Related
I just bought a o2 xda 2s on ebay.
I was wanting a pocket pc phone that i could hook up to a serial port device I use at work.
The phone works great so far but when i installed the program i use at work everytime i try to load a file it freeze's while trying to load file. I have used this program on HP pda's with not 1 issue. Just wanted to have a all in 1 handheld unit.
Currently this is what I have:
Model: ph20b Pocket PC
wm2003se
version 4.21.1088 (build 15045.2.6.0)
rom version 1.40.00 WWE
rom date 3/10/05
radio version 1.12.00
protocol version 1337.42
ext. rom version 1.40.242 WWE
What would make it freeze like it does, only with this program, and can i upgrade to wm5 (how?). Are there any other upgrades you know would make it more stable a fix the freezing issue?
This is the first pocket pc phone i have had so i have no idea as to what,where and how to start fixing.
Thanks for any help you guys may provide!!!!
For WM5 look here http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home my signature shows what Rom I use. I find it good. I don't what could be causing the freezing. What is the program?
Here is a link to software im using.
http://www.racetech.com/SubMenu.asp?cMenu=11&c=Yes&cSubMenu=92&showPage=da
I have read the info on ba wm5 rom and still dont know how to install. i use a pc to check email and thats it, so im a little new to this stuff.
Can someone help step-by-step me through this a little
do i need a sd card as i don't have one. to update to wm5
The phone is new and i dont' have any data on it that i need.
Thanks Guys
I have downloaded the following file on my PC Desktop.
Helmi_wm2k5_aku3.2_32mb (rar file)
I extrexcted it in its own new file and now have the following files.
1)extrom
2)AddOn
3)ph20b
4)ph20b1
5)wm2k5_aku3.2_32mb_v1.3.2
6)Helmi_aku3.2_v1.3.2.txt
what next?
Yes you would need a SD card you can get a 1gb really cheap on ebay and then you can store programs etc on it.
Well I must confess I haven't done it I bought mine of ebay with WM5 on it already. The fellow I bought mine off will upgrade other units for $150 AUS I think. If you aren't in Aus he still would proberly do it.
i got wm5 in an exe file from www.buzzdev.net i think and all i had to do was put my xda 2s in boot loader mode stick it in its cradle and run the file easy peasy
you DO - NOT need an SD card (i did it , i dont have one)
here is the guide to install
http://wiki.xda-developers.com/index.php?pagename=Helmi
i DID NOT DO THE OPTIONAL INTERNAL MEMORY BIT
Copy the nk.nbf file to folder that match ur device (PH20B/PH20B1)
* Determine your operator Information e.g.: "T-MOB101", or "Vodafone", or O2. See GetDeviceData.
* Open a command prompt, (open "run", type cmd , press enter), go to the folder where the ROM(nk.nbf) file resides (mine is c C:\Documents and Settings\Administrator\Desktop\pda\oprade\Helmi\PH20B - notice the c is the command) and execute: SetOperator ??? (where ??? is your operator , mine was SetOperator ORANG001)
# Put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button
# Connect the phone to the sync cable/cradle.
# Now you can upgrade the ROM using BaUpgradeUt.exe(i used this one) / MaUpgradeUt_noID.exe
#
When the upgrade is completed, you must perform a Hard Reset
1.
Press and hold the "Power" button, and then press the Reset Button. Colored stripes (the bootscreen) will appear on the screen.
*
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
o Quickly press "Record" & "Camera" before the versions appear at bottom right
o OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
*
If you have a PH20B1 device such as SX66:
o Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
o OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
2.
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
* If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
* If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
3. Press the "Mail" button. A white screen will show for a while, while it is clearing your device in preparation for the new ROM to start executing
4. When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly ...
once done copy what you need (i installed all the fixes etc) from the extrom folder to your ppc and run them to install them (once done delete the cabs)
*note doing this way you will need to setup your gprs and mms settings for your network*
Ok I'm going crazy. Where in the heck do I find setoperator.bat??
Thanks
Hi all,
Not sure if this is the right place to ask but I am stuck at a dead end.
tried to upgrade PDAL ROM to 3.0 (from 2.01)
Got a blue i-mate screen never went out of it.
tried all the hardreset tricks, no use.
tried to reinstall RUU with activesync, no use.
What else can be done?
for example, would it be possible to delete the ROM totally and reinstall it? how?
Appreciate your comments
regards
sy
I have the same problem
Would anybody be able to help, please reply to us. Thanks!
I've just spoken to the customer service from i-Mate. This issue can only be resolved by their service centre. So, no any simple solution so far.
Please be aware when you want to upgrade it.
my device is in service center for 7 days and they could not come up with a solution. I hope it is because they did not start working on it yet
1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
hi
wher i can find the Romupdate with arabic or without
and
how i can hard resit from the key not from system
th
Don't think mtty will work as PDAl is not an HTC device..
dear gun
thanks for your info but i want to ask you a Quastion from where i can get the driver for pdal in bootmode (rndis omap730)
thank you
PDAL Problem
I too am facing the same problem with my PDAL. I upgraded the rom version and now am just getting the initial blue screen with the imate details. Please help in solving this as i just cant seem to be going forward. Any ideas how to get the device booted up and working .
response to the above two question
1. How to enter Bootloader in PDAL?
I inquired the service people and was told it can be done by pressing power button and left soft key simuteneously and tap the reset hole. I have tried and it did work.
2. Any solution for not passing the welcome screen?
It seems there isn't any solution, other than sending to their service centre. It will take a long time. My phone has been there over 2 weeks but I was told they are still awaiting part. I guess they will replace the main board.
3. PDAL isn't HTC device?
I think it is. The code with HTC should be Pean. The service centre also listed it as HTC device. But I am not sure if MTTY can work.
How to enter Bootloader in PDAL?
my phone alwys login blu scren then restart
Im pressing power button + left soft key and tap the reset hole but not wok in Bootloader !!!
Flashing your Imate PDAL
Dear All,
I Have enough experience of Imate PDAL , It's too simple , just follow the steps below:
1- got any ROM version from Imate website "www.clubimate.com"
2- Format your Imate flash card using your PC ( use any USB card reader matches the size), "FORMAT WITH FAT OPTION ONLY , DON'T FORMAT WITH FAT32 " and keep it connected to your PC for now.
3- prepare your PC to show all hidden files using "folder option " from your PC control panel, without this you will not be able to access the below in step 5>
4- run the EXE ROM file of Imate Rom on your PC but don't follow the steps on the screen , just keep it waiting for an action)
5- now browse your PC ( go to your windows Temp folder in the boot sector of your windows " Example C:\Documents and Settings\Magdy\Local Settings\Temp"
6- Click your the right button of your mouse and chose ( arrange Icon by Modified )
7- go to the the last folder in the list and open it , you will find the following files inside that folder " CoolFlash_Comms.dll , GotoBL.exe, RUUShop.exe,WMIPL.DIP,WMUPDAT.DIP "
8- Mark the last two files "WMIPL.DIP,WMUPDAT.DIP" and copy them to your Flash Card , now you are ready to flash your mobile using your only flash card.
9- insert the flash card in your Imate PDAL , remove the Battery for 5 seconds and install it again .
10- now Press the two Bottons (Left button " above the green handset button" + Power Botton ) , the mobile will start flashing your mobile , after completion your mobile will restart automatically.
Enjoy
Hint: some other roms of Imate Pdal " Like the Chinese WM6 one " doesn't need the WMIPL.DIP file , it needs only the WMUPDAT.DIP to flash the device.
The above is safe and would not damage your Device but know that " NO DATA WOULD BE RECOVERED UNLESS YOU HAVE A BACKUP DATA FOR IT, THE DEVICE WILL BE AS FACTORY DEFAULT"
Hi Magdy, sorry for my english but i'm italian...
i bought a PDAL with english language (the seller said me that was italian ), so i would like to flash it in italian...how can i do? Is no problem to flashing, but i don't have any rom and I don't know hoe to retrieve it from the web...
In your experience, is possible to copy the italian rom from an italian PDAL (of my friend) to flash my pdal?
Is there a version of WM06 (also in english) avaiable?
thanks for all
1.download Romupdate v1.11? where?????????
Me too, where can i get this romupdater utility? and does it work with PDAL?
Thanks Magdy your procedure working fine
THANKS A LOT
For windows VISTA => C:\Users\YOUR ACOUNT\AppData\Local\Temp\is-KT0IV.tmp
Thanks for your post Magdy ! Works 100%
Greets from Romania !
Sorry for going off topic but my intentions are just to inform you guys that I just finished translating Chinese WM6 rom to English, I also added some packages and tweaked it to perform batter...
I made this rom for myself as I was unable to find and Eng WM6 rom for my PDAL and WM5 was out dated, but I also wanted to share it with you guys so that you can also enjoy using English WM6 on your PDAL devices.
So follow me.... PDAL_WM6_WWE_CellSmith.zip
dear magdi thanx alot working for me...
Well, we (Sorg and GreateVK) finished VGA ROM for ASUS P750.
Primary thread (on Russian)
http://asusmobile.ru/board/viewtopic.php?p=126563#126563
with Google translator:
http://translate.google.com/transla...?p=126563#126563&langpair=ru|en&hl=ru&ie=UTF8
Heya! Thanks for the work on the VGA rom! I tried to load it into my P750, unfortunately I'm getting the following error message:
Boot : Checksum error!
Update fail!
Not sure what's up with this but I was able to install your WM 6.1 rom perfectly. Anyone else having the same trouble?
Use original USB-cable. From MicroSD it's impossible to load VGA into P750
Oh, so I can just copy the nb0 file into the main phone memory? Is there a specific directory I need to copy the file to?
I've been installing roms via microsd card in the past, didn't know I can't do the same with the VGA rom.
Voice command botton does not active P750
Hi Sorg, GreateVK,
Last time before update cook rom v0.09, I can use voice command botton press force mode. Now it does not work. Other way auto run cab fr sdcard does not also. Do we have other way to downgrade or clear it. pls advice.
Thx, F
You flash it as all other cooked roms from the SD-card and force bootloader.
The v1.02 has a big time issue with memory leak, starts with 25 MB, but at the end of the day under 10 MB without any programs running...
Does this rom have a vga wireless manager?
I'm trying to find one to port to the E-ten x800 as the wireless manager from E-ten is pretty bad.
NO its the same one from WM6.0 but it is okay
Joost39 said:
You flash it as all other cooked roms from the SD-card and force bootloader.
Click to expand...
Click to collapse
Is there a topic where this is explained ? Would like to try VGA Rom but need to backup existing ROM first !
Hi Joost,
Thx for your advice,
--------------------
You flash it as all other cooked roms from the SD-card and force bootloader.
Is there a topic where this is explained ? Would like to try VGA Rom but need to backup existing ROM first
------------------------
1. How to flash fr sdcard? which rom version nbo, cab? where i can load?
2. I'm quite sure force bootloader cannot do it, Coz voice command does not active (voice command + slide power upward + joystick downward + reset)
3. VGA rom is nbo or cab file, the way to do as item 1 or not.
Pls advice,
Thx, F
Is this rom in english or russian language? can u please post how to flash the new rom in or a link to instructions please ? tnx
daraj said:
Is this rom in english or russian language? can u please post how to flash the new rom in or a link to instructions please ? tnx
Click to expand...
Click to collapse
Yes, it's in english!
Just copy the ROM file on the root of your sd card, plug the usb power (cable or power adapter) then hold the voice command button + hold power button upward + hold joystick downward + reset with the stylus
A bit difficult but not impossible
Thanks, do you know of a way to back up the existing ROM first to go back to it ?
GpsPasSion said:
Thanks, do you know of a way to back up the existing ROM first to go back to it ?
Click to expand...
Click to collapse
Very good question.
Ftogether said:
Thx for your advice,
--------------------
You flash it as all other cooked roms from the SD-card and force bootloader.
Is there a topic where this is explained ? Would like to try VGA Rom but need to backup existing ROM first
------------------------
1. How to flash fr sdcard? which rom version nbo, cab? where i can load?
2. I'm quite sure force bootloader cannot do it, Coz voice command does not active (voice command + slide power upward + joystick downward + reset)
3. VGA rom is nbo or cab file, the way to do as item 1 or not.
Pls advice,
Thx, F
Click to expand...
Click to collapse
Flash from the SD-card:
Org. roms: cap-file
Boot Loader Force Flash:
Plug into Charger (or Computer), Press the Record Button in and the Joystick UP and the Power/Hold Slider upwards and hold these three in Position and then press the Reset Button to start the Flash
Modded roms: nb0-file
Boot Loader Force Flash:
Plug into Charger (or Computer), Press the Record Button in and the Joystick down and the Power/Hold Slider upwards and hold these three in Position and then press the Reset Button to start the Flash
To backup your own rom you need to dump the rom- difficult:
But all the original roms are on the ASUS site!
ftp://ftp.asus.com/pub/ASUS/Mobile_Phone/P750/
Just download the correct one and reflash the phone.
mentox said:
Yes, it's in english!
Just copy the ROM file on the root of your sd card, plug the usb power (cable or power adapter) then hold the voice command button + hold power button upward + hold joystick downward + reset with the stylus
A bit difficult but not impossible
Click to expand...
Click to collapse
Now, here is how you do it
You start with p750 horizontally before you, the screen to the left, numpad to the left.
1. take the stylus into your mouth, locate the reset hole and slip it into it (do not push it yet).
2. left hand: hold the joystick down.
3. right hand: press voice record button and with the thumb slide the power button.
4. immediatelly push the stylus with your tongue and hold the whole combination for a second or two.
Joost: which one is the right one on ASUS ftp? I mean the qvga, English.
Take the Singapore one WWE SG !!
Anyone seen the French ROM on their FTP ?
Hi Joost,
Thx for yr time, finally my H/W voice command does not active. Now change MB can do everything. So far i test vga rom v.1.0 it's pretty display, memory too low, CPU slow down.
thx, F
Do the VGA Rom's available put the phone in VGA mode permanently or do you have the option to switch between VGA and QVGA?
I saw the thread on this forum about the VGA ROM for the P750...
Unfortunately I am not an expert at all and perhaps maybe not the right place here for me to ask but here it goes,
Can I easily install and remove the ROM in case the the VGA patch starts bugging? and how do you install the ROM, is there are step by step manual floating around?
any feedback greatly appreciated!
bras
Hi, I did install the VGA ROM vers. 1.02 by Sorg & GreatVK and also tried the 0.17 by Sorg.
I didn't link the dual-mode keyboard (RUS-US) of the 0.17 and I think it has a higher memmory comsumition. So, I prefered the 1.02.
The 1.02 is stable, and the only problem I noticed is about the Live Messenger that do not works. The VGA screen is realy better!!!
If you do not like, you can install other dumped ROM or one of those you can find at asus website.
To install de Dumped: put the .nb0 file on a microSD (not HC) and press voice memo + down + power + reset.
To install de Shipped: put the .cap file on a microSD (not HC) and press voice memo + up + power + reset.
Here both methods works finte.
:hth:
[ ]'s
Bruno Leony
ok thanks alot
with dumped you mean the Sorg & greatVK rom and with shipped you mean the original Asus Rom?
you don t need to back up the original Asus ROM?
bras4real said:
with dumped you mean the Sorg & greatVK rom and with shipped you mean the original Asus Rom?
Click to expand...
Click to collapse
Yes
bras4real said:
you don t need to back up the original Asus ROM?
Click to expand...
Click to collapse
Depends, if your ROM is avaiable at Asus site you dont. Mine was WWE UK, there has just WWE SG, TH and MS at asus site. I restored my to SG with no broblems, just did the forced mode 1st and after coud do the normal one.
Wich ROM is currenty on your device (settings/ system / system information / version)?
I am running the VGA 0.17 Base and am very happy with it, only the Keybaord Thing drives me crazy and CoolCamera is a bit crappy......... But once you have seen the VGA, believe me you dont want to go back to QVGA. Also WM6.1 more stable in my Opinion than WM6.0 and few nice Things like a real Taskmanager......... attached a screenshot !!
I am using ROM version 4.8.4 NLD_NL00? is that for the Netherlands?
To install de Dumped: put the .nb0 file on a microSD (not HC) and press voice memo + down + power + reset........................
how hard can this be?
I installed 1.02 by Sorg & GreatVK file but when I (try) to press all 4 buttons above a screen comes up saying
Flashrom Update.....
IPL: iplPegP_4H3
but nothing really happens
what s going wrong? how u press all these buttons together?
Right Hand on Voice Button and Slider, left hand on J/Stick Press Reset w Stylus using your mouth....... Remember when flashing from SD Card only plug-in Cable after this...
Also for Cap File J/stick up and for nbo File J/stick up.....
sorry for this long message but I need to get this device running VGA along with another 3 collagues who will be operating the same device
to flash ROM/install the VGA patch ::
On the Asus mobile club it is explained as:
The way the first - with MicroSD card
1)take (preferably clean, just formatted) MicroSD card no more than 2GB (MiniSDHC PODOYDET NOT!) And copy it, the root, file PegasusP.nb0
2) present the card into the phone, the phone or connect to a computer or to power supply.
3)joystick down and slide the button to switch off the top Hold these buttons in a position to release and push briefly reset (now come in such rastopyrku ASUS!).We continue to hold the button until butbloka server It shall commence proceedings firmware
ok so installing the root folder which is thiS? My MicroSD folder is completely empty and how do I know it s not HC?
for the record, the joystick button needs to pressed down or up? manual above says down, you say up!
thanks for yr help
it seems to work now to some extent
in the boot menu it says ' PEGASUS NBO not found'
I checked in mobile explorer, the file is sitting there..
coulld it not work because my p750 is running on a Dutch ROM??? (the WM language is Dutch witch is not changeable it seems)
Copy The File PegasuP.nb0 to the just formatted Card, remember you must format FAT16 !! and then it should find it.......
Oh the the Card will say HC on it if it is !! To flash to another Asus OEM Rom (like WWE English) put the AsusP750.cap File on the Card and do the same Procedure only push the Joystick UP, then it will ask to be plugged into either USB or Charger Cable, after you do this the Boot will start. Then extract the the whole OEM Firmware onto the Card and upgrade again.
Alternate ways to load "PegasusP.nb0" ROMS
Hi all, just want to post something I found on this particular forum. Would help in loading of "PegasusP.nb0"
3 different ways to load the ROMs.
http://asusmobile.net/board/viewtopic.php?t=83
The USBLoader file can be found here
http://www.mediafire.com/?fa9a9vp2knb
Var.1 – Using MicroSD
1. Format your MicroSD card (max. capacity 2 Gb! NOT SDHC) and copy PegasusP.nb0 on it
2. Plug in you MicroSD card into smartphone and connect in to PC or plug in power adapter
3. Press and hold VoiceCommander button + joystick down + PowerButton up and press Reset once but keep on holding the buttons untill you see bootloader screen. Then it starts uploading new firmware
4. Smartphone will reboot and that`s it!
Var.2 for XP users!
1) Go to ActiveSync settings and check out (disable) USB cable connection
2) Perss and hold VioceCommander button + Power button up. Press Reset once but keep on holding the buttons untill you see bootloader screen.
3) Smatphone will turn on the bootloader mode throu USB
4) Connect P750 to PC and wait till PC will install drivers
5) start using command line: USBLoader.exe PegasusP.nb0
6) You can see the updating process both on PC and PDA
7) After it is done press Reset
Var.2 for Vista users!
1) 1. Perss and hold VioceCommander button + Power button up. Press Reset once but keep on holding the buttons untill you see bootloader screen.
2) Smatphone will turn on the bootloader mode throu USB
3) Go to Devices Explorer and find your PDA in: Mobile Devices -> Asus USB Sync. Unstall SPECIFIC driver with you can find in downloaded archive in USBAS folder. Make sure that you install THIS PARTICULAR driver
4) start using command line: USBLoader.exe PegasusP.nb0
5) You can see the updating process both on PC and PDA
6) After it is done press Reset
Click to expand...
Click to collapse
Hi All,
Will the above describe procedure force-load a ROM that is from a different region than the original ROM? There are some new 6.1 WWE ROMs on the ASUS website, but I can't get them to load since my phone is not from any of the regions available.
Has anyone tried the new ROMs? Any recommendations?
Dan
Dan.S said:
Hi All,
Will the above describe procedure force-load a ROM that is from a different region than the original ROM? There are some new 6.1 WWE ROMs on the ASUS website, but I can't get them to load since my phone is not from any of the regions available.
Has anyone tried the new ROMs? Any recommendations?
Dan
Click to expand...
Click to collapse
Yes it will force it to flash whatever region your device is from. As always use at your own risk.
P750
Hi All,anyone know how to disable the message instance reply after upgrade to wm 6.2 and also is there any smartdial with this ASUS p750 3g ppc.thanks
asus p 750 update error
hi guy's my asus p750 won't update just come at the update screen-sd download and standing they wont 2 finish pls help
thanks.....
Hay i have htc touch diamond how to uptade wm 6.1 to 6.5 ? I try to connect wia active sicron. But cannot uptade
[link 1], [link 2]
Link 1 is the same thing with link 2.
Tanks on fasst answer i got 4 colors screen , red ,yelow , blue ,white on top writte diam100 64m spl-1.37 i pressing power button nothing happening ,help . I new one here
Connect your diamond to PC as a disk drive (mass storage) and copy your ROM to Internal Storage. Make sure it`s name is "DIAMIMG.nbh" (*.nbh is the extension, make sure it is only once, not like this: "DIAMIMG.nbh.nbh" ) and than hit the reset button and hold vol down + back key. After update make a hard reset, hit the reset button and hold vol down + center key and follow the instructions on the screen (vol up to format only phone memory).
I hope you understood.
Good luck!
This part is ok now writte "trigger usb host " noting happend but i clean f disk ( memory internay ) only left image file how to run update ?
So... put "DIAMIMG.nbh" into Internal Storage (root). Unplug you diamond from PC, hit the reset button, and hold vol down + back key, press power key, wait for update to complete.
thecrazyman64 said:
So... put "DIAMIMG.nbh" into Internal Storage (root). Unplug you diamond from PC, hit the reset button, and hold vol down + center, press power key, wait for update to complete.
Click to expand...
Click to collapse
Vol down + the back button
i did do this go info no image file i have version 1.37 what rom i must use ?Even to update windows to 6.5 english
Tajanstveni said:
i did do this go info no image file i have version 1.37 what rom i must use ?Even to update windows to 6.5 english
Click to expand...
Click to collapse
Just going by my Diamond and what you said in a previous post, it should say (quoting my diamond) "SPL-1.24. Hard"
You can't flash custom ROMs with a stock SPL.
Link for HSPL is in here, read along with it.
I tray to download renamed it put in root but when start loading file mising image file writte why?
Tajanstveni said:
Hay i have htc touch diamond how to uptade wm 6.1 to 6.5 ? I try to connect wia active sicron. But cannot uptade
Click to expand...
Click to collapse
please read this - http://forum.xda-developers.com/showpost.php?p=2508373&postcount=1
its one of the basic things we do... and you will get most of answers here...
this is 3rd topic on the forum for diamond - http://forum.xda-developers.com/forumdisplay.php?f=430
you can see other useful posts as well.... MTTY is highly recommended when you flash new rom to diamond...
Tanks for asnswer fast but problem is that i cannot conect device with pc when i start diamond ruu program later i get error 224 What i need some drivers for reconect to pc? I use microsoft active sycn 4.5 but i cannot coneect completly come message on display . Exist another method to connect touch diamond to pc ?
After factory default reset and format internal storage now is problem when i try to start rom uptadte from internal storage writte "loading ...." i wait more that 10 min nothing happend only loading.... where is the pronlem
Tajanstveni said:
After factory default reset and format internal storage now is problem when i try to start rom uptadte from internal storage writte "loading ...." i wait more that 10 min nothing happend only loading.... where is the pronlem
Click to expand...
Click to collapse
If you can connect to activesync (should be possible, since you are back to original),
use the customRUU method. At least that should give an idea of where the process is getting wrong, plus will allow recovery.
HTH...
Same Problem?
Tajanstveni said:
Hay i have a problem wih htc touch diamond when i tray to connect to pc with active sync 4.5 said that device cannot be sicnoized completly and i cannot update costum rom come error 224 device not found ,can anibody help me ?
Click to expand...
Click to collapse
Looks like you created a new thread for the same problem...
http://forum.xda-developers.com/showthread.php?t=643159
Sorry for my mistake but probolem solved ,tanks for help