Problem when I update the Asus P505. Please help me.. - Upgrading, Modifying and Unlocking

I want change the Vodafone ROM to Asus generic Rom, in my Asus P505.
I update the radio version (V.4.3.0.), but, when I put the Bootcode into my SD card, and reboot the system, in the screen, I see:
-BOOT505.NB0
-BOOT505.NBO
and repeat this...
What do I do?
Jorge

if you press:
camera button + rec button + vc button and reset you update the boot code
(few seconds)
if you press:
camera button + vc button you update the rom
(about 5minutes)

Thanks :wink:

Related

ASUS P750 - How to flash cooked rom

HI there,
I got my P750 and want to flash it to WM6.1, unfortunately I read all posts and unable to find a way to drive it to wrok ????
I just copy the rom file in the 1G MicroSD card (root dir) and connect the USB for charging, press "voice+joystick+power -> press up" it go to the update program page with only msg is: USB cable is detected and waiting ....
Do you need upgrade rom tools for P750? Right?
hello,
pls search the forum..there is WWE ROM 6.1 from Sorg and pdaviet
Hmmm. I found out the problem...
Press the Record Button and the Joystick (downwards - it is prush towards downwards and not just prush in ) and the Power/Hold Slider upwards and hold these three in Position and then press the Reset Button to start the Flash

ASUS P750 - VGA ROM available!!!

Well, we (Sorg and GreateVK) finished VGA ROM for ASUS P750.
Primary thread (on Russian)
http://asusmobile.ru/board/viewtopic.php?p=126563#126563
with Google translator:
http://translate.google.com/transla...?p=126563#126563&langpair=ru|en&hl=ru&ie=UTF8
Heya! Thanks for the work on the VGA rom! I tried to load it into my P750, unfortunately I'm getting the following error message:
Boot : Checksum error!
Update fail!
Not sure what's up with this but I was able to install your WM 6.1 rom perfectly. Anyone else having the same trouble?
Use original USB-cable. From MicroSD it's impossible to load VGA into P750
Oh, so I can just copy the nb0 file into the main phone memory? Is there a specific directory I need to copy the file to?
I've been installing roms via microsd card in the past, didn't know I can't do the same with the VGA rom.
Voice command botton does not active P750
Hi Sorg, GreateVK,
Last time before update cook rom v0.09, I can use voice command botton press force mode. Now it does not work. Other way auto run cab fr sdcard does not also. Do we have other way to downgrade or clear it. pls advice.
Thx, F
You flash it as all other cooked roms from the SD-card and force bootloader.
The v1.02 has a big time issue with memory leak, starts with 25 MB, but at the end of the day under 10 MB without any programs running...
Does this rom have a vga wireless manager?
I'm trying to find one to port to the E-ten x800 as the wireless manager from E-ten is pretty bad.
NO its the same one from WM6.0 but it is okay
Joost39 said:
You flash it as all other cooked roms from the SD-card and force bootloader.
Click to expand...
Click to collapse
Is there a topic where this is explained ? Would like to try VGA Rom but need to backup existing ROM first !
Hi Joost,
Thx for your advice,
--------------------
You flash it as all other cooked roms from the SD-card and force bootloader.
Is there a topic where this is explained ? Would like to try VGA Rom but need to backup existing ROM first
------------------------
1. How to flash fr sdcard? which rom version nbo, cab? where i can load?
2. I'm quite sure force bootloader cannot do it, Coz voice command does not active (voice command + slide power upward + joystick downward + reset)
3. VGA rom is nbo or cab file, the way to do as item 1 or not.
Pls advice,
Thx, F
Is this rom in english or russian language? can u please post how to flash the new rom in or a link to instructions please ? tnx
daraj said:
Is this rom in english or russian language? can u please post how to flash the new rom in or a link to instructions please ? tnx
Click to expand...
Click to collapse
Yes, it's in english!
Just copy the ROM file on the root of your sd card, plug the usb power (cable or power adapter) then hold the voice command button + hold power button upward + hold joystick downward + reset with the stylus
A bit difficult but not impossible
Thanks, do you know of a way to back up the existing ROM first to go back to it ?
GpsPasSion said:
Thanks, do you know of a way to back up the existing ROM first to go back to it ?
Click to expand...
Click to collapse
Very good question.
Ftogether said:
Thx for your advice,
--------------------
You flash it as all other cooked roms from the SD-card and force bootloader.
Is there a topic where this is explained ? Would like to try VGA Rom but need to backup existing ROM first
------------------------
1. How to flash fr sdcard? which rom version nbo, cab? where i can load?
2. I'm quite sure force bootloader cannot do it, Coz voice command does not active (voice command + slide power upward + joystick downward + reset)
3. VGA rom is nbo or cab file, the way to do as item 1 or not.
Pls advice,
Thx, F
Click to expand...
Click to collapse
Flash from the SD-card:
Org. roms: cap-file
Boot Loader Force Flash:
Plug into Charger (or Computer), Press the Record Button in and the Joystick UP and the Power/Hold Slider upwards and hold these three in Position and then press the Reset Button to start the Flash
Modded roms: nb0-file
Boot Loader Force Flash:
Plug into Charger (or Computer), Press the Record Button in and the Joystick down and the Power/Hold Slider upwards and hold these three in Position and then press the Reset Button to start the Flash
To backup your own rom you need to dump the rom- difficult:
But all the original roms are on the ASUS site!
ftp://ftp.asus.com/pub/ASUS/Mobile_Phone/P750/
Just download the correct one and reflash the phone.
mentox said:
Yes, it's in english!
Just copy the ROM file on the root of your sd card, plug the usb power (cable or power adapter) then hold the voice command button + hold power button upward + hold joystick downward + reset with the stylus
A bit difficult but not impossible
Click to expand...
Click to collapse
Now, here is how you do it
You start with p750 horizontally before you, the screen to the left, numpad to the left.
1. take the stylus into your mouth, locate the reset hole and slip it into it (do not push it yet).
2. left hand: hold the joystick down.
3. right hand: press voice record button and with the thumb slide the power button.
4. immediatelly push the stylus with your tongue and hold the whole combination for a second or two.
Joost: which one is the right one on ASUS ftp? I mean the qvga, English.
Take the Singapore one WWE SG !!
Anyone seen the French ROM on their FTP ?
Hi Joost,
Thx for yr time, finally my H/W voice command does not active. Now change MB can do everything. So far i test vga rom v.1.0 it's pretty display, memory too low, CPU slow down.
thx, F
Do the VGA Rom's available put the phone in VGA mode permanently or do you have the option to switch between VGA and QVGA?

Bootloader on ASUS P535

Hi
please help me!
How can i get bootloader mode without reset button on Asus P535?
Reset button is broken?!?!?!
please help!
tnx
Doing the same when you press Power button to switch on should also do the trick.
hmmm, Try press and hold the button and remove the battery then re-insert back the battery??
i try....dont work!
power button + ???? please tell me!
or...how to convert nb0 files to cap files?
tnx
Hello,
To reset your Asus P525, do this :
1) turn it off
2) Push the button at the top (you have the square button, you push at the top of the button
3) without releasing the button, turn it on
Regards, Denis.
Asus P535 - REC button broken!! How to Bootloader???
Asus P535 REC button broken!! How to Bootloader???? Pleasssseeeeee!!!!!
Att.
Leo
Help! will not start I did not expect to update BootGalaxy.NB0 along and now will not start checksum ok! Update Fail! and all the ROM, although it about 1-2 h during the run out and only brought into the bootloader such as galaxy flashrom update but it does not look like something is missing from me a long time just not what tom. Raduga is much darker and, if the USB is removed from the red label. Just print it: Please plug AC / USB Cable! please help
Hi everyone, I am a new member just joined the community
to share my knowledge with others.

Asus P750 - upgrade to VGA - How stable??

I saw the thread on this forum about the VGA ROM for the P750...
Unfortunately I am not an expert at all and perhaps maybe not the right place here for me to ask but here it goes,
Can I easily install and remove the ROM in case the the VGA patch starts bugging? and how do you install the ROM, is there are step by step manual floating around?
any feedback greatly appreciated!
bras
Hi, I did install the VGA ROM vers. 1.02 by Sorg & GreatVK and also tried the 0.17 by Sorg.
I didn't link the dual-mode keyboard (RUS-US) of the 0.17 and I think it has a higher memmory comsumition. So, I prefered the 1.02.
The 1.02 is stable, and the only problem I noticed is about the Live Messenger that do not works. The VGA screen is realy better!!!
If you do not like, you can install other dumped ROM or one of those you can find at asus website.
To install de Dumped: put the .nb0 file on a microSD (not HC) and press voice memo + down + power + reset.
To install de Shipped: put the .cap file on a microSD (not HC) and press voice memo + up + power + reset.
Here both methods works finte.
:hth:
[ ]'s
Bruno Leony
ok thanks alot
with dumped you mean the Sorg & greatVK rom and with shipped you mean the original Asus Rom?
you don t need to back up the original Asus ROM?
bras4real said:
with dumped you mean the Sorg & greatVK rom and with shipped you mean the original Asus Rom?
Click to expand...
Click to collapse
Yes
bras4real said:
you don t need to back up the original Asus ROM?
Click to expand...
Click to collapse
Depends, if your ROM is avaiable at Asus site you dont. Mine was WWE UK, there has just WWE SG, TH and MS at asus site. I restored my to SG with no broblems, just did the forced mode 1st and after coud do the normal one.
Wich ROM is currenty on your device (settings/ system / system information / version)?
I am running the VGA 0.17 Base and am very happy with it, only the Keybaord Thing drives me crazy and CoolCamera is a bit crappy......... But once you have seen the VGA, believe me you dont want to go back to QVGA. Also WM6.1 more stable in my Opinion than WM6.0 and few nice Things like a real Taskmanager......... attached a screenshot !!
I am using ROM version 4.8.4 NLD_NL00? is that for the Netherlands?
To install de Dumped: put the .nb0 file on a microSD (not HC) and press voice memo + down + power + reset........................
how hard can this be?
I installed 1.02 by Sorg & GreatVK file but when I (try) to press all 4 buttons above a screen comes up saying
Flashrom Update.....
IPL: iplPegP_4H3
but nothing really happens
what s going wrong? how u press all these buttons together?
Right Hand on Voice Button and Slider, left hand on J/Stick Press Reset w Stylus using your mouth....... Remember when flashing from SD Card only plug-in Cable after this...
Also for Cap File J/stick up and for nbo File J/stick up.....
sorry for this long message but I need to get this device running VGA along with another 3 collagues who will be operating the same device
to flash ROM/install the VGA patch ::
On the Asus mobile club it is explained as:
The way the first - with MicroSD card
1)take (preferably clean, just formatted) MicroSD card no more than 2GB (MiniSDHC PODOYDET NOT!) And copy it, the root, file PegasusP.nb0
2) present the card into the phone, the phone or connect to a computer or to power supply.
3)joystick down and slide the button to switch off the top Hold these buttons in a position to release and push briefly reset (now come in such rastopyrku ASUS!).We continue to hold the button until butbloka server It shall commence proceedings firmware
ok so installing the root folder which is thiS? My MicroSD folder is completely empty and how do I know it s not HC?
for the record, the joystick button needs to pressed down or up? manual above says down, you say up!
thanks for yr help
it seems to work now to some extent
in the boot menu it says ' PEGASUS NBO not found'
I checked in mobile explorer, the file is sitting there..
coulld it not work because my p750 is running on a Dutch ROM??? (the WM language is Dutch witch is not changeable it seems)
Copy The File PegasuP.nb0 to the just formatted Card, remember you must format FAT16 !! and then it should find it.......
Oh the the Card will say HC on it if it is !! To flash to another Asus OEM Rom (like WWE English) put the AsusP750.cap File on the Card and do the same Procedure only push the Joystick UP, then it will ask to be plugged into either USB or Charger Cable, after you do this the Boot will start. Then extract the the whole OEM Firmware onto the Card and upgrade again.
Alternate ways to load "PegasusP.nb0" ROMS
Hi all, just want to post something I found on this particular forum. Would help in loading of "PegasusP.nb0"
3 different ways to load the ROMs.
http://asusmobile.net/board/viewtopic.php?t=83
The USBLoader file can be found here
http://www.mediafire.com/?fa9a9vp2knb
Var.1 – Using MicroSD
1. Format your MicroSD card (max. capacity 2 Gb! NOT SDHC) and copy PegasusP.nb0 on it
2. Plug in you MicroSD card into smartphone and connect in to PC or plug in power adapter
3. Press and hold VoiceCommander button + joystick down + PowerButton up and press Reset once but keep on holding the buttons untill you see bootloader screen. Then it starts uploading new firmware
4. Smartphone will reboot and that`s it!
Var.2 for XP users!
1) Go to ActiveSync settings and check out (disable) USB cable connection
2) Perss and hold VioceCommander button + Power button up. Press Reset once but keep on holding the buttons untill you see bootloader screen.
3) Smatphone will turn on the bootloader mode throu USB
4) Connect P750 to PC and wait till PC will install drivers
5) start using command line: USBLoader.exe PegasusP.nb0
6) You can see the updating process both on PC and PDA
7) After it is done press Reset
Var.2 for Vista users!
1) 1. Perss and hold VioceCommander button + Power button up. Press Reset once but keep on holding the buttons untill you see bootloader screen.
2) Smatphone will turn on the bootloader mode throu USB
3) Go to Devices Explorer and find your PDA in: Mobile Devices -> Asus USB Sync. Unstall SPECIFIC driver with you can find in downloaded archive in USBAS folder. Make sure that you install THIS PARTICULAR driver
4) start using command line: USBLoader.exe PegasusP.nb0
5) You can see the updating process both on PC and PDA
6) After it is done press Reset
Click to expand...
Click to collapse
Hi All,
Will the above describe procedure force-load a ROM that is from a different region than the original ROM? There are some new 6.1 WWE ROMs on the ASUS website, but I can't get them to load since my phone is not from any of the regions available.
Has anyone tried the new ROMs? Any recommendations?
Dan
Dan.S said:
Hi All,
Will the above describe procedure force-load a ROM that is from a different region than the original ROM? There are some new 6.1 WWE ROMs on the ASUS website, but I can't get them to load since my phone is not from any of the regions available.
Has anyone tried the new ROMs? Any recommendations?
Dan
Click to expand...
Click to collapse
Yes it will force it to flash whatever region your device is from. As always use at your own risk.
P750
Hi All,anyone know how to disable the message instance reply after upgrade to wm 6.2 and also is there any smartdial with this ASUS p750 3g ppc.thanks
asus p 750 update error
hi guy's my asus p750 won't update just come at the update screen-sd download and standing they wont 2 finish pls help
thanks.....

[q] big question

i yestrday updated may HTC DIAMOND with this
(_HTC Touch Diamond_MRII_RUU_Diamond_HTC_SVE_2.03.413.2_Radio_ Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe)..
but it still on swedish,can i download (RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.0 8_0.93.25_Ship.exe)
OR
[ROM][WWE/RO][01.OCT.09]Akeo_WM_6.1_WWE_Premium_Edition_V 2.0/RO_Standard_Edition V1
and updated again or not? im confused..im scared if phone crash if i updated now..can anybody help mi with answer
the ups can not succeed.
try again another great rom.
ROM can not up the shiprom the machine up normally if no genuine
Flash ROM guide HTC Diamond Direct ( shiprom)
This uprom compact way, no need to up the ROM machine is hence to minimize the errors arising from failure to connect
In this way, just up Radio ROM and takes up less than 4 minutes. Great speed.
When the follow up process follows:
1 / Select a file from the ROM NBH tail .. downloaded and renamed DIAMIMG.nbh
2 / Copy the file: DIAMIMG.nbh drop to the Internal Storage
3 / Soft Reset Button + Hold down the volume button and <---- back
4 / How to instructions on the screen press the power button to continue the process uprom
When will finish up the words you wait a little press ok then press the reset button or press volumdown + + softreset enterbutton to hadreset machine.

Categories

Resources