[q] big question - Touch Diamond, MDA Compact IV ROM Development

i yestrday updated may HTC DIAMOND with this
(_HTC Touch Diamond_MRII_RUU_Diamond_HTC_SVE_2.03.413.2_Radio_ Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe)..
but it still on swedish,can i download (RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.0 8_0.93.25_Ship.exe)
OR
[ROM][WWE/RO][01.OCT.09]Akeo_WM_6.1_WWE_Premium_Edition_V 2.0/RO_Standard_Edition V1
and updated again or not? im confused..im scared if phone crash if i updated now..can anybody help mi with answer

the ups can not succeed.
try again another great rom.
ROM can not up the shiprom the machine up normally if no genuine
Flash ROM guide HTC Diamond Direct ( shiprom)
This uprom compact way, no need to up the ROM machine is hence to minimize the errors arising from failure to connect
In this way, just up Radio ROM and takes up less than 4 minutes. Great speed.
When the follow up process follows:
1 / Select a file from the ROM NBH tail .. downloaded and renamed DIAMIMG.nbh
2 / Copy the file: DIAMIMG.nbh drop to the Internal Storage
3 / Soft Reset Button + Hold down the volume button and <---- back
4 / How to instructions on the screen press the power button to continue the process uprom
When will finish up the words you wait a little press ok then press the reset button or press volumdown + + softreset enterbutton to hadreset machine.

Related

None of these awesome custom ROMs does work for me

Hey all,
ive read here now several days about updating your universal etc.
Im now quit a bit in the stuff and i wanted to upgrad my Qtek 9000 with some of these nice FWs here.
I tried Indras, helmis and another one but all dont want to start the Update.
I own an original Qtek 9000 without ANY branding, i used an official update which worked flawless 100% good!
Now any FW i choose here, gives me "Country Error" and YES i replaced the files from the directory but didnt help at all Also searched this forum alot but nothing could help me.
Also my IMEI isnt accepted at qteks website....
Any1 an idea? Do i need a special update?
Sorry for beeing dumb, but im just trying to get into this material
Greetings
--Edit--
I somehow killed my ROM and just did a hardreset and reinstalled the official upadte. worked great but still no update of these nice custom roms here
By replacing files, do you mean you used MaUpgradeUt_noID.exe to upgrade?
And before you use MaUpgradeUt_noID.exe, did you put your device into bootloader mode?
CWKJ said:
By replacing files, do you mean you used MaUpgradeUt_noID.exe to upgrade?
And before you use MaUpgradeUt_noID.exe, did you put your device into bootloader mode?
Click to expand...
Click to collapse
hello CWKJ
can u please explain how to place the device in boot loader ?
and this bootloder must be done before the rom upgrade ???
I too keep getting a country error 120
Iv replaced with the Maupgrade utility...
I am not a genies guys like mamiach and others but following procedure I do for upgrading my Universal.
>1.0 Down load your preferred ROM version and extract it on your computer. Inside extracted file you will see among others the ROM file “nk.nbf”
>1.1 Download the file: Country_ID_Error.zip and extract it to folder “Country_ID_Error”
>1.2 Copy the “nk.nbf” file from the ROM folder in to folder Country_ID_Error folder.
>1.3 Set your device in Boot loader mode with pushing button combinations “Backlight button” + “power button” + and with your styles the “reset button”
>1.3.1 Now you will observe on your device boot loader screen which is in fact almost dark screen .
>1.4 Now Connect your device to your computer
>1.5 start the installation with the file “MaUpgradeUt_noID. exe ” which is in the folder “Country_ID_Error”
>1.6 After the ROM installation is completed, hard reset your Device with button combination: power button + 1st soft key control button + 2nd soft key control button (soft key buttons are the2 xbuttons on your device keyboard with the sign of “ –“ on it)
>1.6.1 Now on your device screen you will observe the message push the button “0” for factory settings which you will follow and complete the actual hard reset.
Well you are completed the ROM upgrade and it should be everything fine. :0)
Bulldog said:
I am not a genies guys like mamiach and others but following procedure I do for upgrading my Universal.
>1.0 Down load your preferred ROM version and extract it on your computer. Inside extracted file you will see among others the ROM file “nk.nbf”
>1.1 Download the file: Country_ID_Error.zip and extract it to folder “Country_ID_Error”
>1.2 Copy the “nk.nbf” file from the ROM folder in to folder Country_ID_Error folder.
>1.3 Set your device in Boot loader mode with pushing button combinations “Backlight button” + “power button” + and with your styles the “reset button”
>1.3.1 Now you will observe on your device boot loader screen which is in fact almost dark screen .
>1.4 Now Connect your device to your computer
>1.5 start the installation with the file “MaUpgradeUt_noID. exe ” which is in the folder “Country_ID_Error”
>1.6 After the ROM installation is completed, hard reset your Device with button combination: power button + 1st soft key control button + 2nd soft key control button (soft key buttons are the2 xbuttons on your device keyboard with the sign of “ –“ on it)
>1.6.1 Now on your device screen you will observe the message push the button “0” for factory settings which you will follow and complete the actual hard reset.
Well you are completed the ROM upgrade and it should be everything fine. :0)
Click to expand...
Click to collapse
Sorry for my mistake for the paragraph 1.6 please ignore the previos 1.6 and follow the below
>1.6 After the ROM installation is completed, hard reset your Device with button combination:
1st soft key control button + 2nd soft key control button + and with you styles the reset button (soft key buttons are the2 x buttons on your device keyboard with the sign of “ –“ on it)
Looks like Bulldog has beaten me to the answer.
Copy nk.nbf to Country_ID_Error directory of copy MaUpgradeUt_noID.exe to the nk.nbf directory is the same.
thanks Bulldog
its been of great help
i figured out what the problem was.
I somehow had to flash back to an orignal rom and then only the roms here did work...
Thx for your help guys
problem entring bootloader
is there any way to flash the rom through memory card un able to enter the boot loader please help i have got struck at o2 screen

Asus P750 - upgrade to VGA - How stable??

I saw the thread on this forum about the VGA ROM for the P750...
Unfortunately I am not an expert at all and perhaps maybe not the right place here for me to ask but here it goes,
Can I easily install and remove the ROM in case the the VGA patch starts bugging? and how do you install the ROM, is there are step by step manual floating around?
any feedback greatly appreciated!
bras
Hi, I did install the VGA ROM vers. 1.02 by Sorg & GreatVK and also tried the 0.17 by Sorg.
I didn't link the dual-mode keyboard (RUS-US) of the 0.17 and I think it has a higher memmory comsumition. So, I prefered the 1.02.
The 1.02 is stable, and the only problem I noticed is about the Live Messenger that do not works. The VGA screen is realy better!!!
If you do not like, you can install other dumped ROM or one of those you can find at asus website.
To install de Dumped: put the .nb0 file on a microSD (not HC) and press voice memo + down + power + reset.
To install de Shipped: put the .cap file on a microSD (not HC) and press voice memo + up + power + reset.
Here both methods works finte.
:hth:
[ ]'s
Bruno Leony
ok thanks alot
with dumped you mean the Sorg & greatVK rom and with shipped you mean the original Asus Rom?
you don t need to back up the original Asus ROM?
bras4real said:
with dumped you mean the Sorg & greatVK rom and with shipped you mean the original Asus Rom?
Click to expand...
Click to collapse
Yes
bras4real said:
you don t need to back up the original Asus ROM?
Click to expand...
Click to collapse
Depends, if your ROM is avaiable at Asus site you dont. Mine was WWE UK, there has just WWE SG, TH and MS at asus site. I restored my to SG with no broblems, just did the forced mode 1st and after coud do the normal one.
Wich ROM is currenty on your device (settings/ system / system information / version)?
I am running the VGA 0.17 Base and am very happy with it, only the Keybaord Thing drives me crazy and CoolCamera is a bit crappy......... But once you have seen the VGA, believe me you dont want to go back to QVGA. Also WM6.1 more stable in my Opinion than WM6.0 and few nice Things like a real Taskmanager......... attached a screenshot !!
I am using ROM version 4.8.4 NLD_NL00? is that for the Netherlands?
To install de Dumped: put the .nb0 file on a microSD (not HC) and press voice memo + down + power + reset........................
how hard can this be?
I installed 1.02 by Sorg & GreatVK file but when I (try) to press all 4 buttons above a screen comes up saying
Flashrom Update.....
IPL: iplPegP_4H3
but nothing really happens
what s going wrong? how u press all these buttons together?
Right Hand on Voice Button and Slider, left hand on J/Stick Press Reset w Stylus using your mouth....... Remember when flashing from SD Card only plug-in Cable after this...
Also for Cap File J/stick up and for nbo File J/stick up.....
sorry for this long message but I need to get this device running VGA along with another 3 collagues who will be operating the same device
to flash ROM/install the VGA patch ::
On the Asus mobile club it is explained as:
The way the first - with MicroSD card
1)take (preferably clean, just formatted) MicroSD card no more than 2GB (MiniSDHC PODOYDET NOT!) And copy it, the root, file PegasusP.nb0
2) present the card into the phone, the phone or connect to a computer or to power supply.
3)joystick down and slide the button to switch off the top Hold these buttons in a position to release and push briefly reset (now come in such rastopyrku ASUS!).We continue to hold the button until butbloka server It shall commence proceedings firmware
ok so installing the root folder which is thiS? My MicroSD folder is completely empty and how do I know it s not HC?
for the record, the joystick button needs to pressed down or up? manual above says down, you say up!
thanks for yr help
it seems to work now to some extent
in the boot menu it says ' PEGASUS NBO not found'
I checked in mobile explorer, the file is sitting there..
coulld it not work because my p750 is running on a Dutch ROM??? (the WM language is Dutch witch is not changeable it seems)
Copy The File PegasuP.nb0 to the just formatted Card, remember you must format FAT16 !! and then it should find it.......
Oh the the Card will say HC on it if it is !! To flash to another Asus OEM Rom (like WWE English) put the AsusP750.cap File on the Card and do the same Procedure only push the Joystick UP, then it will ask to be plugged into either USB or Charger Cable, after you do this the Boot will start. Then extract the the whole OEM Firmware onto the Card and upgrade again.
Alternate ways to load "PegasusP.nb0" ROMS
Hi all, just want to post something I found on this particular forum. Would help in loading of "PegasusP.nb0"
3 different ways to load the ROMs.
http://asusmobile.net/board/viewtopic.php?t=83
The USBLoader file can be found here
http://www.mediafire.com/?fa9a9vp2knb
Var.1 – Using MicroSD
1. Format your MicroSD card (max. capacity 2 Gb! NOT SDHC) and copy PegasusP.nb0 on it
2. Plug in you MicroSD card into smartphone and connect in to PC or plug in power adapter
3. Press and hold VoiceCommander button + joystick down + PowerButton up and press Reset once but keep on holding the buttons untill you see bootloader screen. Then it starts uploading new firmware
4. Smartphone will reboot and that`s it!
Var.2 for XP users!
1) Go to ActiveSync settings and check out (disable) USB cable connection
2) Perss and hold VioceCommander button + Power button up. Press Reset once but keep on holding the buttons untill you see bootloader screen.
3) Smatphone will turn on the bootloader mode throu USB
4) Connect P750 to PC and wait till PC will install drivers
5) start using command line: USBLoader.exe PegasusP.nb0
6) You can see the updating process both on PC and PDA
7) After it is done press Reset
Var.2 for Vista users!
1) 1. Perss and hold VioceCommander button + Power button up. Press Reset once but keep on holding the buttons untill you see bootloader screen.
2) Smatphone will turn on the bootloader mode throu USB
3) Go to Devices Explorer and find your PDA in: Mobile Devices -> Asus USB Sync. Unstall SPECIFIC driver with you can find in downloaded archive in USBAS folder. Make sure that you install THIS PARTICULAR driver
4) start using command line: USBLoader.exe PegasusP.nb0
5) You can see the updating process both on PC and PDA
6) After it is done press Reset
Click to expand...
Click to collapse
Hi All,
Will the above describe procedure force-load a ROM that is from a different region than the original ROM? There are some new 6.1 WWE ROMs on the ASUS website, but I can't get them to load since my phone is not from any of the regions available.
Has anyone tried the new ROMs? Any recommendations?
Dan
Dan.S said:
Hi All,
Will the above describe procedure force-load a ROM that is from a different region than the original ROM? There are some new 6.1 WWE ROMs on the ASUS website, but I can't get them to load since my phone is not from any of the regions available.
Has anyone tried the new ROMs? Any recommendations?
Dan
Click to expand...
Click to collapse
Yes it will force it to flash whatever region your device is from. As always use at your own risk.
P750
Hi All,anyone know how to disable the message instance reply after upgrade to wm 6.2 and also is there any smartdial with this ASUS p750 3g ppc.thanks
asus p 750 update error
hi guy's my asus p750 won't update just come at the update screen-sd download and standing they wont 2 finish pls help
thanks.....

Flashing HTC DIAMOND Rom

Would this modified procedure(shown in the Diamond service manual) work for any rom image and without any Hardspl program.
FLASHING ROM’S :
Copy image file XXX.nbh to the ‘INTERNAL MEMORY' and rename to DIAMIMG.NBH
Press and hold Volume down+ Right button, and press Power button to entry Boot loader mode.
Press Power button to start upgrade procedure.
Reading source code from INTERNAL MEMORY. [Note]: This process will takes 10 minutes, please don’t power off the device.
After finish, press Reset button to reboot.
just read the sticky threads. do _NOT_ flash without hardspl on your phone, its bad.
http://forum.xda-developers.com/showthread.php?t=416211
Here it is.. enjoy.
Thx your responce.
I did know the procedure with hardspl.
I was looking to see if anybody has tried the procedure described in the diamond service manual with non-official rom's.
I have tried with the offical rom image from Htc, and it worked out perfectly.
If anybody has tried with non official rom's, please let me know, as this would make it easier to flash our diamond.
worked fine on the rom i use
check my sig for details

how to update my ROM ?

i am with 1.93 rom and i want to update to 2.03 but it stops at 0%
KingMathers said:
i am with 1.93 rom and i want to update to 2.03 but it stops at 0%
Click to expand...
Click to collapse
Please Please!
Look in the damn sticky's they are there for a reason!
EX:
Sticky: Poll: [TUT]Complete upgrading guide (HardSPL+Radio+ROM) NOT FOR CDMA USERS!!! ( 1 2 3 ... Last Page)
Sticky: [UPG][TRBL]How-to fix: Update/Flash doesnt work, stops at 0% or 5% (invalid model ID) ( 1 2 3 ... Last Page)
GDI..
Before you look at the above post, consider flashing your ROM using the internal method.
I must have said this over 10 times in the last 30 at least.
Internal Method: (From Suiller)
COOKING ROMs & Radios from phone =-
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
welcome to the forum
please always look before you ask
the search button is your best friend in the forum.

Help htc touch diamondtive sicron.

Hay i have htc touch diamond how to uptade wm 6.1 to 6.5 ? I try to connect wia active sicron. But cannot uptade
[link 1], [link 2]
Link 1 is the same thing with link 2.
Tanks on fasst answer i got 4 colors screen , red ,yelow , blue ,white on top writte diam100 64m spl-1.37 i pressing power button nothing happening ,help . I new one here
Connect your diamond to PC as a disk drive (mass storage) and copy your ROM to Internal Storage. Make sure it`s name is "DIAMIMG.nbh" (*.nbh is the extension, make sure it is only once, not like this: "DIAMIMG.nbh.nbh" ) and than hit the reset button and hold vol down + back key. After update make a hard reset, hit the reset button and hold vol down + center key and follow the instructions on the screen (vol up to format only phone memory).
I hope you understood.
Good luck!
This part is ok now writte "trigger usb host " noting happend but i clean f disk ( memory internay ) only left image file how to run update ?
So... put "DIAMIMG.nbh" into Internal Storage (root). Unplug you diamond from PC, hit the reset button, and hold vol down + back key, press power key, wait for update to complete.
thecrazyman64 said:
So... put "DIAMIMG.nbh" into Internal Storage (root). Unplug you diamond from PC, hit the reset button, and hold vol down + center, press power key, wait for update to complete.
Click to expand...
Click to collapse
Vol down + the back button
i did do this go info no image file i have version 1.37 what rom i must use ?Even to update windows to 6.5 english
Tajanstveni said:
i did do this go info no image file i have version 1.37 what rom i must use ?Even to update windows to 6.5 english
Click to expand...
Click to collapse
Just going by my Diamond and what you said in a previous post, it should say (quoting my diamond) "SPL-1.24. Hard"
You can't flash custom ROMs with a stock SPL.
Link for HSPL is in here, read along with it.
I tray to download renamed it put in root but when start loading file mising image file writte why?
Tajanstveni said:
Hay i have htc touch diamond how to uptade wm 6.1 to 6.5 ? I try to connect wia active sicron. But cannot uptade
Click to expand...
Click to collapse
please read this - http://forum.xda-developers.com/showpost.php?p=2508373&postcount=1
its one of the basic things we do... and you will get most of answers here...
this is 3rd topic on the forum for diamond - http://forum.xda-developers.com/forumdisplay.php?f=430
you can see other useful posts as well.... MTTY is highly recommended when you flash new rom to diamond...
Tanks for asnswer fast but problem is that i cannot conect device with pc when i start diamond ruu program later i get error 224 What i need some drivers for reconect to pc? I use microsoft active sycn 4.5 but i cannot coneect completly come message on display . Exist another method to connect touch diamond to pc ?
After factory default reset and format internal storage now is problem when i try to start rom uptadte from internal storage writte "loading ...." i wait more that 10 min nothing happend only loading.... where is the pronlem
Tajanstveni said:
After factory default reset and format internal storage now is problem when i try to start rom uptadte from internal storage writte "loading ...." i wait more that 10 min nothing happend only loading.... where is the pronlem
Click to expand...
Click to collapse
If you can connect to activesync (should be possible, since you are back to original),
use the customRUU method. At least that should give an idea of where the process is getting wrong, plus will allow recovery.
HTH...
Same Problem?
Tajanstveni said:
Hay i have a problem wih htc touch diamond when i tray to connect to pc with active sync 4.5 said that device cannot be sicnoized completly and i cannot update costum rom come error 224 device not found ,can anibody help me ?
Click to expand...
Click to collapse
Looks like you created a new thread for the same problem...
http://forum.xda-developers.com/showthread.php?t=643159
Sorry for my mistake but probolem solved ,tanks for help

Categories

Resources