Bootloader on ASUS P535 - Upgrading, Modifying and Unlocking

Hi
please help me!
How can i get bootloader mode without reset button on Asus P535?
Reset button is broken?!?!?!
please help!
tnx

Doing the same when you press Power button to switch on should also do the trick.

hmmm, Try press and hold the button and remove the battery then re-insert back the battery??

i try....dont work!
power button + ???? please tell me!
or...how to convert nb0 files to cap files?
tnx

Hello,
To reset your Asus P525, do this :
1) turn it off
2) Push the button at the top (you have the square button, you push at the top of the button
3) without releasing the button, turn it on
Regards, Denis.

Asus P535 - REC button broken!! How to Bootloader???
Asus P535 REC button broken!! How to Bootloader???? Pleasssseeeeee!!!!!
Att.
Leo

Help! will not start I did not expect to update BootGalaxy.NB0 along and now will not start checksum ok! Update Fail! and all the ROM, although it about 1-2 h during the run out and only brought into the bootloader such as galaxy flashrom update but it does not look like something is missing from me a long time just not what tom. Raduga is much darker and, if the USB is removed from the red label. Just print it: Please plug AC / USB Cable! please help

Hi everyone, I am a new member just joined the community
to share my knowledge with others.

Related

I NEED HELP PLEASE _IMATE MW2003 SE_ EXPERTS HELP.

HI THERE, I WAS TRYING TO DOWNGRADE MY NEW I MATE AND SUDDENLY I GOT THIS MSG ON THE IMATE SCREEN "USB" ON THE TOP AND "V2. 06" WHILE THE IMATE IS ON THE CORDLESS. WHEN I TAKE IT OFF, IT DISPLAYS THIS MSG ON THE TOP" SERIAL" AND "V2. 06" AT THE BOTTON OF THE SCREEN . I WAS SICK OF THE CURRENT WORKING OPERATING SYSTEM AND TRYING TO DO SOME THING WITH IT.. HELP PLEASE
Do This first:
Press these 3 buttons at the same time:
Power button + Press the circle between the call answer and reject buttons + Soft Reset
Put the mobile into the cradel again and restart the (upgrade/downgrade) process.
which device do you have?
is it XDA2, XDA3 or?
if it shows 2.06 i suppose you have XDA3/Qtek909/pda2k.
right?
buzz

Universal Bootmenu

Can some pls help me how can I enter the bootmenu in Universal. I tried the combination given by wiki "camera + reset " but it doesnt works for me the device just soft rests. So pls can anyone help how can I enter the bootmenu pls.
thx
jeet
to get the bootloader you need to do power off + backlight + softreset.
i got the same problem as jeet got it, i cant get into the boot menu to get a sd bakup of my complete os
greetz
http://forum.xda-developers.com/showthread.php?t=549207
i know about that thread orb3000 but we dont talk about the BOOTLOADER, we talk about the BOOT-MENU where u can bakup ure ROM from current device to an SD card
i cant get into the boot menu if i push reset+camera !!!
thats the problem
grretz
didn't know Uni had a boot-menu
I believe for backing up ROM, you can use MTTY
I'm sure it's there in the wiki somewhere
Reset your device (using the SR hole) and then HOLD the camera button tight until you get the menu.
So the key thing is to HOLD the button after you hit the reset.
DOMy
you're joshing me? I have G3 and can't do that... (On WM6.51)
It simply boots up as normal. What does this 'bootmenu' allow you to do?

JAQ3 bootloader

Anyone knows how to put this device in bootloader mode??
and how to hard reset this device
thanks in advance
no nany help????
JAQ3 Bootloader
Hi to all please some body help I need to format my JAQ3 & enter Bootloader
boozer665 said:
Anyone knows how to put this device in bootloader mode??
and how to hard reset this device
thanks in advance
Click to expand...
Click to collapse
it can't be put on bootloader
you need a microsd card with less than 1 GB of size
then at laptop or desktop copy the .dip files from the rom (specific for JAQ3) in the root folder of the card
then turn off your jaq3 remove battery
put on microsd card
put on battery
press FN Key + Power on
Display will show up green and blue bars
after all bars complete
remove the battery and turn on the phone
that's all
regards!
jaq3
can sombody tell me where can i find the .dip files for my jaq3? ty
well the right way to hard reset this phone is not really like what mentioned in the previous reply but it s like what follows:
Turn off device, hold down send, end and camera buttons. Also press the power button then release all after on-screen prompt.

flashed dell x50v (how to fix...?)

Hi,
When performing downgrade from 2005 -> 2003se, I followed onscreen messages, but Axim is black/dead/ dunno what to do to "make him alive again" !?!?!
I searched a bit forums and found out that:
In a few seconds, you'll be prompted to do a hard reset by pressing the power and reset buttons simultaneously. Ignore this message. What you want to do is hit the power, wireless, and reset buttons again.
(http://www.downloadsquad.com/2007/08/17/how-to-downgrade-a-dell-axim-x50v-the-hard-way/)
BUT I did power/reset...
Is it possible to fix it not sending it so service?
I still have warranty by Dell, but I am not sure if they will cover that...
I used the following images for downgrade:
WM2003SE_A05_EN_X50v
with this filenames:
WM50_B_A05_X50v_WM2k3SE_EN.nb0
WM50_B_A05_X50v_WM2k3SE_EN_nb0.crc
WM50_K_A05_X50v_WM2k3SE_EN.nb0
WM50_K_A05_X50v_WM2k3SE_EN_nb0.crc
Current version running on Dell was AximX50v_WM5_A01_EN.
Thanks for any help and suggestions...
Regards
fixed it
It's working now...
After taking battery out, inserting it back... putting boot/image on sd card...
This is crucial: combination and timing
1. wifi+power button (pressed - hold them) + reset (quick press/release), in meantime hold wifi+power buttons and release them when loader menu shows!, (WM50_B_A05_X50v_WM2k3SE_EN.nb0)
2. !!!VERY IMPORTANT STEP!!!
A) device tells you to hard reset device (power + reset), DON'T do that!!!
what you need to do here is wifi+power, then quickly press reset button (less than a second) in the meantime button you need to hold buttons (wifi+power) until boot menu appears
3. choose this WM50_K_A05_X50v_WM2k3SE_EN.nb0, confirm it 2 times and wait for round 15min!
4. the result is: alive DELL with 2003se os, test this, 100% success guaranteed!!!
SUN with BIG SMILE appeared to me after DARK clouds
Cheers!
Cya
Thanks to Goldwin
A big clap for your clear and useful advice ; I was lost and you saved me.
Thank you very much .
By Geppoxy

ASUS P750 - VGA ROM available!!!

Well, we (Sorg and GreateVK) finished VGA ROM for ASUS P750.
Primary thread (on Russian)
http://asusmobile.ru/board/viewtopic.php?p=126563#126563
with Google translator:
http://translate.google.com/transla...?p=126563#126563&langpair=ru|en&hl=ru&ie=UTF8
Heya! Thanks for the work on the VGA rom! I tried to load it into my P750, unfortunately I'm getting the following error message:
Boot : Checksum error!
Update fail!
Not sure what's up with this but I was able to install your WM 6.1 rom perfectly. Anyone else having the same trouble?
Use original USB-cable. From MicroSD it's impossible to load VGA into P750
Oh, so I can just copy the nb0 file into the main phone memory? Is there a specific directory I need to copy the file to?
I've been installing roms via microsd card in the past, didn't know I can't do the same with the VGA rom.
Voice command botton does not active P750
Hi Sorg, GreateVK,
Last time before update cook rom v0.09, I can use voice command botton press force mode. Now it does not work. Other way auto run cab fr sdcard does not also. Do we have other way to downgrade or clear it. pls advice.
Thx, F
You flash it as all other cooked roms from the SD-card and force bootloader.
The v1.02 has a big time issue with memory leak, starts with 25 MB, but at the end of the day under 10 MB without any programs running...
Does this rom have a vga wireless manager?
I'm trying to find one to port to the E-ten x800 as the wireless manager from E-ten is pretty bad.
NO its the same one from WM6.0 but it is okay
Joost39 said:
You flash it as all other cooked roms from the SD-card and force bootloader.
Click to expand...
Click to collapse
Is there a topic where this is explained ? Would like to try VGA Rom but need to backup existing ROM first !
Hi Joost,
Thx for your advice,
--------------------
You flash it as all other cooked roms from the SD-card and force bootloader.
Is there a topic where this is explained ? Would like to try VGA Rom but need to backup existing ROM first
------------------------
1. How to flash fr sdcard? which rom version nbo, cab? where i can load?
2. I'm quite sure force bootloader cannot do it, Coz voice command does not active (voice command + slide power upward + joystick downward + reset)
3. VGA rom is nbo or cab file, the way to do as item 1 or not.
Pls advice,
Thx, F
Is this rom in english or russian language? can u please post how to flash the new rom in or a link to instructions please ? tnx
daraj said:
Is this rom in english or russian language? can u please post how to flash the new rom in or a link to instructions please ? tnx
Click to expand...
Click to collapse
Yes, it's in english!
Just copy the ROM file on the root of your sd card, plug the usb power (cable or power adapter) then hold the voice command button + hold power button upward + hold joystick downward + reset with the stylus
A bit difficult but not impossible
Thanks, do you know of a way to back up the existing ROM first to go back to it ?
GpsPasSion said:
Thanks, do you know of a way to back up the existing ROM first to go back to it ?
Click to expand...
Click to collapse
Very good question.
Ftogether said:
Thx for your advice,
--------------------
You flash it as all other cooked roms from the SD-card and force bootloader.
Is there a topic where this is explained ? Would like to try VGA Rom but need to backup existing ROM first
------------------------
1. How to flash fr sdcard? which rom version nbo, cab? where i can load?
2. I'm quite sure force bootloader cannot do it, Coz voice command does not active (voice command + slide power upward + joystick downward + reset)
3. VGA rom is nbo or cab file, the way to do as item 1 or not.
Pls advice,
Thx, F
Click to expand...
Click to collapse
Flash from the SD-card:
Org. roms: cap-file
Boot Loader Force Flash:
Plug into Charger (or Computer), Press the Record Button in and the Joystick UP and the Power/Hold Slider upwards and hold these three in Position and then press the Reset Button to start the Flash
Modded roms: nb0-file
Boot Loader Force Flash:
Plug into Charger (or Computer), Press the Record Button in and the Joystick down and the Power/Hold Slider upwards and hold these three in Position and then press the Reset Button to start the Flash
To backup your own rom you need to dump the rom- difficult:
But all the original roms are on the ASUS site!
ftp://ftp.asus.com/pub/ASUS/Mobile_Phone/P750/
Just download the correct one and reflash the phone.
mentox said:
Yes, it's in english!
Just copy the ROM file on the root of your sd card, plug the usb power (cable or power adapter) then hold the voice command button + hold power button upward + hold joystick downward + reset with the stylus
A bit difficult but not impossible
Click to expand...
Click to collapse
Now, here is how you do it
You start with p750 horizontally before you, the screen to the left, numpad to the left.
1. take the stylus into your mouth, locate the reset hole and slip it into it (do not push it yet).
2. left hand: hold the joystick down.
3. right hand: press voice record button and with the thumb slide the power button.
4. immediatelly push the stylus with your tongue and hold the whole combination for a second or two.
Joost: which one is the right one on ASUS ftp? I mean the qvga, English.
Take the Singapore one WWE SG !!
Anyone seen the French ROM on their FTP ?
Hi Joost,
Thx for yr time, finally my H/W voice command does not active. Now change MB can do everything. So far i test vga rom v.1.0 it's pretty display, memory too low, CPU slow down.
thx, F
Do the VGA Rom's available put the phone in VGA mode permanently or do you have the option to switch between VGA and QVGA?

Categories

Resources