Develop Bugs

Asus P750 - upgrade to VGA - How stable??

I saw the thread on this forum about the VGA ROM for the P750...
Unfortunately I am not an expert at all and perhaps maybe not the right place here for me to ask but here it goes,
Can I easily install and remove the ROM in case the the VGA patch starts bugging? and how do you install the ROM, is there are step by step manual floating around?
any feedback greatly appreciated!
bras

Hi, I did install the VGA ROM vers. 1.02 by Sorg & GreatVK and also tried the 0.17 by Sorg.
I didn't link the dual-mode keyboard (RUS-US) of the 0.17 and I think it has a higher memmory comsumition. So, I prefered the 1.02.
The 1.02 is stable, and the only problem I noticed is about the Live Messenger that do not works. The VGA screen is realy better!!!
If you do not like, you can install other dumped ROM or one of those you can find at asus website.
To install de Dumped: put the .nb0 file on a microSD (not HC) and press voice memo + down + power + reset.
To install de Shipped: put the .cap file on a microSD (not HC) and press voice memo + up + power + reset.
Here both methods works finte.
:hth:
[ ]'s
Bruno Leony

ok thanks alot
with dumped you mean the Sorg & greatVK rom and with shipped you mean the original Asus Rom?
you don t need to back up the original Asus ROM?

bras4real said:
with dumped you mean the Sorg & greatVK rom and with shipped you mean the original Asus Rom?
Click to expand...
Click to collapse
Yes
bras4real said:
you don t need to back up the original Asus ROM?
Click to expand...
Click to collapse
Depends, if your ROM is avaiable at Asus site you dont. Mine was WWE UK, there has just WWE SG, TH and MS at asus site. I restored my to SG with no broblems, just did the forced mode 1st and after coud do the normal one.
Wich ROM is currenty on your device (settings/ system / system information / version)?

I am running the VGA 0.17 Base and am very happy with it, only the Keybaord Thing drives me crazy and CoolCamera is a bit crappy......... But once you have seen the VGA, believe me you dont want to go back to QVGA. Also WM6.1 more stable in my Opinion than WM6.0 and few nice Things like a real Taskmanager......... attached a screenshot !!

I am using ROM version 4.8.4 NLD_NL00? is that for the Netherlands?

To install de Dumped: put the .nb0 file on a microSD (not HC) and press voice memo + down + power + reset........................
how hard can this be?
I installed 1.02 by Sorg & GreatVK file but when I (try) to press all 4 buttons above a screen comes up saying
Flashrom Update.....
IPL: iplPegP_4H3
but nothing really happens
what s going wrong? how u press all these buttons together?

Right Hand on Voice Button and Slider, left hand on J/Stick Press Reset w Stylus using your mouth....... Remember when flashing from SD Card only plug-in Cable after this...
Also for Cap File J/stick up and for nbo File J/stick up.....

sorry for this long message but I need to get this device running VGA along with another 3 collagues who will be operating the same device
to flash ROM/install the VGA patch ::
On the Asus mobile club it is explained as:
The way the first - with MicroSD card
1)take (preferably clean, just formatted) MicroSD card no more than 2GB (MiniSDHC PODOYDET NOT!) And copy it, the root, file PegasusP.nb0
2) present the card into the phone, the phone or connect to a computer or to power supply.
3)joystick down and slide the button to switch off the top Hold these buttons in a position to release and push briefly reset (now come in such rastopyrku ASUS!).We continue to hold the button until butbloka server It shall commence proceedings firmware
ok so installing the root folder which is thiS? My MicroSD folder is completely empty and how do I know it s not HC?
for the record, the joystick button needs to pressed down or up? manual above says down, you say up!
thanks for yr help

it seems to work now to some extent
in the boot menu it says ' PEGASUS NBO not found'
I checked in mobile explorer, the file is sitting there..
coulld it not work because my p750 is running on a Dutch ROM??? (the WM language is Dutch witch is not changeable it seems)

Copy The File PegasuP.nb0 to the just formatted Card, remember you must format FAT16 !! and then it should find it.......

Oh the the Card will say HC on it if it is !! To flash to another Asus OEM Rom (like WWE English) put the AsusP750.cap File on the Card and do the same Procedure only push the Joystick UP, then it will ask to be plugged into either USB or Charger Cable, after you do this the Boot will start. Then extract the the whole OEM Firmware onto the Card and upgrade again.

Alternate ways to load "PegasusP.nb0" ROMS
Hi all, just want to post something I found on this particular forum. Would help in loading of "PegasusP.nb0"
3 different ways to load the ROMs.
http://asusmobile.net/board/viewtopic.php?t=83
The USBLoader file can be found here
http://www.mediafire.com/?fa9a9vp2knb
Var.1 – Using MicroSD
1. Format your MicroSD card (max. capacity 2 Gb! NOT SDHC) and copy PegasusP.nb0 on it
2. Plug in you MicroSD card into smartphone and connect in to PC or plug in power adapter
3. Press and hold VoiceCommander button + joystick down + PowerButton up and press Reset once but keep on holding the buttons untill you see bootloader screen. Then it starts uploading new firmware
4. Smartphone will reboot and that`s it!
Var.2 for XP users!
1) Go to ActiveSync settings and check out (disable) USB cable connection
2) Perss and hold VioceCommander button + Power button up. Press Reset once but keep on holding the buttons untill you see bootloader screen.
3) Smatphone will turn on the bootloader mode throu USB
4) Connect P750 to PC and wait till PC will install drivers
5) start using command line: USBLoader.exe PegasusP.nb0
6) You can see the updating process both on PC and PDA
7) After it is done press Reset
Var.2 for Vista users!
1) 1. Perss and hold VioceCommander button + Power button up. Press Reset once but keep on holding the buttons untill you see bootloader screen.
2) Smatphone will turn on the bootloader mode throu USB
3) Go to Devices Explorer and find your PDA in: Mobile Devices -> Asus USB Sync. Unstall SPECIFIC driver with you can find in downloaded archive in USBAS folder. Make sure that you install THIS PARTICULAR driver
4) start using command line: USBLoader.exe PegasusP.nb0
5) You can see the updating process both on PC and PDA
6) After it is done press Reset
Click to expand...
Click to collapse

Hi All,
Will the above describe procedure force-load a ROM that is from a different region than the original ROM? There are some new 6.1 WWE ROMs on the ASUS website, but I can't get them to load since my phone is not from any of the regions available.
Has anyone tried the new ROMs? Any recommendations?
Dan

Dan.S said:
Hi All,
Will the above describe procedure force-load a ROM that is from a different region than the original ROM? There are some new 6.1 WWE ROMs on the ASUS website, but I can't get them to load since my phone is not from any of the regions available.
Has anyone tried the new ROMs? Any recommendations?
Dan
Click to expand...
Click to collapse
Yes it will force it to flash whatever region your device is from. As always use at your own risk.

P750
Hi All,anyone know how to disable the message instance reply after upgrade to wm 6.2 and also is there any smartdial with this ASUS p750 3g ppc.thanks

asus p 750 update error
hi guy's my asus p750 won't update just come at the update screen-sd download and standing they wont 2 finish pls help
thanks.....

Rom upgrade problem

Last night I wanted to install the official new dutch Vodafone rom for my diamond, from 1.37 to 1.97, so I started reading on the forums.
First I did a hard SPL, and now I have a SPL-1.30. Olinex, so I think that is right.
After the hard SPL I tried installing the RUU, but every time it starts installing, the progressbar stays at 0% and after some minutes, i get an 262 error. I tried it at several PC's, XP, Vista, Windows 7. So that is not the problem.
Anyone has an idea how to fix this?
greetings from holland, and sorry for my crappy english

Anyone has an idea, im realy wanting to upgrade

Sounds like u did everything right....but when flashing, using your pc is the last solution. Always flash Radios or Roms using the internal method.
Got this from Suiller:
COOKING ROMs & Radios from phone =-
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
I only hard reset after a new Rom has been installed.........I don't do this for Radios.

I have the vodafone 1.97 rom on my computer, but it is an exe file. And I can't unrar it. So where can I find that big.nbh file?

I placed the nbh file, and i called it DIAMIMG. But when i boot, i get a grey screen that says loading and doesn't goes away.
Help needed!

HTC-P said:
I placed the nbh file, and i called it DIAMIMG. But when i boot, i get a grey screen that says loading and doesn't goes away.
Help needed!
Click to expand...
Click to collapse
i know this may sound silly buy i am sure it must be like this diamimg.nbh
not DIAMIMG.
i hope this helps

HTC-P said:
Last night I wanted to install the official new dutch Vodafone rom for my diamond, from 1.37 to 1.97, so I started reading on the forums.
First I did a hard SPL, and now I have a SPL-1.30. Olinex, so I think that is right.
After the hard SPL I tried installing the RUU, but every time it starts installing, the progressbar stays at 0% and after some minutes, i get an 262 error. I tried it at several PC's, XP, Vista, Windows 7. So that is not the problem.
Anyone has an idea how to fix this?
greetings from holland, and sorry for my crappy english
Click to expand...
Click to collapse
Change the hard-spl to 1.93 olinex and your problem is over, has worked for me with all roms so far. And when you flash, put your phone in bootloader mode manualy and your flashes works every time.
And if the rom is a exe file you can forsure unzip it!! use right tool for that, ex. winzip and you have your .nbhfile
If the file is DIAMIMG.nbh you can rename it to RUU_signed.nbh and fla**** with udK.s Custom RUU

Maybe it's a noob question but where can i find the 1.93 version. And can i just install it over the SPL 1.30 version?
And how do i put it in manual boot?

Here you have the 1.93 version
http://forum.xda-developers.com/showthread.php?t=400950
just flash the new one over 1.30 version
Manual boot
Volumedown + reset (hold it down for a while, and the 4 color screen will appear)
Put manual boot only when flash rom!! not hard-spl

It finally worked! Thank you all!

HTC Diamond ROM Updating problem - ERROR [294]: INVALID VENDOR ID

Hi, tried to use search and found a lot of information about that problem, but non of them solved my problem.
So, i have HTC Diamond (P3700) (ROM: 1.93.479.3.WWE, Radio: 1.00.25.05, Protocol: 52.29.25.12H, S/N: HT841GN13099)
Tried download latest ROM version from official website (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483), but when i wrote my S/N i got error message - Sorry, this software download is not suitable for your device.
If i'll trying to download earlier ROM version (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2) with the same S/N I haven't any problem (of course and can install it).
Also I tried to download all ROM version from http://forum.xda-developers.com/showthread.php?t=471699, but when installing these ROM I always get an error - ERROR[294] : INVALID VENDER ID
In other thread I found link to http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem3, but when I was falling all instructions I get an error again (but now problem was with connection)
Also I wrote a letter to HTC support twice, but I didin't get any response
So maybe I can find somewhere S/N decoder to know more information about my phone (for e.gd phone was locked, or belonged to other operator?) and why I have problem when updating to the latest ROM version. Does anybody can suggest other solution to this problem?

You are unable to download the official rom from htc as your phone obviously was supplied by an operater who has put their own rom on it.
You need to proceed with a Hard-SPL if you wish to change ROM.
It sounds like you have an operater ROM so it's blocking your changing of the ROM to anything non-operater.
Read the wiki section for the Diamond here , especially the section : Upgrading / cooking / flashing.
with this section that clearly explains all you need to know about applying a Hard-SPL : Diamond Hard-SPL
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond

aE3-ink said:
You are unable to download the official rom from htc as your phone obviously was supplied by an operater who has put their own rom on it.
You need to proceed with a Hard-SPL if you wish to change ROM.
It sounds like you have an operater ROM so it's blocking your changing of the ROM to anything non-operater.
Read the wiki section for the Diamond here , especially the section : Upgrading / cooking / flashing.
with this section that clearly explains all you need to know about applying a Hard-SPL : Diamond Hard-SPL
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Click to expand...
Click to collapse
Thanks for your advices.
When I bought that phone seller didn't mention that this phone belongs to some operator. So is it possible to get information to witch operator it belongs (phone doesn't have any operator brands on his self, and isn't any special application or images in it).
And one more time... is it realy possible that phone belongs to operator... because like I wrote before that i can download and install earlier ROM from official web site, but problem is only with the latest ROM.

Perhaps the download doesn't work as many people had problems installing the latest rom ? It would reboot into the bootscreen & block.
Maybe they have the download until they know why it screws up (but works perfect via an internal flash).
Dunno though, as it's weird you getting the 'operater' message.
Anyway, you can get the latest official rom in here, so you'll be able to flash your device.
Here's the thread : http://forum.xda-developers.com/showthread.php?t=471699

Just flash it from the internal storage. Works fine. Extract the setup with winrar or something, then you will see 2 files - one approx 140Mb, the other one like 2Mb. Rename the big one to Diamimg.nbh and copy it to your internal storage.
* Soft Reset + Hold volume down button + back button <----
* Follow instructions on screen

vladasklp said:
Hi, tried to use search and found a lot of information about that problem, but non of them solved my problem.
So, i have HTC Diamond (P3700) (ROM: 1.93.479.3.WWE, Radio: 1.00.25.05, Protocol: 52.29.25.12H, S/N: HT841GN13099)
Tried download latest ROM version from official website (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483), but when i wrote my S/N i got error message - Sorry, this software download is not suitable for your device.
If i'll trying to download earlier ROM version (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2) with the same S/N I haven't any problem (of course and can install it).
Also I tried to download all ROM version from http://forum.xda-developers.com/showthread.php?t=471699, but when installing these ROM I always get an error - ERROR[294] : INVALID VENDER ID
In other thread I found link to http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem3, but when I was falling all instructions I get an error again (but now problem was with connection)
Also I wrote a letter to HTC support twice, but I didin't get any response
So maybe I can find somewhere S/N decoder to know more information about my phone (for e.gd phone was locked, or belonged to other operator?) and why I have problem when updating to the latest ROM version. Does anybody can suggest other solution to this problem?
Click to expand...
Click to collapse
Read here where it says "stops at 5% or invalid model id:
http://forum.xda-developers.com/showthread.php?t=409425
Next think about HardSPL.

1.93.479.3 if you had this rom in your device, and you tried to download from HTC Support site and get the "This is rom isnt for your device" you get this because there are NO 2.03.479.3 rom the BOLD tells you what region rom u are using. And If you download another rom and try to flash and get "invalid vendor" you MUST hard-spl your device, after that you can flash every rom you can find an example of region rom, I have put this at least 4 times now so people try o understand what i meen when speaking of region roms.
RUU_Diamond_HTC_DAN_2.03.403.2_
RUU_Diamond_HTC_SPA_2.03.412.1_
RUU_Diamond_HTC_FRA_2.03.406.2_
RUU_Diamond_HTC_GER_2.03.407.2_
RUU_Diamond_HTC_WWE-ME_1.93.456.2_
RUU_Diamond_HTC_Europe_2.03.401.2_

Thanks everyone for advices!
First i tried Kevbodian recommended method. Downloaded OliPro's NBH Util and tried rebuild NBH file, but program generates only empty file (0Kb - size), maybe it doesn't work in Windows 7 So I'm fail.
Then tried laser21 method and succeed! I downloaded Unsigned-Hard-SPL-Diamond-OliNex.zip (http://forum.xda-developers.com/showpost.php?p=2312363&postcount=2), installed them, and made everything step by step like he wrote.
Phone works seams fine, but maybe a little bit slower , so I'm tried reinstall ROM one more time, but do that in standard way. Just downloaded _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship (http://forum.xda-developers.com/showthread.php?t=471699) and ran it. Everything was fine (installation pass 100%) but than it shows - ERROR [270] - UPDATE ERROR, phone also restarted and shows information in red/green/blue/white background.
In red space
Code:
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
In green space
Code:
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Place try again
So one more time I made like laser21 recommended - and phone works again. But can I do something more that latter update i can do in standard way ?

I'm not sure what you mean by:
But can I do something more that latter update i can do in standard way ?
Click to expand...
Click to collapse
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache

band27 said:
I'm not sure what you mean by:
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Click to expand...
Click to collapse
I did everything like you (and laser21) wrote. But now i have problem when updating ROM in standart way - downloading official ROM exe file, and ran it (like I wrote before, after 100% proceed it display error that update unsucceed)
So why now I can't update ROM in standard way, maybe is solution to fix that problem ?
Sorry for mistakes in post

Try one more time with out any changes

omaga said:
Try one more time with out any changes
Click to expand...
Click to collapse
Hi, tried few times with different ROM versions (RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship). While installation goes everything seams fine, but when proceed 100% it displays same error (ERROR [270] - UPDATE ERROR).

vladasklp said:
Hi, tried few times with different ROM versions (RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship). While installation goes everything seams fine, but when proceed 100% it displays same error (ERROR [270] - UPDATE ERROR).
Click to expand...
Click to collapse
error 270 has happened before. try searching. I know I am an old hag, but this may be the best help I can give:
in google search for: "error [270] - update error"
include the "" marks.

help me
hi i have a big problem i have installed windows mobile update it worked good and i tried to install a plug for arabic language normaly the mobile have to reboot then i have the htc sceen forever i tried to reset with all way volume down botton and center button and reset botton , no way , volume down and reset botton and i have the color screen but no change , all way worked before installing the update , now no way , what can i do sorry for my english.

if you have a question
love_mido said:
hi i have a big problem i have installed windows mobile update it worked good and i tried to install a plug for arabic language normaly the mobile have to reboot then i have the htc sceen forever i tried to reset with all way volume down botton and center button and reset botton , no way , volume down and reset botton and i have the color screen but no change , all way worked before installing the update , now no way , what can i do sorry for my english.
Click to expand...
Click to collapse
please ask it only once....not 3 times in other threads...this is not allowed.
i have deleted them. read the rules before you post again.
thank you

band27 said:
I'm not sure what you mean by:
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Click to expand...
Click to collapse
This post is exactly what i needed to upgrade using the internal (memory) route.

touch diamond p3700 error
help me!!
My previous users of htc touch diamond p3700 s / n HT827GN42467 through my htc official site upgrade romnya WWE_2.03.707.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23 then I upgraded again so as Min 74 Evo 1.0 CHT 1.8.5 Full ITA .. problem after upgrading the screen does not go as originally only a white screen appears,,,, the program does not run again .....
solution please ....

help me please ....
My previous users of htc touch diamond p3700 s / n HT827GN42467 through the official website of my htc rom upgrade its WWE_2.03.707.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23 then I upgraded again so as Min 74 Evo 1.0 CHT 1.8.5 Full ITA .. problem after upgrading the screen does not go as originally only a white screen appears,,,, does not show the logo and the windows mobile does not work anymore at all also can not connect to pc ..... how can I fix that right again, the solution please ....

HTC TP2 bricked? Freezes at Start up!

Please help!
My HTC TP2 freezes at start up with the black screen and the Touch Pro2 Logo and some details in red at the bottom:
B 80
R 4.49.25.17
G 61.44tc.25.32U
D 1.86.67102
No USB connection can be established.
What happened:
1. Tried to update from original WM 6.1 to WM 6.5 by using the official HTC ROM update utility. Seems like USB connection broke during update and update freezed at 42%. Update utility process has stopped by itself (no process visible anymore in the Task Manager).
2. Restarted phone and multicolor screen appeared and stayed. After connecting with USB cable again "USB" appeared at the bottom. Started again the HTC ROM update utility which recognized the phone and started the update process again, but stopped at the beginning with an error message stating something like the ROM is broken.
3. Restarted again (by removing the battery and hit power button) and state reached like described above (HTC TP2 freezes at start up with the black screen and the Touch Pro2 Logo and some details in red at the bottom).
4. Performed a hard reset but did not help.
What can I do to bring the phone back to life?

So you can't or can get in the colored screen now? (the boatloader)
And it's kind of normal that their nothing happens after the tp2 + red information screen, this since their is no rom to startup.
EDIT
Is it possible to tell exactly what error you got?
EDIT
Try to hard reset your device, do you know how to do this?
If not this is how to do it:
To perform a hard reset
1. With the device turned off, press and hold the TALK/SEND, END and POWER buttons until you see this message on the screen.
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel."
2. Release the TALK/SEND, END and POWER buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Source: http://forum.xda-developers.com/showthread.php?t=523083
This is just what worked for me..
Had the same issue on my tp...
Hope it will work for you.

Did already the hard reset - but this did not help as nothing changed!
One further info: whenever I insert the battery the device automatically starts up - until it freezes again at the start up.
Can someone please help?

It's normal that the device starts up when the battery is plugged in...
But this is just what I know out of my own experience.
So sorry I can't help you farther.
EDIT
Did some research you might want to try to flash your phone by micro sd... (not for sure if it helps but by some people it did work)
Read the tread about flashing at the top of the rhodium section and you know how to do it.

Did another trial: downloaded and copied a RHODIMG.nbh to the micro sd card, inserted it again and pressed volume up at startup -> colored screen appears shortly, then switches to a white screen telling "Loading..." in blue font color, but nothing more.
Is there anybody out there who can help?
Do I need a specific RHODIMG.nbh to make this approach working? I didn't flash this device before, so it has been still in the original manufacturer's state.

frieder01 said:
Did another trial: downloaded and copied a RHODIMG.nbh to the micro sd card, inserted it again and pressed volume up at startup -> colored screen appears shortly, then switches to a white screen telling "Loading..." in blue font color, but nothing more.
Is there anybody out there who can help?
Do I need a specific RHODIMG.nbh to make this approach working? I didn't flash this device before, so it has been still in the original manufacturer's state.
Click to expand...
Click to collapse
suppose 2 press down volume not up after soft reset

This may help,
Try entering bootloader by switching off device then switch back on holding down the Vol down key.
If you can enter bootloader this way then you wil be able to flash from SD card following the instructions from here
http://forum.xda-developers.com/showthread.php?t=550540
if you want to flash the Official update from HTC you can extract the Nbh from the Exe file you downloaded from them, just use winzip, Zzip or Win RAR to extract the contents from the Exe you are looking for RUU_signed.nbh..follow the above thread instructions to change the name of the file to RHODIMG.nbh.
I DONT KNOW IF YOU NEED TO HARD SPL FOR THIS..Probably better to do it than not. Can Anyone Confirm???
i hope this helps

Device is up and running again !
Could enter bootloader mode and tried first to install again via the official HTC installer -> worked!
Thanks a lot for your support!

great news welldone Bro and welcome to the forum!!!

osrix25 said:
This may help,
Try entering bootloader by switching off device then switch back on holding down the Vol down key.
If you can enter bootloader this way then you wil be able to flash from SD card following the instructions from here
http://forum.xda-developers.com/showthread.php?t=550540
if you want to flash the Official update from HTC you can extract the Nbh from the Exe file you downloaded from them, just use winzip, Zzip or Win RAR to extract the contents from the Exe you are looking for RUU_signed.nbh..follow the above thread instructions to change the name of the file to RHODIMG.nbh.
I DONT KNOW IF YOU NEED TO HARD SPL FOR THIS..Probably better to do it than not. Can Anyone Confirm???
i hope this helps
Click to expand...
Click to collapse
For future info, from what I have gathered you must hardSPl for all ROM flashes. If the ROM you flash is the stock ROM, you can also revert your SPL to stock. For any other ROM, you must leave your device hardSPL'd.
Hope I helped.

how were you able to connect the phone with the pc. i seem to have a similar problem but am finding it difficult to connect the phone to the pc. i have activesync installed but cannot connect to the phone

osrix said:
This may help,
Try entering bootloader by switching off device then switch back on holding down the Vol down key.
If you can enter bootloader this way then you wil be able to flash from SD card following the instructions from here
http://forum.xda-developers.com/showthread.php?t=550540
if you want to flash the Official update from HTC you can extract the Nbh from the Exe file you downloaded from them, just use winzip, Zzip or Win RAR to extract the contents from the Exe you are looking for RUU_signed.nbh..follow the above thread instructions to change the name of the file to RHODIMG.nbh.
I DONT KNOW IF YOU NEED TO HARD SPL FOR THIS..Probably better to do it than not. Can Anyone Confirm???
i hope this helps
Click to expand...
Click to collapse
is it possible to connect to active sync in bootloader, cos my phone cannot even boot, it freezes up with a white screen and htc logo.

After entering bootloader you can flash either way,either by ruu package provided by your ROM's maker or running official ruu release or if you have the renamed file on the root of your sd card....I never use sd card flashing and have never had a failed flash...If in bootloader it will not connect with activesync,but device should be recognized by ruu.exe
WC

[q] big question

i yestrday updated may HTC DIAMOND with this
(_HTC Touch Diamond_MRII_RUU_Diamond_HTC_SVE_2.03.413.2_Radio_ Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe)..
but it still on swedish,can i download (RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.0 8_0.93.25_Ship.exe)
OR
[ROM][WWE/RO][01.OCT.09]Akeo_WM_6.1_WWE_Premium_Edition_V 2.0/RO_Standard_Edition V1
and updated again or not? im confused..im scared if phone crash if i updated now..can anybody help mi with answer

the ups can not succeed.
try again another great rom.
ROM can not up the shiprom the machine up normally if no genuine
Flash ROM guide HTC Diamond Direct ( shiprom)
This uprom compact way, no need to up the ROM machine is hence to minimize the errors arising from failure to connect
In this way, just up Radio ROM and takes up less than 4 minutes. Great speed.
When the follow up process follows:
1 / Select a file from the ROM NBH tail .. downloaded and renamed DIAMIMG.nbh
2 / Copy the file: DIAMIMG.nbh drop to the Internal Storage
3 / Soft Reset Button + Hold down the volume button and <---- back
4 / How to instructions on the screen press the power button to continue the process uprom
When will finish up the words you wait a little press ok then press the reset button or press volumdown + + softreset enterbutton to hadreset machine.