I just bought a o2 xda 2s on ebay.
I was wanting a pocket pc phone that i could hook up to a serial port device I use at work.
The phone works great so far but when i installed the program i use at work everytime i try to load a file it freeze's while trying to load file. I have used this program on HP pda's with not 1 issue. Just wanted to have a all in 1 handheld unit.
Currently this is what I have:
Model: ph20b Pocket PC
wm2003se
version 4.21.1088 (build 15045.2.6.0)
rom version 1.40.00 WWE
rom date 3/10/05
radio version 1.12.00
protocol version 1337.42
ext. rom version 1.40.242 WWE
What would make it freeze like it does, only with this program, and can i upgrade to wm5 (how?). Are there any other upgrades you know would make it more stable a fix the freezing issue?
This is the first pocket pc phone i have had so i have no idea as to what,where and how to start fixing.
Thanks for any help you guys may provide!!!!
For WM5 look here http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home my signature shows what Rom I use. I find it good. I don't what could be causing the freezing. What is the program?
Here is a link to software im using.
http://www.racetech.com/SubMenu.asp?cMenu=11&c=Yes&cSubMenu=92&showPage=da
I have read the info on ba wm5 rom and still dont know how to install. i use a pc to check email and thats it, so im a little new to this stuff.
Can someone help step-by-step me through this a little
do i need a sd card as i don't have one. to update to wm5
The phone is new and i dont' have any data on it that i need.
Thanks Guys
I have downloaded the following file on my PC Desktop.
Helmi_wm2k5_aku3.2_32mb (rar file)
I extrexcted it in its own new file and now have the following files.
1)extrom
2)AddOn
3)ph20b
4)ph20b1
5)wm2k5_aku3.2_32mb_v1.3.2
6)Helmi_aku3.2_v1.3.2.txt
what next?
Yes you would need a SD card you can get a 1gb really cheap on ebay and then you can store programs etc on it.
Well I must confess I haven't done it I bought mine of ebay with WM5 on it already. The fellow I bought mine off will upgrade other units for $150 AUS I think. If you aren't in Aus he still would proberly do it.
i got wm5 in an exe file from www.buzzdev.net i think and all i had to do was put my xda 2s in boot loader mode stick it in its cradle and run the file easy peasy
you DO - NOT need an SD card (i did it , i dont have one)
here is the guide to install
http://wiki.xda-developers.com/index.php?pagename=Helmi
i DID NOT DO THE OPTIONAL INTERNAL MEMORY BIT
Copy the nk.nbf file to folder that match ur device (PH20B/PH20B1)
* Determine your operator Information e.g.: "T-MOB101", or "Vodafone", or O2. See GetDeviceData.
* Open a command prompt, (open "run", type cmd , press enter), go to the folder where the ROM(nk.nbf) file resides (mine is c C:\Documents and Settings\Administrator\Desktop\pda\oprade\Helmi\PH20B - notice the c is the command) and execute: SetOperator ??? (where ??? is your operator , mine was SetOperator ORANG001)
# Put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button
# Connect the phone to the sync cable/cradle.
# Now you can upgrade the ROM using BaUpgradeUt.exe(i used this one) / MaUpgradeUt_noID.exe
#
When the upgrade is completed, you must perform a Hard Reset
1.
Press and hold the "Power" button, and then press the Reset Button. Colored stripes (the bootscreen) will appear on the screen.
*
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
o Quickly press "Record" & "Camera" before the versions appear at bottom right
o OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
*
If you have a PH20B1 device such as SX66:
o Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
o OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
2.
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
* If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
* If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
3. Press the "Mail" button. A white screen will show for a while, while it is clearing your device in preparation for the new ROM to start executing
4. When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly ...
once done copy what you need (i installed all the fixes etc) from the extrom folder to your ppc and run them to install them (once done delete the cabs)
*note doing this way you will need to setup your gprs and mms settings for your network*
Ok I'm going crazy. Where in the heck do I find setoperator.bat??
Thanks
Related
I ask the help and a pardon for English. A problem such, I have opened the Extended ROM 1.40.176 and have removed from there all patches, a post of it{this} by means of program Repart DOC have made 128êb. After that at me storage became 60 Mb. The pleasure last not long as after SR storage was gone)) HR and reinstallation rom do not help{assist} . 2003 Win about 3 % are put and there is a mistake{an error} 113. WM5 patch3 is put but system multi-coloured strips are not loaded, show only. At me i-mate PDA2K.[/b]
[EDIT] OOPS double post 8)
WOW, your english was hard to understand, but there int he end, first time i installed the first version of WM5 for BA i resized my ExtRom , after i downgraded back to 2003se, i had the same problem, i cant quite remember what you need to do, but you need to use that repart.doc tool again and resize the ExtRom again big enough!.
without doing this your ext rom is not big enough to hold the cab files so you need to resize to bigger size storage space.
ill have a look for the size you need to do it.
but have a look on the wiki in the blue angel section, you will find all answers to your questions.... 8)
Below is how to Downgrade a WM5 Rom to the Latest Offical Rom (Currenty 1.42)the part you need to take note of is the highlighted bold on how to format the Ext Rom.
Downgrade Instructions
* First please save all your data, cause you will lose everything!
1.
Locate the Downgrade software
* If you followed the Wiki instructions you will find the files in "??Your_DIR??\Downgrade to WM2003SE" folder.
* Else Download the BA WM5 Downgrade pack.
* Unrar (UnZip) it with WinRar.
2.
Download your favorite WM2003SE ROM
* Download rom from Available Original Shipped ROM Versions
* Extract the files (Unrar / Unzip) from the downloaded *.exe
* Copy nk.nbf from the 2003SE ROM to the "??Your_DIR??\Downgrade to WM2003SE" folder.
3.
Prep your WM5 device by formating Storage and Hive.
*
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
o Quickly press Record+Camera before the versions appears at bottom right
o OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
o Quickly press Record+Windows Media before the versions appears at bottom right
o OR, press Power+Softreset+Windows Media Player button+Record at the same time.
* Either way mentioned above should work.
*
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
o You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
o You can do that with the Windows Media Player and the record buttons.
* If you are done, press the mail button, it'll show a white screen for a while, just wait.
* If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
* The welcome screen to set up your device should appear soon.
4.
Setup your device
* Follow the instructions on the screen.
5.
Stop activesync.
* Right click on taskbar -> Task Manager.
* End the following processes: rapimgr.exe, outlook.exe, winword.exe, wcescomm.exe, wcesmgr.exe
6.
Put your device into bootloader mode.
* Press Power + record (above the volume slider) + softreset at the same time.
* You should see a white screen with "Serial" text on it and the Bootloader version.
* Put your device into the cradle
* Make sure that the charger of your PDA is connected to the cradle.
* The text should change to "USB" now.
7.
Run the Downgrade
* Change to the "??Your_DIR??\Downgrade to WM2003SE" folder.
* Run the MaUpgradeUt__NoId.exe.
* It should recognize your device in 10-15 seconds.
* You'll see the new ROM version that you have chosen.
* Press next
* The downgrade process should begin in a few moments. It'll take about 10 minutes.
8.
Setup your device
* Follow the instructions on the screen.
9.
Setup Activesync Partnership on your PC.
* Put your device into the cradle
* Pair and but don't sync your device.
10.
Evaluate if you need an Extended_Rom on your CE2003
* IF you have NOT resized your Extended_ROM on the upgrade to WM5 and had 43MB Storage go to B) or C)
*
IF you will not be needing the Extended_Rom on your SE2003 as you install the cabs by hand and would like to use that space as storage then go to D)
A) Creating a Exteneded_Rom (16MB Default)
o If you did resize your storage and had over 43MB (60 was default) on your WM5 Device
o You will need to create a Extended Rom that is at least 16MB
o This will fit any Exteneded roms (ms.nbf) that you would like to flash back or any coooked versions.
o You will have your Extended_ROM back, however it will be seen forever
(You can not lock it once you've unlocked and resized it cause the resizing tool resets the Extended_ROM password.)
o Copy Repart_DOC.exe from the "Preparation\DOC repartitioning tool" folder to your device and launch it.
o Set size to 16348 (should this be 16384?? 16*1024=16384)
o Press "Format now!" and wait until it is done (A few seconds). You will see a message that it is done.
o Soft reset.
o Choose option B) or C)
B) Flashing back the Extended Rom
o Copy ms_.nbf to the "Downgrade to WM2003SE" folder (you Must delete nk.nbf)
o Now, repeat steps 5-7.
o Skip the rest, go to 11
C) Copying a cooked version of the Extended Rom (Custom Files)
o Copy the Cooked Cabs to the Extended_Rom folder on your device
o Insure that you have the correct version autorun.exe and config.txt
o Soft reset
o Skip the rest, go to 11
D) Using the Extended rom as storage space.
o If you want to use the Extended_ROM space as added storage space on your CE2003
o Copy Repart_DOC.exe from the "Preparation\DOC repartitioning tool" folder to your device and launch it.
o Set size to ??
o Press "Format now!" and wait until it is done (A few seconds). You will see a message that it is done.
o Soft reset.
11.
Test the device
* Check the phone.
* Check your Regional settings.
* Check the time.
12.
Setup Activesync Partnership on your PC.
* Put your device into the cradle
* Pair and but don't sync your device.
13.
Reload applications
* Reload all your applications.
* Sync your data from outlook.
Thanks!!!!!!!!!!!!!!!!!!!!!!
joey jojo said:
Below is how to Downgrade a WM5 Rom to the Latest Offical Rom (Currenty 1.42)the part you need to take note of is the highlighted bold on how to format the Ext Rom.
Downgrade Instructions
* First please save all your data, cause you will lose everything!
3.
Prep your WM5 device by formating Storage and Hive.
*
........
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
o You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
o You can do that with the Windows Media Player and the record buttons.
* If you are done, press the mail button, it'll show a white screen for a while, just wait.
.
Click to expand...
Click to collapse
I have the same problem with my XDAII. After I set up the no-Yes-Yes, I can't find the mail button. Actually, I tried every button and none works.
Can you tell me how to do this?
Thanks!
Cant find the mail button?
XDA II is not Blue Angel or BA... there's some instructions here about that Andes(XDAII)/Himalaya.
Hi all,
Not sure if this is the right place to ask but I am stuck at a dead end.
tried to upgrade PDAL ROM to 3.0 (from 2.01)
Got a blue i-mate screen never went out of it.
tried all the hardreset tricks, no use.
tried to reinstall RUU with activesync, no use.
What else can be done?
for example, would it be possible to delete the ROM totally and reinstall it? how?
Appreciate your comments
regards
sy
I have the same problem
Would anybody be able to help, please reply to us. Thanks!
I've just spoken to the customer service from i-Mate. This issue can only be resolved by their service centre. So, no any simple solution so far.
Please be aware when you want to upgrade it.
my device is in service center for 7 days and they could not come up with a solution. I hope it is because they did not start working on it yet
1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
hi
wher i can find the Romupdate with arabic or without
and
how i can hard resit from the key not from system
th
Don't think mtty will work as PDAl is not an HTC device..
dear gun
thanks for your info but i want to ask you a Quastion from where i can get the driver for pdal in bootmode (rndis omap730)
thank you
PDAL Problem
I too am facing the same problem with my PDAL. I upgraded the rom version and now am just getting the initial blue screen with the imate details. Please help in solving this as i just cant seem to be going forward. Any ideas how to get the device booted up and working .
response to the above two question
1. How to enter Bootloader in PDAL?
I inquired the service people and was told it can be done by pressing power button and left soft key simuteneously and tap the reset hole. I have tried and it did work.
2. Any solution for not passing the welcome screen?
It seems there isn't any solution, other than sending to their service centre. It will take a long time. My phone has been there over 2 weeks but I was told they are still awaiting part. I guess they will replace the main board.
3. PDAL isn't HTC device?
I think it is. The code with HTC should be Pean. The service centre also listed it as HTC device. But I am not sure if MTTY can work.
How to enter Bootloader in PDAL?
my phone alwys login blu scren then restart
Im pressing power button + left soft key and tap the reset hole but not wok in Bootloader !!!
Flashing your Imate PDAL
Dear All,
I Have enough experience of Imate PDAL , It's too simple , just follow the steps below:
1- got any ROM version from Imate website "www.clubimate.com"
2- Format your Imate flash card using your PC ( use any USB card reader matches the size), "FORMAT WITH FAT OPTION ONLY , DON'T FORMAT WITH FAT32 " and keep it connected to your PC for now.
3- prepare your PC to show all hidden files using "folder option " from your PC control panel, without this you will not be able to access the below in step 5>
4- run the EXE ROM file of Imate Rom on your PC but don't follow the steps on the screen , just keep it waiting for an action)
5- now browse your PC ( go to your windows Temp folder in the boot sector of your windows " Example C:\Documents and Settings\Magdy\Local Settings\Temp"
6- Click your the right button of your mouse and chose ( arrange Icon by Modified )
7- go to the the last folder in the list and open it , you will find the following files inside that folder " CoolFlash_Comms.dll , GotoBL.exe, RUUShop.exe,WMIPL.DIP,WMUPDAT.DIP "
8- Mark the last two files "WMIPL.DIP,WMUPDAT.DIP" and copy them to your Flash Card , now you are ready to flash your mobile using your only flash card.
9- insert the flash card in your Imate PDAL , remove the Battery for 5 seconds and install it again .
10- now Press the two Bottons (Left button " above the green handset button" + Power Botton ) , the mobile will start flashing your mobile , after completion your mobile will restart automatically.
Enjoy
Hint: some other roms of Imate Pdal " Like the Chinese WM6 one " doesn't need the WMIPL.DIP file , it needs only the WMUPDAT.DIP to flash the device.
The above is safe and would not damage your Device but know that " NO DATA WOULD BE RECOVERED UNLESS YOU HAVE A BACKUP DATA FOR IT, THE DEVICE WILL BE AS FACTORY DEFAULT"
Hi Magdy, sorry for my english but i'm italian...
i bought a PDAL with english language (the seller said me that was italian ), so i would like to flash it in italian...how can i do? Is no problem to flashing, but i don't have any rom and I don't know hoe to retrieve it from the web...
In your experience, is possible to copy the italian rom from an italian PDAL (of my friend) to flash my pdal?
Is there a version of WM06 (also in english) avaiable?
thanks for all
1.download Romupdate v1.11? where?????????
Me too, where can i get this romupdater utility? and does it work with PDAL?
Thanks Magdy your procedure working fine
THANKS A LOT
For windows VISTA => C:\Users\YOUR ACOUNT\AppData\Local\Temp\is-KT0IV.tmp
Thanks for your post Magdy ! Works 100%
Greets from Romania !
Sorry for going off topic but my intentions are just to inform you guys that I just finished translating Chinese WM6 rom to English, I also added some packages and tweaked it to perform batter...
I made this rom for myself as I was unable to find and Eng WM6 rom for my PDAL and WM5 was out dated, but I also wanted to share it with you guys so that you can also enjoy using English WM6 on your PDAL devices.
So follow me.... PDAL_WM6_WWE_CellSmith.zip
dear magdi thanx alot working for me...
These steps SHOULD unbrick/flash a ROM onto an XDA Orbit. (Only tested on a UK O2 Orbit as this is the only hardware I have)
Step by step:- (works for me. No promises. So far only on a Windows XP machine)
1. Hard reset phone (press and hold two buttons with white lines next to red and green button while pressing reset with stylus. When text appears on screen, release all buttons, read text and if OK press "send" key. This means the GREEN call key. Screen will show FAT formatted etc.)
2. When phone starts to boot back up press and hold TOP LEFT button (speech dial) while pressing reset to enter bootloader mode (screen changes to 3 colour, red green and blue bands.
3. With PC running (XP only for now) connect USB cable to phone. Windows will conect to phone but Activesync will not show as phone is not running Windows at this point (Bootloader only remember!)
4. Run the ORIGINAL ROM file for your handset. If German phone run GERMAN ROM, if UK phone run UK ROM. This should restore the handset back to its factory settings with WM5 running.
5. If you want to upgrade to WM6 I suggest you unlock phone using imei-check first. Easier to fix later on if something goes wrong. Costs about £28 I think.
6. Download and run USPL program by unpacking and clicking on "start_uspl.exe" NOT by running UpgradeROMUtility.exe. If USPL is successful, which it usually is, when the phone restarts pay attention to the RED number that appear on the bootscreen. SPL should read 1.11.0000.
7. After phone is finished re-booting download and run a ROM of your choice. Should install OK, especially if phone is unlocked and USPL'd
Apparently you can flash any ROM by using only USPL. I have not tried this as I previously "bricked" my handset by NOT running USPL when I should have. Therefore I have only detailed the steps that I take to flash my phone if I need to restore from a bad flash.
So far it works for me.
XDA Orbit running B&B v3.7 (no problem)
I hope that this long winded message helps some people out. This website forum has helped me out, with my Orbit and my old Himalaya device. Time to return the favour.
I saw the thread on this forum about the VGA ROM for the P750...
Unfortunately I am not an expert at all and perhaps maybe not the right place here for me to ask but here it goes,
Can I easily install and remove the ROM in case the the VGA patch starts bugging? and how do you install the ROM, is there are step by step manual floating around?
any feedback greatly appreciated!
bras
Hi, I did install the VGA ROM vers. 1.02 by Sorg & GreatVK and also tried the 0.17 by Sorg.
I didn't link the dual-mode keyboard (RUS-US) of the 0.17 and I think it has a higher memmory comsumition. So, I prefered the 1.02.
The 1.02 is stable, and the only problem I noticed is about the Live Messenger that do not works. The VGA screen is realy better!!!
If you do not like, you can install other dumped ROM or one of those you can find at asus website.
To install de Dumped: put the .nb0 file on a microSD (not HC) and press voice memo + down + power + reset.
To install de Shipped: put the .cap file on a microSD (not HC) and press voice memo + up + power + reset.
Here both methods works finte.
:hth:
[ ]'s
Bruno Leony
ok thanks alot
with dumped you mean the Sorg & greatVK rom and with shipped you mean the original Asus Rom?
you don t need to back up the original Asus ROM?
bras4real said:
with dumped you mean the Sorg & greatVK rom and with shipped you mean the original Asus Rom?
Click to expand...
Click to collapse
Yes
bras4real said:
you don t need to back up the original Asus ROM?
Click to expand...
Click to collapse
Depends, if your ROM is avaiable at Asus site you dont. Mine was WWE UK, there has just WWE SG, TH and MS at asus site. I restored my to SG with no broblems, just did the forced mode 1st and after coud do the normal one.
Wich ROM is currenty on your device (settings/ system / system information / version)?
I am running the VGA 0.17 Base and am very happy with it, only the Keybaord Thing drives me crazy and CoolCamera is a bit crappy......... But once you have seen the VGA, believe me you dont want to go back to QVGA. Also WM6.1 more stable in my Opinion than WM6.0 and few nice Things like a real Taskmanager......... attached a screenshot !!
I am using ROM version 4.8.4 NLD_NL00? is that for the Netherlands?
To install de Dumped: put the .nb0 file on a microSD (not HC) and press voice memo + down + power + reset........................
how hard can this be?
I installed 1.02 by Sorg & GreatVK file but when I (try) to press all 4 buttons above a screen comes up saying
Flashrom Update.....
IPL: iplPegP_4H3
but nothing really happens
what s going wrong? how u press all these buttons together?
Right Hand on Voice Button and Slider, left hand on J/Stick Press Reset w Stylus using your mouth....... Remember when flashing from SD Card only plug-in Cable after this...
Also for Cap File J/stick up and for nbo File J/stick up.....
sorry for this long message but I need to get this device running VGA along with another 3 collagues who will be operating the same device
to flash ROM/install the VGA patch ::
On the Asus mobile club it is explained as:
The way the first - with MicroSD card
1)take (preferably clean, just formatted) MicroSD card no more than 2GB (MiniSDHC PODOYDET NOT!) And copy it, the root, file PegasusP.nb0
2) present the card into the phone, the phone or connect to a computer or to power supply.
3)joystick down and slide the button to switch off the top Hold these buttons in a position to release and push briefly reset (now come in such rastopyrku ASUS!).We continue to hold the button until butbloka server It shall commence proceedings firmware
ok so installing the root folder which is thiS? My MicroSD folder is completely empty and how do I know it s not HC?
for the record, the joystick button needs to pressed down or up? manual above says down, you say up!
thanks for yr help
it seems to work now to some extent
in the boot menu it says ' PEGASUS NBO not found'
I checked in mobile explorer, the file is sitting there..
coulld it not work because my p750 is running on a Dutch ROM??? (the WM language is Dutch witch is not changeable it seems)
Copy The File PegasuP.nb0 to the just formatted Card, remember you must format FAT16 !! and then it should find it.......
Oh the the Card will say HC on it if it is !! To flash to another Asus OEM Rom (like WWE English) put the AsusP750.cap File on the Card and do the same Procedure only push the Joystick UP, then it will ask to be plugged into either USB or Charger Cable, after you do this the Boot will start. Then extract the the whole OEM Firmware onto the Card and upgrade again.
Alternate ways to load "PegasusP.nb0" ROMS
Hi all, just want to post something I found on this particular forum. Would help in loading of "PegasusP.nb0"
3 different ways to load the ROMs.
http://asusmobile.net/board/viewtopic.php?t=83
The USBLoader file can be found here
http://www.mediafire.com/?fa9a9vp2knb
Var.1 – Using MicroSD
1. Format your MicroSD card (max. capacity 2 Gb! NOT SDHC) and copy PegasusP.nb0 on it
2. Plug in you MicroSD card into smartphone and connect in to PC or plug in power adapter
3. Press and hold VoiceCommander button + joystick down + PowerButton up and press Reset once but keep on holding the buttons untill you see bootloader screen. Then it starts uploading new firmware
4. Smartphone will reboot and that`s it!
Var.2 for XP users!
1) Go to ActiveSync settings and check out (disable) USB cable connection
2) Perss and hold VioceCommander button + Power button up. Press Reset once but keep on holding the buttons untill you see bootloader screen.
3) Smatphone will turn on the bootloader mode throu USB
4) Connect P750 to PC and wait till PC will install drivers
5) start using command line: USBLoader.exe PegasusP.nb0
6) You can see the updating process both on PC and PDA
7) After it is done press Reset
Var.2 for Vista users!
1) 1. Perss and hold VioceCommander button + Power button up. Press Reset once but keep on holding the buttons untill you see bootloader screen.
2) Smatphone will turn on the bootloader mode throu USB
3) Go to Devices Explorer and find your PDA in: Mobile Devices -> Asus USB Sync. Unstall SPECIFIC driver with you can find in downloaded archive in USBAS folder. Make sure that you install THIS PARTICULAR driver
4) start using command line: USBLoader.exe PegasusP.nb0
5) You can see the updating process both on PC and PDA
6) After it is done press Reset
Click to expand...
Click to collapse
Hi All,
Will the above describe procedure force-load a ROM that is from a different region than the original ROM? There are some new 6.1 WWE ROMs on the ASUS website, but I can't get them to load since my phone is not from any of the regions available.
Has anyone tried the new ROMs? Any recommendations?
Dan
Dan.S said:
Hi All,
Will the above describe procedure force-load a ROM that is from a different region than the original ROM? There are some new 6.1 WWE ROMs on the ASUS website, but I can't get them to load since my phone is not from any of the regions available.
Has anyone tried the new ROMs? Any recommendations?
Dan
Click to expand...
Click to collapse
Yes it will force it to flash whatever region your device is from. As always use at your own risk.
P750
Hi All,anyone know how to disable the message instance reply after upgrade to wm 6.2 and also is there any smartdial with this ASUS p750 3g ppc.thanks
asus p 750 update error
hi guy's my asus p750 won't update just come at the update screen-sd download and standing they wont 2 finish pls help
thanks.....
Hii all,
actually this my first post in the forum and i hope to find the solution to my small prob.
The problem is appearance some words on the jasjar screen like "usb" n "serial"
they doesn't disappear although i 'v done "reset" n "Power+reset+backlight"
They are permanently appear on the screen and make my jasjar as dead ..
----
actually i've open the rom upgrade icon from the mobile directly and i didn't use the pc at all because i didn't know how to upgrade it
----
please if someone know the solution of this prob. tell me >>
n i want to know how to upgrade the rom if i already downloaded it >>
Welcome to forums
have a read on my signature link and check for usb connection
Moving to upgrade section
Please orb or anyone can help >> ):
I want the software of the jasjar which come with the installtion cd ..
I tried to join the jasjar with the pc but there's a problem with the usb ..
Plese help me as my mobile now like dead body
Thanks In Advance ;
Hello,
First instal ActiveSync 4.5 in PC. - if not already installed
Code:
http://www.softwarepatch.com/windows/activesync.html
Then in settings in (ActiveSync) disable (NOT check): "allowed to connect to one of the following port" and "Allow connection to USB".
Perhaps the translation is correct. I use the CZ version. But it's second and third check box.
Now
This works for when the Universal is in Bootloader and Windows Mobile.
1. First download the ROM you want to install.
2. Extract it to a folder (use winar or other extraction software).
3. There will be up to 3 ROMs in the package: ms_.nbf (Extended ROM), nk.nbf (OS ROM), radio_.nbf (Radio ROM)
4. Delete those which you don't want to install. (If you just want to upgrade the radio rom for instance delete ms_.nbf and nk.nbf and leave radio_.nbf.)
5. Download UniversalRUU.zip
6. Extract it and copy into that folder the nbf files you want to install.
7. Enter BootLoader mode by pressing and holding the power button and backlight button whilst performing a reset with the stylus. And plug to PC. Wait few seconds.
8. Doubleclick ROMUpgradeUt.exe and follow the instructions
9. When the upgrade is finished pull out the USB cable from the Universal.
10. You will need to do a soft reset OR hard reset depending on the situation. (note: some say do a soft reset / others a hard reset .. possibly someone with more knowledge could correct me here, but until then it's best to investigate the matter for yourself on the forum.)
11. To do a hard reset (push the two menu buttons ("-") on the keyboard + the reset button at the same time (all of this three). Doing a hard reset will result in you losing all your installed apps and data so ensure you have a backup of everything first.) Everything should be fine from this time. You have to calibrate the screen and do some tutorial...
12. If after doing a hard reset you want your Universal not to install the extras from the Extended ROM wait untilsetup is complete and then do a softreset when the popup window appears (you have 3 seconds before it installs ExtendedROM)
For a long time I have not installed the new ROM. I remember so I proceeded as follows
Greetings
Svobi
Really I don't know how to thank u
Thread closed as problem got solved