Develop Bugs

Guys, need hlp. Eten m700 not starting.

Hello everyone.
I do have some experience with rom modifications on my I-mate Jam, but this was the first time I tried to change my m700's rom.
Things I've removed from my rom (pretty fearsome):
-------
OEM\OEM_Lang_0409
blank.pwi
meeting.pwi
memo.pwi
phone.pwi
todo.pwi
OEM\OEMDrivers
Avrcp_MPplugin.dll
SYS\BaseApps\
-ApproveUpdate\
-AUTOUPDATE\
-Autoupdate_Lang_0409\
-caldll.dll\
-calendar.exe\
-calnot.exe\
-calstore.dll\
-calupd.exe\
-fexplore.exe\
-hotvoice.exe\
-idledetect.exe\
-notes.exe\
-pimapi.dll\
-pimdlg.dll\
-pimg.exe\
-pimgdll.dll\
-pimgres.dll\
-pimstore.dll\
-taskdll.dll\
-tasks.exe\
-calc.lnk
-calendar.lnk
-MobileCalculator.exe
-notetake.lnk
-pimg.lnk
-tasks.lnk
SYS\Browsing\
SYS\Browsing_DPI_96\
SYS\Catalog\
SYS\Catalog_Lang_0409\
SYS\Entertainment\
SYS\Entertainment_DPI_96\
SYS\Entertainment_Lang_0409\
SYS\Entertainment_Lang_0409_DPI_96\
SYS\FWUPDATE\
SYS\Fwupdate_Lang_0409\
SYS\IRDA\
SYS\IRDA_Lang_0409\
SYS\MediaOS\
SYS\MediaOS_Lang_0409\
SYS\MediaOS_resh_240_resv_320\
SYS\Office\
SYS\Office_DPI_96\
SYS\Office_Lang_0409\
SYS\Office_Lang_0409_DPI_96\
SYS\Os\
-ircomm.dll (only!)
SYS\Shell\
SYS\Transcriber\
SYS\Transcriber_Lang_0409\
SYS\Transcriber_Lang_0409_DPI_96\
SYS\WindowsLive\
SYS\WindowsLive_DPI_96\
SYS\WindowsLive_Lang_0409\
-------
I didnt modify my registry, cause I thought it will give errors, but the rom will still be working. I was going to clean up non existing keys with sktools.
I've packed my rom back, everything went ok.
I've uploaded rom to my eten m700 via usb. Again everything was ok.
Then I've made a hard reset (after the installation) and the device booted (the screen was orange). But nothing happened after. The device froze.
_______
Could it happen becouse I didn't remove 'today plugins' in a registry?
Or some programms are hardcoded to wince, so u just cant boot without them?
-------
Oh yes, ActiveSync doesn't see my device. I've heard it is possible to start usb sync from the knight mode. How do I do it?

press the camera button and screen off button together. reset the cellphone while still holding the two buttons. it will go to dark mode

Thx for the tip.
In test mode, I've found out that my Os image checksum is smaller. So I'd probably add irda dll back. I'll also remove all today plugins in registry settings to make sure the os can boot properly.
------
Here comes the question!
I enter the bootloader mode on my device. It says USB host is connected. Waiting a download.
But my activesync doesn't see the device... And when I start upgrading the device here what comes out:
Can't connect to the device. Please make sure ActiveSync is working normally.
How do I fight this? I don't have a sd card yet...

[Solved]
Yes, there is a trick! Thx to Юрка, from 4pda.
U just need to plug any other communicator (wince) to the cord, start the updater. When it comes to the download (black pic apears to the left, saying smth about download)
-put your nonworking device in a bootloader mode (hold down turn on/off button + recorder button and push restart, then release power button, but still keep holding the recorder button)
-unplug ur other device from the cable
-plugin the eten nonworking device
click upload and after everything went well - ENJOY!

pls help!!!!wm6 hard reset

hello i have wm6 on my ba and i wanna give hard reset!!! i don't know how! please help!!!!

Have a look here:
- http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
- http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
And next time try this one: http://forum.xda-developers.com/search.php
Greets Rossi

pls help~~~
where? i have ba whit wm6!!! i try all of them for there, not working! there is for ba whit wm5 or wm2003! for wm6 nothing!

helppp!!
on/off + reset button at the same time... not work!
recor+ on\off+reset =serial message on the screen ( i think that is bootloader)
anything alse i need! please helppp!!!

I can't hard reset either
I have followed all of the directions on the wiki, I have even tried to install another rom and it still will not remove all of the data, it changed the information in the about section of my settings but that's it. I want to change ROMs but it is not working. any ideas?

What version of windows is on your PC?
also try the enter BL which is on most ROMs

Hard Reset
To hard reset you do a soft reset (power + reset)
and before it shows the version numbers at the bottom you have to press Record + Camera & also power (i think) and then you come to an options screen using the record button to go down the list and camera to select you select Yes for option 2 and 3 and then hit the mail button to apply.

jidi22 said:
hello i have wm6 on my ba and i wanna give hard reset!!! i don't know how! please help!!!!
Click to expand...
Click to collapse
swick off button & rest buton in the same time but take care if is not the original windows you may have problems
Warm Boot: Reset the unit by pressing reset button.
Cold Boot: Press Power ++ Reset the unit simultaneously.

Read this. It's how to hard reset your BA. Hope it helps. Make sure you already formated the storage.
Code:
http://wiki.xda-developers.com/index...izzardUpgrade4

Some trouble...

Hi,
I think my diamond is briked...
It stays stuck at boot with version numbers and nothing else. I have try hard reset but it doesn't work...
I saw on some other thread we can use remote command with Qmat or mtty but my device is not recognised by operating system (vista)
R 1.00.25.08
G 52.32a.25.17
D 1.93.00.00
Any clue how I can get it back ?
thx

SO with some more research I have find my way out, and for noob like me who want to get out the rom non boot, you just have to reset your diamond while pressing both of the volume button to enter in bootloader again and proceed another flash.

Need desperate help with possibly bricked Diamond

Hi all,
Just received my Vodafone-branded Diamond, and I'm afraid I already managed to brick it!
It was equipped with version "1.37.172.3 NLD" so I decided to upgrade it to the latest version.
The installation of OliNex Hard-SPL 1.93 went flawless, but the installation of ROM "RUU_Diamond_HTC_WWE-ME_1.93.456.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe" stopped at about 25% with error code 302. The recovery method that came with the package didn't help, every time the upgrade stopped at the same moment.
Since the device is stuck in the bootloader, and I'm left with a non-chargeable battery, I tried the official Vodafone-branded "RUU_Diamond_Vodafone_NL_1.97.172.4_Radio_Signed_Diamond_52.44.25.24_1.08.25.08_Ship.exe" ROM. Unfortunately, this upgrade stops at 48% and throws the same 302 error.
Anyone who can tell me what I'm doing wrong, and what I can do to solve all this?
I hope I don't have a brand new, but bricked device on Christmas!
TIA and have a nice day.

Try a hard reset first. If this doesn't help google or search at XDA for MTTY.
This tool can fix your device

http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader
Try this, maybe will work

Try a Vodafone branded stock rom before mtty.
Regards,
Carty..

He already tried a stock rom....

Potential Solution
Have you looked at the thread titled,
[UPG][TRBL]How-to fix: Update/Flash doesnt work, stops at 0% or 5% (invalid model ID)
It may just be a model ID glitch that can me fixed.
Take a look. It's in this forum in a sticky by cptsunshine.

Thanks all for the help, I'll have a look at your suggestions.
The problem isn't that it stops at 0% or 5%, it stops at random percentages (depending on the ROM I use).
I also see the bootloader (red / green / blue), so it's not dead. I guess it's just that it doesn't pick up a ROM.
Besides, the bootloaders says upgrade ROM code error please try again.
Edit:
A hard reset doesn't seem to work. In the bootloader, when I press "volume down" and "enter" together, and press the "reset button" the screen goes black, but then goes back to the bootloader screen after a sec or 2.
Edit 2:
MTTY doesn't do much either, after executing "boot" the phone is showing me the Vodafone logo and that's it.
For the rest, MTTY shows me the following:
Cmd>boot
InitDisplay: Display_Chip=1
dwDirectNum: 0, dwMatrixNum: 0, dwMicroPNum: 0
Fixed new dwPSImageSize = 0x53E0000

Install Rom via Internal Memory Method
Steps from Suiller:
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Let me know how it goes.
Make sure you have Net framework 3.5 installed on devices.

Nakkie27 said:
Thanks all for the help, I'll have a look at your suggestions.
The problem isn't that it stops at 0% or 5%, it stops at random percentages (depending on the ROM I use).
I also see the bootloader (red / green / blue), so it's not dead. I guess it's just that it doesn't pick up a ROM.
Edit:
A hard reset doesn't seem to work. In the bootloader, when I press "volume down" and "enter" together, and press the "reset button" the screen goes black, but then goes back to the bootloader screen after a sec or 2.
Edit 2:
MTTY doesn't do much either, after executing "boot" the phone is showing me the Vodafone logo and that's it.
For the rest, MTTY shows me the following:
Cmd>boot
InitDisplay: Display_Chip=1
dwDirectNum: 0, dwMatrixNum: 0, dwMicroPNum: 0
Fixed new dwPSImageSize = 0x53E0000
Click to expand...
Click to collapse
u can do one thing then press woluem down and reset bottom at the same time then u go to rescue mode then u wait and put in the usb stick and there stand seriel when u put in the cable it will change to usb thenu can load the firmware again

band27 said:
Steps from Suiller:
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!
Click to expand...
Click to collapse
I wish I could mate, but I cannot put files on it anymore, since ActiveSync doesn't recognize my device when it's in the bootloader.
janielsen said:
u can do one thing then press woluem down and reset bottom at the same time then u go to rescue mode then u wait and put in the usb stick and there stand seriel when u put in the cable it will change to usb thenu can load the firmware again
Click to expand...
Click to collapse
Can you please be more specific? Are you telling me how to do a hard reset? I tried as to do a hard reset, but it goes back to the bootloader instead of resetting. USB stick?
Thanks all, much appreciated. A pain this can happen, looking at the fact that I did everything exactly as described in all these flashing manuals.

Nakkie27 said:
I wish I could mate, but I cannot put files on it anymore, since ActiveSync doesn't recognize my device when it's in the bootloader.
Can you please be more specific? Are you telling me how to do a hard reset? I tried as to do a hard reset, but it goes back to the bootloader instead of resetting. USB stick?
Thanks all, much appreciated. A pain this can happen, looking at the fact that I did everything exactly as described in all these flashing manuals.
Click to expand...
Click to collapse
first push the volum down buttom at the same time press the reset buttom then the 3 color display will appear and in the buttom will stand seriel then u putt in the usb cable to ur phone whit u have attact to ur pc then it will say usb now u can load new firmware

janielsen said:
first push the volum down buttom at the same time press the reset buttom then the 3 color display will appear and in the buttom will stand seriel then u putt in the usb cable to ur phone whit u have attact to ur pc then it will say usb now u can load new firmware
Click to expand...
Click to collapse
No mate, I never had problems getting into the 3 color screen. The problem was updating afterwards, which never completed without error code 302.
Anyway, I guess I just fully bricked my device after putting SPL-1.40.OliNex (according to the guide at http://forum.xda-developers.com/showthread.php?t=416211) on it. The SPL install was succesful, but when booting I'm now not even getting to see the 3 color bootloader. All I see is the Vodafone logo with some version numbers at the bottom, but that's it. It doesn't boot further on, and I can't get a USB-connection.
Edit:
Volume down + reset brought me in the bootloader again, although it's saying SPL-1.93.OliNex.

Nakkie27 said:
No mate, I never had problems getting into the 3 color screen. The problem was updating afterwards, which never completed without error code 302.
Anyway, I guess I just fully bricked my device after putting SPL-1.40.OliNex (according to the guide at http://forum.xda-developers.com/showthread.php?t=416211) on it. The SPL install was succesful, but when booting I'm now not even getting to see the 3 color bootloader. All I see is the Vodafone logo with some version numbers at the bottom, but that's it. It doesn't boot further on.
Click to expand...
Click to collapse
that i know but as i say in the post that when u do it that way i say u can load new firmware whitout it needs to boot try my friend i have done it 3 times because wrong loading of firmware

u have to only push thoose 2 buttom then it will work because u go to rescue mode

But what will that give me extra? I can access the Hard-SPL 1.93 bootloader (3 color screen), and I can get into USB mode. It's just that the upgrade of both firmwares stop at a certain percentage.
I'm constantly trying to hard reset the device, but after pushing the reset button (with both volumn down + enter pressed down), the device just reboots back into the bootloader and doesn't give me the hard reset warning.

Nakkie27 said:
But what will that give me extra? I can access the Hard-SPL 1.93 bootloader (3 color screen), and I can get into USB mode. It's just that the upgrade of both firmwares stop at a certain percentage.
I'm constantly trying to hard reset the device, but after pushing the reset button (with both volumn down + enter pressed down), the device just reboots back into the bootloader and doesn't give me the hard reset warning.
Click to expand...
Click to collapse
u need to hold them down until it leave the 3 color display an turns into grey

Ok, finally managed to do a hard reset. Afterwards I tried upgrading to the official Vodafone NL 1.97 ROM once more, but it failed at 48% again.
Any ideas what to do? I know have Diamond with Hard-SPL 1.93 (which says upgrade ROM code error) with no working OS.

Ok all, got it finally working again!
Don't ask me why, but flashing the newest Dutty ROM (and the included radio) did work.
Thanks for all your help, and a wonderful evening!

Hi all,
I have a quit similar problem. I've read a lot, but couldn't find an answer to my problem - may bye someone can help me.
I updated my Dimond (OliNex Hard-SPL 1.93, radio 1.09.25.23 and rom dutty V4). When I start my phone most of the time (95% plus) I end up in the color screen - however some time it's starts perfect (without changing anything).
When I get stock in the color screen, I can start the phone with mtty and the command "boot".
What can I do to make my phone always start in the normal way?
Thanks!

Nakkie27 said:
Ok all, got it finally working again!
Don't ask me why, but flashing the newest Dutty ROM (and the included radio) did work.
Thanks for all your help, and a wonderful evening!
Click to expand...
Click to collapse
i smell a radio issue - last time i was trying to upgrade my radio - ended up with something similar, managed it out like you did - but now you're up - so that's good!!
try some other rom (this time without radio) - i don't think you should have any issues going forward... good luck and have fun!

can't install dutty v4 for my diamond :(

hey guys
how is it?
i have a problem with my diamond, its very strange
i already installed hardspl 1.24 on the phone
and now if i want to install the dutty v4 for my diamond .. alway when i click update to this rom its restarting active sync or the vista tool gets closed and the device isn't updating
on myother windows xp machine there is a application error if i want to start the dutty tool
can anybody help me?
thanks in advance and have a great week
rob

You should install this using the internal method.
Just grab the .nbh file and rename it DIAMIMG.nbh
Put this in your Internal 4GB storage.
Soft reset your device and immediately press the Vol. Down and back button and a grey screen will appear. Vol up to install. After, don't forget to hard reset your phone.

hey you
thanks for your quick answer
but it isn't working if i soft reset the device and press vol down and back (the arrow which is pinting to left) it doesn't open a menu!
do i need a special hard spl? or do i something wrong on the reset?
i just don't get te screen, it's just starting normally
really strange!
thanks in advance

robsterr said:
hey you
thanks for your quick answer
but it isn't working if i soft reset the device and press vol down and back (the arrow which is pinting to left) it doesn't open a menu!
do i need a special hard spl? or do i something wrong on the reset?
i just don't get te screen, it's just starting normally
really strange!
thanks in advance
Click to expand...
Click to collapse
No, a special hard spl is not required. Any one will do. You are probably not doing the procedure quick enough. Try again.
When you soft reset get your hands immediately ready to press both (Vol. Down + Back Arrow Button). HOLD this until you see the grey menu and follow the instructions.
And make sure the DIAMIMG.nbh file is in your Internal Storage (4GB)

On my phone, the vol-down + back-button doesn't work either. It just resets the phone as normal. A vol-down + enter-button does move it to the hard-reset screen though, then an up-arrow finishes the hard reset, but not loading the DIAMIMG.nbh file. Maybe they removed the vol-down + back-button? Or changed it somehow?

Make sure that your internal storage is FAT32, It wont work if it is anything else

When you get to the grey screen, it tells you to Press the power button to update

razorbud said:
Make sure that your internal storage is FAT32, It wont work if it is anything else
Click to expand...
Click to collapse
Yep, fat32...
LandyMan said:
When you get to the grey screen, it tells you to Press the power button to update
Click to expand...
Click to collapse
Doesn't work, and the text is not there either.

I also think it's important to change the name .nbh before you transfer it to your phone, at least it was for me!

Well, I figured out one mystery. For my model version, it's not vol-down + back-arrow to get into the SPL screen on power up. It's vol-down only while powering on the device. Go figure!
Still stuck with no ability to install Hard SPL though

scottwilkins said:
Well, I figured out one mystery. For my model version, it's not vol-down + back-arrow to get into the SPL screen on power up. It's vol-down only while powering on the device. Go figure!
Still stuck with no ability to install Hard SPL though
Click to expand...
Click to collapse
ALL MODELS SHOULD BE THE SAME>>
Basic Info.
(Soft Reset and press Vol. Down) = Get To Bootloader
(Soft Reset and Press Vol. Down + back-arrow) = To Install Radio or ROM form Internal Storage (must have DIAMIMG.nbh in first before flashing)

To confirm that there is no confusion. The "Back arrow" button is the one above the hang up button. NOT left of the middle circle button
So press volume down, Back arrow and then with your third hand, press the reset button with the stylus. Continue to hold the Vol Down and Back Arrow until the image install screen appears. (about 2 seconds)

Sorry guys, no the back-arrow button plus Vol-down does not work. Vol-down alone does. The new phones are different, I'm almost 100% positive they are. The stock SPL was version 1.95 which I've not yet seen here. And, I can't seem to dump any of the ROM (and now can't dump the SPL, BUMMER!, but that's another issue...)
But vol-down + enter + reset does give the clear memory option, with a slightly different wording on the reset screen that what I've read here that it should be.

scottwilkins said:
Sorry guys, no the back-arrow button plus Vol-down does not work. Vol-down alone does. The new phones are different, I'm almost 100% positive they are. The stock SPL was version 1.95 which I've not yet seen here. And, I can't seem to dump any of the ROM (and now can't dump the SPL, BUMMER!, but that's another issue...)
But vol-down + enter + reset does give the clear memory option, with a slightly different wording on the reset screen that what I've read here that it should be.
Click to expand...
Click to collapse
Well so far your device seems to be the first out of the gate that reacts this way.
Sorry to hear!

dude plz help me where can i get dutty v4 rom for diamond......