Develop Bugs

Just upgraded to ATT 2003 rom... Need GPRS help

I have a T-mobile ppc phone. I have just upgraded to the new WM 2003 rom. What are the correct GPRS settings for this new rom?
Rom = a.30.09
Radio = R6.18.00
Thanks
Raymond

Ok here you go:
Select a modem:
Cellular Line (GPRS)
Next
Access Point:
internet2.voicestream.com
or
wap.voicestream.com
internet3.voicestream.com
Next
Leave them all blank.
User Name:
Password:
Domain:
Finish
HTH

Hi,
I flashed my UK o2 xda with the SD card method to 2003, but have gone back to 2002(autoconfig) for now as I didnt know the GPRS settings. Does anyone have them for UK O2 network as 2003 ran really well
thanks,
maltloaf

Shouldn't people LOOK before they leap? :roll:
MrDollyMaker

Imate PDA2k 'No Service' issue! Plz help!

Imate PDA2k
ROM Version: 1.40.00 WWE
Radio Version: 1.12.00
Protocol Version: 1337.42
ExtROM Version:1.22.162WWE
Hi guys, sometime my PDA2k cannot be registered to Vodafone Network, 'No service' would display and I cannot make any calls unless Hard reset the device, and everything just works fine after hard reset, Anyone here can help or met the same issue as me? Thanks.

Exactly the same problem - O2 in the UK.
I updated to the latest ROM from 02 and it cured the problem for about 24 hours, now I get the message:
Unable to read the setting from the network
Click to expand...
Click to collapse
Aaaaaaaaah!

I have just updated to latest version and 'No service' issue has gone ,, but met new problem is 'headphone silent' sometimes when make a call , I have to soft restart it to get my phone back

I cannot get mine going with a hard or soft boot and upgraded ROM from o2.
Have tried consumer and corporate install to no avail

Hi Newmate, have you had any recurrance of the "No service" problem since your ROM upgrade. I live in Trinidad and in certain locations I get "no service" on my PDA 2K but if I switch the SIM to another phone I get a strong sognal.
I have the same ROM versions that you do and my operator oalso operates in the 1800 band.
I am searching for a solution.

Caller ID

I have a problem with my BA, the name not showing up on my screen along with the number when a call comes in.
Will be waiting for the best solution for it....

only views, no replies
WAKE UP GUYS!

what version roms are you using and have you changed any software since the last time caller id worked

yeah!
before it was windows 2003, later on upgraded to windows mobile 2005. Device information is:
ROM version: 5.03.02 WWE
ROM date: 03/02/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version: -
moreover, my wifi was working before. Now only showing the wireless icon but not starting up. I guess, maybe a driver problem. Please, help me out with this as well

You've probably got the caller's number in your address book twice, so it doesn't know which contact to display?

nope!
nothing is like that afterall, i am also a bit genius actually any other idea regarding wifi, i guess i need a suitable wireless driver for my version. What you guys think

well...first of all...you should upgrade the radio to 1.15.00...pro secundo...there is a fix for caller id on ftp (anyway newest Helmi rom handles with this issue)...then discuss it again...

i think i had the same prob with wifi not sure about caller id ,didnt get any calls and the gps would'nt connect (bluetooth).i looked through the site and upgraded further last friday, (cant find link now will post if i find it)
mine is a 2yr old 02 xda iis PH20b was 2003 now wm5
operator version AKU2.6
ROM version: 5.04.06 WWE
ROM date: 03/02/05
Radio version: 1.13.00
Protocol version: 1337.42
ExtROM version: Helmi v1.1
caller id , wifi & bluetooth all work fine
(added) the only thing i cant seem to set is the lock-out, on 2003 i could set it so after a set time it would log out so the password had to be entered,at the moment i only need the password after a soft reset,

nyuszi said:
well...first of all...you should upgrade the radio to 1.15.00...pro secundo...there is a fix for caller id on ftp (anyway newest Helmi rom handles with this issue)...then discuss it again...
Click to expand...
Click to collapse
dude, where can i get that radio version from, any link?
thank you anyways!

moosethebiker said:
i think i had the same prob with wifi not sure about caller id ,didnt get any calls and the gps would'nt connect (bluetooth).i looked through the site and upgraded further last friday, (cant find link now will post if i find it)
mine is a 2yr old 02 xda iis PH20b was 2003 now wm5
operator version AKU2.6
ROM version: 5.04.06 WWE
ROM date: 03/02/05
Radio version: 1.13.00
Protocol version: 1337.42
ExtROM version: Helmi v1.1
caller id , wifi & bluetooth all work fine
(added) the only thing i cant seem to set is the lock-out, on 2003 i could set it so after a set time it would log out so the password had to be entered,at the moment i only need the password after a soft reset,
Click to expand...
Click to collapse
dude, try to find that link as soon as possible!
regarding your problem, why dont you try going to settings > password and set a password out there!

yeh found the password cheers start/system/lock, now last time i went in i thought that was the only page so i clicked ok and came out this time i re-entered the password then it gave me a second page to change the time.
i found the radio upgrade
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
and the main page for helmi latest upgrade (wm5)
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home

browse wiki...its useful anyway...

everything was about to run fine suddenly after upgrading Radio Version and Helmi Version, now i neither even access the contacts nor the wifi is working NOW NO UPGRADING! any patch?

GPRS / Exchange ActiveSync stops syncing

Since I got my Exec I've been having problems with GPRS seeming to get 'stuck' connected but not transferring data. After a couple of hours following a reset ActiveSync will sit there with the "Sychronizing folders.." message in Outlook for quite a while and then fail. I guess the connection is no longer there, despite WM thinking it is. As a result the DirectPush email is nearly useless and I have to keep resetting the device.
At first I thought it was related to AKU 2.0, so I upgrade to Helmi AKU 3.3 and now AKU 3.5, both of which also have the same issue.
Here is my device info:
OS: 5.1.342 (Build 15698.3.5.0)
ROM version: 2.50.00 WWE
ROM date: 09/20/06
Radio version: 1.09.00
Protocol version: 42.42.P8
ExtROM version: 1.30.162 WWE
Has anyone else seen this issue? Or more importantly, what ROM are you using that doesn't have this issue??
Many thanks.

PaulMdx said:
Since I got my Exec I've been having problems with GPRS seeming to get 'stuck' connected but not transferring data. After a couple of hours following a reset ActiveSync will sit there with the "Sychronizing folders.." message in Outlook for quite a while and then fail. I guess the connection is no longer there, despite WM thinking it is. As a result the DirectPush email is nearly useless and I have to keep resetting the device.
At first I thought it was related to AKU 2.0, so I upgrade to Helmi AKU 3.3 and now AKU 3.5, both of which also have the same issue.
Here is my device info:
OS: 5.1.342 (Build 15698.3.5.0)
ROM version: 2.50.00 WWE
ROM date: 09/20/06
Radio version: 1.09.00
Protocol version: 42.42.P8
ExtROM version: 1.30.162 WWE
Has anyone else seen this issue? Or more importantly, what ROM are you using that doesn't have this issue??
Many thanks.
Click to expand...
Click to collapse
i've had your problem, and solved it.
let me guess, you have a proxy configured to your internet settings - right?
if so, the activesync "inherits" those proxy settings (yes, from the ppc) and tries to use the same proxy - which it can't get to, because its using your home ISP and not the GPRS isp.
(i've checked this with a network sniffer (Ethereal) and i was right - the activesync tried to use the proxy that was configured on my device)
to prove you this is the case, create a blank, proxyless connection settings, and set "The Internet" and "My Work Network" to use it. (don't forget to check the V on "This network connects to the internet" on the connection's proxy settings.
after doing this, try to sync and voilla - it'll work.
to fix it permanently - read my how-to guide on using proxies.
http://forum.xda-developers.com/showthread.php?t=309108

Thanks for the info, shlomki. I think I may have explained my issue badly, as I think we're talking about different things.
When I talked about ActiveSync I meant on the PPC rather than through my PC. The problem I have is that for the first couple of hours I can get push email ok. But then my GPRS connection seems to get 'stuck' and ActiveSync for push email just hangs for a while trying to sychronize, but then fails.
Thanks again for the info.

oh, sorry, i misunderstood.
i don't know what can cause this..
maybe try to check if you can still browse the web when it happens? maybe its a issue with your connection..

Thanks shlomki, good advice. I noticed the GPRS login was the old o2wap, so I changed it to mobileweb and it seems a bit better. I wonder if it was some connection or bandwidth issue with the old login. However I will try what you suggest if I get it again and report back.

Well I've been using the newer O2 pay monthly GPRS login details and my connection seems a lot more solid! I've been testing over the last 24 hours and it's been working pretty consistent.

MMS on Three Australia with Schaps rom's

Has anyone been able to get MMS working on Three Australia??
I've been trying for the last few days and it's work with pretty much all other customized roms.. but this one is giving me issues? Maybe something to do with device identity on three servers or maybe this new version of arcsoft broke something???
I'm 100% certain settings are correct. I've tried with network setup wizard, and the following:
Gateway: 10.176.57.25
Port: 8799
Server address: http://mmsc.three.net.au:10021/mmsc
Connect via: (3 services connection, whatever it's called?) Mine is MY ISP
also tried with:
Server address: http://mmsc.three.com.au:10021/mmsc
No juice at all.. anyone else want to confirm on three Australia?? Oh and sorry about making a new thread for this.. I tried posting this in schaps thread but no response many times. I'm just looking for ANYONE to test and confirm this.

Also on Three Australia, running Schaps 3.54c. I don't usually use mms but just tried to send and it didn't work, using settings from the network wizard (checked against what I had previously sourced from aussie3g)
So it's not just you....

bigruss said:
Also on Three Australia, running Schaps 3.54c. I don't usually use mms but just tried to send and it didn't work, using settings from the network wizard (checked against what I had previously sourced from aussie3g)
So it's not just you....
Click to expand...
Click to collapse
Hey thanks for that.. just wanted to make sure I wasn't going crazy... It annoys me a bit, because I'm really REALLY loving this rom.. besides the mms thing, not one glitch and has everythign i need...

im running 3.54c and i am getting MMS with 3 Australia no issues at all. the settings are correct but as it has been posted before on other sites, you have to ring 3care and report a fault. tell them mms doesnt work just play along with them with regards to OS (stock 3 ROM) and settings.
they need to reset your 'individual profile' on the server. i had to get this done as MMS were not sending at all. it took about 3-4 days but i got fixed and MMS are working fine, send and receieve with only a minimal delay (2min max) between send and recieve.
just make sure your connect via settings has the APN 3services. Also WAP 2.0 and 300kb limit.
.... on another note 3.60a beta did not work with 3australia and the MMS settings, so i had to go back to 3.54c.....
Drooch

drooch said:
im running 3.54c and i am getting MMS with 3 Australia no issues at all. the settings are correct but as it has been posted before on other sites, you have to ring 3care and report a fault. tell them mms doesnt work just play along with them with regards to OS (stock 3 ROM) and settings.
they need to reset your 'individual profile' on the server. i had to get this done as MMS were not sending at all. it took about 3-4 days but i got fixed and MMS are working fine, send and receieve with only a minimal delay (2min max) between send and recieve.
just make sure your connect via settings has the APN 3services. Also WAP 2.0 and 300kb limit.
.... on another note 3.60a beta did not work with 3australia and the MMS settings, so i had to go back to 3.54c.....
Drooch
Click to expand...
Click to collapse
That's really strange... because the simcard and network is fine, i've tested it in other phones without issue.. i've been tru hell with mms before where it wouldn't send and then three did reset the profile and all was good. but this is a different issue and it's strange how it didn't work in the beta but it's working for you in 3.54c as techincally their both the same, it's just 3.60a beta is based on a new build of wm6.... and both are using the same version of arcsoft as well.

drooch said:
im running 3.54c and i am getting MMS with 3
just make sure your connect via settings has the APN 3services. Also WAP 2.0 and 300kb limit.
Drooch
Click to expand...
Click to collapse
Oh and one other thing I noticed... if you change to wap 2.0 so does the port number from 8799 (which it's supposed to be) to 8080 (which is the default for wap 2.0). I would double check your settings and see what their set to because it's not making much sense...

thats why the 3.60a ROM doesnt work.... it auto selects the port based on WAP version. the 3.54c version does not do this and therefore still works
Drooch

argh, why did I test this for you?! It's bugging me too now. I have the same situation where the port changes based on the wap version, running 3.54c (just checked in case I was being really stupid)
so it looks like we either have the wrong port or the wrong wap....
strange that it is working for one person.

drooch said:
thats why the 3.60a ROM doesnt work.... it auto selects the port based on WAP version. the 3.54c version does not do this and therefore still works
Drooch
Click to expand...
Click to collapse
Well actually 3.54c does do this (change the port to 8080 on wap2.0). Everyone else's post in here confirm this.
And too be honest.. i don't think that's what's causing the issues, because well wap1.2 should still work...

yes it does auto select a port number when u select the Wap version but if u overwrite it, it does not revert back to the original number, so u can select wap 2.0 and then overwrite the value back to 8799 and select ok. it should then stay on that port number.
I work in the industry and i must say that this issue only arises on cooked ROMS. i dont know if this will help but i have attached a hutchison file that was from the extrom of the dopod rom. i dont know what it contains but it may help
Drooch

drooch said:
yes it does auto select a port number when u select the Wap version but if u overwrite it, it does not revert back to the original number, so u can select wap 2.0 and then overwrite the value back to 8799 and select ok. it should then stay on that port number.
I work in the industry and i must say that this issue only arises on cooked ROMS. i dont know if this will help but i have attached a hutchison file that was from the extrom of the dopod rom. i dont know what it contains but it may help
Drooch
Click to expand...
Click to collapse
hmm.. well i'm running 3.54c and i can confirm.. if you change the port then hit ok.. go back into the settings and you'll see the port / wap version has been changed automatically for you...

well i dont know why thats happening.
did you set up a new configuration or overwrite the sample one??
ive been testing my phone since i saw this post and for some reason, if i select WAP 2.0 it will select Port 8080. i then overwrite it to 8799 and select ok.... never changes back to 8080 (unless i select WAP 2.0 again)

same happens with me, if I overwrite it will revert to the original. This happens with new and existing mms servers

drooch said:
well i dont know why thats happening.
did you set up a new configuration or overwrite the sample one??
ive been testing my phone since i saw this post and for some reason, if i select WAP 2.0 it will select Port 8080. i then overwrite it to 8799 and select ok.... never changes back to 8080 (unless i select WAP 2.0 again)
Click to expand...
Click to collapse
Are you sure your running 3.54c because outside of your post, no one else can confirm what your reporting...
Seems a bit strange...

i can confirm i am running -
ROM Version: Schap's 3.54c
ROM date: 07/05/07
Radio Version: 1.51.00.10
Protocol Version: 32.84.7020.20H
i can confirm also that this ROM can accept MMS send and recieve using 3australia with the settings that were mentioned in this post. i work for 3 and it took me 6 days of 3care communication to relsove the issue... they changed settings on their side on *my* account and now it works. the phone does not revert back to the 8080 port on *my* dopod838pro i could only get mms to work if i
a) installed the hutchison cab i posted before
b) DID NOT run the network wizard that cam with the ROM
c) entered the settings manually for connection and for MMS
d) overwrote the sample MMS settings
Drooch

drooch said:
i can confirm i am running -
ROM Version: Schap's 3.54c
ROM date: 07/05/07
Radio Version: 1.51.00.10
Protocol Version: 32.84.7020.20H
i can confirm also that this ROM can accept MMS send and recieve using 3australia with the settings that were mentioned in this post. i work for 3 and it took me 6 days of 3care communication to relsove the issue... they changed settings on their side on *my* account and now it works. the phone does not revert back to the 8080 port on *my* dopod838pro i could only get mms to work if i
a) installed the hutchison cab i posted before
b) DID NOT run the network wizard that cam with the ROM
c) entered the settings manually for connection and for MMS
d) overwrote the sample MMS settings
Drooch
Click to expand...
Click to collapse
Hmm.. thanks for all your help drooch... but i just don't see how it makes sense. I think you must be the exception. I know if I change the port to 8799 when i hit ok, and go back into the settings it's reading wap 1.2.
Also the network wizard just automates the manual input of settings, and i've looked over all the settings and can not find any differences between those and the ones listed here.
Not sure what the cab does either, but i installed it with out any luck and I've also set many times 3mms to the default connection for mms settings but it hasn't made any difference..
there is a glitch somewhere between us on three and this customized rom. I just wish I could find it already because I love the rom.

Network Wizard
I've had the same problem of WAP 2.0 selection defaulting to Port 8080 and it appears to be associated with running the Network Wizard.
I did a hard reset, entered the network settings manually then did the MMS settings - Port 8799, WAP Version 2.0, and everything worked.
So at least for 3 Australia, the advice is, don't run the network wizard, input your operator settings manually.
Cheers

finally someone that can back me up!
i assumed it was the network wizard but why??? (very weird!)
so to use 3MMS use the settings that were posted in the first post BUT DO NOT run network wizard, you must hard reset if u have used it.
Good luck,
Drooch

Ahh.. well thats some damn useful information!!!
I can't quite hard-reset my phone rite now either to test it, cuz I got too much stuff I need, but definitely handy info!!! I wonder if this applies to all roms??
And thanks drooch for your persistence In the end all we want is for stuff to work... looks like we may be getting it afterall