to WM6. I observed that the number and the severity of the white screens was different depending of the cooked ROM used (I have Olipro 2.10 SPL, Radio 1.50). Unfortunately I didn't count the white screen number for each version in order to choose the right one
I want to be sure I have tried all software methods before I will send my Hermes to the mobile operator for a replacement (if it is a hardware issue). Thanks in advance for any suggestion!
Hi all.. I had the same prob and it developed into this: http://forum.xda-developers.com/showthread.php?t=303872
So its a HW problem... You can get it back to normal by hitting(yeah not the nicest thing to do with a toy that has high price tag) the phone when its turned off completely -if its hibernating it doesnt work. If you have warranty time left -get it fixed. If not -you can try opening the hermie and doing whats told on 8th page in thread I mentioned. I got mine fixed by changing the front keyboard circuit board..
Hello everybody,
I seem to have a major problem with my XDA Orbit: Not only it shuts down with no apparent reason so that I have to reset it, but it shows sometimes the dreaded "white screen of death" - from now on "WHISOD". The screen all of the sudden slowly goes white and sometimes shows dark vertical bands. After that - if I am lucky - I can reset the device, however a couple of times I already had to hard reset end even reflash it.
I have already checked software and plugin problems and would rather say that it seems to be a hardware problem. Any ideas out there. They would be highly appreciated.
Best regards,
Smack
i had the same problem and as at now my phone is dead becuase i did not flash it with the original rom. look for the rom it came with and flash it to the phone ,like how u first got the phone or u will loos ur phone very soon
I am not at all sure if it has to do with the ROM. I have tried different ROMs to check the error but it appeared with all of them. However the next time I will try again with the latest official ROM.
Thanks for the comment and your help. BTW Did you send your Orbit in for repair?
Regards,
Smack
Hi, do you use the uspl before every new rom install? Try it.
I have the same problem, my htc3300 is almost dead I think. No way I can even turn it on, allways end in the windows screen, and it was because I didn`t use the uspl before last rom install.
Give it a try, and let us know.
See ya.
Thanks. No flashing problem. I have flashed a couple of devices (always unlocking them before ;-) )and have had no problems whatsoever.
The problem I mentioned is not connected to any earlier flashing. The device works a couple of hours perfectly. However suddenly it starts to behave like crazy.
Now to your problem: If you can get into boot loader modus you will most probably be able to unlock your item. Search for uspl and download it. Then get into boot loader mode (press voice recorder button and power button while resetting the device) and you will get a three colored screen. Then connect the USB cable. You will see "usb" in small fonts on the screen of the device. Now you can run uspl. With a little luck the device starts again. However you can flash it again with a fresh ROM the same way (after unlocking it). This may (!) work.
Regards,
Smack
Hello,
I have the same problem, I already hard reset end even reflash my p3300 many times with different ROM.
I even tried running it for some time with and without the micro SD, ending with the same result: the screen of death.
Any ideas , tips, anyone ?
Thanks,
Roundi
Ok, I tried the following: Just take the battery out for six or seven hours and insert it again. The device seems to run smoother. Will keep you posted. Tell me if it works out for you.
Regards,
Smack
Ok, just removed the battery, I will leave till tomorrow morning.
I will keep you updated.
Thanks,
Roundi.
I have same problem here - though mine is the second phone and the fifth motherboard I've had. HTC just don't seem to able to fix it. I'm now trying to get a refund.
Hi, Jem.
Yes that's something I have thought about too. Did you you use the original ROM? However right now the system seems to be more stable. I have had only one blank screen after removing the battery (and one shut down).
Regards,
Smack
I have just put in the battery and switched on the phone after almost 24h.
So far so good.... I will try to use it for a while and will let you know.
Regards,
Roundi
Had the same problem again, when using Mortplayer. I have Mortplayer installed on the SD card. Could it be that the problems arise, when there is heavy usage of the SD Card?
Any ideas are welcome.
Regards,
Smack
Again it went SOD shortly after turning it on. I didn't launch any applications.
I am stuck here.....
I have a problem with my Artemis. I'll try to decribe the problem and if anyone can help me i will be thankful.
When is Power on it works few minutes than it freeze and screen desapears. After that I try to power but it doesnt work. It needs time to accept the Power comand and I don't know where problem is... (i thing that it's about temperature but i'm not sure)
I tryed to flash with later software and win mobile 5 but the same thing happens.
Any help?
Please specify which applications you have installed and eventually which ROM.
I strongly recommand you to flash your device with latest ROMs like Black and Blue one or others (see the Windows mobile 6 section of Artemis)...
A hard reset would solve your problem anyhow I suppose.
Are you overclocking your CPU with some software? like BatteryStatus for example?
Please let us know...
Gues i fixed the problem
It not was about ROM... I have tryed flashing with Black & Blue, Vanilla etc. but the problem was the same. When I put the Phone in the pocked it freezes. Meybe it was problem with cooling.
Anyway I used a tutorial how to upen the phone, i opened it, cleaned it (using spray for clean) and now it works fine i gues.
Thanks a lot...
Regards
rrezarthajrizi said:
It not was about ROM... I have tryed flashing with Black & Blue, Vanilla etc. but the problem was the same. When I put the Phone in the pocked it freezes. Meybe it was problem with cooling.
Anyway I used a tutorial how to upen the phone, i opened it, cleaned it (using spray for clean) and now it works fine i gues.
Thanks a lot...
Regards
Click to expand...
Click to collapse
can you please put that tuturial in this post????
thanks
jayss said:
can you please put that tuturial in this post????
thanks
Click to expand...
Click to collapse
Wiki is your friend....
http://wiki.xda-developers.com/index.php?pagename=Artemis_Disassemble
I had the same problem with mine....
The phone is fecked take it back to the makers and get a replacement..
I had the exact same problem with my P3300. It's a malfunction in the Motherboard. I've called the dutch helpdesk and because a hard reset didn't do much good the PDA was picked up later that day to be sent to Eurotwice, the repair station in Belgium. I got my phone back 2 weeks later, I started it and it froze again! So I immediatly called HTC Netherlands and again, the P3300 was picked up by UPS that afternoon. The second time I wrote a letter to the repair station and sent it with my phone. In another topic on another website I read that some other phone with the same problem had been fixed by replacing the motherboard. I got my phone back today and it works great! It hasn't crashed today, and I have confidence it won't in the future. So my tip to you and anyone who experiences this problem: Call the HTC helpdesk in your country and ask them to sent your PDA to a repair station. It might take a while but they fix it well! By the way, you have 2 years full garantee so it didn't cost me anything! Great service from HTC!
Had the same problem.
Power was on, then de screen went black and stayed black even after pushing the right upper side button. Had about 4.90mb free storage memory on the phone and 200mb on my card left.
Soft reset didn't work but a hard reset did!
I have the same problem for the last week
I tried to change Roms to original and back to manila, the same problem.
the artemis freeze suddenly without ant reason. after calls, before calls..
it's not wake up and it's show a blank screen. after few soft reset and battery replacement is wake up and work fine till the next time.
for now , I'm work with doppod original rom wm5 but no WIFI.
I think it started last week when I installs "B&B 5.0 love" rom, before that It work fine with pdviet manila2D.
problem upgrade my rom
I'm now have a O2 UK roms on my device.
I try update it to Touch 4.02, with the UPSL but it no working.
the bar with percents jump from 0% to 100% in sec. and I still having the same rom.
I read the uspl guide.
can yo uhelp me ?
during a rom upgrade some time back, my screen started to fade, at first very very dark etc, the just black.
I could not connect diamond to pc (never even came up as a usb device) it was dead!!
The phone was hard spl'd and had been through 20 or so roms without issues...
I have managed to re hard spl it,, put radio back to 25, and put an old simple duty rom...
it now active syncs, receives calls, etc
but screen is black????
any clues besides ebay??
Does the screen turn on at all when you Hard SLPed it?
NO, no lights on Unit anywhere
Not even below on the Phone or Home buttons etc, the unit has 0 lighting power at all times (after hard reset, after hard spl etc) , but it active syncs etc. and makes sounds??
Is it software or hardware? Strange thing is this happened after a rome upgrade, which makes me think software, but I have upgraded, re hard spl-d numerous times to know affect.
So if hardware, I can see new sreens on ebay for 20GBP delivered, and I was thinking of ordering them if they are not too hard to install?
Any input appreciated
it appears after a rom flash, now the screen seems to be actually light in black for awhile, so slowly patient is being revived but I still do not know how to get it back...
UPDATE: Screen came back but on low power (ie no backlight) and it is now stuck installing opera??: bug Microp Mismatch during installation. We are slowly getting there
ok - if it's software, the best way is mtty - as far as i can tell, it'll make sure everything is wiped out...
but from the sound of it... u said it went down while upgrading - so i might not be the software, coz while upgrading (%ages shown) software is being "written" - but it's not really "active"...
but worth a try:
http://forum.xda-developers.com/showthread.php?t=540290
good luck
Updates: Lights on Bottom coming on
I am having a difficult time getting MTTY to work, but the device white lights on the lower end of the screen turn on now. (when I seem to reset the device etc)
I can update the rom to other roms without problems, is there a reason to use mtty to update or should I just order a new screen?
UPDATE: Energy Rom works! but screen is very dim, no brightness, and I get this infamous Microp error???
looks i'm still screwed this is a hardware error...screen went black again...
My XDA Orbit went crazy today, first I couldn't start him at all, he wasn't react on "power button". After few attemts he finally started. I connected him to PC but he turned off after couple minutes. From this moment I can't start windows, it stops at starting screen (with IPL, SPL, GSM, OS). After a while screen starting to quakes (like a low frequency on CRT). I tried hard reset, it won't help and run it in bootloader mode but Orbit just reset.
Additonal info:
IPL 3.04.0001
SPL 3.04.0000
GSM 02.67.90
OS 3.4.0.0
ROM: Original WM6 from O2
Can anyone help me?
Have you tried a different barttery?
No, I didn't. I don't know anybody with artemis to borow another battery.
EDIT: I checked battery voltage, it's about 3,85V and now i noticed something, on battery sticker is printed it is for ARTE160 3.7VDC-1200mAh but on the phone it's printed ARTE200 5VDV-1A. Is that can cause the problem?
Finally I forced it to run in bootloader mode and flashed with the same O2 WM6 ROM. He started and I was abble to flash USPL and other ROM. It's better but still sometimes phone just poweroff with no reason
flisak said:
Finally I forced it to run in bootloader mode and flashed with the same O2 WM6 ROM. He started and I was abble to flash USPL and other ROM. It's better but still sometimes phone just poweroff with no reason
Click to expand...
Click to collapse
Hi
Had a similar problem!!! Try reflashing the rom....It worked for me..I used the o2 stock rom found on the the artemis wiki in the ftp section.... Can also highly recommend the Touch rom found in the windows mobile 6 section of the artemis section here..
regards
Lohtse
I bought a new battery but phone still turning off and freezes. Now I can't even turn it on, sometimes it starts but screen slowly fades away and after few seconds its only black screen with black light. It's propably a hardware problem but what?
EDIT: I started it, working fine when it's connected with pc but when I disconnect it freezes after couple of minutes.
flisak
open the device and check the screen is connected propperly, piss easy, just be very carefull.
if this does not work buy a new LCD.
Hi, I have the same problem with my Artemis, did anyone find a solution? Can be a problem with the LCD?
And plus one here. The device always turn off, and is difficult to turn on again. Rplaced battery and is the same.....
I've got an XDA Orbit that periodically hangs (full black screen and occasionally this seems to drain the battery very quickly). I've taken it apart and reseated the connectors and these all look ok.
Seems to happen when you're taking it out of a pocket to answer a call etc. Sometime it just requires a soft-reset but occasionally it just doesn't respond. In these instances I have found that twisting it slightly across the diagonal (top left to bottom right bending back slightly) and then resetting the device seems to bring it back to life and it's ok for a few hour/days again. If I leave it alone, i.e. not in my jeans pocket - it's fine, so think it's hardware related but not sure which bit is faulty - screen, touch-screen, mainboard etc.
If I bend it the same as above when it's working the screen goes screwy and causes it to crash so think it's definitely this is what's causing the device to crash. However, the clock seems to keep going (I'm assuming so as in most incidents it doesn't seem to lose the correct time - although I might just be seeing the problem the instant after it has crashed) so don't know whether the mainboard is still ok.
Just thought it might help some if you try the slight twisting described above to see if that helps with these to get them working and if anyone has any ideas how I can work out which bit of mine is faulty I'd be grateful.
when I try to flash the ROM 6.5 for my HP3300 after 4% flashing it restrats again. Pls help me out. I think this problem might be with my Ext_ROM. How to unlok EXT_ ROM
what is the best touch rom to use for my xda orbit. and where can i get it
lohtse said:
Hi
Had a similar problem!!! Try reflashing the rom....It worked for me..I used the o2 stock rom found on the the artemis wiki in the ftp section.... Can also highly recommend the Touch rom found in the windows mobile 6 section of the artemis section here..
regards
Lohtse
Click to expand...
Click to collapse
what is the best touch rom to use for my xda orbit. and where can i get it
Well it seems that I'm having similar issues with my Orbit.
I've been having problems with it for a few weeks and they seem to be getting much worse now.
Occasionally it would just lock up and freeze, but after frantic tapping it will unfreeze itself and continue working fine. But over the past few days it's been locking up regulary. Removing the battery was the only way to get it going again.
But now it just won't do anytihing. As soon as I start it up I either get a white screen (it phases in during the splash screen), or it'll start up, freezes after a few seconds, then eventually switches itself off. Hard resetting it makes no difference at all. Changing the battery didn't work either. I always keep it on charge overnight, could that be the problem? Maybe I'm just overcharging the battery (if that's even possible).
Note: As I've typed this, I've switched it on again only to find the battery's flat, even though it's been off for most of the day (I gave up trying to start it up). The battery usually lasts for the whole day - maybe even 2 days if I don't use it much. I had it on charge overnight as I said.
I'll try another battery to see if that works. If not then what can I do?