HI THERE, I WAS TRYING TO DOWNGRADE MY NEW I MATE AND SUDDENLY I GOT THIS MSG ON THE IMATE SCREEN "USB" ON THE TOP AND "V2. 06" WHILE THE IMATE IS ON THE CORDLESS. WHEN I TAKE IT OFF, IT DISPLAYS THIS MSG ON THE TOP" SERIAL" AND "V2. 06" AT THE BOTTON OF THE SCREEN . I WAS SICK OF THE CURRENT WORKING OPERATING SYSTEM AND TRYING TO DO SOME THING WITH IT.. HELP PLEASE
Do This first:
Press these 3 buttons at the same time:
Power button + Press the circle between the call answer and reject buttons + Soft Reset
Put the mobile into the cradel again and restart the (upgrade/downgrade) process.
which device do you have?
is it XDA2, XDA3 or?
if it shows 2.06 i suppose you have XDA3/Qtek909/pda2k.
right?
buzz
Related
Hi, this is the 1st time for me, so please help me if you can.
I have i-mate PDA2K was working good, and once I wanted to put some programs like every time and suddenly the mobile turned to black screen with this word 'serial' and when I connect it with PC gives me 'USB'.
and when I tried to reinstall the WM2003 again it gives me error 120
country ID error and gave me this:
The ROM image that you are trying to use is not designed to work with your device. Please check the vender Web and dounload the correct ROM update.
then I tried to install WM2005 and it was accepted but the problem is:
I can't use green and red buttons and I can't use the mobile.
Also I can't format the device even with pressing (Power + camera + record + soft rest).
so, please if any one has Idea give it to me
thank you.
read wiki, just click on my signature
or just press reset button with stilus
Guys... please help
I download ROM IVAN beta7... then flash to my Exec...
The process looks goog... everything is fine...
After all is done... the I do hard reset (press both soft key+reset)... on screen appear press 0 to restore fact setting... then I press 0... after that
Nothing happen to my Exec... Screen is dark....
Then I reflash again, but the program says connection error... I think this is because my Exec is off...
Please help
Thanks
Try to reflash it. You should simultaneously press "Light" and "Power" button and reset it. Your screen will say "Serial" and when you insert USB cable it will say "USB". Then you should be able to run flash utility again.
Shishko
Finally works ...
Finally I can upgrade my Exec
I saw the thread at http://forum.xda-developers.com/viewtopic.php?t=59832
Thanks
Is This the correct section ?
I have a xda2 exec. I tried to update my rom, the congratulations screen displayed with a checking informaton on device message, this froze for some time so I disconnected the usb cable. when I tried to reset it, I get is a dispaly with just colours on it and it does nothing else, when I try to update again it shows an error connection error 101, also the device is not recognised. Is there a way to resolve this issue please and can someone be kind enought to direct me.
I used the rom update from - my-xda.com/xdaexec_soft2.html
Thank you in advance.
Try to hard reset your device
hold buttons: "-" + "-"
and then reset
so in practical terms, push the top 2 dash keys which are between your green and red phone icon buttons, and while holding them reset your device using the pen.
this should give you a white screen with a little menu.
You can now select clear device or something, I think it's the 0 or the X
it should work
if that doesn't work try to put your device in Bootloader
buttons: Backlight (front little button) + power button + reset button (with your pen)
again, hold the backlight and power button, then reset button
the screen should be dark, but if you look real close it would say USB or Serial v1.0 or v1.1 or something
you should be able to flash now using the tool
Also look around on this forum, loads of topics about upgrading/flashing and hanging problems
more info: http://forum.xda-developers.com/showthread.php?t=290234
u might have to update bootloader, try 2 read wiki.xda-developers.com lots of usefulll infos for beginers
Thank you
To both members above, thank you for your time. I am now using the update tool, hopefully this will now work. I used the method pressing the light button and power and reset. (Bootloader)
Hi
please help me!
How can i get bootloader mode without reset button on Asus P535?
Reset button is broken?!?!?!
please help!
tnx
Doing the same when you press Power button to switch on should also do the trick.
hmmm, Try press and hold the button and remove the battery then re-insert back the battery??
i try....dont work!
power button + ???? please tell me!
or...how to convert nb0 files to cap files?
tnx
Hello,
To reset your Asus P525, do this :
1) turn it off
2) Push the button at the top (you have the square button, you push at the top of the button
3) without releasing the button, turn it on
Regards, Denis.
Asus P535 - REC button broken!! How to Bootloader???
Asus P535 REC button broken!! How to Bootloader???? Pleasssseeeeee!!!!!
Att.
Leo
Help! will not start I did not expect to update BootGalaxy.NB0 along and now will not start checksum ok! Update Fail! and all the ROM, although it about 1-2 h during the run out and only brought into the bootloader such as galaxy flashrom update but it does not look like something is missing from me a long time just not what tom. Raduga is much darker and, if the USB is removed from the red label. Just print it: Please plug AC / USB Cable! please help
Hi everyone, I am a new member just joined the community
to share my knowledge with others.
Hi I Have Orange SPV M650 Hi Was Not Starting I Make Hard Rest But screen was not appernce but i press recod key and power on hi has on with multi coulors but dont connect to pc sound was appers but dont connect wich pc or Active Sync PLzz Help me I Verry Thankful to u... i m still waiting for replys and sorry for my english... brothers.. :-(
gbuttg said:
Hi I Have Orange SPV M650 Hi Was Not Starting I Make Hard Rest But screen was not appernce but i press recod key and power on hi has on with multi coulors but dont connect to pc sound was appers but dont connect wich pc or Active Sync PLzz Help me I Verry Thankful to u... i m still waiting for replys and sorry for my english... brothers.. :-(
Click to expand...
Click to collapse
I think you're wrong in doing a hard reset the device
so how to do a hard reset
To perform a hard reset
Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the lower left side of your device.
Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press Send to restore manufacturer default, or press other keys to cancel.“
Press on your device. Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
blother my phone was not on with this reset i try befor your telling.. plz help me i m very appset...
help me
Brother I m Try All Way But My Phone Was Not Working .. :-( Plz Help Me I m Verry Thankfull To U Brother... check my link
please check it. i connect to pc for update room. he show me connected but not connect on Activesync.. plz brother any sulotion for my cell?????
help me
plz brother help me :-(